Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural rings”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Inelastic Neutron Scattering from Thin Film Biaxially Oriented Polyethylene Terephthalate

Recent interest in emerging processes for polymer manufacturing and bio-based chemistries for direct chemical recycling/upcycling has motivated new research focused on a deeper understanding of atomic-scale polymer properties and how they influence macroscopic phenomena. Uncovering the fundamental properties of polymers that give rise to macroscopic behavior could enable new pathways for improved recyclability or utilization of alternative “greener” polymer analogues. In this study, the neutron vibrational spectrum was measured for a film of biaxially oriented polyethylene terephthalate (BoPET) using inelastic neutron scattering (INS), to investigate the relationship between the structure and dynamics of a widely used polymer. Compared to conventional spectroscopic techniques, the use of INS is advantageous for polymeric materials due to the absence of selection rules (i.e., all transitions are allowed), broad-band energy range, and considerable sensitivity to hydrogen modes. In order to distinguish the vibrational modes caused by trans and gauche rotational isomerism, the normal modes of vibration were calculated from a density functional theory-optimized structure of crystalline PET (cPET), representative of the all-trans state, and compared with INS from “highly crystalline” PET powder. Although in- and out-of-plane wagging of hydrogens on the ring structure exhibit significant contribution to both BoPET and cPET spectra, the wagging, rocking, and twisting modes of hydrogen on the ethylene glycol group are, in most cases, conformation-specific. These results were further rationalized by investigating the role of hyperconjugation in stabilizing both conformations using the natural bond order method. Here, through comparison of experimental and calculated INS results, this work provides the fundamental basis for discovering the role of structure and dynamics in shaping the macroscopic properties of PET and polymer analogues.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Structural drivers controlling sulfur solubility in alkali aluminoborosilicate glasses

Abstract If the direct feed approach to vitrify the Hanford's tank waste is implemented, the low activity waste (LAW) will comprise higher concentrations of alkali/alkaline‐earth sulfates than expected under the previously proposed vitrification scheme. To ensure a minimal impact of higher sulfate concentrations on the downstream operations and overall cost of vitrification, advanced glass formulations with enhanced sulfate loadings (solubility) are needed. While, the current sulfate solubility predictive models have been successful in designing LAW glasses with sulfate loadings <2 wt.%, it will be difficult for them to design glass compositions with enhanced loadings due to our limited understanding of the fundamental science governing these processes. In this pursuit, this article unearths the underlying compositional and structural drivers controlling the sulfate solubility in model LAW glasses. It has been shown that the preferentially removes non‐framework cations from the modifier sites in the silicate network, thus, leading to the polymerization in the glass network via the formation of ring‐structured borosilicate units. Furthermore, though the sulfate solubility slightly decreases with increasing Li + /Na + in the glasses, the prefers to be charge compensated by Na + , as it is easier for to break Na–O bonds instead of Li–O bonds.

Xu, Xinyi↗
DOE OSTI2020

Conformational Panorama and Chirality Controlled Structure–Energy Relationship in a Chiral Carboxylic Acid Dimer

Chirality recognition in dimers of tetrahydro-2-furoic acid (THFA) was studied in a conformer-specific manner using rotational spectroscopy and theoretical approaches. THFA shows a strong preference for the trans- over the cis-COOH configuration. Two drastically different scenarios are possible for the detectable (THFA) 2 : a kinetically preferred dimer bound by feeble interactions between two trans-THFAs or a thermodynamically favored dimer with a double hydrogen-bonded ring structure between two cis subunits. To identify the conformers responsible for the extremely dense rotational spectra observed, it was essential not only to locate several hundred homo/heterochiral (THFA) 2 minima in ab initio calculations but also to evaluate the energetic connectivities among the minima. The study further reveals an interesting chirality dependent structure-energy ordering relationship. A method for enantiomeric excess (ee) determination of THFA is presented using a recently proposed chiral self-tag approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Identification of the molecular-weight growth reaction network in counterflow flames of the C 3 H 4 isomers allene and propyne

