SEARCH · Engineering Papers
Results for “soft x-ray absorption spectroscopy”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Thermal Conversion of Ultrathin Nickel Hydroxide for Wide Band Gap 2D Nickel Oxides
Wide band gap (WBG) semiconductors (E g > 2.0 eV) are integral to the advancement of next-generation electronics, optoelectronics, and power industries owing to their capability for high-temperature operation, high breakdown voltage, and efficient light emission. Enhanced power efficiency and functional performance can be attained through miniaturization, specifically via the integration of device fabrication into a two-dimensional (2D) structure enabled by WBG 2D semiconductors. However, as an essential subgroup of WBG semiconductors, 2D transition metal oxides (TMOs) remain largely underexplored in terms of physical properties and applications in 2D optoelectronic devices, primarily due to the scarcity of sufficiently large 2D crystals. Thus, our goal is to develop synthesis pathways for 2D TMOs possessing large crystal domains (e.g., >10 μm), expanding the 2D TMO family and providing insights for future engineering of 2D TMOs. Here, we demonstrate the synthesis of WBG 2D nickel oxide (NiO) (E g > 2.7 eV) thermally converted from 2D nickel hydroxide (Ni(OH) 2 ) with a lateral domain size larger than 10 μm. Moreover, the conversion process is investigated using various microscopic techniques, such as atomic force microscopy, Raman spectroscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy, providing significant insights into morphology and structural variations under different oxidative conditions. The electronic structure of the converted Ni x O y is further investigated using multiple soft X-ray spectroscopies, such as X-ray absorption and emission spectroscopies.
Polarization-dependent resonant inelastic x-ray scattering of β-Ga2O3: An experimental and computational study
The bulk electronic structure of β-Ga2O3 single crystals was investigated using oxygen K-edge x-ray emission and absorption spectroscopy as well as resonant inelastic soft x-ray scattering. Spectra were obtained for different orientations of the crystal planes with respect to the polarization vector of the incident x-ray beam. The spectra are analyzed with calculations based on density functional theory and using the Bethe–Salpeter equation in the ocean code to take the core–hole interaction into account. These calculations correctly capture all the main features in the experimental spectra, demonstrating the potential of the approach to predict the electronic properties of similar compounds. We find a pronounced anisotropy as a function of the excitation polarization vector and significant differences in the spectral contributions from the inequivalent oxygen atoms of β-Ga2O3.
Impact of Local Structure in Supported CaO Catalysts for Soft-Oxidant-Assisted Methane Coupling Assessed through Ca K-Edge X-ray Absorption Spectroscopy
Not Available
Elucidating Norrish type I reactive pathways by ultrafast X-ray absorption spectroscopy
Norrish type I reactions selectively cleave carbon–carbon bonds directly adjacent to carbonyl groups. Despite their broad use in combination with aromatic carbonyls for additive manufacturing and dental UV curing applications, the nature of the photochemically active state and its population mechanism remain insufficiently understood. Detailed mechanistic insight requires mapping of the photoexcited population flow involving internal conversion and intersystem crossing. We present a time-domain study of gas phase acetophenone as a prototypical aromatic carbonyl combining soft X-ray time-resolved near-edge X-ray absorption fine structure (TR-NEXAFS) spectroscopy at the oxygen K-edge with ab initio multiple spawning (AIMS) simulations. Exploiting the specific sensitivity of TR-NEXAFS spectroscopy to states with nπ* character, we observe population transfer from the initially excited 1 ππ* state to the 1 nπ* state with a time constant of (0.13 ± 0.02) ps after an initial induction period of (0.12 ± 0.02) ps without population transfer, in quantitative agreement with the AIMS simulations. The population in the 1 nπ* state subsequently decays via intersystem crossing, likely mediated by a 3 ππ* state, within (3.17 ± 0.66) ps to a long-lived 3 nπ* state, which is presumed to be active towards Norrish type I chemistry.
