Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid Earth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Improving Projections of Antarctic Ice Sheet Contribution to Sea‐Level Change Through 2300 by Capturing Gravitational, Rotational, and Deformational Effects

Ice-mass change induces regionally varying patterns of sea-level change due to gravitational, rotational, and deformational (GRD) effects, which in turn influence marine-based ice stability in Antarctica. For improved projection of the Antarctic Ice Sheet (AIS), there is a need for including GRD effects in modeling and improving understanding of basin-by-basin sensitivity of ice evolution to GRD effects under a range of climate scenarios. We couple a high-resolution, higher-order ice-sheet model with a 1D global sea-level model that fully captures GRD effects, and simulate ice evolution in Antarctica under the Ice Sheet Model Intercomparison Project for CMIP6 experiments. We perform two sets of coupled simulations incorporating 1D Maxwell solid Earth structure suitable for West and East Antarctica and show that the Amundsen Sea Embayment (ASE) in West Antarctica has the highest sensitivity to GRD effects—in high-emission scenarios, grounding-line retreat accelerates by hundreds of kilometers by 2300 without GRD effects, but GRD effects delay this retreat on a timescale of decades. However, we find that delay times do not show a clear relationship to the strength of climate forcing alone. Furthermore, GRD effects can influence ice-sheet dynamics more than the choice of climate model for a given emissions scenario. In contrast, East Antarctica exhibits minimal sensitivity to GRD effects throughout the study period. These findings underscore the critical role of GRD effects in shaping future West AIS evolution, highlighting the importance of constraining the regional 3D Earth structure and bed topography in West Antarctica, particularly the ASE.

58 GEOSCIENCES↗
DOE OSTI2026

Crustal Deformation and Gravitational Effects From Dynamic Ocean Mass Redistribution Impact Projected Sea‐Level Change

As the climate warms, associated changes in ocean dynamics will redistribute sea‐water mass within the ocean, contributing to relative sea‐level change. This mass redistribution will cause additional sea‐level changes due to gravitational self‐attraction, deformation of the solid Earth, and shifts in the Earth's rotation axis (GRD), which are not incorporated in sea‐level projections. Using CMIP6 climate model output, we quantify relative sea‐level changes induced by GRD from ocean‐dynamic mass loading through 2100. These effects act to amplify projected ocean‐dynamic sea‐level patterns, causing sea‐level rise in coastal regions, particularly along wide continental shelves and at high latitudes. On average, the magnitude of such GRD‐induced sea‐level change is equivalent to ∼15% of the signal due to dynamic ocean mass redistribution. Although our results show substantial inter‐model spread, they reveal that GRD‐induced relative sea‐level changes from ocean mass redistribution represent a non‐negligible component of regional sea‐level change and should be considered in projections.

58 GEOSCIENCES↗
DOE OSTI2025

Advances in geophysical forensic event monitoring

Forensic analysis of man-made, non-nuclear events (such as industrial accidents, explosion experiments and mine collapses) has become more frequent and detailed owing to advancements in geophysical monitoring. Here, in this Technical Review, we demonstrate how geophysical forensic monitoring using seismic, infrasound and hydroacoustic recordings provides insights on events in the solid earth, atmosphere and underwater. Advanced techniques, including machine-learning-based models, have been developed to detect, identify and investigate these events, providing information on location, subevents, sources and explosive yield. The increase in data availability, application of advanced methods and computation and the growth of multitechnology approaches have increased the accuracy of forensic event analysis and enabled more realistic characterization of uncertainties. For example, the 2020 Beirut explosion in Lebanon demonstrated that various seismic, acoustic and other methods could be used to estimate explosive yield (and yield uncertainties) of about 1 ktonne, providing confidence in the application of these methods to smaller events where data are available. However, forensic investigations remain largely limited to known events with identified sources. Increased access to data, sophisticated analysis methods and high-resolution earth models will improve forensic event analysis further, enabling civil and scientific applications, such as localization in the search for the lost ARA San Juan submarine.

geophysics↗
DOE OSTI2025

Observations and seismoacoustic simulations of earthquake-generated infrasound waves in non-epicentral regions