The reaction networks responsible for aromatics formation in counterflow flames of the C 3 H 4 isomers allene and propyne are identified through a combined experimental and modeling study. Mole fraction profiles of near-atmospheric pressure (933 mbar) diffusion flames fueled by the C 3 H 4 isomers are analyzed by means of a newly assembled, chemically detailed kinetic mechanism. The experiment consists of a counterflow burner system that is coupled to a high-resolution time-of-flight molecular-beam mass spectrometer with single-photon ionization via synchrotron-generated vacuum-ultraviolet photons. Flame-sampled, mass-specific photoionization efficiency curves are used to identify the presence of aliphatically substituted aromatic species in addition to the commonly considered pericondensed ring structures. The new mechanism describes the formation and growth of aromatics through repetitive sequences of radical–radical and radical–molecule reactions that include C 1 6 intermediates. Higher concentrations of aromatic species are observed in the allene flame and the new mechanism captures the observed experimental trends very accurately. The results indicate the importance of the aliphatically substituted aromatics and of ring-enlargement reactions for the growth reactions. According to the model simulations, radical+radical recombination and PAH-radical+molecule reactions play an important role in PAH growth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A Joint Modeling/Experimental Approach to Characterize Ionization and Fragmentation of SOA Molecules with CIMS

The Molecular Dynamics technique Collective variable hyperdynamics (CVHD) interfaced with density functional tight-binding at the GFN1-xTB and GFN2-xTB levels of electronic structure theory has been applied to the H + GAG positively charged peptide system to explore the fragmentation of this simple tripeptide under relatively low temperature/energy conditions. Unlike conventional chemical dynamics simulations which can only be performed up to hundreds of picoseconds when coupled with semi-empirical Hamiltonians, CVHD is able to capture the long-time dynamics of multiple proton hopping, the formation of reversible ring structures, and ester rearrangement of the H + GAG system prior to fragmentation. The CVHD method applied to H + GAG is also able to uncover alternative fragmentation pathways not considered previously such as glycine fragmentation on the N-terminal side of the charged peptide and new cyclic cationic species. These findings in the H + GAG case have implications for other peptide systems.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Star formation in outer rings of S0 galaxies: IV. NGC 254: A double-ringed S0 with gas counter-rotation

Although S0 galaxies are usually considered “red and dead”, they often demonstrate star formation organized into ring structures. We aim to clarify the nature of this phenomenon and how it differs from star formation in spiral galaxies. We investigated the nearby, moderate-luminosity S0 galaxy NGC 254 using long-slit spectroscopy taken with the South African Large Telescope and publicly available imaging data. Applying a full spectral fitting, we analyzed gaseous and stellar kinematics as well as ionized gas excitation and metallicity and stellar population properties resolved by radius. An advanced approach of simultaneously fitting spectra and photometric data allowed us to quantify the fraction of hidden counter-rotating stars in this galaxy. We find that the ionized gas is counter-rotating with respect to the stars throughout NGC 254 disk, indicating an external origin of the gas. We argue the gas-rich galaxy merger from retrograde orbit as a main source of counter-rotating material. The star formation fed by this counter-rotating gas occurs within two rings: an outer ring at R = 55' - 70" and an inner ring at R = 18". The star formation rate is weak, 0.02 solar mass per year in total, and the gas metallicity is slightly subsolar. We estimated that the accretion of the gas occurred about 1 Gyr ago, and about 1% of all stars have formed in situ from counter-rotating gas.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Wide Dust Gaps in Protoplanetary Disks Induced by Eccentric Planets: A Mass-eccentricity Degeneracy

