Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface emissivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Secondary electron emission for reticulated carbon foam surfaces using direct measurements and spectroscopic analysis

This study investigates secondary electron emission (SEE) characteristics of reticulated foams using direct measurements and analytical modeling. Total SEE was quantified, revealing suppression of up to 44% in carbon foam structures compared to planar graphite surfaces. An optimal geometric configuration was identified and supported by analytical models. SEE angular dependence experiments showed diverse behaviors: fiber-like behavior and directional dependence for pore and ligaments on the mm scale, with fuzz-like characteristics when the foam features are between 10–100 µm. Electron energy analyzer measurements showed that carbon foams preferentially suppress inelastic backscattered electrons (BSEs) more so than true secondary electrons (SEs). The analysis indicated a larger fraction of low-energy SE generation in foams compared to flat surfaces due to increased emission from curved fiber ligaments and tertiary SEs from high-energy BSEs. These findings have implications for design and optimization of materials with tailored electron emission properties for applications like plasma-facing components, spacecraft materials, and accelerator surfaces.

Auger↗
DOE OSTI2024

Probing Thermal Transport in Fluidized Bed Using Modulated Photothermal Radiometry

Abstract In concentrated solar power (CSP) applications, fluidized bed is a promising approach for high heat transfer coefficient (HTC) solar receivers and heat exchangers. However, the complexity of multiphase mixing has made it difficult to characterize and analyze the heat transfer mechanism. This paper presents an experimental study on simultaneously characterizing heat transfer in both the near-wall and the bulk regions of a fluidized bed using modulated photothermal radiometry (MPR). The MPR is a non-contact frequency-domain technique using an intensity-modulated laser as the heat source and surface infrared emission as thermometry. The thermal penetration depth of the laser heating is varied by controlling its modulation frequency, and thus the measurement can resolve the near-wall and the bulk thermal resistances. With the MPR technique, we measured fluidized silica sands with a mean size of 164 μm in a vertical channel of 6 mm depth. Our results show that the near-wall thermal resistance is substantially increased with increasing gas velocity, which partially offsets the benefit of higher HTC brought by stronger particle mixing during the fluidization. We also used the MPR to quantify the improvement in particle-wall heat transfer in an inclined channel. We found that an 8° inclination towards the heat exchanging side led to a lower near-wall thermal resistance and a higher HTC at high gas velocities. This work demonstrates that the MPR technique is a useful tool to quantify the important near-wall thermal resistance from a bulk particle bed, which not only advances our understanding of heat transfer in fluidized beds, but may also contribute to the design of fluidized bed heat exchangers with higher HTC.

14 SOLAR ENERGY↗
DOE OSTI2026

Emissivity measurements of CuCrZr alloy

The Facility for Rare Isotope Beams (FRIB) heavy-ion accelerator, in user operation since 2022, produces rare isotope beams via interactions of high-intensity stable ion beams with a graphite production target. Approximately 20–40% of the primary beam power is deposited in the target, while the remaining 60–80% is absorbed by the beam dump. The minichannel beam dump (MCBD), currently operated at 20 kW and designed for operation up to 50 kW, uses CuCrZr alloy absorber plates. Thermal validation and thermal cycling tests of the MCBD were conducted at the Applied Research Laboratory (ARL) at Pennsylvania State University. Temperature measurements were obtained from an infrared (IR) camera. Since accurate temperature determination requires reliable emissivity values, the emissivity of CuCrZr was measured using the IR camera validated against thermocouple reference temperatures up to approximately 650 °C. The measurements were conducted under a vacuum level of approximately 10 -5 torr to minimize emissivity variations due to surface oxidation. The emissivity of CuCrZr was determined to be 0.057 ± 0.009 using a constant fit to the measured data over the surface temperature range from 100–650 °C.

