Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “terpyridine”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

31 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Methyl Termination of p-Type Silicon Enables Selective Photoelectrochemical CO 2 Reduction by a Molecular Ruthenium Catalyst

Methyl-terminated p-type silicon photoelectrodes selectively drive CO 2 reduction by a homogeneous [Ru(tpy)(Mebim-py)(NCCH 3 )] 2+ catalyst (tpy = 2,2′:6′,2″-terpyridine, Mebim-py = 1-methylbenzimidazol-2-ylidene-3-(2′-pyridine)). A 460 mV photovoltage is quantified for the photoelectrode. Under 1 sun illumination, this system achieves a Faradaic efficiency of 87% for CO at −1.7 V vs Fc +/0 , matching reports of the same catalyst at metallic electrodes operating at −2.1 V. When 5% water is introduced, the CH 3 -terminated Si photoelectrode remains stable, selectivity for CO is retained, and current density increases. Methyl termination suppresses the competitive hydrogen evolution observed for H-terminated Si photoelectrodes, which under the same conditions produce ca. 60% CO and 8% H 2 and have unstable performance. Furthermore, these results establish that a semiconductor photoelectrode can power a molecular CO 2 reduction catalyst without hydrogen evolution by the photoelectrode itself. Methyl termination of p-Si allows CO 2 reduction to kinetically outcompete proton reduction, revealing an important design principle for selective fuel formation.

Catalysts↗
DOE OSTI2026

Incorporation of Ion Transport Chains into Multivariate MOF for Improved Water Oxidation

The climate crisis demands clean energy technologies to cut CO 2 emissions from fossil fuels. Hydrogen fuel cells and solar-driven CO 2 reduction are promising, but both rely on efficient water oxidation. Polypyridyl ruthenium complexes are active catalysts for water oxidation; however, they exhibit poor stability and recyclability. Our group improved performance by embedding these complexes into metal−organic frameworks (MOFs). As water oxidation is pH-dependent, proton management further enhances reactivity. To address the issue, we introduced proton transfer pathways into the MOF structure. Specifically, we incorporated −SO 3 H groups onto the biphenyl linkers of UiO-67 loaded with [Ru(tpy)(dcbpy)OH 2 ]PF 6 catalyst (where tpy = 2,2′:6′,2″-terpyridine; dcbpy = 5,5-dicarboxy-2,2′- bipyridine). The sulfonated MOF exhibited a 2.5-fold increase in oxygen evolution compared to the nonsulfonated analogue. After 1 h of electrolysis, the sulfonated MOF exhibited a turnover number of 25 for oxygen evolution reaction compared to 10 for the native MOF, demonstrating the benefits of built-in proton management.

Catalysts↗
DOE OSTI2024

Direct Evidence for a Sequential Electron Transfer–Proton Transfer Mechanism in the PCET Reduction of a Metal Hydroxide Catalyst

Here, the proton-coupled electron transfer (PCET) mechanism for the reaction M ox -OH + e − + H + → M red -OH 2 was de-termined through kinetic resolution of the independent electron transfer (ET) and proton transfer (PT) steps. The reaction of interest was triggered by visible light excitation of [Ru II (tpy)(bpy′)H 2 O] 2+ , Ru II -OH 2 , where tpy is 2,2′:6′,2″-terpyridine and bpy′ is 4,4′-diaminopropylsilatrane-2,2′-bipyridine, anchored to In 2 O 3 :Sn (ITO) thin films in aqueous solutions. Interfacial kinetics for the PCET reduction reaction were quantified by nanosecond transient absorption spectroscopy as a function of solution pH and applied potential. Data acquired from pH = 5-10 revealed a stepwise electron-transfer proton-transfer (ET-PT) mechanism, while kinetic measurements made below the pK a (Ru III -OH/OH 2 ) = 1.3 were used to study the analogous interfacial reaction where electron transfer was the only mechanistic step. Analysis of this data with a recently reported multi-channel kinetic model was used to construct a PCET zone diagram and supported the assignment of an ET-PT mechanism from pH = 5-10. Ultimately, this study represents a unique example amongst M ox -OH/M red -OH 2 reactivity where the protona-tion and oxidation state of the intermediate was kinetically and spectrally resolved to firmly establish the PCET mechanism.

