Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “tensor product”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

A tensor approach to modeling of nonhomogeneous nonlinear systems

Model following control methodology plays a key role in numerous application areas. Cases in point include flight control systems and gas turbine engine control systems. Typical uses of such a design strategy involve the determination of nonlinear models which generate requested control and response trajectories for various commands. Linear multivariable techniques provide trim about these motions; and protection logic is added to secure the hardware from excursions beyond the specification range. This paper reports upon experience in developing a general class of such nonlinear models based upon the idea of the algebraic tensor product.

Yurkovich, S.↗
NASA NTRS1982

Fitting multidimensional splines using statistical variable selection techniques

This report demonstrates the successful application of statistical variable selection techniques to fit splines. Major emphasis is given to knot selection, but order determination is also discussed. Two FORTRAN backward elimination programs using the B-spline basis were developed, and the one for knot elimination is compared in detail with two other spline-fitting methods and several statistical software packages. An example is also given for the two-variable case using a tensor product basis, with a theoretical discussion of the difficulties of their use.

Smith, P. L.↗
NASA NTRS1982

Curve fitting and modeling with splines using statistical variable selection techniques

The successful application of statistical variable selection techniques to fit splines is demonstrated. Major emphasis is given to knot selection, but order determination is also discussed. Two FORTRAN backward elimination programs, using the B-spline basis, were developed. The program for knot elimination is compared in detail with two other spline-fitting methods and several statistical software packages. An example is also given for the two-variable case using a tensor product basis, with a theoretical discussion of the difficulties of their use.

Smith, P. L.↗
NASA NTRS1985

Contouring Trivariate Data

In many applications, the data consist of discrete 3-D points at which one or more parameters are given. To display contours, the data are represented by a continuous function which is evaluated at any point as needed for contouring. Contouring results are presented which are applicable both to artitrarily spaced data and to data which lie on a topologically rectangular three dimensional grid. the contours are assumed to be described by 3-D display lists for viewing on a dynamic color graphics device; that is, they will not simply be projected into 2-D and viewed as a static image on a frame buffer. Dynamic viewing of color contours may be essential to the proper interpretation of results. The gridded data lie on a topologically rectangular grid although two or more nodes may be the same point. Parametric tensor product methods may be used to fit the gridded data and to generate the contours. Rectangular elements are convenient but not necessary. For example, there are other methods which are effective for contouring over tetrahedral elements.

Stead, S. E.↗
NASA NTRS1986

The algorithms for rational spline interpolation of surfaces

Two algorithms for interpolating surfaces with spline functions containing tension parameters are discussed. Both algorithms are based on the tensor products of univariate rational spline functions. The simpler algorithm uses a single tension parameter for the entire surface. This algorithm is generalized to use separate tension parameters for each rectangular subregion. The new algorithm allows for local control of tension on the interpolating surface. Both algorithms are illustrated and the results are compared with the results of bicubic spline and bilinear interpolation of terrain elevation data.

Schiess, J. R.↗
NASA NTRS1987

An algorithm for surface smoothing with rational splines

Discussed is an algorithm for smoothing surfaces with spline functions containing tension parameters. The bivariate spline functions used are tensor products of univariate rational-spline functions. A distinct tension parameter corresponds to each rectangular strip defined by a pair of consecutive spline knots along either axis. Equations are derived for writing the bivariate rational spline in terms of functions and derivatives at the knots. Estimates of these values are obtained via weighted least squares subject to continuity constraints at the knots. The algorithm is illustrated on a set of terrain elevation data.

Schiess, James R.↗
NASA NTRS1986

A spectral element method for the simulation of unsteady incompressible flows with heat transfer

The spectral element method is a high-order finite element technique for solution of the Navier-Stokes and energy equations. In the isoparametric spectral element discretization, the domain is broken up into general brick elements, and the dependent and independent variables represented as high-order tensor-product Lagrangian interpolants through Chebyshev collocation points. The nonlinear and convective terms in the governing equations are treated with explicit collocation, while the pressure and diffusive contributions are handled implicitly using variational projection operators. The method is applied to flow past a cylinder, flow in grooved channels, and natural convection in an enclosure.