The chemRIXS Instrument for Solution-Phase Resonant Inelastic X-ray Scattering at the Linac Coherent Light Source
The chemRIXS instrument at the Linac Coherent Light Source (LCLS) offers new opportunities for studying solution-phase systems with time-resolved soft X-ray spectroscopic methods such as resonant inelastic X-ray scattering (RIXS) using the recently commissioned high-repetition-rate LCLS-II X-ray free electron laser. The orders-of-magnitude X-ray flux improvement provided by the superconducting accelerator, combined with corresponding advances in the optical laser system and the liquid jet recirculation system, enables studies on dilute systems with high signal-to-noise compared to what was possible with the LCLS-I copper accelerator. These capabilities open up time-resolved X-ray absorption spectroscopy and RIXS to entirely new classes of samples, as well as enabling the development of new soft X-ray spectroscopic methods on liquid samples. An overview of the beamline components and the first LCLS-II commissioning results are presented.
Chemical speciation correlated with microstructural heterogeneity of interdicted uranium materials
Two uranium powders seized by law enforcement in Victoria, Australia, have been characterized by established nuclear forensic methods in a previously published study. Here, in this work, the results of further characterization by a scanning transmission x-ray microscope (STXM) operating in the soft x-ray regime are reported. STXM images are used to estimate the elemental distribution in micrometer-scale particles of each powder, and oxygen K-edge absorption spectra are used to determine the chemical state of uranium. The results of the current study are consistent with the previous analysis; the first powder is found to be a potassium-uranium hydrate, while the second powder is determined to be a mixture of uranium oxides primarily consisting of UO 3 .
Characterization of latent image of electron beam resist via critical-dimension resonant soft X-ray scattering
Metrology plays a crucial role in semiconductor manufacturing by providing accurate and precise measurement and characterization of critical parameters. With the development of high-resolution extreme ultraviolet lithography (EUVL) processes, critical dimensions are shrinking to sub-10 nm. Resist materials encounter the challenge of providing heightened sensitivity and a handle on exacerbating stochastic variations. A comprehensive understanding of the chemical profile of the latent image is pivotal for mitigating stochastic effects and optimizing pattern quality. However, the subtle differences in chemistry between the exposed and unexposed regions of the resists make it extremely challenging to characterize the latent images with sub-nanometer precision. Here, we develop the metrology with critical-dimension resonant soft X-ray scattering (CD-RSoXS) to probe the chemical profiles of latent images stored in resist after exposure. The combination of absorption spectroscopy and enhanced scattering contrast makes it possible to characterize the subtle structural and chemical variations in the latent image. Moreover, the results of the measurements are compared with the simulations with a finite element method–based Maxwell solver to extract a detailed profile of the latent and developed images. We demonstrate that the CD-RSoXS technique can provide valuable insights into the high spatial resolution and local chemical sensitivity simultaneously, which is crucial to understanding the resolution limits and stochastic effects in EUVL processes.
X-ray dichroism as a probe of orbital quenching and unquenching induced by optically excited Jahn-Teller modes
The use of soft-X-ray spectroscopy to probe changes in the ground-state due to vibronic excitations is studied. The changes in L-edge X-ray absorption on divalent cobalt in the presence of a vibrating Jahn-Teller distortion are calculated. For linear dichroism, a strong dependence on the distortion is obtained reflecting the change in the local quadrupole moment due to the changes in the xy versus yz/zx hole densities during the oscillation. Here, in the presence of a magnetic moment, significant variations in the circular dichroic signal are obtained related to the quenching and unquenching of the orbital angular momentum.
Surface structure of water from soft X-ray second harmonic generation
The microscopic structure of water’s surface is crucial to many natural and industrial processes, but studying its hydrogen bond (H-bond) network directly remains challenging due to the required interfacial sensitivity of experimental techniques. By leveraging advances in flat liquid sheet microjets and terawatt-scale attosecond soft X-ray pulses from the LCLS X-ray free electron laser, we employed soft X-ray second harmonic generation (SXSHG) spectroscopy to examine the liquid water/vapor interface. SXSHG combines the elemental selectivity of X-ray spectroscopies with the surface selectivity of SHG and gives access to the electronic structure of interfacial species. Here, we show the SXSHG spectrum differs from bulk water’s X-ray absorption, with its peak shifted several eV, indicating a vastly different electronic environment at the interface as compared to the bulk. First-principles electronic structure calculations show the signal is highly sensitive to H-bond interactions, such as water molecules accepting a single H-bond, which are surface abundant.