Accelerator Subsystems and Technologies↗
DOE OSTI2025

Methane emission hotspots in a boreal forest-fen mosaic potentially linked to deep taliks

Permafrost thaw is transforming boreal forests into mosaics of wetlands and drier uplands. Topographic controls on hydrological and ecological conditions impact methane (CH 4 ) fluxes, contributing to uncertainty in local and regional CH 4 budgets and underlying drivers. The objective of this study was to explore CH 4 fluxes and their drivers in a transitioning boreal forest-fen ecosystem (Goldstream Valley, Alaska, USA). This landscape is characterized by thawing discontinuous permafrost and heterogeneous mosaics of fens, collapse-scar channels, and small mounds of permafrost soils. From a survey in July 2021, observed chamber CH4 fluxes included fen areas with intermediate to very high emissions (29.8–635.3 mg CH 4 m −2 d −1 ), clustered locations with CH 4 uptake (−2.11 to −0.7 mg CH 4 m −2 d −1 ), and three anomalous emission hotspots (342.4–772.4 mg CH 4 m −2 d −1 ) that were located near samples with lower emissions. Some surface and near-surface variables partially explained the spatial variation in CH 4 flux. Log-transformed CH 4 flux had a positive linear relationship with soil moisture at 20 cm depth ( R 2 = 0.31, p -value < 1e-5) and negative linear relationships with microtopography ( R 2 = 0.13, p -value < 0.006) and slope ( R 2 = 0.28, p -value < 2e-5). Methane emissions generally occurred in flat, wet, graminoid-dominated fens, whereas CH 4 uptake occurred on permafrost mounds dominated by feather mosses and woody vegetation. However, the CH 4 hotspots occurred on drier, slightly sloped locations with low or undetectable near-surface methanogen abundance, suggesting that CH 4 was produced in deeper soils. When the hotspot samples were omitted, log-transformed CH 4 flux had a positive linear relationship with near-surface methanogen abundance ( R 2 = 0.29, p -value = 0.0023), and stronger linear relationships with soil moisture, slope, and soil macronutrient concentrations. Our findings suggest that some CH 4 emission hotspots could arise from CH 4 in deep taliks. The inference that methanogenesis occurs in deep taliks was strengthened by the identification of intrapermafrost taliks across the study area using low-frequency geophysical induction. This study assesses surface spatial heterogeneity in the context of subsurface permafrost conditions and highlights the complexity of CH 4 flux patterns in transitioning forest-wetland ecosystems. To better inform regional CH 4 budgets, further research is needed to understand the spatial distribution of terrestrial CH 4 hotspots and to resolve their surface, near-surface, and subsurface drivers.

boreal↗
DOE OSTI2026

CoURAGE KAZR b1 Processing: Corrections, Calibrations, and Processing Report

The U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) User Facility supports atmospheric and earth system research through a comprehensive network of fixed and mobile observatories. These facilities provide long-term and intensive campaign-based observations of clouds, aerosols, precipitation, radiation, and meteorological state variables. ARM observations are designed to improve the physical understanding and numerical representation of atmospheric processes in earth system models, with particular emphasis on cloud-radiation interactions and precipitation processes. The Coast-Urban-Rural Atmospheric Gradient Experiment (CoURAGE) deploys one of the ARM Mobile Facilities (AMF) to the Mid-Atlantic region surrounding Baltimore, Maryland, for the period 1 December 2024 through 30 November 2025. This deployment focuses on characterizing atmospheric structure, cloud properties, and precipitation processes across strong land-use and surface heterogeneity gradients associated with urban, rural, and coastal (Chesapeake Bay) environments. The CoURAGE deployment complements the Baltimore Social-Environmental Collaborative (BSEC), a DOE Urban Integrated Field Laboratory (UIFL), by providing high-quality atmospheric observations needed to connect urban surface processes, emissions, and meteorology to cloud and precipitation responses. In addition to the central urban site, ancillary observing sites were deployed to rural Maryland northwest of Baltimore and to an island site in Chesapeake Bay. These measurements further complement a long-term atmospheric observatory operated in Beltsville, Maryland, by Howard University in collaboration with the Maryland Department of the Environment. Together, these assets form a four-node regional atmospheric observatory network representing Baltimore and its three primary surrounding environments—urban, rural, and coastal/bay. This coordinated observational strategy enables investigation of spatial gradients in boundary-layer structure, cloud occurrence, precipitation evolution, and aerosol-cloud interactions across complex surface regimes. Within this network, vertically pointing cloud radars play a critical role by providing continuous, high-resolution measurements of cloud and precipitation vertical structure.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Flying focus with arbitrary directionality for spatiotemporal control of laser intensity

