SEARCH · Engineering Papers

Results for “sustainable computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS2003

Computation of Jet Screech Noise

The space-time conservation-element and solution-element method is employed to numerically study the near-field screech-tone noise of a typical underexpanded circular jet issuing from a sonic nozzle. Both axisymmetric and fully three-dimensional computations are carried out. The self-sustained feedback loop is properly simulated. The computed shock-cell structure, acoustic wave length, screech-tone frequency, and sound-pressure levels are in good agreement with existing experimental results.

Hultgren, Lennart S.↗

NASA NTRS2003

Flexwall Hydraulic Hose Replacement in the NASA Glenn 10- by 10-Foot Supersonic Propulsion Wind Tunnel

Smith, Larry E.↗

NASA NTRS1987

On a criterion for vortex breakdown

A criterion for the onset of vortex breakdown is proposed. Based upon previous experimental, computational, and theoretical studies, an appropriately defined local Rossby number is used to delineate the region where breakdown occurs. In addition, new numerical results are presented which further validate this criterion. A number of previous theoretical studies concentrating on inviscid standing-wave analyses for trailing wing-tip vortices are reviewed and reinterpreted in terms of the Rossby number criterion. Consistent with previous studies, the physical basis for the onset of breakdown is identified as the ability of the flow to sustain such waves. Previous computational results are reviewed and re-evaluated in terms of the proposed breakdown criterion. As a result, the cause of breakdown occurring near the inflow computational boundary, common to several numerical studies, is identified. Finally, previous experimental studies of vortex breakdown for both leading edge and trailing wing-tip vortices are reviewed and quantified in terms of the Rossby number criterion.

Spall, R. E.↗

NASA NTRS1987

A criterion for vortex breakdown

Spall, R. E.↗

NASA NTRS1986

A view of Kanerva's sparse distributed memory

Pentti Kanerva is working on a new class of computers, which are called pattern computers. Pattern computers may close the gap between capabilities of biological organisms to recognize and act on patterns (visual, auditory, tactile, or olfactory) and capabilities of modern computers. Combinations of numeric, symbolic, and pattern computers may one day be capable of sustaining robots. The overview of the requirements for a pattern computer, a summary of Kanerva's Sparse Distributed Memory (SDM), and examples of tasks this computer can be expected to perform well are given.

Denning, P. J.↗

NASA NTRS2004

Numerical Simulation of the Oscillations in a Mixer: An Internal Aeroacoustic Feedback System

The space-time conservation element and solution element method is employed to numerically study the acoustic feedback system in a high temperature, high speed wind tunnel mixer. The computation captures the self-sustained feedback loop between reflecting Mach waves and the shear layer. This feedback loop results in violent instabilities that are suspected of causing damage to some tunnel components. The computed frequency is in good agreement with the available experimental data. The physical phenomena are explained based on the numerical results.

Jorgenson, Philip C. E.↗

NASA NTRS1991

An implicit three-dimensional Navier-Stokes solver for compressible flow

A three-dimensional numerical method based on the lower-upper symmetric-Gauss-Seidel implicit scheme in conjunction with the flux-limited dissipation model is developed for solving the compressible Navier-Stokes equations. A new computer code which is based on this method requires only 9 microsec per grid-point per iteration on a single processor of a Cray YMP computer and executes at the sustained rate of 170 MFLOPS. A reduction of 4 orders of magnitude in the residual for a high Reynolds number flow using 230 K grid points is obtained in 24 minutes. The computational results compare well with available experimental data.

Yoon, Seokkwan↗

NASA NTRS1997

Activities and Accomplishments of ICAM

A brief historical background on establishing the Institute for Computational and Applied Mechanics (ICAM) is presented and basic goals and objectives are discussed. It is emphasized that the goal of the ICAM has been to develop and maintain a self-sustaining center of excellence in computational methods at Old Dominion University (ODU). Information is provided on funding sources and budget disposition, recent activities and accomplishments, list of graduate students supported on the program, and number of students who received graduate degrees (M.S. as well as Ph.D.). Information is also provided on research coordination with various scientists and engineers, and on different reports specifically written for ICAM. ICAM has been supported, in part, by NASA Langley Research Center through Grant NAG-1-363. This report constitutes the final report for ICAM for the period ending December 1996. The grant has been monitored by the University Affairs Officers at NASA Langley.