Soft X-ray Induced Radiation Damage in Dip-and-Pull Photon Absorption and Photoelectron Emission Experiments
Not Available
Soft x-ray spectroscopy of ammonium sulfate aerosols at varied pH conditions
Aqueous aerosols are useful model systems for understanding the physical chemistry that takes place in the Earth’s atmosphere, as well as the chemistry of other solar system objects. Ammonium sulfate aerosols are impacted by anthropogenic sources such as farming and shipping and are understood to be important seeds of cloud nucleation in the atmosphere, affecting climate. X-ray photoelectron spectroscopy and near edge x-ray absorption fine structure spectroscopy were used in tandem to probe the surface and bulk properties of aqueous (NH 4 ) 2 SO 4 , respectively. Aerosolized solutions of (NH 4 ) 2 SO 4 , some altered with NaOH to modify pH, were introduced via an aerodynamic lens to a velocity map imaging instrument for detection. The results show that as pH and sodium cation concentration increase, sulfate anion and ammonia become more prevalent at the surface, and the aerosol surface appears to become drier. However, most of the aerosol remains aqueous, with ion concentrations insensitive to the addition of NaOH. Density functional theory calculations were also performed to probe the coordination environment at the aerosol surfaces to understand the underlying phenomena. Finally, the changes seen on the surface of the aerosol underscore the importance of pH in regulating the structure and chemical properties of atmospherically relevant aerosols.
VerSoX B07-B: a high-throughput XPS and ambient pressure NEXAFS beamline at Diamond Light Source
The beamline optics and endstations at branch B of the Versatile Soft X-ray (VerSoX) beamline B07 at Diamond Light Source are described. B07-B provides medium-flux X-rays in the range 45-2200 eV from a bending magnet source, giving access to local electronic structure for atoms of all elements from Li to Y. It has an endstation for high-throughput X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine-structure (NEXAFS) measurements under ultrahigh-vacuum (UHV) conditions. B07-B has a second endstation dedicated to NEXAFS at pressures from UHV to ambient pressure (1 atm). The combination of these endstations permits studies of a wide range of interfaces and materials. The beamline and endstation designs are discussed in detail, as well as their performance and the commissioning process.
Probing the electronic properties of gap states near the surface of n -SrTiO 3-δ / i -Si (001) heterojunctions with high sensitivity
We have measured soft x-ray resonant photoemission for the n–SrTiO 3–δ /i–Si(001) (δ=~0.0003) hybrid semiconductor heterojunction with the goal of probing occupied electronic states in the band gap near the surface. By utilizing both swept energy, angle-integrated and fixed-energy, and angle-resolved spectroscopies, we identify the atomic and orbital character of the in-gap state as well as the different electronic phases that contribute to it. Specifically, we isolate the state associated with trapped charge on the n–SrTiO 3–δ surface that causes surface depletion from the localized gap state resulting from electron correlation effects in the complex oxide. Using an x-ray energy close to select dipole allowed TiL 3 → 3d x-ray absorption resonances results in a 40-fold increase in sensitivity. Furthermore, this feature makes photoemission possible when probing electrons from dopants at concentrations as low as a few hundredths of a percent.
Examples of X-Ray Characterization Techniques in Energy Storage Research
Lithium-ion batteries have revolutionized the portable electronics and transportation sectors. Their performance is often critically dependent on the crystal structures of the anode and cathode electrode materials, which must enable the transport and reversible storage of lithium ions into and out of the lattice. Because lithium is a low-Z element, characterization of materials for lithium-ion batteries can be particularly challenging. Regardless, X-ray techniques enable analysis of material structures to better understand how battery materials perform and degrade, particularly when combined with other materials characterization and electrochemical characterization techniques. While X-ray techniques are most often used in battery research for phase identification of crystal structures, X-ray characterization techniques are also used for a wide variety of other purposes. I will discuss several examples from my research with various collaborators on several projects that highlight the impact that X-ray characterization techniques can have on battery research. The first example will focus on low-temperature microwave-assisted solvothermal synthesis of vanadium-doped LiFePO4 cathode materials for lithium-ion batteries. (1,2) Through a combination of electrochemical and materials characterization, we determined that low temperature synthesis resulted in metastable phases that enabled incorporation of higher dopant levels than resulting from high-temperature synthesis of thermodynamically stable phases. Rietveld