We analysed infrasound waves associated with the Gyeongju earthquake (ML 5.8) that occurred on 2016 September 12, in the southeastern Korean Peninsula. For infrasound wave detection, the Progressive Multichannel Correlation method was applied to the infrasound data set recorded at seven arrays operating in South Korea at epicentral distances ranging from 178 to 472 km. Based on the back-projection method constrained by array-dependent celerity and azimuth deviation models, the source regions were identified in both the epicentral and non-epicentral regions. Remarkably, the non-epicentral secondary sources of this earthquake were located in regions with shallow water depths: (i) the western coastal area in the Yellow Sea and (ii) the shallow ocean basin and bank in the East Sea. The location results obtained from the earthquake could be corroborated through its foreshock (ML 5.1), yielding location results consistent with those of the main shock. The generation of infrasound waves over shallow water depths was fortuitously validated by direct recordings of dominant single-frequency (~0.3 Hz) infrasound waves at close range via temporary sensors near the ocean basin and bank. We interpreted that low-frequency infrasound signals could be generated from interactions among the ocean floor, shallow seawater and atmosphere. We performed numerical simulations of seismoacoustic fields to predict ground motions on the seafloor and acoustic transmission efficiency between the water and air interface. The simulations quantified the energy transfer through different media and clarified our observational results. We found that because this solid Earth‒water‒atmosphere coupled air wave has a relatively low frequency (~0.3 Hz), it can survive propagation over long distances compared with high-frequency infrasound waves generated in inland and mountain regions. In this study, we extend our understanding of water‒atmosphere coupling and the monitoring framework for earthquake-associated non-epicentral infrasound waves, encompassing not only inland ground shaking but also shallow sea regions located far from the epicentre.

Earthquake monitoring and test-ban treaty verifica↗
DOE OSTI2024

Preparing an on-Demand Cloud Processing Workflow for NISAR Ecosystems Science Products

In preparation for the NISAR launch and data collection in 2024, the NISAR Project Science Team is building workflows for each Science Team discipline (Ecosystems, Cryosphere, and Solid Earth). This abstract focuses on the Ecosystem disciplines and the development of on-demand cloud-processing workflows for wetlands inundation, forest biomass, agricultural active crop area, and forest disturbance. The workflow simulates NISAR data using UAVSAR or ALOS-2 Single Look Complex data, which are processed to Level 2 geocoded polarimetric covariance matrix products using InSAR Scientific Computing Environment 3.0 software and to Level 3 science products using the Algorithm Theoretical Basis Documents. In this presentation, we describe these workflows and efforts to improve efficiency and data accessibility by using a cloud processing system. We present preliminary sample products from each Ecosystem discipline: inundation, forest biomass, crop area, and forest disturbance.

Christensen, Alexandra↗
DOE OSTI2024

Volcanic arc rigidity variations illuminated by coseismic deformation of the 2011 Tohoku-oki M9

Rock strength has long been linked to lithospheric deformation and seismicity. However, independent constraints on the related elastic heterogeneity are missing, yet could provide key information for solid Earth dynamics. Using coseismic Global Navigation Satellite Systems (GNSS) data for the 2011 M9 Tohoku-oki earthquake in Japan, we apply an inverse method to infer elastic structure and fault slip simultaneously. We find compliant material beneath the volcanic arc and in the mantle wedge within the partial melt generation zone inferred to lie above ~100 km slab depth. We also identify low-rigidity material closer to the trench matching seismicity patterns, likely associated with accretionary wedge structure. Along with traditional seismic and electromagnetic methods, our approach opens up avenues for multiphysics inversions. Those have the potential to advance earthquake and volcano science, and in particular once expanded to InSAR type constraints, may lead to a better understanding of transient lithospheric deformation across scales.

58 GEOSCIENCES↗
DOE OSTI2024

Codes for "Shallow Soil Response to a Buried Chemical Explosion with Geophones and Distributed Acoustic Sensing" DAG - 01101646

The codes reproduce the figures of the manuscript entitled "Shallow Soil Response to a Buried Chemical Explosion with Geophones and Distributed Acoustic Sensing" submitted to Journal of Geophysical Research - Solid Earth. Geophone data and Distributed acoustic sensing (DAS) data recorded during the Phase II of the The Source Physics Experiment (SPE) along a fiber-optic cable offshore were processed to understand the response of the shallow subsurface to an explosion. This Ground-based Nuclear Detonation Detection (GNDD), Low Yield Nuclear Monitoring (LYNM), and Source Physics Experiment (SPE) research was funded by the National Nuclear Security Administration, Defense Nuclear Nonproliferation Research and Development (NNSA DNN R&D).

