Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solution theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Shock interference prediction using direct simulation Monte Carlo

The shock interaction produced when an incident shock impinges on an inlet cowl lip is investigated for a cowl lip radius of 0.1 in. and flight conditions of Mach 15 and 35-km altitude. This problem is of interest in the design of hypersonic flight vehicles because the interference heating at the cowl lip surface from such a shock interaction is expected to be very high and the design of adequate thermal protection in this region will be challenging. Noncontinuum effects may be significant at this combination of altitude and small dimensions. If this is so, a computational solution based on the Navier-Stokes equations could significantly overpredict the surface heating on the cowl lip. Therefore, a kinetic theory solution technique, direct simulation Monte Carlo (DSMC), is used to predict the flowfield and surface heating. The details of modeling this problem and some preliminary results are presented. The same qualitative flow patterns are seen with DSMC and a continuum solution of the shock interference case, but the peak heating predicted with DSMC is somewhat lower.

Carlson, Ann B.↗
NASA NTRSDate not supplied

Modeling of Multicomponent Trace Contaminant Adsorption on Activated Carbon

Modeling of multicomponent trace contaminant adsorption on activated carbon for spacecraft life support applications presents challenges due to the very low contaminant concentrations in cabin air coupled with very strong adsorption of heavier components such as cyclic polydimethylsiloxanes. Both gas-phase and solid-phase micropore mass transfer resistances can be important, and competitive interactions between adsorbed components can result in behavior such as roll-up where lighter components displaced by heavier components have a higher concentration at the outlet than at the inlet. This paper describes the further development of a dynamic trace contaminant adsorption model based on Ideal Adsorbed Solution Theory (IAST). Alternative 1-dimensional and 2-dimensional versions of the model are described with different mass transfer resistance and driving force assumptions. Optimization of solution methods for speed and stability is also described. Mass balance equations are scaled to provide sensitivity over the wide range of component concentrations in cabin air. Model parameters are estimated from isotherm and breakthrough test data on single adsorbate and binary adsorbate systems. Multicomponent results are compared against predictions of a heritage model used extensively by NASA for trace contaminant control system (TCCS) carbon bed sizing. Finally, efforts to implement the model in a second software platform for wider access are described.

Kevin E Lange↗
NASA NTRS1982

Implicit unsteady transonic airfoil calculations at supersonic freestreams

The computer code LTRAN2 has been extended to compute unsteady transonic flows about oscillating airfoils with supersonic freestreams. The LTRAN2 code uses an alternating direction implicit (ADI) algorithm to solve the two-dimensional, nonlinear, low-frequency, transonic small-disturbance (LF-TSD) equation. The modified code, LTRAN2-SS, includes a 'high-frequency' option. Steady solutions are checked against those computed by the steady TSD code, TSFOIL; unsteady computations of the linear LF-TSD equation are compared with known linear theory solutions; and new unsteady nonlinear solutions are presented. These cases include standard AGARD test cases for the NLR 7301, MBB-A3, and DO Al supercritical airfoils, as well as several NACA airfoils. The modified code enables aerodynamicists to quickly and efficiently compute transonic flows for both subsonic and supersonic freestreams, and thus resolve flutter boundaries through the full extent of the transonic dip phenomenon.

Chow, L. J.↗
NASA NTRS1948

Lifting-surface-theory aspect-ratio corrections to the lift and hinge-moment parameters for full-span elevators on horizontal tail surfaces

A limited number of lifting-surface-theory solutions for wings with chordwise loadings resulting from angle of attack, parabolic-ac camber, and flap deflection are now available. These solutions were studied with the purpose of determining methods of extrapolating the results in such a way that they could be used to determine lifting-surface-theory values of the aspect-ratio corrections to the lift and hinge-moment parameters for both angle-of-attack and flap-deflection-type loading that could be used to predict the characteristics of horizontal tail surfaces from section data with sufficient accuracy for engineering purposes. Such a method was devised for horizontal tail surfaces with full-span elevators. In spite of the fact that the theory involved is rather complex, the method is simple to apply and may be applied without any knowledge of lifting-surface theory. A comparison of experimental finite-span and section value and of the estimated values of the lift and hinge-moment parameters for three horizontal tail surfaces was made to provide an experimental verification of the method suggested. (author)

Swanson, Robert S↗
NASA NTRS1957

Thin airfoil theory based on approximate solution of the transonic flow equation

A method is presented for the approximate solution of the nonlinear equations transonic flow theory. Solutions are found for two-dimensional flows at a Mach number of 1 and for purely subsonic and purely supersonic flows. Results are obtained in closed analytic form for a large and significant class of nonlifting airfoils. At a Mach number of 1 general expressions are given for the pressure distribution on an airfoil of specified geometry and for the shape of an airfoil having a prescribed pressure distribution. Extensive comparisons are made with available data, particularly for a Mach number of 1, and with existing solutions.

