Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural settings”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Superlattice Long-Wavelength Infrared Sensors

Superlattice of LaN and Si detects at wavelengths up to 12 micrometers. If LaN grown epitaxially on silicon, sensitivity of silicon-based photodetectors extended farther into infrared wavelength region with high quantum detection efficiency by use of LaN/Si superlattices. In principle, by appropriate choice of thicknesses of layers, effective band-gap energy of superlattice structure set to any desired value between band gaps of two materials.

Fathauer, Robert W.↗
NASA NTRS1991

Determination of a natural basis function set on thick, structured slabs using Prony's method

The calculation of currents on a thick, structured slab such as a thick slab of honeycomb is discussed. Unfortunately, for certain applications, the slab can be on the order of several wavelengths, so that the straightforward application of the method of moments using subdomain basis functions is too expensive. The authors discuss how to apply Prony's method to the currents calculated for a thin, structured slab to obtain a natural set of basis functions to represent the currents in the interior of a thick slab. Prony's method represents the currents as a series of complex exponential functions. The thick slab problem is then solved by the method of moments using subdomain basis functions near the slab interfaces and one or two of the complex exponentials as basis functions within the slab.

Jorgenson, Roy E.↗
NASA NTRS2004

Validation and Analysis of SRTM and VCL Data Over Tropical Volcanoes

The focus of our investigation was on the application of digital topographic data in conducting first-order volcanological and structural studies of tropical volcanoes, focusing on the Java, the Philippines and the Galapagos Islands. Kilauea volcano, Hawaii, served as our test site for SRTM data validation. Volcanoes in humid tropical environments are frequently cloud covered, typically densely vegetated and erode rapidly, so that it was expected that new insights into the styles of eruption of these volcanoes could be obtained from analysis of topographic data. For instance, in certain parts of the world, such as Indonesia, even the regional structural context of volcanic centers is poorly known, and the distribution of volcanic products (e.g., lava flows, pyroclastic flows, and lahars) are not well mapped. SRTM and Vegetation Canopy Lidar (VCL) data were expected to provide new information on these volcanoes. Due to the cancellation of the VCL mission, we did not conduct any lidar studies during the duration of this project. Digital elevation models (DEMs) such as those collected by SRTM provide quantitative information about the time-integrated typical activity on a volcano and allow an assessment of the spatial and temporal contributions of various constructional and destructional processes to each volcano's present morphology. For basaltic volcanoes, P_c?w!m-d and Garbed (2000) have shown that gradual slopes (less than 5 deg.) occur where lava and tephra pond within calderas or in the saddles between adjacent volcanoes, as well as where lava deltas coalesce to form coastal plains. Vent concentration zones (axes of rift zones) have slopes ranging from 10 deg. to 12 deg. Differential vertical growth rates between vent concentration zones and adjacent mostly-lava flanks produce steep constructional slopes up to 40". The steepest slopes (locally approaching 90 deg.) are produced by fluvial erosion, caldera collapse, faulting, and catastrophic avalanches, all of which are usually identifiable. Due to the delay in the release of the SRTM data following the February 2000 flight, a significant part of our effort was devoted to the analog studies of the SRTM topographic data using topographic data from airborne interferometric radars. As part of the original SRTM Science Team, we proposed four study sites (Kilauea, Hawaii; Mt. Pinatubo, Philippines; Cerro Am1 and Femandina volcanoes, Galapagos Islands; and Tengger caldera, Java) where we could conduct detailed geologic studies to evaluate the uses of SRTM data for the analysis of lava flows, lahars, erosion of ash deposits, and an evaluation of the structural setting of the volcanoes. Only near the end of this project was one of these SRTM Science Team products (Luzon Island, the Philippines) released to the community, and we only had limited time to work on these data.