Viens, Loic↗
DOE OSTI2023

A New Decade in Seismoacoustics (2010–2022)

Several sources of interest often generate both low‐frequency acoustic and seismic signals due to energy propagation through the atmosphere and the solid Earth. Seismic and acoustic observations are associated with a wide range of sources, including earthquakes, volcanoes, bolides, chemical and nuclear explosions, ocean noise, and others. The fusion of seismic and acoustic observations contributes to a better understanding of the source, both in terms of constraining source location and physics, as well as the seismic to acoustic coupling of energy. Here in this review, we summarize progress in seismoacoustic data processing, including recent developments in open‐source data availability, low‐cost seismic and acoustic sensors, and large‐scale deployments of collocated sensors from 2010 to 2022. Similarly, we outline the recent advancements in modeling efforts for both source characteristics and propagation dynamics. Finally, we highlight the advantages of fusing multiphenomenological signals, focusing on current and future techniques to improve source detection, localization, and characterization efforts. This review aims to serve as a reference for seismologists, acousticians, and others within the growing field of seismoacoustics and multiphenomenology research.

58 GEOSCIENCES↗
DOE OSTI2022

Bayesian Seismoacoustic Source Location: Acoustic Approach

Seismic waves and infrasound are key technologies in the International Monitoring System (IMS) to monitor explosive events in the solid Earth and atmosphere. Energetic man-made or natural events (e.g., chemical/nuclear explosions, volcanic eruptions, and earthquakes) near the Earth’s surface produce both ground motion and atmospheric pressure disturbances which propagate as seismic waves and infrasound, respectively. Seismic waves have been generally used to detect and identify underground and near-surface events (Myers, et. al., 2007), and infrasound are sensitive to events near the surface or in the atmosphere (Modrak et. al., 2010). Due to their different sensitivities to events, they can complement to each other to improve the event detection and discrimination. The framework of joint seismoacoustic event location has recently reviewed by theoretical research (Koch and Arrowsmith, 2019). Although the early applications showed promising results to improve the accuracy of event location, their application were still limited to a small set of events selected to prove the concepts, and practical capability of the method for operational purpose is not fully evaluated with data. Our final goal is to apply the method of seismoacoustic event location to a larger set of events and evaluate its applicability for operational event location in practice. To that end, we focus on developing and verifying acoustic source location method in this study.

58 GEOSCIENCES↗
DOE OSTI2023

Field Results from New Tensor Borehole Optical Fiber Strainmeter Installations in Oklahoma and Utah

The time evolving strain field contains a wealth of information that can be used to interpret subsurface behavior. For example, injecting or removing fluids from reservoirs or aquifers causes deformation that can be used as a diagnostic signal in some cases, while it can interfere with geodetic interpretations in other cases. We've previously demonstrated the feasibility of measuring the strain tensor at a depth of 30m caused by injection into a reservoir at 530m. The observed strain signals were interpreted using four independent analytic and numerical methods that resulted in estimates of the poroelastic properties and geometry of the reservoir that was consistent with data from well logs. However, studies like these are only possible if these deformations can be reliably measured. Years of lab and field work has culminated in the development of a novel borehole strainmeter capable of resolving multiple components of strain using embedded optical fibers configured as Michelson interferometers. It features four horizontal gauges separated by 45° to resolve the horizontal strain tensor as well as a vertical strain gauge and a sixth null component for state-of-health monitoring. The downhole sensing package also includes an open pipe through its center for grout circulation during single-trip deployments and a fully welded stainless steel exterior for robustness and longevity. These instruments have a resolution of 2x10-13 strain that can easily measure the solid earth tides. Preliminary data are available from four strainmeters in shale at our Oklahoma site and four in compacted sand and gravel in Utah. These are deployed from 40-60m, except one of the strainmeters in Oklahoma is deployed at 500m. The data include strains from the initial grout curing, comparisons to predicted earth tide models and in-situ calibration results, barometric pressure admittances and spectral analyses as well as signals from underground injections and surface waves from teleseismic events. Preliminary analyses indicate behavior consistent with other strainmeter deployments, and comparison to data from a Gladwin strainmeter at the Oklahoma site validate the performance of the new design. Analyses from a suite of six well tests at the Oklahoma site show for the first time how the strain tensor field varies with location during well testing.