Charge transfer↗
DOE OSTI2025

Electron Inversion and Tunneling at Silicon Thermal Oxide Interfaces for Solar-Driven Molecular Catalysis to Syngas

Semiconductor photoelectrodes are regularly coupled to solid-state heterogeneous catalysts to perform solar-driven reduction of CO 2 . Less frequently, molecular catalysts are employed to better control the reactivity toward desired products, yet the development of robust semiconductor/molecule interfaces has proven challenging. Here, we demonstrate that a 2–3 nm thermal oxide layer on Si exhibits stability in aqueous solution, high photovoltage, and a photocurrent density of ∼10 mA/cm 2 for the solar-driven photoelectrochemical reduction of a homogeneous molecular catalyst, producing syngas with an ∼2:1 H 2 to CO ratio. Because of a low defect density, the oxide interface forms an electron inversion layer with metal-like electron density at cathodic potentials. This inversion layer facilitates electron transfer to redox-active molecules via tunneling even if the molecule’s reduction potential is beyond the semiconductor’s conduction band edge. Using an electrolyte solution composed of a homogeneous cobalt bis(terpyridine) catalyst in a water/organic solvent mixture, stable photoelectrochemistry was observed under 1-sun illumination, exhibiting an ∼30% Faradaic efficiency for CO that was similar to a glassy carbon electrode under comparable conditions. Furthermore, the results demonstrate that an ultrathin thermal oxide interface is a robust platform for development of aqueous-stable, molecule-driven photoelectrocatalysis.

Catalysts↗
DOE OSTI2025

Reticular Structural Diversification of Zirconium Metal–Organic Frameworks Through Angular Ligand Configuration Control

Reticular chemistry offers practical guidelines for enlarging and enriching the arsenal of metal–organic frameworks (MOFs). However, reticular expansion to access mesoporous structures remains challenging due to limitations in achieving precise control over both the size and configuration during building units’ extension. Herein, we combine ligand isomerization and functionalization strategies to regulate the ligand configuration by systematically replacing aryl C–H groups with N atoms, resulting in angular dicarboxylate ligands with various symmetries. The assembly between a 4,4′-(pyridine-2,6-diyl)dibenzoic acid ligand (1N, C 2 symmetry) and 12-connected Zr 6 cluster leads to the formation of a pseudo ftw topology framework (NU-2611), where one pair of nose-to-nose 1N ligands resembles a tetra-topic ligand. When a 6,6′-(1,3-phenylene)dinicotinic acid ligand (2N, C S symmetry) was used, another pseudo ftw network NU-2612 was obtained with a 2-fold framework interpenetration. Interestingly, the planar [2,2′:6′,2″-terpyridine]-5,5″-dicarboxylic acid ligand (3N, C 2V symmetry) yielded an intriguing mesoporous Zr-MOF with kag topology. NU-2613 represents the first example of kag Zr-MOF designed to include large, well-defined mesopores. The diversity of these MOFs was further enhanced through post-synthetic metalation of linkers. Particularly, metalation of the chelating 3N ligand with Fe 3+ in NU-2613 enables efficient catalytic transformation within the functionalized channels. This work contributes insight into the reticular expansion of Zr-MOFs by finely-tuning the ligand planarity, advancing the structure diversification of mesoporous frameworks for specific applications.