Karniadakis, George E.↗
NASA NTRS1989

An implicit and stiffly stable finite element CFD algorithm for unsteady aerodynamics

A stable and accurate finite element CFD algorithm for hyperbolic/incompletely parabolic conservation law systems is described and verified. It combines a Taylor weak statement FEM, an optimal implicit Runge-Kutta time integration algorithm, and a matrix tensor product approximate factorization linear algebra procedure. The results of computational experiments show that the developed algorithm is robust.

Baker, A. J.↗
NASA NTRS1990

Some Aspects of Essentially Nonoscillatory (ENO) Formulations for the Euler Equations, Part 3

An essentially nonoscillatory (ENO) formulation is described for hyperbolic systems of conservation laws. ENO approaches are based on smart interpolation to avoid spurious numerical oscillations. ENO schemes are a superset of Total Variation Diminishing (TVD) schemes. In the recent past, TVD formulations were used to construct shock capturing finite difference methods. At extremum points of the solution, TVD schemes automatically reduce to being first-order accurate discretizations locally, while away from extrema they can be constructed to be of higher order accuracy. The new framework helps construct essentially non-oscillatory finite difference methods without recourse to local reductions of accuracy to first order. Thus arbitrarily high orders of accuracy can be obtained. The basic general ideas of the new approach can be specialized in several ways and one specific implementation is described based on: (1) the integral form of the conservation laws; (2) reconstruction based on the primitive functions; (3) extension to multiple dimensions in a tensor product fashion; and (4) Runge-Kutta time integration. The resulting method is fourth-order accurate in time and space and is applicable to uniform Cartesian grids. The construction of such schemes for scalar equations and systems in one and two space dimensions is described along with several examples which illustrate interesting aspects of the new approach.

Chakravarthy, Sukumar R.↗
NASA NTRS1989

Spectral element methods for the incompressible Navier-Stokes equations

Spectral element methods are high-order weighted-residual techniques for partial differential equations that combine the geometric flexibility of finite element techniques with the rapid convergence rate of spectral schemes. The theoretical foundations and numerical implementation of spectral element methods for the incompressible Navier-Stokes equations are presented, considering the construction and analysis of optimal-order spectral element discretizations for elliptic and saddle (Stokes) problems, as well as the efficient solution of the resulting discrete equations by rapidly convergent tensor-product-based iterative procedures. Several examples of spectral element simulation of moderate Reynolds number unsteady flow in complex geometry are presented.

Maday, Yvon↗
NASA NTRS1990

Application of implicit numerical techniques to the solution of the three-dimensional diffusion equation

Implicit techniques for calculating three-dimensional, time-dependent heat diffusion in a cube are tested with emphasis on storage efficiency, accuracy, and speed of calculation. For this purpose, a tensor product technique with both Chebyshev collocation and finite differences and a generalized conjugate gradient technique with finite differences are used in conjunction with Crank-Nicolson discretization. An Euler explicit finite difference calculation is performed for use as a benchmark. The implicit techniques are found to be competitive with the Euler explicit method in terms of storage efficiency and speed of calculation and offer advantages both in accuracy and stability. Mesh stretching in the finite difference calculations is shown to markedly improve the accuracy of the solution.

Peltier, Leonard Joel↗
NASA NTRS1991

A globally well-posed finite element algorithm for aerodynamics applications

A finite element CFD algorithm is developed for Euler and Navier-Stokes aerodynamic applications. For the linear basis, the resultant approximation is at least second-order-accurate in time and space for synergistic use of three procedures: (1) a Taylor weak statement, which provides for derivation of companion conservation law systems with embedded dispersion-error control mechanisms; (2) a stiffly stable second-order-accurate implicit Rosenbrock-Runge-Kutta temporal algorithm; and (3) a matrix tensor product factorization that permits efficient numerical linear algebra handling of the terminal large-matrix statement. Thorough analyses are presented regarding well-posed boundary conditions for inviscid and viscous flow specifications. Numerical solutions are generated and compared for critical evaluation of quasi-one- and two-dimensional Euler and Navier-Stokes benchmark test problems.