Flying focus techniques produce laser pulses whose focal points travel at arbitrary, controllable velocities. While this flexibility can enhance a broad range of laser-based applications, existing techniques constrain the motion of the focal point to the propagation direction of the pulse. Here, we introduce a flying focus configuration that decouples the motion of the focus from the propagation direction. Here, a chirped laser pulse focused and diffracted by a diffractive lens and grating creates a focal point that can move both along and transverse to the propagation direction. The focal length of the lens, grating period, and chirp can be tuned to control the direction and velocity of the focus. Simulations demonstrate this control for a holographic configuration suited to high-power pulses, in which two off-axis pump beams with different focal lengths encode the equivalent phase of a chromatic lens and grating in a gas or plasma. For low-power pulses, conventional solid-state or adaptive optics can be used instead. Multi-dimensional control over the focal trajectory enables new configurations for applications, including laser wakefield acceleration of ions, nonlinear Thomson scattering, and surface-plasmon emission of THz radiation.

Classical optics↗
DOE OSTI2025

Size-resolved Eddy-Covariance Particle Flux Measurement during the TRACER Campaign (Final Report)

The main goal of the TRacking Aerosol Convection interactions ExpeRiment (TRACER) campaign was to study aerosol–cloud interactions during deep convection over the Houston area. This project deployed a suite of instrumentation with the aim to (1) quantify turbulent vertical particle fluxes during at DOE-ARM sites, including TRACER, (2) assess hygroscopic growth factors and hygroscopicity parameters of the material driving modal aerosol growth during new particle formation and growth events, (3) derive turbulent aerosol mass fluxes using co-located Doppler LIDAR measurements, and (4) create quality-controlled PI data products to support future research utilizing data collected during the TRACER campaign. This report summarized the main findings from the deployments at two DOE-ARM sites. Briefly, we found that new particle formation may occur aloft, in a residual layer, near the top of the boundary layer. Small grown particles appear later due to downward mixing with daytime turbulence. The species that are responsible for aerosol modal growth had hygroscopicity parameters varying between 0.05 and 0.34. These values systematically depended on the wind sector, suggesting that the chemical composition of the precursors differed. This work demonstrated that lidar retrievals of the elastic backscatter and Doppler velocity can be used to obtain surface number emissions of particles with a diameter greater than 0.53 µm. During TRACER, emission particle number fluxes peaked near ∼ 100 cm−2 s−1. Multiple quality-controlled PI data products that will support future TRACER related science were generated and made publically available.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Advancing Mass Timber Buildings: Novel Methods Improve Thermal Assessment and Material Use

For nearly a century, thermal demand calculations for buildings have relied on simplified models developed to match the technical constraints of their era. The first standards, introduced in Germany and Austria in 1929, established climate zones and material conductivity coefficients that, with only incremental updates, still underpin many current assessments. Yet, methods such as Hot box testing, originally designed for lightweight insulation, continue to be applied for mass timber buildings, overlooking thermodynamic characteristics confer real-world advantages. Recent research at Oak Ridge National Laboratory incorporates updated methodologies, aligned with ASHRAE Standard 55 (ASHRAE, 2023) accounting for factors such as thermal inertia, inner surface temperatures, emissivity, solar gains, and dynamic outdoor conditions. These factors better reflect observed heating and cooling loads and highlight opportunities for efficient use of materials in mass timber construction. This work provides a framework for designing comfortable, resilient, and resource-efficient buildings while aligning with performance expectations in energy codes.

Pickett, Robert [International Mass Timber Allianc↗
DOE OSTI2024

First Time-Resolved Leader Spectra Associated With a Downward Terrestrial Gamma-Ray Flash Detected at the Telescope Array Surface Detector

Optical emissions associated with Terrestrial Gamma ray Flashes (TGFs) have recently become important subjects in space-based and ground-based observations as they can help us understand how TGFs are produced during thunderstorms. In this paper, we present the first time-resolved leader spectra of the optical component associated with a downward TGF. The TGF was observed by the Telescope Array Surface Detector (TASD) simultaneously with other lightning detectors, including a Lightning Mapping Array (LMA), an INTerFerometer (INTF), a Fast Antenna (FA), and a spectroscopic system. The spectroscopic system recorded leader spectra at 29,900 frames per second (33.44 μs time resolution), covering a spectral range from 400 to 900 nm, with 2.1 nm per pixel. The recordings of the leader spectra began 11.7 ms before the -18 kA return stroke and at a height of 2.37 km above the ground. These spectra reveal that optical emissions of singly ionized nitrogen and oxygen occur between 167 μs before and 267 μs after the TGF detection, while optical emissions of neutrals (H I, 656 nm; N I, 744 nm, and O I, 777 nm) occur right at the moment of the detection. The time-dependent spectra reveal differences in the optical emissions of lightning leaders with and without downward TGFs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Advancements and opportunities to improve bottom–up estimates of global wetland methane emissions