Cluster chemistry↗
DOE OSTI2025

Probing the subtle differences between promethium and curium

Curium and promethium share similar chemical and physical properties thereby complicating their separation. Co-located processing at Oak Ridge National Laboratory results in curium contamination of the fission product stream containing promethium. To gain insight into the difficulty of this separation, the fundamental properties of these elements are experimentally and computationally probed in a 2,2’:6’,2”-terpyridine crystal system. Analysis of the isostructural compounds via single crystal X-ray diffraction and quantum theory of atoms in molecules reveals that bonding between promethium and curium is quite similar in this particular structure type. The small differences in the analysis of these two elements in this isostructural series sheds light on the difficulty required to separate the elements from each other. More so, this study develops the fundamental chemistries of two rare elements in the solid state and experimentally portrays the often-omitted position of promethium within the lanthanide series.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Optical sensing of aqueous nitrate anion by a platinum( II ) triimine salt based solid state material

Selective and quantitative measurement of aqueous nitrate (NO 3 – ) anion is achieved using solid [Pt(Cl-4-tpy)Cl]ClO 4 salt (Cl-4-tpy = 4-chloro-2,2':6'2''-terpyridine), and as the salt supported on controlled porous glass. This detection method relies on the color change of the Pt(II) complex from yellow to red and intense luminescence response upon ClO 4 – exchange with NO 3 – due to concomitant enhancement of Pt∙∙∙Pt interactions. Finally, the spectroscopic response is highly selective for NO 3 – over a large range of halides and oxoanions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Experimental determination of the magnetic anisotropy in five-coordinated Co( II ) field-induced single molecule magnets

Magnetic anisotropy of the central metal atom is a crucial property of single molecule magnets (SMMs). Small structural changes can alter the magnetic properties, and accurate experimental methods to investigate magnetic anisotropy are therefore critical. Here, we investigate two five-coordinated Co( II ) SMMs, [CoCl 2 Cltpy] (1) and [CoBr 2 Cltpy] (2) (Cltpy = 4′-chloro-2,2′:6′,2′′-terpyridine), through multiple techniques. Ab initio theoretical calculations performed on the two compounds show that both possess axial magnetic anisotropy with the magnetic easy axis pointing towards one of the terminal halogen atoms. Theoretical calculations on SMMs are typically done on isolated molecular species, and to validate this approximation the magnetic anisotropy was further studied through experimental techniques. EPR measurements confirm an axial anisotropy of 1, and magnetic measurements provide experimental Zero-Field Splitting (ZFS) parameters, showing that the values from theoretical calculations are slightly overestimated. The X-ray electron density determined from 20 K single-crystal synchrotron X-ray diffraction data provides estimated d-orbital populations also suggesting axial magnetic anisotropy in both systems, and furthermore suggesting a more pronounced axiality in 1 compared to 2. This is in good agreement with the results obtained from both magnetic measurements and theoretical calculations. The magnetic anisotropy of 1 is quantified experimentally through polarized powder neutron diffraction via the site susceptibility method, confirming an axial magnetic anisotropy of the compound. A slight deviation in the easy axis direction is observed between experimental and theoretical results. This, together with the overestimation of the ZFS parameters from theoretical calculations, shows that experimental investigation of the magnetic anisotropy of SMMs is of high relevance. Magnetic anisotropy of the central metal atom is a crucial property of single molecule magnets (SMMs).

Slavensky, Hannah H. [Aarhus Univ. (Denmark)] (ORC↗
DOE OSTI2025

Photosynthesis of CO from CO 2 with an iron polypyridyl catalyst at a passivated silicon photoelectrode

A first-row transition metal catalyst, [Fe(tpy)(Mebim-py)(NCCH 3 )] 2+ (tpy = 2,2′:6′,2′′-terpyridine, Mebim-py = 1-methylbenzimidazol-2-ylidene-3-(2′-pyridine)) mediates CO 2 reduction to CO at passivated p-Si photoelectrodes with applied potentials 240 mV positive of the standard CO 2 /CO reduction potential. The molecular catalyst's selectivity for CO was retained under photoelectrochemical conditions, with negligible direct proton reduction promoted by the photoelectrode. The faradaic efficiency for CO (44 ± 6%) was slightly enhanced relative to the catalyst performance in the dark (33%). A photosynthetic cell based on this photocathode system, coupled with ferrocene oxidation at the anode, successfully operated at a cell voltage of −1.2 V. The photovoltage generated by illumination of p-Si–CH 3 met and surpassed the potential required for CO 2 reduction when coupled with ferrocene oxidation. By leveraging a low-overpotential CO 2 reduction electrocatalyst, a photo-assisted electrochemical efficiency of 0.15% and applied bias photon-to-current efficiency of 0.05% was achieved for this single-junction cell, ultimately storing 46 kJ mol −1 (11 kcal mol −1 ) of photon energy.

