Theoretical Performance Limits for Coronagraphs on Obstructed and Unobstructed Apertures: How Much Can Current Designs Be Improved?
No abstract available
Belikov, Ruslan↗
SEARCH · Engineering Papers
Results for “theoretical limits”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High-temperature thermoelectric energy converstion. I - Theory
The high-temperature thermoelectric energy-conversion theory is examined. It is shown that semiconductors are the logical choices for high-figure of merit-value materials, but the requirements for optimization differ depending on whether the material is classed as a broad-band or narrow-band semiconductor. Optimization is discussed as a function of temperature. Phonon scattering mechanisms are considered; and for the reduction of thermal conductivity, basic material guidelines are given. Although experimental results indicate that ZT (where Z is the figure of merit and T is the temperature) of about 1 represents an upper limit, there is in fact, no theoretical limitation. It is unlikely that the Z values will be significantly reduced by radiation transfer at temperatures lower than 2000 K. The current status of materials research is also considered. The rare-earth chalcogenides which behave as n-type semi-conductors and the boron-rich borides which exhibit hopping p-type conductivity behavior are the materials that show promise for high-temperature Z values. The reasons for low thermal conductivities in these materials is discussed.
Wood, C.↗
Volcanic eruption detection with TOMS
The Nimbus 7 Total Ozone Mapping Spectrometer (TOMS) is designed for mapping of the atmospheric ozone distribution. Absorption by sulfur dioxide at the same ultraviolet spectral wavelengths makes it possible to observe and resolve the size of volcanic clouds. The sulfur dioxide absorption is discriminated from ozone and water clouds in the data processing by their spectral signatures. Thus, the sulfur dioxide can serve as a tracer which appears in volcanic eruption clouds because it is not present in other clouds. The detection limit with TOMS is close to the theoretical limit due to telemetry signal quantization of 1000 metric tons (5-sigma threshold) within the instrument field of view (50 by 50 km near the nadir). Requirements concerning the use of TOMS in detection of eruptions, geochemical cycles, and volcanic climatic effects are discussed.
Krueger, Arlin J.↗
Optimal Codes for the Burst Erasure Channel
Deep space communications over noisy channels lead to certain packets that are not decodable. These packets leave gaps, or bursts of erasures, in the data stream. Burst erasure correcting codes overcome this problem. These are forward erasure correcting codes that allow one to recover the missing gaps of data. Much of the recent work on this topic concentrated on Low-Density Parity-Check (LDPC) codes. These are more complicated to encode and decode than Single Parity Check (SPC) codes or Reed-Solomon (RS) codes, and so far have not been able to achieve the theoretical limit for burst erasure protection. A block interleaved maximum distance separable (MDS) code (e.g., an SPC or RS code) offers near-optimal burst erasure protection, in the sense that no other scheme of equal total transmission length and code rate could improve the guaranteed correctible burst erasure length by more than one symbol. The optimality does not depend on the length of the code, i.e., a short MDS code block interleaved to a given length would perform as well as a longer MDS code interleaved to the same overall length. As a result, this approach offers lower decoding complexity with better burst erasure protection compared to other recent designs for the burst erasure channel (e.g., LDPC codes). A limitation of the design is its lack of robustness to channels that have impairments other than burst erasures (e.g., additive white Gaussian noise), making its application best suited for correcting data erasures in layers above the physical layer. The efficiency of a burst erasure code is the length of its burst erasure correction capability divided by the theoretical upper limit on this length. The inefficiency is one minus the efficiency. The illustration compares the inefficiency of interleaved RS codes to Quasi-Cyclic (QC) LDPC codes, Euclidean Geometry (EG) LDPC codes, extended Irregular Repeat Accumulate (eIRA) codes, array codes, and random LDPC codes previously proposed for burst erasure protection. As can be seen, the simple interleaved RS codes have substantially lower inefficiency over a wide range of transmission lengths.
Hamkins, Jon↗
Speed limits of aircraft
This paper is restricted to the question of attainable speed limits and attacks the problem from different angles. Theoretical limits due to air resistance are presented along with design factors which may affect speed such as wing loads, wing areas, wing section shifting, landing speeds, drag-lift ratios, and power coefficients.