Tiwari, S. N.↗

NASA NTRS2002

Micro-Mechanical Modeling of Ductile Fracture in Welded Aluminum-Lithium Alloys

This study describes a 3-D computational framework to model stable extension of a macroscopic crack under mode I conditions in ductile metals. Material separation occurs through a local fracture mechanism based on the growth and coalescence of micro voids dispersed in the material. The Gurson-Tvergaard plasticity model for void materials describes the eventual loss of material stress capacity under sustained loading. Fixed-sized computational cell elements defined on a thin layer adjacent to the crack plane provide an implicit length scale for continuum damage model. Outside this layer, the material remains undamaged by void growth, consistent with metallurgical observations. The key micro-mechanics parameters are D, the thickness of cell layer, and f 0 , the initial cell porosity.

Ahmed Ibrahim↗

NASA NTRS2019

Workforce for the Future Development of Space Access Vehicles

The development of advanced vehicles that will travel between planetary surfaces with atmospheres and space requires the availability of experimental and computational capabilities that accomplish the research leading to new technologies and the development, test, and evaluation (RDT&E) of new flight systems. The United States is at risk of not having the required RDT&E workforce – qualified and in sufficient numbers – in place and ready to meet the future market’s commercial and defense needs. Systemic challenges include uncertain Federal budgets that limit and interrupt government research and development, the projectized nature of new space access systems that drive boom/bust cycles, an aging aerospace workforce (compounded by a mid-age demographic gap), limited to declining investment in sustaining and advancing experimental and computational tools infrastructure, lack of standards for sharing (and leveraging) data, dramatically changing technologies, changing social norms, and potentially large increases in commercial market needs. Flight systems have mission-based trajectories to and from space and designers must ensure risk is properly assessed across the entire trajectory. Thus, physics questions must be answered at each stage of flight, which requires a suite of experimental and computational tools. The RDT&E workforce utilizing these tools include subject matter experts from the producers, interested in acquiring data and information on the product, and from the capabilities being utilized, interested in addressing the product customer’s needs (providing robust data collection techniques, data quality, timeliness – available when needed, efficient with cost management, and teaming on data analysis). This requires a range of skills – in addition to aerospace, other engineers, and software developers, a highly trained and certified craft and technician workforce is critical to future success. This paper will present a human resources construct that addresses the system of needs for people – including, but more than just technical skills and an application of that construct in the hypersonic Test and Evaluation (T&E) community. This is part of a larger AIAA effort to document challenges and associated best practices for the aerospace RDT&E workforce.

Steven C Dunn↗

NASA NTRS1995

The acoustic characteristics of turbomachinery cavities

Internal fluid flows are subject not only to self-sustained oscillations of the purely hydrodynamic type but also to the coupling of the instability with the acoustic mode of the surrounding cavity. This situation is common to turbomachinery, since flow instabilities are confined within a flow path where the acoustic wavelength is typically smaller than the dimensions of the cavity and flow speeds are low enough to allow resonances. When acoustic coupling occurs, the fluctuations can become so severe in amplitude that it may induce structural failure of engine components. The potential for catastrophic failure makes identifying flow-induced noise and vibration sources a priority. In view of the complexity of these types of flows, this report was written with the purpose of presenting many of the methods used to compute frequencies for self-sustained oscillations. The report also presents the engineering formulae needed to calculate the acoustic resonant modes for ducts and cavities. Although the report is not a replacement for more complex numerical or experimental modeling techniques, it is intended to be used on general types of flow configurations that are known to produce self-sustained oscillations. This report provides a complete collection of these models under one cover.

Lucas, M. J.↗

NASA NTRS2001

Near Field Screech Noise Computation for an Underexpanded Supersonic Jet by the CE/SE Method

The space-time conservation element and solution element (CE/SE) method is employed to numerically study the near-field axisymmetric screech-tone noise of a typical underexpanded circular jet issuing from a sonic nozzle. For the computed cases, corresponding to fully expanded Mach numbers of 1.10, 1.15 and 1.19, the self-sustained feedback loop is automatically established. The computed shock-cell structure, acoustic wave length, screech tone frequencies, and sound pressure levels are in good agreement with experimental results.