Wetlands are the single largest natural source of atmospheric methane (CH 4 ), contributing approximately 30% of total surface CH 4 emissions, and they have been identified as the largest source of uncertainty in the global CH 4 budget based on the most recent Global Carbon Project CH 4 report. High uncertainties in the bottom–up estimates of wetland CH 4 emissions pose significant challenges for accurately understanding their spatiotemporal variations, and for the scientific community to monitor wetland CH 4 emissions from space. In fact, there are large disagreements between bottom–up estimates versus top–down estimates inferred from inversion of atmospheric CH 4 concentrations. To address these critical gaps, we review recent development, validation, and applications of bottom–up estimates of global wetland CH 4 emissions, as well as how they are used in top–down inversions. These bottom–up estimates, using (1) empirical biogeochemical modeling (e.g. WetCHARTs: 125–208 TgCH 4 yr -1 ); (2) process-based biogeochemical modeling (e.g. WETCHIMP: 190 ± 39 TgCH 4 yr -1 ); and (3) data-driven machine learning approach (e.g. UpCH4: 146 ± 43 TgCH 4 yr -1 ). Bottom–up estimates are subject to significant uncertainties (~80 Tg CH 4 yr -1 ), and the ranges of different estimates do not overlap, further amplifying the overall uncertainty when combining multiple data products. These substantial uncertainties highlight gaps in our understanding of wetland CH 4 biogeochemistry and wetland inundation dynamics. Major tropical and arctic wetland complexes are regional hotspots of CH 4 emissions. However, the scarcity of satellite data over the tropics and northern high latitudes offer limited information for top–down inversions to improve bottom–up estimates. Recent advances in surface measurements of CH 4 fluxes (e.g. FLUXNET-CH 4 ) across a wide range of ecosystems including bogs, fens, marshes, and forest swamps provide an unprecedented opportunity to improve existing bottom–up estimates of wetland CH 4 estimates. We suggest that continuous long-term surface measurements at representative wetlands, high fidelity wetland mapping, combined with an appropriate modeling framework, will be needed to significantly improve global estimates of wetland CH 4 emissions. There is also a pressing unmet need for fine-resolution and high-precision satellite CH 4 observations directed at wetlands.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Detection of the Orbital Modulation of Fe Kα Fluorescence Emission in Centaurus X-3 Using the High-resolution Spectrometer Resolve on board XRISM

Abstract The Fe K α fluorescence line emission in X-ray spectra is a powerful diagnostic tool for various astrophysical objects to reveal the distribution of cold matter around photoionizing sources. The advent of the X-ray microcalorimeter on board the XRISM satellite will bring new constraints on the emission line. We present one of the first such results for the high-mass X-ray binary Centaurus X-3, which is composed of an O-type star and a neutron star (NS). We conducted a 155 ks observation covering an entire binary orbit. A weak Fe K α line was detected in all orbital phases at an equivalent width (EW) of 10–20 eV. We found for the first time that its radial velocity (RV) is sinusoidally modulated by the orbital phase. The RV amplitude is 248 ± 13 km s −1 , which is significantly smaller than the value (391 km s −1 ) expected if the emission is from the NS surface, but is consistent if the emission takes place at the O star surface. We discuss several possibilities of the line production site, including the NS surface, O star surface, O star wind, and accretion stream from the O star to the NS. We ran radiative transfer calculation for some of them assuming spherically symmetric density and velocity profiles and an isotropic distribution of X-ray emission from the NS. None of them explains the observed EW and velocity dispersion dependence on the orbital phase, suggesting that more elaborated modeling is needed. In other words, the present observational results have the capability to constrain deviations from these assumptions.