WING-SECTION THEORY↗
NASA NTRS1952

Hydrodynamic impact of a system with a single elastic mode I : theory and generalized solution with an application to an elastic airframe

Solutions of impact of a rigid prismatic float connected by a massless spring to a rigid upper mass are presented. The solutions are based on hydrodynamic theory which has been experimentally confirmed for a rigid structure. Equations are given for defining the spring constant and the ratio of the sprung mass to the lower mass so that the two-mass system provides representation of the fundamental mode of an airplane wing. The forces calculated are more accurate than the forces which would be predicted for a rigid airframe since the effect of the fundamental mode on the hydrodynamic force is taken into account. In a comparison of the theoretical data with data for a severe flight-test landing impact, the effect of the fundamental mode on the hydrodynamic force is considered and response data are compared with experimental data.

Mayo, Wilbur L↗
NASA NTRS1975

Analysis of liquid metal embrittlement from a bond energy viewpoint

Absorption induced embrittlement of solid metals by certain liquid metals is analyzed through an Engel-Brewer calculation of the solid-liquid interaction energy, and of the effect of the latter in reducing fracture surface energy. The reduction in fracture surface energy is estimated by comparison of the electronic contribution to the solid-liquid interaction energy with solid-solid bond energy for some 40 liquid-solid couples. Regular solution theory is used to estimate mutual solubility as the relative difference in parameter values. Embrittlement can be predicted by using reduction in fracture surface energy and solubility parameter difference as critical variables. The effect of solute additions to the liquid on the degree of embrittlement is interpreted via the same two variables; the principal effect of solutes is to modify solubility relationships at the solid-liquid interface.

Kelley, M. J.↗
NASA NTRS1972

Application of thermodynamics to silicate crystalline solutions

A review of thermodynamic relations is presented, describing Guggenheim's regular solution models, the simple mixture, the zeroth approximation, and the quasi-chemical model. The possibilities of retrieving useful thermodynamic quantities from phase equilibrium studies are discussed. Such quantities include the activity-composition relations and the free energy of mixing in crystalline solutions. Theory and results of the study of partitioning of elements in coexisting minerals are briefly reviewed. A thermodynamic study of the intercrystalline and intracrystalline ion exchange relations gives useful information on the thermodynamic behavior of the crystalline solutions involved. Such information is necessary for the solution of most petrogenic problems and for geothermometry. Thermodynamic quantities for tungstates (CaWO4-SrWO4) are calculated.

Saxena, S. K.↗
NASA NTRS1973

A kernel function method for computing steady and oscillatory supersonic aerodynamics with interference.

The method presented uses a collocation technique with the nonplanar kernel function to solve supersonic lifting surface problems with and without interference. A set of pressure functions are developed based on conical flow theory solutions which account for discontinuities in the supersonic pressure distributions. These functions permit faster solution convergence than is possible with conventional supersonic pressure functions. An improper integral of a 3/2 power singularity along the Mach hyperbola of the nonplanar supersonic kernel function is described and treated. The method is compared with other theories and experiment for a variety of cases.

Cunningham, A. M., Jr.↗
NASA NTRS1974

Oscillatory supersonic kernel function method for interfering surfaces

In the method presented in this paper, a collocation technique is used with the nonplanar supersonic kernel function to solve multiple lifting surface problems with interference in steady or oscillatory flow. The pressure functions used are based on conical flow theory solutions and provide faster solution convergence than is possible with conventional functions. In the application of the nonplanar supersonic kernel function, an improper integral of a 3/2 power singularity along the Mach hyperbola is described and treated. The method is compared with other theories and experiment for two wing-tail configurations in steady and oscillatory flow.