Mouginis-Mark, Peter J.↗
NASA NTRS2005

Synthesis and Near IR Photoluminescence of Os(II) Bis(2,2'-bipyridine) (3,8-Diarylethynyl-1,10-phemanthroline) Complexes: Anomalous Behavior of the 3,8-Dinitrophenylethynyl-substituted Homologue

A large bathochromic shift (50 nm) and emission in the near infrared is observed by attaching arylethynyl groups at the 3,8-positions of the 1,10-phenanthroline ligand (phen) of [Os(bipy)2(phen)]2+ (where bipy = 2,2'-bipyridine). Thus [Os(bipy)2(3,8-di-4-methoxyphenylethynyl-1,10-phenathroline)]2+ emits at 795 nm, while [Os(bipy)2(3,8-diphenylethynyl-1,10-phenanthroline)]2+ emits at 815 nm. According to this trend it would have been expected that [Os(bipy)2(3,8-di-4-nitrophenylethynyl-1,10-phenathroline)]2+ emits farther in the near infrared. Nevertheless, this complex is not photoluminescent because of intramolecular electron transfer quenching of the MLCT excited state by the nitroaromatic group. These results set structural and redox potential standards in the design of near infrared emitters based on [Os(bipy)2(phen)]2+ type complexes.

Yang, Jinhua↗
NASA NTRS2024

Mount Etna as A Terrestrial Laboratory to Investigate Recent Volcanic Activity on Venus By Future Missions: A Comparison With Idunn Mons, Venus

The recently selected missions to Venus have opened a new era for the exploration of this planet. These missions will provide information about the chemistry of the atmosphere, the geomorphology, local-to-regional surface composition, and the rheology of the interior. One key scientific question to be addressed by these future missions is whether Venus remains volcanically active, and if so, how its volcanism is currently evolving. Hence, it is fundamental to analyze appropriate terrestrial analog sites for the study of possibly active volcanism on Venus. To this regard, we propose Mount Etna - one of the most active and monitored volcanoes on Earth - as a suitable terrestrial laboratory for remote and in-situ investigations to be performed by future missions to Venus. Being characterized by both effusive and explosive volcanic products, Mount Etna offers the opportunity to analyze multiple eruptive styles, both monitoring active volcanism and identifying the possible occurrence of pyroclastic activity on Venus. We directly compare Mount Etna with Idunn Mons, one of the most promising potentially active volcanoes of Venus. Despite the two structures show a different topography, they also show some interesting points of comparison, and in particular: a) comparable morpho-structural setting, since both volcanoes interact with a rift zone, and b) morphologically similar volcanic fields around both Mount Etna and Idunn Mons. Given its ease of access, we also propose Mount Etna as an analog site for laboratory spectroscopic studies to identify the signatures of unaltered volcanic deposits on Venus.

P D DIncecco↗
NASA NTRS1991

Assessing damping uncertainty in space structures with fuzzy sets

NASA has been interested in the development of methods for evaluating the predictive accuracy of structural dynamic models. This interest stems from the use of mathematical models in evaluating the structural integrity of all spacecraft prior to flight. Space structures are often too large and too weak to be tested fully assembled in a ground test lab. The predictive accuracy of a model depends on the nature and extent of its experimental verification. The further the test conditions depart from in-service conditions, the less accurate the model will be. Structural damping is known to be one source of uncertainty in models. The uncertainty in damping is explored in order to evaluate the accuracy of dynamic models. A simple mass-spring-dashpot system is used to illustrate a comparison among three methods for propagating uncertainty in structural dynamics models: the First Order Method, the Numerical Simulation Method, and the Fuzzy Set Method. The Fuzzy Set Method is shown to bound the range of possible responses and thus to provide a valuable limiting check on the First Order Method near resonant conditions. Fuzzy Methods are a relative inexpensive alternative to numerical simulation.