DeWolf, Scott↗
DOE OSTI2026

The Influence of Shallow Subsurface Properties on Particle Motion in Acoustic-Seismic Coupling

Atmospheric acoustic waves transmit energy into the solid Earth through air-to-ground coupling. These waves are recorded by seismic sensors and provide insight into both atmospheric phenomena and subsurface properties. Interpreting these signals is often challenging because they are modulated by subsurface structure and the incidence angle of the acoustic wave. This study examines acoustic--seismic coupling generated by the 2012 Camp Minden Explosion, which was recorded by hundreds of seismoacoustic stations. We apply a novel technique to quantify the seismic particle motion, model coupled waves with a propagator matrix approach, and apply a Bayesian inversion to infer properties of the shallow subsurface. Our analysis reveals that prograde motion is widespread and focused in low shear-wave velocity regions, such as the Mississippi Embayment, and retrograde motion is more common in higher shear-velocity areas. Inversion results at some stations produce plausible subsurface models with strong waveform fits, while inversions at other sites are less successful. These results indicate prograde particle motion in air-to-ground coupled waves is more prevalent than previously recognized and may serve as a diagnostic for shallow velocity structure. Our comprehensive modeling and inversion framework provides a potential method to extract layered near-surface properties from acoustic-seismic coupling observations.

58 GEOSCIENCES↗
DOE OSTI2024

Xenon compatibility in magmatic processes: Hadean to current contexts

Xenon (Xe) behaviour in petrological processes, albeit essential to constrain mantle ingassing and degassing models, is elusive due to its volatile nature, and lack of direct investigation at the pressures (P) and temperatures (T) relevant to magma formation and crystallisation at depth. Xenon stands out amongst noble gases due to its unique reactivity with silicates of the lower crust and upper mantle, which could at least partially explain that published mineral/melt partitioning coefficients span up to six orders of magnitude. We report partition coefficients of Xe using in situ X-ray fluorescence at high P and T, and mass spectrometry analyses. Xenon is found to be moderately incompatible in anorthite-clinopyroxene mix in equilibrium with basalt (partition coefficient value of 0.16 ± 0.06), and compatible in olivine in equilibrium with basalt (partition coefficients in the range 88 ± 22 to 302 ± 46). While Xe is, thus, concentrated in basaltic melts coexisting with crystallising pyroxenes and feldspars, it is strongly retained in olivine at depth. Consequently, Xe originally contained in solid Earth has been preferentially retained at depth throughout Earth’s history, from the magma ocean stages to present day partial mantle melting processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Soil biogeochemical properties and metrics of tree-mycorrhizal dominance for a 25-Ha forest in South Central Indiana, USA.

This data package contains a dataset used in the papers “Seeing the forest for all the trees: Mycorrhizal-associated nutrient economies are modulated by stem density and the synchrony between overstory and understory communities” and “Mycorrhizal associations of tree species influence soil nitrogen dynamics via effects on soil acid–base chemistry”. Four csv files are included along with a dataset. The dataset features chemical soil properties for a single sampling campaign within the 25 Ha Lilly-Dickey Woods Smithsonian Forest Global Earth Observatory (ForestGEO) plot in South Central Indiana, USA (ldw_dat_raw.csv). Also included are separate files focused on pH (pH_data.csv), carbon and nitrogen (CN_data.csv), and nitrification rates (Nitrification_data.csv). These variables are commonly associated with the tree-mycorrhizal dominance of forest stands. In these data subsets, each soil variable was matched to a 10 meter radius neighborhood wherein metrics of tree-mycorrhizal dominance (basal area, stem count, importance value, etc.) were calculated. Models between these soil variables and dominance metrics were used to investigate how different assessments of mycorrhizal associated nutrient economies (MANE) capture these relationships. This research was performed as a part of the Smithsonian ForestGEO project. This data package can be used to explore spatial variability in soil chemistry within a mature hardwood forest, or it can be combined with the included tree data, other fine-scale spatial information, or other tree inventory data for the site to evaluate how soil chemistry varies with tree community composition or edaphic or topographic properties.