Cunningham, A. M., Jr.↗
NASA NTRS2004

Integrated Force Method Solution to Indeterminate Structural Mechanics Problems

Strength of materials problems have been classified into determinate and indeterminate problems. Determinate analysis primarily based on the equilibrium concept is well understood. Solutions of indeterminate problems required additional compatibility conditions, and its comprehension was not exclusive. A solution to indeterminate problem is generated by manipulating the equilibrium concept, either by rewriting in the displacement variables or through the cutting and closing gap technique of the redundant force method. Compatibility improvisation has made analysis cumbersome. The authors have researched and understood the compatibility theory. Solutions can be generated with equal emphasis on the equilibrium and compatibility concepts. This technique is called the Integrated Force Method (IFM). Forces are the primary unknowns of IFM. Displacements are back-calculated from forces. IFM equations are manipulated to obtain the Dual Integrated Force Method (IFMD). Displacement is the primary variable of IFMD and force is back-calculated. The subject is introduced through response variables: force, deformation, displacement; and underlying concepts: equilibrium equation, force deformation relation, deformation displacement relation, and compatibility condition. Mechanical load, temperature variation, and support settling are equally emphasized. The basic theory is discussed. A set of examples illustrate the new concepts. IFM and IFMD based finite element methods are introduced for simple problems.

Patnaik, Surya N.↗
NASA NTRS1962

Elastic and Plastic Stability of Orthotropic Cylinders

By utilizing linear stability theory, solutions for elastic buckling of short and moderate length orthotropic cylinders under axial compression are presented and correlated with experimental results on circumferentially stiffened cylinders. The plastic buckling of short and moderate length isotropic and orthotropic cylinders is also investigated and the theoretical results correlated with available experimental data. A discussion of the effects of finite deflection and initial imperfection is presented in order to explain the correlation obtained between the theory and the experimental data.

ELASTIC BUCKLING↗
NASA NTRS1976

Determination of optimum planforms for control surfaces

A theoretical analysis is made to determine the optimum chord distribution, location, and extent of control surfaces, with the ratio of hinge moment to effectiveness as the criterion. Expressions for the effectiveness - for ailerons, the rolling moment, and for tail surfaces, the change of lift on the tail due to deflection of the surface-were derived from lifting line theory. Solutions found for a range of airfoil planforms indicate that, regardless of the characteristics of the tail surface, the chord of the rudder or the elevator should be very nearly constant over its span. The optimum ailerons are also of a characteristics shape, varying little with the planform of the wing.

Jones, R. T.↗
NASA NTRS1979

Advanced methods for preparation and characterization of infrared detector materials

Crystal growth of Hg sub 1-x Cd sub x Te and density measurements of ingot slices are discussed. Radial compositional variations are evaluated from the results of infrared transmission edge mapping. The pseudo-binary HgTe-CdTe phase diagram is examined with reference to differential thermal analysis measurements. The phase equilibria calculations, based on the 'regular association solution' theory (R.A.S.) are explained and, using the obtained R.A.S. parameters, the activities of Hg, Cd, and Te vapors and their partial pressures over the pseudo-binary melt are calculated.

Lehoczy, S. L.↗
NASA NTRS1982

Solubility of Sulfur Dioxide in Sulfuric Acid

The solubility of sulfur dioxide in 50% (wt./wt.) sulfuric acid was evaluated by regular solution theory, and the results verified by experimental measurements in the temperature range of 25 C to 70 C at pressures of 60 to 200 PSIA. The percent (wt./wt.) of sulfur dioxide in 50% (wt./wt.) sulfuric acid is given by the equation %SO2 = 2.2350 + 0.0903P - 0.00026P 10 to the 2nd power with P in PSIA.

Chang, K. K.↗
NASA NTRS1987

Recursive Robot-Arm Dynamics via Filtering and Smoothing

Forward and inverse dynamics solved using Kalman filtering and Bryson-Frazier smoothing. Dynamics of serial-link robot arm solved by using recursive techniques from linear filtering and smoothing theory. Solutions of dynamical equations give forces, moments, and accelerations at joints between links, and multilink inertia matrix and its inverse. Theoretical developments lay foundation for use of filtering and smoothing techniques in design of robot controls.

Rodriguez, Guillermo↗