Ross, Timothy J.↗
NASA NTRS2010

TPSAS-NF1676L-10980-DND

We plan to perform the following sets of computations on unadapted (fixed) grids: 1) Structured RANS set 1 (Code: CFL3D, Grid: Str-OnetoOne-A-v1 (supplied by HiLiftPW-1 committee), Turbulence model: Spalart-Allmaras), 2) Structured RANS set 2 (Code: CFL3D, Grid: Str-OnetoOne-A-v1 (supplied by HiLiftPW-1 committee), Turbulence model: Menter SST), 3) Structured RANS set 3 (time permitting) (Code: CFL3D, Grid: Str-OnetoOne-B-v1 (supplied by HiLiftPW-1 committee), Turbulence model: Menter SST), 4) Unstructured RANS set 1 (Code: FUN3D, Grid: Unst-Mixed-FromTet-Nodecentered-A-v1 (supplied by HiLiftPW-1 committee), Turbulence model: Spalart-Allmaras), and 5) Unstructured RANS set 2 (time permitting) (Code: FUN3D, Grid: Unst-Hex-FromOnetoOne-A-v1 (supplied by HiLiftPW-1 committee), Turbulence model: Spalart-Allmaras),. Optional case 3 is not being computed. CFL3D is a structured upwind-biased cell-centered RANS code,1 and FUN3D is an unstructured upwind-biased node-centered RANS code

Elizabeth M Lee-Rausch↗
NASA NTRS2010

TPSAS-NF1676L-10454-DND

We plan to perform the following sets of computations on unadapted (fixed) grids: 1) Structured RANS set 1 (Code: CFL3D, Grid: Str-OnetoOne-A-v1 (supplied by HiLiftPW-1 committee), Turbulence model: Spalart-Allmaras), 2) Structured RANS set 2 (Code: CFL3D, Grid: Str-OnetoOne-A-v1 (supplied by HiLiftPW-1 committee), Turbulence model: Menter SST), 3) Structured RANS set 3 (time permitting) (Code: CFL3D, Grid: Str-OnetoOne-B-v1 (supplied by HiLiftPW-1 committee), Turbulence model: Menter SST), 4) Unstructured RANS set 1 (Code: FUN3D, Grid: Unst-Mixed-FromTet-Nodecentered-A-v1 (supplied by HiLiftPW-1 committee), Turbulence model: Spalart-Allmaras), and 5) Unstructured RANS set 2 (time permitting) (Code: FUN3D, Grid: Unst-Hex-FromOnetoOne-A-v1 (supplied by HiLiftPW-1 committee), Turbulence model: Spalart-Allmaras),. Optional case 3 is not being computed. CFL3D is a structured upwind-biased cell-centered RANS code,1 and FUN3D is an unstructured upwind-biased node-centered RANS code

C L Rumsey↗
NASA NTRS1977

Approximate method for calculating free vibrations of a large-wind-turbine tower structure

A set of ordinary differential equations were derived for a simplified structural dynamic lumped-mass model of a typical large-wind-turbine tower structure. Dunkerley's equation was used to arrive at a solution for the fundamental natural frequencies of the tower in bending and torsion. The ERDA-NASA 100-kW wind turbine tower structure was modeled, and the fundamental frequencies were determined by the simplified method described. The approximate fundamental natural frequencies for the tower agree within 18 percent with test data and predictions analyzed.

Das, S. C.↗
NASA NTRS1993

Report on the test set-up for the structural testing of the Airmass Sunburst Ultralight Aircraft

This report reviews the test set-up and procedure for the structural testing of the Airmass Sunburst Ultralight Aircraft. In general aviation today, there is a growing need for more stringent design criteria for ultralight aircraft. Unlike most general aviation aircraft, the ultralight lacks sufficient design criteria and more importantly it lacks sufficient certification enforcement. The Airmass Sunburst ultralight that is currently being tested is responsible for over a dozen deaths. It is believed that had there been a more stringent criteria and certification process, this might have been prevented. Our attempt is to show that the failing loads of the aircraft in question are so far below that of the current design criteria, that the laws need to be changed.

