Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface transformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Tracking Active Phase Behavior on Boron Nitride during the Oxidative Dehydrogenation of Propane Using Operando X-ray Raman Spectroscopy

Hexagonal boron nitride (hBN) is a highly selective catalyst for the oxidative dehydrogenation of propane (ODHP) to propylene. Using a variety of ex situ characterization techniques, the activity of the catalyst has been attributed to the formation of an amorphous boron oxyhydroxide surface layer. The ODHP reaction mechanism proceeds via a combination of surface mediated and gas phase propagated radical reactions with the relative importance of both depending on the surface-to-void-volume ratio. Here we demonstrate the unique capability of operando X-ray Raman spectroscopy (XRS) to investigate the oxyfunctionalization of the catalyst under reaction conditions (1 mm outer diameter reactor, 500 to 550 °C, P = 30 kPa C 3 H 8 , 15 kPa O 2 , 56 kPa He). We probe the effect of a water cofeed on the surface of the activated catalyst and find that water removes boron oxyhydroxide from the surface, resulting in a lower reaction rate when the surface reaction dominates and an enhanced reaction rate when the gas phase contribution dominates. Computational description of the surface transformations at an atomic-level combined with high precision XRS spectra simulations with the OCEAN code rationalize the experimental observations. Finally, this work establishes XRS as a powerful technique for the investigation of light element-containing catalysts under working conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Doping-driven topological polaritons in graphene/$\alpha$-MoO 3 heterostructures

Control over charge carrier density provides an efficient way to trigger phase transitions and modulate the optoelectronic properties of materials. This approach can also be used to induce topological transitions in the optical response of photonic systems. Here we report a topological transition in the isofrequency dispersion contours of hybrid polaritons supported by a two-dimensional heterostructure consisting of graphene and α-phase molybdenum trioxide. By chemically changing the doping level of graphene, we observed that the topology of polariton isofrequency surfaces transforms from open to closed shapes as a result of doping-dependent polariton hybridization. Moreover, when the substrate was changed, the dispersion contour became dominated by flat profiles at the topological transition, thus supporting tunable diffractionless polariton propagation and providing local control over the optical contour topology. We achieved subwavelength focusing of polaritons down to 4.8% of the free-space light wavelength by using a 1.5-μm-wide silica substrate as an in-plane lens. Our findings could lead to on-chip applications in nanoimaging, optical sensing and manipulation of energy transfer at the nanoscale.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Limit Cycle Oscillating Detonation Wave Behavior Analysis Within a Rotating Detonation Engine

Limit cycle oscillation (LCO) detonation wave behaviors are presented and analyzed for test times exceeding 20 s in a water-cooled rotating detonation engine (RDE). LCO detonation waves exhibit cyclic acceleration and deceleration, resulting in oscillating wave spacing at unique process conditions. In previous RDE studies, similar behaviors have been studied as microsecond-scale instabilities leading to ascending or descending modal transitions. In the current work, however, LCO waves are considered a persistent wave mode, occupying unique portions of the operational envelope adjacent to those of their equally spaced counterparts. These occurrences of LCO waves are repeatable, enduring behaviors. A method to generate shifted contour surfaces specifically intended to extract and analyze wave spacing variation through time, termed limit cycle oscillation visualization (LCOV) surfaces, is presented. LCOV surfaces transform data into the reference frame of a primary traveling wave and are used to analyze quasi-steady, short-timescale, and transitional LCO modes. Results are leveraged to understand the relationship between fill height, wave strength, local wave acceleration, and subsequent LCO wave spacing for individual wave sets. In conclusion, quasi-steady LCO waves display wave spacing oscillations between equal spacing values associated with ±1 wave across runs exceeding 18 s.

33 ADVANCED PROPULSION SYSTEMS↗
NASA NTRS1972

Propagation and application of waves in the ionosphere.