Craig, Matthew [ORNL] (ORCID:0000000288907920)↗
DOE OSTI2026

Data for "Depth of nutrient uptake by deep-rooted plants is regulated by water availability"

The data set consists of strontium (Sr) isotope ratios (87Sr/86Sr), water isotopes, soil cation concentrations, soil water potential sensor data, and results of 87Sr/86Sr mixing model. The plant canopy size files include the dataset of canopy dimension of sagebrush, lupine, and sunflower. The soil and plant ICPMS (Inductively Coupled Plasma Mass Spectrometry) data file includes both of 87Sr/86Sr, and cation concentration dataset from soil exchangeable pool, apatite pool, silicate extract, atmospheric rain deposition, and plant leaf and stem tissues. The plant dendrochronology file includes the dendrochronogical ring width of several sagebrush, and dendrochemical sample data includes the 87Sr/86Sr for each separated growth ring. The modeling result gives the proportion of nutrient sources of each plants (based on their 87Sr/86Sr in leaf tissues and growth rings) from atmospheric deposition and mineral weathering. Soil water potential data includes continuous collection of soil water potential dataset at 2 depths (30 cm and 60 cm, from Nov 24 - Jun 25) of the sampling site. All the samples were collected from 2 sampling campaign June and July 2023, and rain water is a separate sampling from Aug - Sept 2023, at north-facing hillslope near pumphouse site. The data showed that the depth of cation nutrient acquisition is thus tightly coupled with, and likely determined by, water availability in soil, saprolite and bedrock. The enhanced uptake of cations and water from regions of mineral weathering could confer plant and ecosystem resilience during low water years and may impact the rate of bedrock weathering and watershed chemistry during drought. This dataset includes a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata; a data dictionary (dd.csv) file that contains column/row headers used throughout the files along with a definition, units, and data type; a location metadata file (locations.csv); and a samples metadata file (samples.csv). All files are provided as comma-separated values (CSV) files (.csv). This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Milone eTape Liquid Level Sensor Laboratory Calibration with a Commercial 12.2 cm HS-Flume and 3D Printed 4 cm Micro-HS-Flumes

The NGEE Arctic Rainfall Simulator (NARS) is a variable intensity rainfall simulator (RFS) with a frame design based on the Humphry et al. (2002) RFS and a water delivery system based on the Walnut Gulch (Paige et al., 2004) RFS. The NARS uses an aluminum frame that is fully deconstructable for transportation to field locations and a water system that enables variable rain intensity. Prior to field deployment, H-flume discharge and the corresponding Milone eTape Liquid Level Sensor (eTape) resistance values were measured in the laboratory so that discharge measurements from the NGEE Arctic Rainfall Simulator could be automated. eTape resistance was measured with increasing fluid heights for the full range of the eTape to calculate sensor detection limits and resolution. The eTape was calibrated to both a commercially available 12.2 cm HS-flume and a 3D printed 4 cm Micro-HS-flume. This data package contains two .csv files, one for the eTape calibration and the other for the flume calibrations, and two .stl files to 3D print the 4 cm Micro-HS-Flume design with a 1 cm x 3.6 cm stilling well opening. The .stl files can be opened in most 3D printing or CAD programs/software. Two .kml files of the laboratory location and broader area where testing was conducted are also included in this data package.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Trace Metal Content and Speciation, Water and Soil Chemistry, and Methane Production for a Wetland in Missouri (September 2015) and in Florida (January 2016)

Data is associated with a manuscript in preparation for submission to explore whether low trace metal availability inhibits methane production in freshwater wetland soils. Reported data are from two field sites, one in Missouri and the second in Florida (see location data). At each site, surface water compositions and properties and soil compositions are reported. Trace metal availability is assessed via sequential chemical extractions, Ni K-edge X-ray absorption near edge structure (XANES) spectroscopy, and X-ray microfluorescence imaging. Soil mineralogy is determined via powder X-ray diffraction. Multi-energy X-ray microfluorescence imaging as well as bulk and microscale S K-edge XANES spectra assess sulfur speciation in the soils. This package also reports data from trace metal amendment experiments, specifically methane (CH4) production versus time in soil incubations, the dissolved trace metal concentrations in these incubations, and the Ni K-edge XANES and extended X-ray absorption fine structure (EXAFS) spectra of soils to which increasing concentrations of Ni were added. A final version of this package will be published upon acceptance of the associated manuscript.

54 ENVIRONMENTAL SCIENCES↗