High energy astrophysics↗
DOE OSTI2026

Land-Surface Temperature Transitions at the Bankhead National Forest (LASTT-BNF) Field Campaign Report

Land surface types that are common in the Southeast United States (e.g., forests, agriculture, urban) can play key roles in the regulation of surface-atmosphere energy exchange and boundary-layer evolution in the region (Hinkle et al. 2024). Heterogeneity in these land-surface types and associated emissivities can drive strong transitions in land surface temperature (LST), which is an important component of the surface energy balance. Within the forested canopy surrounding the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) User Facility’s field deployment at the Bankhead National Forest (BNF) in Alabama main site (M1) (Kuang et al. 2026), the different components of the vegetation and ground surface can create strong gradients in surface temperature that can influence the canopy thermal environment and vegetative function (e.g., stress, transpiration), both of which can have important, yet poorly characterized, controls on lower atmospheric processes (e.g., thermal turbulence, secondary circulations).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Surface orientation ambiguity for single molecules at dielectric interfaces

Fluorescent molecules emit light in a dipole radiation pattern that can be used to infer their orientation through defocused fluorescence microscopy. Proper measurement of the orientation requires mathematical modeling of the radiation pattern expected for a dipole in the geometry of interest and subsequent comparison against experimental data. We point out an ambiguity in common calculations of these patterns that appears to compromise orientation measurements for molecules that are especially near dielectric surfaces. This results in a rotation of the measured emission dipole toward the surface for near-interface molecules, which can be mistaken for a preferentially horizontal orientation among the emitters. The proper treatment for on-surface emitters requires consideration of finite-sized current elements between two dielectric media, and we show that the theoretical ambiguity can be lifted via finite-element modeling. A prescription is provided for correcting measured orientations at arbitrary interfaces.

Dey, E. [University of Texas, Arlington, TX (Unite↗
DOE OSTI2026

Variation in surface properties as error sources in dynamic temperature measurements

Most temperature measurement methods rely upon the assumption of a single uniform source as part of the analysis in inferring an observed temperature T from the surface of a material. This is true for the radiometric and spectroscopic methods we rely upon in shock physics. However, there are obvious cases where this is a poor assumption that can cause large errors in analysis, such as the measurement of emission from a surface composed of more than one material, such as a rusted surface of Fe and Fe 2 O 3 , or a multi-material surface that could be produced through alloying methods (e.g., mokume gane) or 3D printing. Here we perform an initial examination of the effects of varied surface properties upon the analysis using idealized test data to constrain when we may have better confidence in the resulting calculations. We also examine the structures of the fits to test whether, in principle, comparing the fit with ideal gray bodies would reveal such a structure and enable the researcher to identify when a two-temperature fitting model should be used instead of a single- T model or a wavelength-dependent emissivity model.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A New Coupled Biogeochemical Modeling Approach Provides Accurate Predictions of Methane and Carbon Dioxide Fluxes Across Diverse Tidal Wetlands

Abstract Tidal wetlands provide valuable ecosystem services, including storing large amounts of carbon. However, the net exchanges of carbon dioxide (CO 2 ) and methane (CH 4 ) in tidal wetlands are highly uncertain. While several biogeochemical models can operate in tidal wetlands, they have yet to be parameterized and validated against high‐frequency, ecosystem‐scale CO 2 and CH 4 flux measurements across diverse sites. We paired the Cohort Marsh Equilibrium Model (CMEM) with a version of the PEPRMT model called PEPRMT‐Tidal, which considers the effects of water table height, sulfate, and nitrate availability on CO 2 and CH 4 emissions. Using a model‐data fusion approach, we parameterized the model with three sites and validated it with two independent sites, with representation from the three marine coasts of North America. Gross primary productivity (GPP) and ecosystem respiration (R eco ) modules explained, on average, 73% of the variation in CO 2 exchange with low model error (normalized root mean square error (nRMSE) <1). The CH 4 module also explained the majority of variance in CH 4 emissions in validation sites ( R 2 = 0.54; nRMSE = 1.15). The PEPRMT‐Tidal‐CMEM model coupling is a key advance toward constraining estimates of greenhouse gas emissions across diverse North American tidal wetlands. Further analyses of model error and case studies during changing salinity conditions guide future modeling efforts regarding four main processes: (a) the influence of salinity and nitrate on GPP, (b) the influence of laterally transported dissolved inorganic C on R eco , (c) heterogeneous sulfate availability and methylotrophic methanogenesis impacts on surface CH 4 emissions, and (d) CH 4 responses to non‐periodic changes in salinity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Temporal Variability in Reservoir Surface Area Is an Important Source of Uncertainty in GHG Emission Estimates