This review deals with the propagation of waves, especially radio waves in the ionosphere. In the macroscopic electromagnetic theory, the mathematical structure of wave propagation problems depends entirely on the properties of the dielectric operator in a magnetically nonpermeable medium. These properties can be deduced from general discussions of symmetry and considerations of physical principles. When the medium is specifically the ionosphere, various physical phenomena may occur. Because of a large number of parameters, it is desirable to define a parameter space. A point in the parameter space corresponds to a specific plasma. The parameter space is subdivided into regions whose boundaries correspond to conditions of resonance and cutoff. As the point crosses these boundaries, the refractive index surface transforms continuously.

Yeh, K. C.↗
NASA NTRS1993

Thermal history of comets during residence in the Oort cloud - Effect of radiogenic heating in combination with the very low thermal conductivity of amorphous ice

The thermal history of long-period comets initially composed of amorphous ice is studied. It is shown that such comets with a small nucleus thermal conductivity (kappa) experience a runaway increase in the internal temperature during residence in the Oort cloud. The temperature increase is a result of rapid release of the latent heat at crystallization triggered by gradual heating due to decay of radioactive nuclides. The time of the runaway temperature increase is about ten to a hundred million years after the formation of the nucleus depending on the fraction of refractory grains which contain radioactive nuclides. Most of the amorphous ice in the nuclides except just beneath the surface transforms into crystalline ice due to the runaway temperature increase. This implies that the ice in short-period comets is crystalline from the initial time when the long-period comet becomes a short-period one. In comets with large kappa the temperature does not rise much compared to the small kappa case and the initial amorphous ice is preserved. A criterion for the crystallization of the nucleus ice is derived.

Haruyama, Jun'ichi↗
DOE OSTI2022

Changes in electric field noise due to thermal transformation of a surface ion trap

Here, we aim to illuminate how the microscopic properties of a metal surface map to its electric field noise characteristics. In our system, prolonged heat treatments of a metal film can induce a rise in the magnitude of the electric field noise generated by the surface of that film. We refer to this heat-induced rise in noise magnitude as a thermal transformation. The underlying physics of this thermal transformation process is explored through a series of heating, milling, and electron treatments performed on a single surface ion trap. Between these treatments, 40 Ca + ions trapped 70 μm above the surface of the metal are used as detectors to monitor the electric field noise at frequencies close to 1 MHz. An Auger spectrometer is used to track changes in the composition of the contaminated metal surface. With these tools we investigate contaminant deposition, chemical reactions, and atomic restructuring as possible drivers of thermal transformations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Organic matter transformations are disconnected between surface water and the hyporheic zone

Abstract. Biochemical transformations of organic matter (OM) are a primary driver of river corridor biogeochemistry, thereby modulating ecosystem processes at local to global scales. OM transformations are driven by diverse biotic and abiotic processes, but we lack knowledge of how the diversity of those processes varies across river corridors and across surface and subsurface components of river corridors. To fill this gap we quantified the number of putative biotic and abiotic transformations of organic molecules across diverse river corridors using ultra-high-resolution mass spectrometry. The number of unique transformations is used here as a proxy for the diversity of biochemical processes underlying observed profiles of organic molecules. For this, we use public data spanning the contiguous United States (ConUS) from the Worldwide Hydrobiogeochemical Observation Network for Dynamic River Systems (WHONDRS) consortium. Our results show that surface water OM had more biotic and abiotic transformations than OM from shallow hyporheic zone sediments (1–3 cm depth). We observed substantially more biotic than abiotic transformations, and the numbers of biotic and abiotic transformations were highly correlated with each other. We found no relationship between the number of transformations in surface water and sediments and no meaningful relationships with latitude, longitude, or climate. We also found that the composition of transformations in sediments was not linked with transformation composition in adjacent surface waters. We infer that OM transformations represented in surface water are an integrated signal of diverse processes occurring throughout the upstream catchment. In contrast, OM transformations in sediments likely reflect a narrower range of processes within the sampled volume. This indicates decoupling between the processes influencing surface water and sediment OM, despite the potential for hydrologic exchange to homogenize OM. We infer that the processes influencing OM transformations and the scales at which they operate diverge between surface water and sediments.