Loh, Ching Y.↗

NASA NTRS1982

Boundary integral equation method calculations of surface regression effects in flame spreading

A solid-phase conduction problem that is a modified version of one that has been treated previously in the literature and is applicable to flame spreading over a pyrolyzing fuel is solved using a boundary integral equation (BIE) method. Results are compared to surface temperature measurements that can be found in the literature. In addition, the heat conducted through the solid forward of the flame, the heat transfer responsible for sustaining the flame, is also computed in terms of the Peclet number based on a heated layer depth using the BIE method and approximate methods based on asymptotic expansions. Agreement between computed and experimental results is quite good as is agreement between the BIE and the approximate results.

Altenkirch, R. A.↗

NASA NTRS2010

Application-Controlled Parallel Asynchronous Input/Output Utility

A software utility tool has been designed to alleviate file system I/O performance bottlenecks to which many high-end computing (HEC) applications fall prey because of the relatively large volume of data generated for a given amount of computational work. In an effort to reduce computing resource waste, and to improve sustained performance of these HEC applications, a lightweight software utility has been designed to circumvent bandwidth limitations of typical HEC file systems by exploiting the faster inter-processor bandwidth to move output data from compute nodes to designated I/O nodes as quickly as possible, thereby minimizing the I/O wait time. This utility has successfully demonstrated a significant performance improvement within a major NASA weather application.

Clune, Thomas↗

NASA NTRS1994

Performance and the NAS Parallel Benchmarks

This talk will describe the NAS (National Aerospace Standards) Parallel Benchmarks, which are now widely cited in the high performance computing field as a measure of sustained performance on realistic scientific applications. The latest performance results will be included. It will be shown that significant progress has been made by several systems during the past year or so, with sustained performance on a par with the best conventional systems, and with performance per dollar significantly exceeding the conventional systems. This talk will also describe many of the pitfalls of performance reporting, and will give advice on how to avoid such pitfalls. The overall state of the field of high performance computing will also be discussed.

Bailey, David H.↗

NASA NTRS2002

Computing Jet Screech: a Complex Aeroacoustic Feedback System

The space-time conservation-element and solution-element method is employed to numerically study the near-field axisymmetric screech-tone noise of a typical underexpanded circular jet issuing from a sonic nozzle. For the computed case, corresponding to a fully expanded Mach number of 1.19, the self-sustained feedback loop is established without artificial means. The computed shock-cell structure, acoustic wave length, screech tone frequency, and sound pressure levels are in good agreement with existing experimental results

Loh, Ching Y.↗

NASA NTRS1998

SEMS: System for Environmental Monitoring and Sustainability

The goal of this project was to establish a computational and data management system, SEMS, building on our existing system and MTPE-related research. We proposed that the new system would help support Washington University's efforts in environmental sustainability through use in: (a) Problem-based environmental curriculum for freshmen and sophomores funded by the Hewlett Foundation that integrates scientific, cultural, and policy perspectives to understand the dynamics of wetland degradation, deforestation, and desertification and that will develop policies for sustainable environments and economies; (b) Higher-level undergraduate and graduate courses focused on monitoring the environment and developing policies that will lead to sustainable environmental and economic conditions; and (c) Interdisciplinary research focused on the dynamics of the Missouri River system and development of policies that lead to sustainable environmental and economic floodplain conditions.

Arvidson, Raymond E.↗

NASA NTRS1993

Upper limits to the nightside ionosphere of Mars

The nightside ionosphere of Mars could be produced by electron precipitation or by plasma transport from the dayside, by analogy to the Venus, but few measurements are available. We report here model calculations of upper limits to the nightside ion densities on Mars that would be produced by both mechanisms. For the auroral model, we have adopted the downward traveling portions of the electron spectra measured by the HARP instrument on the Soviet Phobos spacecraft in the Martian plasma sheet and in the magnetotail lobes. For the plasma transport case, we have imposed on a model of the nightside thermosphere, downward fluxes of O(+), C(+), N(+), NO(+) and O2(+) that are near the maximum upward fluxes that can be sustained by the dayside ionosphere. The computed electron density peaks are in the range (1.3 - 1.9) x 10 exp 4/cu cm at altitudes of 159 to 179 kin. The major ion for all the models is O2(+), but significant differences in the composition of the minor ions are found for the ionospheres produced by auroral precipitation and by plasma transport. The calculations reported here provide a guide to the data that should be acquired during a future aeronomy mission to Mars, in order to determine the sources of the nightside ionosphere.

Fox, J. L.↗