Ebullitive methane (CH 4 ) emissions in lentic ecosystems tend to concentrate at river-lake interfaces and within shallow littoral zones. However, inconsistent definitions of the littoral zone and static representations of the lake or reservoir surface area contribute to major uncertainties in greenhouse gas (GHG) emissions estimates, particularly in reservoirs with large water-level fluctuations. This study examines temporal variation in littoral and total surface areas of US reservoirs and demonstrates how different methods and data sources lead to discrepencies in reservoir GHG emissions at large scales and over time. We also explore variability in remotely sensed water occurrence according to maximum surface area, reservoir purposes, and hydrologic regions. Notably, the largest relative variability in surface area is exhibited by small reservoirs with a maximum surface area <1 km 2 and non-hydroelectric reservoirs. Additionally, we use a case study of measured CH 4 emissions from the southeastern United States (Douglas Reservoir) to illustrate the effects of varying surface area on reservoir-wide GHG estimates. Upscaled CH 4 emissions in Douglas Reservoir differed by nearly two-fold depending on the source of total surface area data and whether estimates accounted for seasonal fluctuations in surface area. During seasonal drawdown in Douglas Reservoir, relative littoral area varies non-linearly; periods of lower pool elevation (and thus larger relative littoral area) likely contribute disproportionately high CH 4 emission rates compared to the commonly sampled summer season when water levels are at full-pool elevation. Improved GHG monitoring and upscaling techniques require accounting for temporal variability in reservoir surface extent and littoral area.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Carbene Functionalization of Monolayer Tungsten Disulfide for Enhanced Quantum Emission

Semiconducting two-dimensional (2D) transition metal dichalcogenides (TMDs) are promising materials for an array of applications, ranging from conventional field-effect transistors, photodetectors, and light-emitting diodes to their more recent use in quantum photonic technologies. Chemical functionalization of 2D TMDs with organic ligands and adlayers provides an additional means for customizing their electronic and optical properties. While many pathways have been reported for the chemical functionalization of 2D TMDs, their frequent reliance on solution-based methods results in limited control over adlayer thickness and coverage, thus hindering utility in high-performance applications. Here, in this study, we describe the vapor-phase functionalization of a 2D TMD with carbene ligands, specifically tungsten disulfide (WS 2 ) with N-heterocyclic carbenes (NHCs), resulting in molecularly smooth, thin, and uniform adlayers. Reacting NHCs with monolayer WS 2 reduces the broad photoluminescence background observed at cryogenic temperatures by 58%, which facilitates the detection of single-photon emitters from strained monolayer WS 2 , as indicated by second order correlation values ( g (2) ) as low as 0.17 ± 0.07. Chemical characterization coupled with density functional theory calculations suggests that the NHC adlayer has a dual defect-passivation and doping effect on monolayer WS 2 that results in enhanced single-photon emission. Overall, this study establishes vapor-phase carbene functionalization as a homogeneous surface modification scheme for tailoring the quantum emission properties of semiconducting 2D TMDs.

N-heterocyclic carbenes↗
DOE OSTI2024

Thermal-Strain-Enabled Enhanced Emission from UV Laser-Induced Defect Levels near the Surface of Multilayer MoS 2

Monolayer two-dimensional (2D) materials have been intensively studied while research on multilayers is still in its infancy. Here, we induce defects inside bulk MoS 2 through thermal annealing and near the surface of multilayer MoS 2 using 375 nm laser irradiation, and investigate their photoluminescence (PL) and fluorescence lifetime imaging (FLIM). Enhanced emission is limited within a certain MoS 2 thickness. The observed enhanced emission is evidenced by a threshold behavior in super-linear PL intensity increase, strong polarization effects, and increased lifetime of defect peak. The laser power threshold for enhanced emission is much smaller in defects near the surface than that inside the bulk of multilayer MoS 2 . The mechanical strain from a wrinkle of the sample further lowers the laser power threshold for enhanced emission. By exciting with a 639 nm laser that is close to the fundamental gap between the conduction band minimum and the valence band maximum, the lifetime of defect enhanced emission increased by 5 times. Furthermore, one of the competing indirect bandgap emissions disappears, and the defect emission peak dominates the PL spectrum in the wrinkle area with a strain. Furthermore, the discovered principle can be applied to future studies on the integration of enhanced emission and single photon emission involving selectively depopulating the conduction band of the host crystal to defect levels for quantum emitters.

2D materials↗