58 GEOSCIENCES↗
DOE OSTI2023

Analysis of an Arctic cold air outbreak during autumn and related air mass transformations forced by surface changes and advection in higher altitudes

During marine cold air outbreaks (MCAOs), cold and dry Arctic air masses are transported from the central Arctic southward across the closed sea ice and much warmer open oceans. They experience significant transformations including a rapid heating and moistening, often leading to cloud formation. While intense wintertime MCAOs have been analyzed widely, the air mass transformations during other seasons have been studied sparsely. We address this gap by investigating an MCAO case observed in September 2020. To study the transformation processes, we combine the fifth generation of atmospheric reanalyses of the global climate (ERA5), trajectory calculations, as well as shipborne and airborne measurements. In the central Arctic, observations acquired from aboard the research vessel (RV) Polarstern during the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition characterized the initial state of the air mass over closed sea ice. Trajectories indicated the pathway the air mass took from RV Polarstern southward to the Fram Strait. For the first 24 h of the southbound drift, the air masses remained quasi-stationary. Then, still 15 h ahead of the marginal sea ice zone, differential advection across the boundary layer flow introduced humidity and clouds at higher altitudes between 1.5 and 2.5 km. ERA5-derived temperature and humidity tendencies indicated complex vertical interactions. Radiative cloud-top cooling, entrainment, and turbulence were significantly reduced in the lower and enhanced in the upper advected cloud layer. Eventually, the lower cloud deck dissipated. After this confluence of 2 different air masses, observations gathered by Polar 5 in Fram Strait as part of the MOSAiC Airborne observations in the Central Arctic campaign revealed cloudy, moist layers throughout the lowest 3.5 km and an increasing boundary layer height. Comparing the initial with the final state 48 h later, the largest net heating of +8 K was found close to the surface, yet the largest net moistening of +2.5 g kg -1 at an altitude of 1 km, as the initial profile was exceptionally dry here. We conclude that the observed air mass transformations were driven by the surface changes from sea ice to open ocean but additionally strongly impacted by the differential advection of clouds and moisture across the near-surface MCAO flow.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Surface Water Mass Transformation in the Southern Ocean: The Role of Eddies Revisited

The water mass transformation (WMT) framework describes how water of one class, such as a discrete interval of density, is converted into another class via air–sea fluxes or interior mixing processes. Here, this paper investigates how this process is modified at the surface when mesoscale ocean eddies are present, using a state-of-the-art high-resolution climate model with reasonable fidelity in the Southern Ocean. The method employed is to coarse-grain the high-resolution model fields to remove eddy signatures, and compare the results with those from the full model fields. This method shows that eddies reduced the WMT by 2–4 Sv (10%–20%; 1 Sv ≡ 10 6 m 3 s −1 ) over a wide range of densities, from typical values of 20 Sv in the smoothed case. The corresponding water mass formation was reduced by 40% at one particular density increment, namely, between 1026.4 and 1026.5 kg m −3 , which corresponds to the lighter end of the range of Indian Ocean Mode Water in the model. The effect of eddies on surface WMT is decomposed into three terms: direct modulation of the density outcrops, then indirectly, by modifying the air–sea density flux, and the combined effect of the two, akin to a covariance. It is found that the first and third terms dominate, i.e., smoothing the outcrops alone has a significant effect, as does the combination of smoothing both outcrops and density flux distributions, but smoothing density flux fields alone has little effect. Results from the coarse-graining method are compared to an alternative approach of temporally averaging the data. Implications for climate model resolution are also discussed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Electric Field Measurements at the Surface of a Piezoelectric Transformer for Plasma Jet Formation using the Plasma Research Facility at Sandia National Laboratory (Final Report)