Everling, E↗
Bosch Process Technology Development for Air Revitalization
Closed-loop Environmental Control and Life Support Systems (ECLSS) aim to fully recover resources needed to keep astronauts alive in space– primarily, this means reclaiming oxygen (O2) to breathe and water (H2O) to drink from metabolic products. In air revitalization, this requires reclaiming the oxygen tied up in metabolic carbon dioxide (CO2). The current state of the art for the International Space Station (ISS) uses a Sabatier reaction in a system that has demonstrated a 50% O2 recovery rate. While there are several ongoing projects to improve the recovery of the Sabatier-based process, there are also projects working on an alternative approach centered around the Bosch process. Unlike the Sabatier, which has theoretical limits on maximum O2 recovery, the Bosch process can theoretically recover all of the O2 trapped in metabolic CO2 with only solid carbon (C) as a byproduct. However, the C generated in the process poses a significant challenge, introducing issues with clogging, contamination, and catalyst degradation that ultimately make the Bosch process unfeasible for flight at the current state of development. This poster overviews the promise and challenges of the Bosch process, prior investigations conducted, and current work towards advancing the TRL of Bosch-based O2 recovery systems and dealing with the (C) buildup. It also discusses potential uses of the carbon itself, which could prove to be a useful product in in-situ resource utilization (ISRU) applications.
Lunar↗
Ultrasonic Doppler measurement of renal artery blood flow
An extensive evaluation of the practical and theoretical limitations encountered in the use of totally implantable CW Doppler flowmeters is provided. Theoretical analyses, computer models, in-vitro and in-vivo calibration studies describe the sources and magnitudes of potential errors in the measurement of blood flow through the renal artery, as well as larger vessels in the circulatory system. The evaluation of new flowmeter/transducer systems and their use in physiological investigations is reported.
Freund, W. R.↗
The role of high resolution observations in determining energy release and transport processes
With present observations from the Solar Maximum Mission, we are seeing a very selective sample of spatially large flares in the soft part (10 to 50 keV) of the hard X-ray spectrum. The spatial resolution is at best 5600 km with a corresponding time resolution of 4.5 s for adequate count statistics. This resolution gives rise to the following problems: We cannot resolve the minor radii of the loops involved or tell where and how the energy release occurs. The manner in which loops interact and the relationship between the soft and hard or approx 00 keV) parts of hard X-rays remains elusive. We cannot see how energy propagates in most cases. Thus it is desirable to determine the minimum increase in spatial and temporal resolution required to solve these problems. Spatially we need to resolve the minor radius of a small loop which is about 800 km or 1 arc s. Upper limits to observed speeds of conduction fronts and shocks are approx km/s with theoretical limits running about a factor of 2 higher. Thus, a compatible minimum time resolution is in the range of 0.2 to 0.4 s. With these spatial and temporal resolutions, sufficient count statistics are required to go up to approx 120 keV with a sufficient number of energy bands to obtain spectra.
Smith, D. F.↗
Stability of laser oscillator systems
One of the goals of the Stanford University-NASA Laser-In-space Technology Experiment (SUNLITE) program is to develop ultrastable optical frequency oscillators that can lead to high resolution time standards and ultimately standard clocks. During the past year or two there was remarkable progress towards achieving in the laboratory the fundamental quantum limits for the frequency stability of nonplanar ring oscillator (NPRO) lasers. The quantum theoretical limits for laser oscillator stability are reviewed, measured stability levels compared, and some applications of such ultrastable laser oscillator systems suggested.
Hafele, Joseph C.↗
Theory for low-frequency modulated Langmuir wave packets
Langmuir wave packets with low frequency modulations (or beats) observed in the Jovian foreshock are argued to be direct evidence for the Langmuir wave decay L yields L-prime + S. In this decay, 'pump' Langmuir waves L, driven by an electron beam, produce backscattered product Langmuir waves L-prime and ion sound waves S. The L and L-prime waves beat at the frequency and wavevector of the S waves, thereby modulating the wave packets. Beam speeds calculated using the modulated Jovian wave packets (1) are reasonable, at 4-10 times the electron thermal speed, (2) are consistent with theoretical limits on the decay process, and (3) decrease with increasing foreshock depth, as expected theoretically. These results strongly support the theory. The modulation depth of some wave packets suggests saturation by the decay L yields L-prime + S. Applications to modulated Langmuir packets in the Venusian and terrestrial foreshocks and in a type III radio source are proposed.
Cairns, Iver H.↗
Fundamental mode oscillation of a buried ridge waveguide laser array
An eight-element phase-locked array of index-guided separate confinement ridge AlGaAs diode lasers is fabricated. In this array the absorption of light in the region between lasers is negligible and the gain profile across the array is nearly uniform. Unlike most other arrays, this array oscillates in its fundamental mode. Stable radiation patterns of near diffraction-limited single narrow beam with 1.6 deg width are obtained. The beam width approaches the theoretical limit for the present array structure.