The tidal perturbation of embedded protoplanets on their natal disks has been widely attributed to be the cause of gap-ring structures in submillimeter images of protoplanetary disks around T Tauri stars. Numerical simulations of this process have been used to propose scaling of characteristic dust-gap width/gap-ring distance with respect to planet mass. Applying such scaling to analyze observed gap samples yields a continuous mass distribution for a rich population of hypothetical planets in the range of several Earth to Jupiter masses. In contrast, the conventional core-accretion scenario of planet formation predicts a bimodal mass function due to (1) the onset of runaway gas accretion above ~20 Earth masses and (2) suppression of accretion induced by gap opening. Here, we examine the dust disk response to the tidal perturbation of eccentric planets as a possible resolution of this paradox. Based on simulated gas and dust distributions, we show the gap-ring separation of Neptune-mass planets with small eccentricities might become comparable to that induced by Saturn-mass planets on circular orbits. Furthermore, this degeneracy may obliterate the discrepancy between the theoretical bimodal mass distribution and the observed continuous gap width distribution. Despite damping due to planet–disk interaction, modest eccentricity may be sustained either in the outer regions of relatively thick disks or through resonant excitation among multiple super Earths. Moreover, the ring-like dust distribution induced by planets with small eccentricities is axisymmetric even in low viscosity environments, consistent with the paucity of vortices in Atacama Large Millimeter/submillimeter Array images.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Entrainment, Detrainment, and Dilution of Dry and Moist Atmospheric Thermals

Here this study examines the entrainment, detrainment, and dilution of dry and moist (cloud) atmospheric thermals in large-eddy simulations. In a neutrally stable environment (with respect to dry dynamics), moist thermals have an increase in radius R with thermal height z t (α ≡ dR/dz t ) about 4 times smaller compared to dry thermals when density stratification is considered and ~2.4 times smaller without density stratification (i.e., applying the Boussinesq approximation). An analytic expression relating α to several dimensionless parameters is derived from the thermal impulse–circulation relation to clarify the factors impacting α. This expression shows that the difference in buoyancy structure between moist and dry thermals, with buoyancy concentrated in the central cores of moist thermals owing to latent heating, explains their smaller spreading rates. Individual contributions of entrainment and detrainment are analyzed using a direct parcel-based approach in the simulations. Moist thermals have similar fractional detrainment but much smaller fractional entrainment rates compared to dry thermals, consistent with the differences in α. Despite having smaller α, moist thermals are similarly dilute (quantified by a passive tracer) as dry thermals because of their greater mixing efficiency with the environment. Thus, moist thermals are substantially dilute but expand much less in size/volume as they rise compared to dry thermals. The α values for moist thermals in (dry) neutral and statically stable environments are similar, but fractional entrainment and especially detrainment rates are greater in the stable environment. Large detrainment rates are associated with a breakdown of the broader thermal vortex ring structure, especially with low environmental relative humidity, attributed in part to evaporation and buoyancy reversal.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Biomimetic Light Harvesting Complexes Based on Self-Assembled Dye-DNA Nanostructures (Final Technical Report)

A fundamental limitation in the development of artificial molecular light harvesting structures is that generally if one places pigment molecules close enough to achieve very high energy transfer efficiency and absorbance cross section, the dyes interact in such a way that self-quenching occurs. This limits both the optical cross section and the overall efficiency of light capture in such systems. Nature overcomes this problem and achieves efficient energy transfer without self-quenching by controlling the environment, vibration characteristics, orientation and dynamics of the pigments involved in light harvesting. Natural light harvesting systems have evolved highly intricate chromophore architectures of protein-bound organic molecules that absorb and funnel solar energy with high efficiency and fast transfer rates using elegant excitonic circuitries. Nature achieves this precise control over the properties of pigment complexes by using specific proteins as templates to guide the formation of very well-defined pigment aggregates, groups of pigment molecules that are in close enough contact to undergo excitonic interactions resulting in new electronic properties that were not present in the monomer. In synthetic systems, pigment aggregates are well known, and J-aggregates and H-aggregates have been long studied for their unique properties. In Nature, the chlorosomes of green bacteria form what appear to be classical J-aggregates and the light harvesting complexes of purple nonsulfur bacteria form ring structures that have many of the properties of J-aggregates such as a red-shifted absorbance spectrum and excited states that are delocalized over multiple pigment molecules. These photosynthetic systems leverage the spectral and enhanced transport properties of J-like aggregates to achieve fast exciton transport within the antenna and thus high light-harvesting efficiency. The close interaction of the pigments results in substantial electronic coupling that lifts the degeneracy of excitonic states and therefore modifies the absorption and emission spectra of the monomer. In the case of J-aggregation, lower energy excitonic states acquire significant oscillator strength, resulting in a characteristic bathochromic shift of the absorption and fluorescence and often superradiant delocalized exciton states.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Fuel-rich oxidation of gasoline surrogate components in an atmospheric flow reactor