The overall goal of this research is to understand how low-temperature non-equilibrium plasmas form directly off the surface of piezoelectric crystals. Specifically, this project aims to temporally and spatially resolve how the electric field evolves on and near the surface of a piezoelectric transformer (PT) at conditions that produce an atmospheric-pressure air plasma jet emanating from the corner of the PT. In this work, we used the Plasma Research Facility (PRF) at Sandia National Laboratory to conduct temporally- and spatially-resolved electric field induced second harmonic (E-FISH) measurements of the electric field at and near the surface of a piezoelectric transformer, providing a fundamental understanding of how piezoelectric crystals can be used for plasma generation. We carried out two Objectives: Objective 1 – The first objective was to measure the temporal and spatial evolution of the electric field along the surfaces approaching the corner of a rectangular PT just below conditions that lead to plasma jet formation. Such a measurement can be used to explain when and where the electric field peaks, leading to plasma formation; Objective 2 – The second objective was to measure the temporal and spatial evolution of the electric field along the surfaces approaching the corner of a rectangular PT just at conditions of plasma jet formation. This, in principle, gives a more accurate determination of how the electric field leads to plasma formation but is more difficult due to the relatively stochastic plasma jet behavior of a PT. This work was complemented by an award from the Sandia PRF, and we worked with Dr. Edward Barnat at the Sandia PRF to carry out these objectives.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1976

A transformation method for deriving from a photograph, position and heading of a vehicle in a plane

Equations have been derived that transform perspectively viewed planar surface coordinates, as seen in a photograph, into coordinates of the original plane surface. These transformation equations are developed in terms of nine geometric variables that define the photographic setup and are redefined in terms of eight parameters. The parameters are then treated as independent quantities that fully characterize the transformation and are expressed directly in terms of the four corner coordinates of a reference rectangle in the object plane and their coordinates as seen in a photograph. Vehicle position is determined by transforming the perspectively viewed coordinate position of a representative vehicle target into runway coordinates. Vehicle heading is determined from the runway coordinates of two vehicle target points. When the targets are elevated above the plane of the reference grid, the computation of the heading angle is unaffected; however, the computation of the target position may require adjustment of two parameters. Methods are given for adjusting the parameters for elevation and an example is included for both nonelevated and elevated target conditions.

Sleeper, R. K.↗
NASA NTRS1994

Towards a Comprehensive Computational Simulation System for Turbomachinery

The objective of this work is to develop algorithms associated with a comprehensive computational simulation system for turbomachinery flow fields. This development is accomplished in a modular fashion. These modules includes grid generation, visualization, network, simulation, toolbox, and flow modules. An interactive grid generation module is customized to facilitate the grid generation process associated with complicated turbomachinery configurations. With its user-friendly graphical user interface, the user may interactively manipulate the default settings to obtain a quality grid within a fraction of time that is usually required for building a grid about the same geometry with a general-purpose grid generation code. Non-Uniform Rational B-Spline formulations are utilized in the algorithm to maintain geometry fidelity while redistributing grid points on the solid surfaces. Bezier curve formulation is used to allow interactive construction of inner boundaries. It is also utilized to allow interactive point distribution. Cascade surfaces are transformed from three-dimensional surfaces of revolution into two-dimensional parametric planes for easy manipulation. Such a transformation allows these manipulated plane grids to be mapped to surfaces of revolution by any generatrix definition. A sophisticated visualization module is developed to al-low visualization for both grid and flow solution, steady or unsteady. A network module is built to allow data transferring in the heterogeneous environment. A flow module is integrated into this system, using an existing turbomachinery flow code. A simulation module is developed to combine the network, flow, and visualization module to achieve near real-time flow simulation about turbomachinery geometries. A toolbox module is developed to support the overall task. A batch version of the grid generation module is developed to allow portability and has been extended to allow dynamic grid generation for pitch changing turbomachinery configurations. Various applications with different characteristics are presented to demonstrate the success of this system.