Zimmerman, William↗
NASA NTRS1993

Structural mapping of Maxwell Montes

Four sets of structures were mapped in the western and southern portions of Maxwell Montes. An early north-trending set of penetrative lineaments is cut by dominant, spaced ridges and paired valleys that trend northwest. To the south the ridges and valleys splay and graben form in the valleys. The spaced ridges and graben are cut by northeast-trending graben. The northwest-trending graben formed synchronously with or slightly later than the spaced ridges. Formation of the northeast-trending graben may have overlapped with that of the northwest-trending graben, but occurred in a spatially distinct area (regions of 2 deg slope). Graben formation, with northwest-southeast extension, may be related to gravity-sliding. Individually and collectively these structures are too small to support the immense topography of Maxwell, and are interpreted as parasitic features above a larger mass that supports the mountain belt.

Keep, Myra↗
NASA NTRS1975

Bubble-domain circuit wafer evaluation coil set

Coil structures have been designed to permit nondestructive testing of bubble wafers. Wafers can be electrically or optically inspected and operated from quasi-static frequency to maximum device operating frequency.

Chen, T. T.↗
NASA NTRS1984

STAEBL: Structural tailoring of engine blades, phase 2

The Structural Tailoring of Engine Blades (STAEBL) program was initiated at NASA Lewis Research Center in 1980 to introduce optimal structural tailoring into the design process for aircraft gas turbine engine blades. The standard procedure for blade design is highly iterative with the engineer directly providing most of the decisions that control the design process. The goal of the STAEBL program has been to develop an automated approach to generate structurally optimal blade designs. The program has evolved as a three-phase effort with the developmental work being performed contractually by Pratt & Whitney Aircraft. Phase 1 was intended as a proof of concept in which two fan blades were structurally tailored to meet a full set of structural design constraints while minimizing DOC+I (direct operating cost plus interest) for a representative aircraft. This phase was successfully completed and was reported in reference 1 and 2. Phase 2 has recently been completed and is the basis for this discussion. During this phase, three tasks were accomplished: (1) a nonproprietary structural tailoring computer code was developed; (2) a dedicated approximate finite-element analysis was developed; and (3) an approximate large-deflection analysis was developed to assess local foreign object damage. Phase 3 is just beginning and is designed to incorporated aerodynamic analyses directly into the structural tailoring system in order to relax current geometric constraints.

Hirschbein, M. S.↗
NASA NTRS1988

Solution accuracies of finite element reentry heat transfer and thermal stress analyses of Space Shuttle Orbiter

Accuracies of solutions (structural temperatures and thermal stresses) obtained from different thermal and structural FEMs set up for the Space Shuttle Orbiter (SSO) are compared and discussed. For studying the effect of element size on the solution accuracies of heat-transfer and thermal-stress analyses of the SSO, five SPAR thermal models and five NASTRAN structural models were set up for wing midspan bay 3. The structural temperature distribution over the wing skin (lower and upper) surface of one bay was dome shaped and induced more severe thermal stresses in the chordwise direction than in the spanwise direction. The induced thermal stresses were extremely sensitive to slight variation in structural temperature distributions. Both internal convention and internal radiation were found to have equal effects on the SSO.

Ko, William L.↗
NASA NTRS1999

Mapping Vegetation Structure in Kakadu National Park: An AIRSAR and GIS Application in Conservation