Fuel-rich oxidation of three typical gasoline surrogate components, toluene, isooctane, and n-heptane, was investigated in an atmospheric-pressure flow reactor at mean gas temperatures from 1050 to 1350 K, equivalence ratio of 9.0, and residence times of 0.45 and 1.2 s. Not only polycyclic aromatic hydrocarbons (PAHs) up to 3 ring structure but also small intermediate products from C 1 to C 5 were quantified by a gas chromatograph mass spectrometry coupled with photon ionization and gas chromatograph with flame ionization detector, respectively. The kinetic model recently developed by Lawrence Livermore National Laboratory was revised to reflect the results of many recent investigations. Basically, the updated model could satisfactorily reproduce the experimental mole fractions of many species. The experimental and simulated results showed that PAH mole fractions produced were in the order of toluene, isooctane, and n-heptane. The kinetic analysis using the model was carried out to explore PAH formation pathways, especially focusing on naphthalene, acenaphthylene, and phenanthrene. Through rate of production analysis, it was found that the main formation pathways of many PAHs were affected by the fuels. Although resonantly stabilized radicals, such as benzyl and fulvenallenyl radicals, played a crucial role in the formation pathways of many PAHs in every fuel, they were produced through hydrogen elimination of toluene in toluene fuel, while they were formed from small intermediate products in isooctane and n-heptane fuels. Sensitivity analysis revealed the difference and similarity of the reactions with large positive coefficients according to the fuels studied here. In conclusion, the molecular growth reactions of aromatic species were influential in PAH production in every fuel, whereas the ring formation reactions from small species and the reactions involving toluene had large positive sensitivity coefficients in isooctane/n-heptane and toluene fuels, respectively.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Saddle-Shaped Third Component with Out-of-Plane Electrostatic Dipole for Realizing High-Performance Photovoltaic Donor Terpolymers

Terpolymer fabrication is an effective methodology for molecular engineering and generating high-performance organic photovoltaic materials to construct highly efficient polymer solar cells. Modification of the polymer PM6 by incorporating a third component resulting in the formation of a ternary copolymer is reported to outperform PM6 in achieving enhanced device performances. However, one of the major challenges in constructing high-performance terpolymers is to counter the molecular disorder caused by the backbone entropy induced by the third moiety. Here, in this work, double B←N bridged bipyridine (BNBP) is used as the third component, which possesses a strong out-of-plane electrostatic dipole owing to the saddle-shaped B←N fused ring structure. The out-of-plane dipole moment introduced in the modified PM6 terpolymer can be used as a means for tuning and optimizing the nanostructures of the blended films. The prepared PM6-BNBP-4 blend polymer with 4% of the benzodithiophene dione monomers replaced by BNBP results in excellent power conversion efficiency of 19.13%. This work demonstrates that the out-of-plane electrostatic dipole moment in saddle-shaped molecules is valuable for achieving high-performance organic photovoltaic donor materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Highly Durable Fluorinated High Oxygen Permeability Ionomers for Proton Exchange Membrane Fuel Cells

For proton exchange membrane fuel cells to be cost-competitive in light- and heavy-duty vehicle applications, their Pt content in the catalyst layers needs to be lowered. However, lowering the Pt content results in voltage losses due to high local oxygen transport resistances at the ionomer–Pt interface. It is therefore crucial to use ionomers that have higher oxygen permeability than Nafion. In this paper, novel high oxygen permeability ionomers (HOPIs) are presented, with up to five times higher oxygen permeability than Nafion, synthesized by copolymerization of perfluoro-2,2-dimethyl-1,3-dioxole (PDD) with perfluoro(4-methyl-3,6-dioxaoct-7-ene) sulfonyl fluoride (PFSVE). PDD is the source of higher permeability due to its open ring structure, while PFSVE provides ionic conductivity. Optimization of PDD content and equivalent weight enables increased fuel cell performance, mainly at high current densities, where HOPIs can achieve power densities >1.25 W cm -2 and exceed the 0.8 A cm -2 U.S. Department of Energy durability target by losing only 4.5 mV, which is over six times less than 30 mV. Finally, the interactions between HOPI and SO 3 - groups with a PtCo/C catalyst are also elucidated here at a fundamental level.