Shih, Ming-Hsin↗
NASA NTRS2022

High-Resolution Imaging of Supraglacial Hydrological Features on the Greenland Ice Sheet with NASA’s Airborne Topographic Mapper (ATM) Instrument Suite

Seasonal meltwater pools on the surface of the Greenland Ice Sheet (GrIS) during late spring and summer in lakes on the surface and transforms the ice sheet's surface into a wet environment in the ablation zone below the equilibrium line. These supraglacial lakes in topographic lows on the ice surface are connected by a dendritic pattern of meandering streams and channels that together form a hydrological system consisting of supra-, en-, and subglacial components. Here, we use lidar data from NASA's Airborne Topographic Mapper (ATM) instrument suite and high-resolution optical imagery collected as part of Operation IceBridge (OIB) in spring 2019 over the GrIS to develop methods for the study of supraglacial hydrological features. While airborne surveys have a limited temporal and spatial coverage compared to imaging spaceborne sensors, their high footprint density and high-resolution imagery reveal a level of detail that is currently not obtainable from spaceborne measurements. The accuracy and resolution of airborne measurements complement spaceborne measurements, can support calibration and validation of spaceborne methods, and provide information necessary for high-resolution process studies of the supraglacial hydrological system on the GrIS that currently cannot be achieved from spaceborne observations alone.

ATM↗
NASA NTRS2020

Mercury Lander: Transformative Science from the Surface of the Innermost Planet

As an end-member of terrestrial planet formation, Mercury holds unique clues about the original distribution of elements in the earliest stages of solar system development and how planets and exoplanets form and evolve in close proximity to their host stars. This Mercury Lander mission concept enables in situ surface measurements that address several fundamental science questions raised by MESSENGER’s pioneering exploration of Mercury. Such measurements are needed to understand Mercury’s unique mineralogy and geochemistry; to characterize the proportionally massive core’s structure; to measure the planet’s active and ancient magnetic fields at the surface; to investigate the processes that alter the surface and produce the exosphere; and to provide ground truth for current and future remote datasets. NASA’s Planetary Mission Concept Studies (PMCS) program awarded this study to a multidisciplinary team led by Dr. Carolyn Ernst of the Johns Hopkins Applied Physics Laboratory (APL), to evaluate the feasibility of accomplishing transformative science through a New-Frontiers-class, landed mission to Mercury in the next decade. The resulting mission concept achieves one full Mercury year (~88 Earth days) of surface operations with an ambitious, high-heritage, landed science payload, corresponding well with the New Frontiers mission framework.

Mercury lander↗
NASA NTRS1995

Life as a planetary phenomenon: the colonization of Mars

Life is a planet-wide phenomenon in which its components incessantly move and interact. Life imperatively recycles its parts at the surface of the Earth in a chemical transformation and physical transport that depends utterly on the energy from a recent star, the Sun. Humanity, entirely dependent on other beings, plays a recent and relatively small part in the great phenomenon of life that transports and transforms the surface of the Earth. Our species accelerates but does not dominate the metabolism of the Earth system. Ironically, during the Apollo days of the sixties, fears were rampant that Martian or other extraterrestrial "germs" might "contaminate" our planet. After Viking, such fears are seen as the manifestation of cultural paranoia. The Viking missions complemented ground-based astronomical observation and yielded definitive evidence for the lack of life on the red planet. The Gaia hypothesis states that the surface temperature, composition of the reactive gases, oxidation state, alkalinity-acidity on today's Earth are kept homeorrhetically at values set by the sum of the activities of the current biota. Life, in other words, not only produces and maintains its immediate environment, but appears on Earth only as a planetary phenomenon. Since the natural tendency of all life is to grow exponentially to fill proximal volume, the question now "can life ecopoietically expand to Mars?" is entirely equivalent to the query of "can Gaia reproduce?".

Non-NASA Center↗