refinement of X-ray diffraction data enabled understanding of how lattice parameters changed with doping levels and synthesis temperature. X-ray absorption near edge spectroscopy enabled understanding of the vanadium and iron oxidation states to confirm how vacancies in the structure caused by doping were charge compensated. This was important to understand because the literature suggests doping can improve LiFePO4 electrical conductivity, which improves battery charge and discharge rates. The second example will focus on understanding residual strain in lithium metal anodes. Lithium-ion batteries typically use graphite anodes, but the charge-storage capacity can be theoretically improved ~10x by using lithium metal as the anode material instead. However, lithium anodes suffer from growth of high-aspect-ratio features, such as dendrites, that can pierce nanoporous polymer separators and lead to short circuits and fires. External pressure is commonly applied to cells to enable better morphological control. We hypothesized that applied pressure may promote strain and possibly work hardening during electrochemical cycling, which motivated us to look for evidence of residual strain in lithium metal cycled under applied pressure using X-ray diffraction and sin2(..psi..) analysis. We found that lithium electrodeposited under high pressure exhibited in-plane compressive strain and that that lithium electrodeposited under low pressure did not. (3) The residual strain that accompanies electrodeposition under high pressure may lead to work hardening, which may explain how a soft metal like lithium can puncture separators and why higher pressure does not always decrease short circuits. (4-6) References: 1) Harrison, K. L.; Manthiram, A. Microwave-Assisted Solvothermal Synthesis and Characterization of Metastable LiFe1- x (VO) x PO4 Cathodes. Inorganic chemistry 2011, 50(8), 3613-3620. 2) Harrison, K. L.; Bridges, C. A.; Paranthaman, M. P.; Segre, C. U.; Katsoudas, J.; Maroni, V. A.; Idrobo, J. C.; Goodenough, J. B.; Manthiram, A. Temperature Dependence of Aliovalent-Vanadium Doping in LiFePO4 Cathodes. Chemistry of Materials 2013, 25(5), 768-781. 3) Rodriguez, M. A.; Harrison, K. L.; Goriparti, S.; Griego, J. J.; Boyce, B. L.; Perdue, B. R. Use of a Be-Dome Holder for Texture and Strain Characterization of Li Metal Thin Films via Sin2 (..psi..) Methodology. Powder Diffraction 2020, 35(2), 89-97. 4) Jungjohann, K. L.; Gannon, R. N.; Goriparti, S.; Randolph, S. J.; Merrill, L. C.; Johnson, D. C.; Zavadil, K. R.; Harris, S. J.; Harrison, K. L. Cryogenic Laser Ablation Reveals Short-Circuit Mechanism in Lithium Metal Batteries. ACS Energy Letters 2021, 6(6), 2138-2144. 5) Harrison, K. L.; Merrill, L. C.; Long, D. M.; Randolph, S. J.; Goriparti, S.; Christian, J.; Warren, B.; Roberts, S. A.; Harris, S. J.; Perry, D. L. Cryogenic Electron Microscopy Reveals That Applied Pressure Promotes Short Circuits in Li Batteries. Iscience 2021, 24(12). 6) Harrison, K. L.; Goriparti, S.; Merrill, L. C.; Long, D. M.; Warren, B.; Roberts, S. A.; Perdue, B. R.; Casias, Z.; Cuillier, P.; Boyce, B. L. Effects of Applied Interfacial Pressure on Li-Metal Cycling Performance and Morphology in 4 M LiFSI in DME. ACS Applied Materials & Interfaces 2021, 13(27), 31668-31679.
Imaging the magnetic nanowire cross section and magnetic ordering within a suspended 3D artificial spin-ice
Artificial spin-ice systems are patterned arrays of magnetic nanoislands arranged into frustrated geometries and provide insight into the physics of ordering and emergence. The majority of these systems have been realized in two-dimensions, mainly due to the ease of fabrication, but with recent developments in advanced nanolithography, three-dimensional artificial spin ice (ASI) structures have become possible, providing a new paradigm in their study. Such artificially engineered 3D systems provide new opportunities in realizing tunable ground states, new domain wall topologies, monopole propagation, and advanced device concepts, such as magnetic racetrack memory. Direct imaging of 3DASI structures with magnetic force microscopy has thus far been key to probing the physics of these systems but is limited in both the depth of measurement and resolution, ultimately restricting measurement to the uppermost layers of the system. In this work, a method is developed to fabricate 3DASI lattices over an aperture using two-photon lithography, thermal evaporation, and oxygen plasma exposure, allowing the probe of element-specific structural and magnetic information using soft x-ray microscopy with x-ray magnetic circular dichroism (XMCD) as magnetic contrast. The suspended polymer–permalloy lattices are found to be stable under repeated soft x-ray exposure. Analysis of the x-ray absorption signal allows the complex cross section of the magnetic nanowires to be reconstructed and demonstrates a crescent-shaped geometry. Measurement of the XMCD images after the application of an in-plane field suggests a decrease in magnetic moment on the lattice surface due to oxidation, while a measurable signal is retained on sub-lattices below the surface.