Iannelli, G. S.↗
NASA NTRS1991

Enhancement of surface definition and gridding in the EAGLE code

Algorithms for smoothing of curves and surfaces for the EAGLE grid generation program are presented. The method uses an existing automated technique which detects undesirable geometric characteristics by using a local fairness criterion. The geometry entity is then smoothed by repeated removal and insertion of spline knots in the vicinity of the geometric irregularity. The smoothing algorithm is formulated for use with curves in Beta spline form and tensor product B-spline surfaces.

Thompson, Joe F.↗
NASA NTRS1992

Renormalization group analysis of the Reynolds stress transport equation

The pressure velocity correlation and return to isotropy term in the Reynolds stress transport equation are analyzed using the Yakhot-Orszag renormalization group. The perturbation series for the relevant correlations, evaluated to lowest order in the epsilon-expansion of the Yakhot-Orszag theory, are infinite series in tensor product powers of the mean velocity gradient and its transpose. Formal lowest order Pade approximations to the sums of these series produce a fast pressure strain model of the form proposed by Launder, Reece, and Rodi, and a return to isotropy model of the form proposed by Rotta. In both cases, the model constant are computed theoretically. The predicted Reynolds stress ratios in simple shear flows are evaluated and compared with experimental data. The possibility is discussed of driving higher order nonlinear models by approximating the sums more accurately.

Rubinstein, R.↗
NASA NTRS1990

Application of three-dimensional Bezier patches in grid generation

Bezier and B-spline patches are popular tools in surface modeling. With these methods, a surface is represented by the tensor product of univariate approximations. The extension of this concept to three dimensions is obvious and can be applied to the problem of grid generation. This report will demonstrate how three dimensional patches can be used in solid modeling and in the generation of grids. Examples will be given demonstrating the ability to generate three dimensional grids directly from a wire frame without having to first set up the boundary surfaces. Many geometric grid properties can be imposed by the proper choice of the control net.

Mastin, C. Wayne↗
NASA NTRS1992

Application of three-dimensional Bezier patches in grid generation

Bezier and B-spline patches are popular tools in surface modeling. With these methods, a surface is represented by the tensor product of univariate approximations. The extension of this concept to three-dimensions is obvious and can be applied to the problem of grid generation. This report will demonstrate how three-dimensional patches can be used in solid modeling and in the generation of grids. Examples will be given demonstrating the ability to generate three-dimensional grids directly from a wire frame without having to first set up the boundary surfaces. Many geometric grid properties can be imposed by the proper choice of the control net.

Mastin, C. Wayne↗
NASA NTRS1992

A non-linearly stable implicit finite element algorithm for hypersonic aerodynamics

A generalized curvilinear coordinate Taylor weak statement implicit finite element algorithm is developed for the two-dimensional and axisymmetric compressible Navier-Stokes equations for ideal and reacting gases. For accurate hypersonic simulation, air is modeled as a mixture of five perfect gases, i.e., molecular and atomic oxygen and nitrogen as well as nitric oxide. The associated pressure is then determined via Newton solution of the classical chemical equilibrium equation system. The directional semidiscretization is achieved using an optimal metric data Galerkin finite element weak statement, on a developed 'companion conservation law system', permitting classical test and trial space definitions. Utilizing an implicit Runge-Kutta scheme, the terminal algorithm is then nonlinearly stable, and second-order accurate in space and time on arbitrary curvilinear coordinates. Subsequently, a matrix tensor product factorization procedure permits an efficient numerical linear algebra handling for large Courant numbers. For ideal- and real-gas hypersonic flows, the algorithm generates essentially nonoscillatory numerical solutions in the presence of strong detached shocks and boundary layer-inviscid flow interactions.

Iannelli, G. S.↗
NASA NTRS1992

Calculation of two-dimensional shear-driven cavity flows at high Reynolds numbers

The time-dependent Navier-Stokes equations are numerically integrated for two-dimensional incompressible viscous flow in a shear-driven square cavity. Using a time-splitting method and finite differences on a staggered mesh, the momentum and pressure equations are directly solved by a tensor product method where one finite difference direction is diagonalized by eigenvalue decomposition. The effects of increasing Reynolds number are studied and the developing boundary layer is captured by using a finely clustered mesh. At Re = 30,000 the flow is in a continuously developing unsteady regime. Power spectrum plots indicate that the unsteady flow oscillates with one fundamental frequency and exhibits some characteristics of transition between laminar and turbulent states.

Huser, A.↗