Airborne Synthetic Aperture Radar (AIRSAR) data were used to map vegetation structure in Kakadu National Park Australia as part of the PACRIM project. SAR data were co-registered with Landsat TM, aerial photos, and map data in a geographic information system for a small test area consisting of mangrove, floodplain grasslands, lowland tropical evergreen forest and upland mixed deciduous and evergreen tropical forest near the South Alligator River. Landsat (Thematic Mapper) TM very clearly showed the floristic composition and burn scars from the previous years fires and the AIRSAR data provided a profile of vegetation structure. Extensive field data on vegetation species composition and structure were collected across a series of transects in cooperation with a survey of avifauna in an effort to link the habitat edge structure with bird species responses. A test site was found that contained two types of habitat edges: 1) A structure specific edge - characterized by the appearance of a very strong structural change in the forest canopy occurring in the absence of a substantial turnover in floristics. 2) Floristic edge - a sharp transition in vegetation genetic composition with a mixed set of structural changes. Specific polarization combinations were selected that were highly correlated to a set of desired structural parameters found in the field data. Classification routines were employed to group radar pixels into 3 structural classes based on: the Surface Area to Volume ratio (SA/V) of the stems, the SA/V of the branches, and the leaf area index of the canopy. Separate canopy structure maps were then entered into the GIS and bird responses were observed relative to the classes and their boundaries. Follow-on work will consist of extending this approach to neighboring areas, generating structure maps, predicting bird responses across the edges, and make accuracy assessments.

Imhoff, Marc L.↗
NASA NTRS1974

STRCMACS: An extensive set of Macros for structured programming in OS/360 assembly language

Two techniques are discussed that have been most often referred to as structured programming. One is that of programming with high level control structures (such as the if and while) replacing the branch instruction (goto-less programming); the other is the process of developing a program by progressively refining descriptions of components in terms of more primitive components (called stepwise refinement or top-down programming). In addition to discussing what these techniques are, it is shown why their use is advised and how both can be implemented in OS assembly language by the use of a special macro instruction package.

Barth, C. W.↗
NASA NTRS2003

Developing a MATLAB(registered)-Based Tool for Visualization and Transformation

An important step in the structural design and development of spacecraft is the experimental identification of a structure s modal characteristics, such as its natural frequencies and modes of vibration. These characteristics are vital to developing a representative model of any given structure or analyzing the range of input frequencies that can be handled by a particular structure. When setting up such a representative model of a structure, careful measurements using precision equipment (such as accelerometers and instrumented hammers) must be made on many individual points of the structure in question. The coordinate location of each data point is used to construct a wireframe geometric model of the structure. Response measurements obtained from the accelerometers is used to generate the modal shapes of the particular structure. Graphically, this is displayed as a combination of the ways a structure will ideally respond to a specified force input. Two types of models of the tested structure are often used in modal analysis: an analytic model showing expected behavior of the structure, and an experimental model showing measured results due to observed phenomena. To evaluate the results from the experimental model, a comparison of analytic and experimental results must be made between the two models. However, comparisons between these two models become difficult when the two coordinate orientations differ in a manner such that results are displayed in an unclear fashion. Such a problem proposes the need for a tool that not only communicates a graphical image of a structure s wireframe geometry based on various measurement locations (called nodes), but also allows for a type of transformation of the image s coordinate geometry so that a model s coordinate orientation is made to match the orientation of another model. Such a tool should also be designed so that it is able to construct coordinate geometry based on many different listings of node locations and is able to transform the wireframe coordinate orientation to match almost any possible orientation (i.e. it should not be a problem specific application) if it is to be of much value in modal analysis. Also, since universal files are used to store modal parameters and wireframe geometry, the tool must be able to read and extract information from universal files and use these files to exchange model data.The purpose of this project is to develop such a tool as a computer graphical user interface (GUI) capable of performing the following tasks: 1) Browsing for a particular universal file within the computer directory and displaying the name of this file to the screen; 2) Plotting each of the nodes within the universal file in a useful, descriptive, and easily understood figure; 3) Reading the node numbers from the selected file and listing these node numbers to the user for selection in an easily accessible format; 4) Allowing for user selection of a new model orientation defined by three selected nodes; and 5) Allowing the user to specify a directory to which the transformed model s node locations will be saved, and saving the transformed node locations to the specified file.

Anderton, Blake J.↗