Carbon Dioxide Reduction↗
DOE OSTI2023

Sterically attenuated electronic communication in cobalt complexes of meridional isoquinoline-derived ligands for applications in electrocatalysis

The ability to synthetically tune the ligand frameworks of redox-active molecules is of critical importance to the economy of solar fuels because manipulating their redox properties can afford control over the operating potentials of sustained electrocatalytic or photoelectrocatalytic processes. The electronic and steric properties of 2,2′:6′,2″-terpyridine (Terpy) ligand frameworks can be tuned by functional group substitution on ligand backbones, and these correlate strongly to their Hammett parameters. The synthesis of a new series of tridentate meridional ligands of 2,4,6-trisubstituted pyridines that engineers the ability to finely tune the redox potentials of cobalt complexes to more positive potentials than that of their Terpy analogs is achieved by aryl-functionalizing at the four-position and by including isoquinoline at the two- and six-positions of pyridine (Aryl-DiQ). Their cobalt complex syntheses, their electronic properties, and their catalytic activity for carbon dioxide (CO2) reduction are reported and compared to their Terpy analogs. The cobalt derivatives generally experience a positive shift in their redox features relative to the Terpy-based analogs, covering a complementary potential range. Although those evaluated fail to produce any quantifiable products for the reduction of CO2 and suffer from long-term instability, these results suggest possible alternate strategies for stabilizing these compounds during catalysis. We speculate that lower equilibrium association constants to the cobalt center are intrinsic to these ligands, which originate from a steric interaction between protons on the pyridine and isoquinoline moieties. Nevertheless, the new Aryl-DiQ ligand framework has been engineered to selectively tune homoleptic cobalt complexes’ redox potentials.

Chemistry↗
DOE OSTI2023

Metal-ligand catalysts for selective promotion of electrochemical CO 2 RR

The electrochemical carbon dioxide reduction reaction (CO 2 RR) provides opportunities to synthesize value-added products from this greenhouse gas in a sustainable manner. Efficient catalysts for this reaction are provided that selectively drive CO 2 reduction over the thermodynamic and kinetically competitive hydrogen evolution reaction (HER) in organic or aqueous electrolytes. The catalysts are metal-polypyridyl coordination complexes of a redox non-innocent terpyridine-based pentapyridine ligand and a first-row transition metal. The metal-ligand cooperativity in [Fe(tpyPY2Me)]2+ drives the electrochemical reduction of CO 2 to CO at low overpotentials with high selectivity for CO 2 RR (>90%).

Derrick, Jeffrey S.↗
DOE OSTI2023

Hourglass–Shaped Nanocages with Concaved Structures Based on Selective Self–Complementary Coordination Ligands and Tunable Hierarchical Self–Assembly

Three-dimensional (3D) structures constructed via coordination-driven self-assemblies have recently garnered increasing attention due to the challenges in structural design and potential applications. In particular, developing new strategy for the convenient and precise self-assemblies of 3D supramolecular structures is of utmost interest. Introducing the concept of self-coordination ligands, herein the design and synthesis of two meta-modified terpyridyl ligands with selective self-complementary coordination moiety are reported and their capability to assemble into two hourglass-shaped nanocages SA and SB is demonstrated. Within these 3D structures, the meta-modified terpyridyl unit preferably coordinates with itself to serve as concave part. By changing the arm length of the ligands, hexamer (SA) and tetramer (SB) are obtained respectively. In-depth studies on the assembly mechanism of SA and SB indicate that the dimers could be formed first via self-complementary coordination and play crucial roles in controlling the final structures. Moreover, both SA and SB can go through hierarchical self-assemblies in solution as well as on solid–liquid interface, which are characterized by transmission electron microscope (TEM) and scanning tunneling microscopy (STM). As a result, it is further demonstrated that various higher-order assembly structures can be achieved by tuning the environmental conditions.

3D metallo-supramolecules↗