25 ENERGY STORAGE↗
DOE OSTI2022

Hydrogen Storage in Partially Exfoliated Magnesium Diboride Multilayers

Metal boride nanostructures have shown significant promise for hydrogen storage applications. However, the synthesis of nanoscale metal boride particles is challenging because of their high surface energy, strong inter- and intraplanar bonding, and difficult-to-control surface termination. Here, it is demonstrated that mechanochemical exfoliation of magnesium diboride in zirconia produces 3-4 nm ultrathin MgB 2 nanosheets (multilayers) in high yield. High-pressure hydrogenation of these multilayers at 70 MPa and 330 °C followed by dehydrogenation at 390 °C reveals a hydrogen capacity of 5.1 wt%, which is ≈50 times larger than the capacity of bulk MgB 2 under the same conditions. This enhancement is attributed to the creation of defective sites by ball-milling and incomplete Mg surface coverage in MgB 2 multilayers, which disrupts the stable boron-boron ring structure. The density functional theory calculations indicate that the balance of Mg on the MgB 2 nanosheet surface changes as the material hydrogenates, as it is energetically favorable to trade a small number of Mg vacancies in Mg(BH 4 ) 2 for greater Mg coverage on the MgB 2 surface. To conclude, the exfoliation and creation of ultrathin layers is a promising new direction for 2D metal boride/borohydride research with the potential to achieve high-capacity reversible hydrogen storage at more moderate pressures and temperatures.

08 HYDROGEN↗
DOE OSTI2020

Ionic/electronic conductivity regulation of n-type polyoxadiazole lithium sulfonate conductive polymer binders for high-performance silicon microparticle anodes

Low-cost silicon microparticles (SiMP), as a substitute for nanostructured silicon, easily suffer from cracks and fractured during the electrochemical cycle. A novel n-type conductive polymer binder with excellent electronic and ionic conductivities as well as good adhesion, has been successfully designed and applied for high-performance SiMP anodes in lithium-ion batteries to address this problem. Its unique features are attributed to the strong electron-withdrawing oxadiazole ring structure with sulfonate polar groups. The combination of rigid and flexible components in the polymer ensures its good mechanical strength and ductility, which is beneficial to suppress the expansion and contraction of SiMP s during the charge/discharge process. By fine-tuning the monomer ratio, the conjugation and sulfonation degrees of the polymer can be precisely controlled to regulate its ionic and electronic conductivities, which has been systematically analyzed with the help of an electrochemical test method, filling in the gap on the conductivity measurement of the polymer in the doping state. The experimental results indicate that the cell with the developed n-type polymer binder and SiMP (~0.5 μm) anodes achieves much better cycling performance than traditional non-conductive binders. It has been considered that the initial capacity of the SiMP anode is controlled by the synergetic effect of ionic and electronic conductivity of the binder, and the capacity retention mainly depends on its electronic conductivity when the ionic conductivity is sufficient. Here, it is worth noting that the fundamental research of this work is also applicable to other battery systems using conductive polymers in order to achieve high energy density, broadening their practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Constructing synthetic organosulfur additive for high voltage lithium-ion batteries

Despite its high anodic stability, common organosulfur solvents such as ethyl methyl sulfone and sulfolane typically exhibit poor solid-electrolyte interphase (SEI) formation capability. Here, to address this, the fluorinated organic sulfate 4-(trifluoromethyl)-1,3,2-dioxathiolane 2,2-dioxide (TFDTD) was developed as an effective additive for tailoring organosulfur-based electrolytes in lithium-ion batteries. This development was guided by the functionality selection principle and careful evaluation of feasibility in organic synthesis. TFDTD can be readily synthesized through the reaction between trifluoropropylene glycol and sulfuryl chloride. The ring structure of the organic sulfate enables the formation of a stable SEI on the anode, while the fluorination of the sulfate not only enhances its chemical stability and oxidation potential, but also its effectiveness to protect the anode by increasing its reduction potential, rendering it preferentially reduced on the anode surface before the decomposition of other electrolyte components. Introducing TFDTD facilitates the generation of a robust solidelectrolyte interphase on the graphite anode, significantly enhancing cell performance. Moreover, coupling the use of TFDTD with vinylene carbonate provides further protection on the cathode surface, enabling exceptionally stable, high-voltage, long-term cycling of Gr||NMC full cells.