Mukai, S.↗
Imaging performance of annular apertures. VI - Limitations by optical surface deviations
The performance of optical systems is limited by imperfect optical surfaces that degrade the images below the level set by wave theoretical limits. The central irradiance functions are derived for slit and circular apertures with five distributions of wavefront errors and for a range of maximal wavefront deviations. For practical frequency of occurrence distributions of wavefront deviations, the point spread and the image energy integral functions are determined. Practical performances of optical systems are derived and performance limits discussed.
Tschunko, Hubert F. A.↗
von Neumann's Law: Theoretical and Microgravity Experimental Comparison for Coarsening Diffusion in Bubble Lattices
The effects of gravity in influencing the theoretical limit for bubble lattice coarsening and aging behavior, otherwise called von Neumann's law, is examined theoretically and experimentally. Preliminary microgravity results will be discussed.
Noever, David A.↗
Addressing the Limit of Detectability of Residual Oxide Discontinuities in Friction Stir Butt Welds of Aluminum using Phased Array Ultrasound
This activity seeks to estimate a theoretical upper bound of detectability for a layer of oxide embedded in a friction stir weld in aluminum. The oxide is theoretically modeled as an ideal planar layer of aluminum oxide, oriented normal to an interrogating ultrasound beam. Experimentally-measured grain scattering level is used to represent the practical noise floor. Echoes from naturally-occurring oxides will necessarily fall below this theoretical limit, and must be above the measurement noise to be potentially detectable.
Johnston, P. H.↗
Design of helicopter rotor blades for optimum dynamic characteristics
The possibilities and the limitations of tailoring blade mass and stiffness distributions to give an optimum blade design in terms of weight, inertia, and dynamic characteristics are investigated. Changes in mass or stiffness distribution used to place rotor frequencies at desired locations are determined. Theoretical limits to the amount of frequency shift are established. Realistic constraints on blade properties based on weight, mass moment of inertia size, strength, and stability are formulated. The extent hub loads can be minimized by proper choice of EL distribution is determined. Configurations that are simple enough to yield clear, fundamental insights into the structural mechanisms but which are sufficiently complex to result in a realistic result for an optimum rotor blade are emphasized.
Peters, D. A.↗
Stability of negatively charged dust grains in Saturn's ring plane
The boundary between the inner and outer parts of Saturn's B ring is located at the theoretical limit of stability of dust grains with large negative charge to mass ratio. A grain inside of this stability limit will move along magnetic field lines and strike Saturn if given a slight velocity component normal to the ring plane. Outside of this marginal stability radius, a perturbed grain merely oscillates back and forth through the ring plane. The theoretical location of the marginal stability radius is at 1.625 Saturn radius. Observations by Pioneer 11 and Voyager 2 in the infared see the boundary as a prominent change in ring brightness at this radius. The occultation of delta-Scorpii by the rings in the ultraviolet seen by Voyager 2 shows about a factor of two change in optical depth beginning very close to this radius.
Northrop, T. G.↗
Ultimate temperature stability of a magnetic refrigerator
In recent years there has been an interest in using adiabatic demagnetization refrigeration in space to cool bolometers to the 0.1-0.3 K temperature range. Two different demagnetization schemes have been proposed for such refrigerators. Both methods start the same way: an isothermal magnetization followed by an adiabatic demagnetization. Once the operating temperature is reached, the two methods differ. The first method uses feedback control to perform an isothermal demagnetization. As reported, this system is limited by the resolution of the analog-to-digital converter used. While the stability of this system is the best reported to date (0.5 mK at 200 mK for 14 h), it is several orders of magnitude worse than the theoretical limit. The second method uses a complete demagnetization and allows the temperature to drift up uncontrolled. This system has the disadvantage that the responsivity and noise of a bolometer will also drift, and so will require continuous recalibration. There is some concern that fluctuations in the temperature control system of the first method would adversely affect the bolometer performance by increasing the system noise. The purpose of this note is to present the ultimate stability limit of an isothermal demagnetization feedback control system.
Kittel, P.↗
Design of helicopter rotor blades for optimum dynamic characteristics
The possibilities and limitations of tailoring blade mass and stiffness distributions to give an optimum blade design in terms of weight, inertia, and dynamic characteristics are discussed. The extent that changes in mass of stiffness distribution can be used to place rotor frequencies at desired locations is determined. Theoretical limits to the amount of frequency shift are established. Realistic constraints on blade properties based on weight, mass, moment of inertia, size, strength, and stability are formulated. The extent that the hub loads can be minimized by proper choice of E1 distribution, and the minimum hub loads which can be approximated by a design for a given set of natural frequencies are determined. Aerodynamic couplings that might affect the optimum blade design, and the relative effectiveness of mass and stiffness distribution on the optimization procedure are investigated.
Peters, D. A.↗