Inverse Trans Influence and Uranium-Arene σ-Bonding Drive Molecular Geometry: Ligand Modification from Hard to Soft Flips the Oxide from Axial to Equatorial
A rare example of an equatorially bound terminal uranium(V) oxo complex in a chelating sulfur-based ligand environment, namely [(mes( Me,Ad ArS) 3 )U V (O eq )(THF)] (2), is presented. Octahedrally coordinated 2 is obtained by reaction of the mesitylene-anchored tris-thiophenolate-coordinated uranium(III) complex [U III ((SAr Ad,Me ) 3 mes)] (1) with the oxygen-atom transfer reagent N 2 O. The observed, equatorially bound oxo ligand in 2 is in stark contrast to its known tris-aryloxide analog, [(mes( Me,Ad ArO) 3 )U V (O ax )(THF)] (A), where the oxo ligand occupies the typically observed axial coordination site. Complexes 1 and 2 are characterized by single-crystal X-ray diffraction analyses and spectroscopic and magnetochemical methods, including 1 H NMR, UV/vis/NIR electronic absorption, as well as EPR spectroscopy and SQUID magnetometry, thus confirming the C S symmetry and the pentavalent oxidation state of 2. Encompassing quantum chemical calculations (DFT and CASPT2) on 2 and its tris-phenolate analog A, support and rationalize the structural and electronic differences. The molecular orbital pictures show that a stabilizing σ-bonding interaction arising from the U–O eq inverse trans influence (ITI) is present in 2 but missing in A. In 2, the sulfur 3p orbitals are closer in energy to the uranium 5f manifold than the arene π-system, leading to an ITI, while U–arene σ- or δ-bonding is not observed. Although the arene orbitals remain separated from the uranium 5f orbitals in A, the absence of an ITI allows the arene a 2u orbital to engage in a σ-type interaction with the metal. Thus, incorporating a tris-thiophenolate to an arene anchor introduces a new design concept in molecular f-element chemistry. This approach stabilizes an equatorially bound U(V) oxo center, contrasting with its tris-phenolate counterpart, where oxo coordination is axial. The observed geometric divergence, driven by competing ITI and U–arene interactions, not only tunes electronic structure but also leads to differentiated reactivity: only the phenolate analogs activate H 2 O, while the thiolates do not.
Characterizing sample degradation from synchrotron based X-ray measurements of ultra-thin exfoliated flakes
It is undeniable that novel 2D devices and heterostructures will have a lasting impact on the advancement of future technologies. However, the inherent instability of many exfoliated van der Waals (vdW) materials is a well-known hurdle yet to be overcome. Thus, the sustained interest in exfoliated vdW materials underscores the importance of understanding the mechanisms of sample degradation to establish proactive protective measures. Here, the impact of prolonged synchrotron-based X-ray beam exposure on exfoliated flakes of two contemporary vdW materials, NiPS 3 and α-RuCl 3 , is explored using resonant inelastic X-ray scattering (RIXS) and total fluorescence yield X-ray absorption spectroscopy (XAS). In NiPS 3 , the resulting RIXS and XAS spectra show a suppression, then vanishing, of NiS 6 multiplet excitations coupled with an upward shift of the peak energy of the XAS as a function of X-ray dose. In α-RuCl 3 , the signs of beam damage from the RIXS spectra are less evident. However, the post-experiment characterization of both materials using Raman spectroscopy exhibits signals of an amorphous and disordered system compared to pristine flakes; in addition, energy-dispersive X-ray spectroscopy of NiPS 3 shows evidence of ligand vacancies. As synchrotron radiation is fast becoming a required probe to study 2D vdW materials, these findings lay the groundwork for the development of future protective measures for synchrotron-based prolonged X-ray beam exposure, as well as for X-ray free electron laser.