Functionality selection principle↗
DOE OSTI2022

Temperature-dependent charge barrier height of amorphous germanium contact detector

The exploration of germanium (Ge) detectors with amorphous Ge (a-Ge) contacts has drawn attention to the searches for rare-event physics such as dark matter and neutrinoless double-beta decay. The charge barrier height (CBH) of the a-Ge contacts deposited on the detector surface is crucial to suppress the leakage current of the detector in order to achieve a low-energy detection threshold and high-energy resolution. The temperature-dependent CBH of a-Ge contacts for three Ge detectors is analyzed to study the bulk leakage current (BLC) characteristics. The detectors were fabricated at the University of South Dakota using homegrown crystals. The CBH is determined from the BLC when the detectors are operated in the reverse bias mode with a guard-ring structure, which separates the BLC from the surface leakage current (SLC). Here the results show that CBH is temperature dependent. The direct relation of the CBH variation to temperature is related to the barrier inhomogeneities created on the interface of a-Ge and crystalline Ge. The inhomogeneities that occur at the interface were analyzed using the Gaussian distribution model for three detectors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Detecting shearless phase-space transport barriers in global gyrokinetic turbulence simulations with test particle map models

In magnetically confined fusion plasmas, the role played by zonal 𝐸 x 𝐵 flow shear layers in the suppression of turbulent transport is relatively well understood. However, less is understood about the role played by the weak shear regions that arise in the non-monotonic radial electric field profiles often associated with these shear layers. In electrostatic simulations from the global total-𝑓 gyrokinetic particle-in-cell code XGC, we demonstrate how shearless regions with non-zero flow curvature form zonal ‘jets’ that, in conjunction with neighbouring regions of shear, can act as robust barriers to particle transport and turbulence spreading. By isolating quasi-coherent fluctuations radially localised to the zonal jets, we construct a map model for the Lagrangian dynamics of gyrokinetic test particles in the presence of drift waves. We identify the presence of shearless invariant tori in this model and verify that these tori act as partial phase-space transport barriers in the simulations. We also demonstrate how avalanches impinging on these shearless tori cause eddy detachment events that form ‘cold/warm core ring’ structures analogous to those found in oceanic jets, facilitating transport across the barriers without destroying them completely. We discuss how shearless tori may generically arise from tertiary instabilities or other types of discrete eigenmodes, suggesting their potential relevance to broader classes of turbulent fluctuations.

fusion plasma↗
DOE OSTI2021

Observation of Single-Electron Transport and Charging on Individual Point Defects in Atomically Thin WSe 2

Defects significantly impact the properties of 2D semiconductors, providing in-gap quantum states that can serve as a natural platform for single-electron operations, localization sites for excitons to serve as single-photon sources, and potentially quantum spin memories. To date, however, a microscopic observation of such a single-electron transport (SET) behavior has been rarely reported on single defects of 2D semiconductors. In this study, we report a SET and charge-state transition on individual point-defect states buried in the bilayer WSe 2 using scanning tunneling microscopy. SET characteristics of their states is evidenced by both the Coulomb staircase and the saturation behavior of the transport current, consistent with the SET model. Furthermore, we demonstrate that, through the local field of a scanning tunneling microscope tip, it is possible to successively charge the defects by single electrons, suggested by both the ring structures and charging peaks in dI/dV measurements. Our results provide new insights into the quantum nature of these defect-bound states, as well as the possibility of using their single-electron behavior and response for applications in quantum information and local-field sensing.

2D semiconductor↗