Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “socio”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

The shared socio-economic pathway (SSP) greenhouse gas concentrations and their extensions to 2500

Anthropogenic increases in atmospheric greenhouse gas concentrations are the main driver of current and future climate change. The integrated assessment community has quantified anthropogenic emissions for the shared socio-economic pathway (SSP) scenarios, each of which represents a different future socio-economic projection and political environment. Here, we provide the greenhouse gas concentrations for these SSP scenarios using the reduced-complexity climate–carbon-cycle model MAGICC7.0. We extend historical, observationally based concentration data with SSP concentration projections from 2015 to 2500 for 43 greenhouse gases with monthly and latitudinal resolution. CO 2 concentrations by 2100 range from 393 to 1135 ppm for the lowest (SSP1-1.9) and highest (SSP5-8.5) emission scenarios, respectively. We also provide the concentration extensions beyond 2100 based on assumptions regarding the trajectories of fossil fuels and land use change emissions, net negative emissions, and the fraction of non-CO 2 emissions. By 2150, CO 2 concentrations in the lowest emission scenario are approximately 350 ppm and approximately plateau at that level until 2500, whereas the highest fossil-fuel-driven scenario projects CO 2 concentrations of 1737 ppm and reaches concentrations beyond 2000 ppm by 2250. We estimate that the share of CO 2 in the total radiative forcing contribution of all considered 43 long-lived greenhouse gases increases from 66% for the present day to roughly 68% to 85% by the time of maximum forcing in the 21st century. For this estimation, we updated simple radiative forcing parameterizations that reflect the Oslo Line-By-Line model results. In comparison to the representative concentration pathways (RCPs), the five main SSPs (SSP1-1.9, SSP1-2.6, SSP2-4.5, SSP3-7.0, and SSP5-8.5) are more evenly spaced and extend to lower 2100 radiative forcing and temperatures. Performing two pairs of six-member historical ensembles with CESM1.2.2, we estimate the effect on surface air temperatures of applying latitudinally and seasonally resolved GHG concentrations. We find that the ensemble differences in the March–April–May (MAM) season provide a regional warming in higher northern latitudes of up to 0.4 K over the historical period, latitudinally averaged of about 0.1 K, which we estimate to be comparable to the upper bound (~5 % level) of natural variability. In comparison to the comparatively straight line of the last 2000 years, the greenhouse gas concentrations since the onset of the industrial period and this studies' projections over the next 100 to 500 years unequivocally depict a “hockey-stick” upwards shape. The SSP concentration time series derived in this study provide a harmonized set of input assumptions for long-term climate science analysis; they also provide an indication of the wide set of futures that societal developments and policy implementations can lead to – ranging from multiple degrees of future warming on the one side to approximately 1.5°C warming on the other.

54 ENVIRONMENTAL SCIENCES↗

Socio-technical integration of the workplace

The objective of socio-technical theory and design is to provide the best match between the social system and the technical system. The achievement of a best match makes optimal use of the resources of both systems. Implementation of this theory is best served when there is involvement by the user organization. The involvement relative to the introduction of new technology in the organization is extremely significant. Employee involvement is critical to effective participative management. The trends toward participative management and employee involvement have taken various forms. These have included quality circles, semi-autonomous teams and adhoc action teams. It is noteworthy to point out, as these processes have evolved, the role of a facilitator has become more prevalent. The facilitation of the socio-technical design system in industrial engineering is described.

Carter, G. L.↗

Environmental and Socio-Demographic Determinants of Dengue Fever in Colombo City, Sri Lanka

Dengue fever has increased exponentially in Sri Lanka, from 24.4 cases per 100,000 in 2003 to 165.3 per 100,000 population in 2013. Although early warning systems using predictor models have been previously developed in other settings, it is important to develop such models in each local setting. Further, the ability of these models to be applicable at smaller geographic units will enhance current vector control and disease surveillance measures. The aim of this paper was to identify environmental and socio-economic status (SES) risk factors that may predict dengue fever at the Gram Niladhari Divisions (GND) level (smallest administrative unit) in Colombo city, Sri Lanka. These factors included landcover classes, amount of vegetation, population density, water access and neighborhood SES as determined by roof type. A geographically weighted regression (GWR) was used to develop the prediction model. A total 55 GND units covering an area of 37 sq km were investigated. We found that GND units with decreased vegetation, higher built-up area, higher population density and poor access to tap-water supply were associated with high risk of dengue; the pertinent GND units were concentrated in the center of the city. This is the first study in Sri Lanka to include both environmental and socio-demographic factors in prediction models for dengue fever. The methodology may be useful in enhancing ongoing dengue fever control measures in the country, and to be extended to other countries in the region that have an increasing incidence of dengue fever.

Tipre, Meghan↗

HFE in the design of the socio-technical system of the control room of a new generation reactor: issues faced during multistage validation - 126

This paper deals with the contribution of Human Factors and Ergonomics (HF and E) experts to the design of the control room (CR) of a new generation reactor (NGR), our view of the multistage validation (MSV) process and the issues faced during it. Our approach to MSV was to articulate two points of view: the designers' point of view (test and explore various design options) and the regulatory authorities' point of view (validate the performance of the socio-technical system of the CR). To perform this articulation, both tests and validation shared the same method and goals. The main issues faced during this process were to (1) get a coherent and integrated version of the full-scope simulator when the design of the socio-technical system of the CR was still in progress, (2) determine when to stop MSVs, and (3) define a criterion for the sampling of operational conditions. The first issue led us to the conclusion that specific project milestones synchronising the design of every part of the CR have to be planned early in the project in order to mitigate the risk of delaying WSTs (Whole System Tests). Regarding the second issue, we advocate that no further WSTs are required when the last modifications brought to the CR design have no significant impact on crews' activities. Finally, concerning the last issue, we think that performing WSTs in all classes of situations a crew may face during operating the plant is necessary. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Composite Socio-Technical Systems: A Method for Social Energy Systems

In order to model and study the interactions between social on technical systems, a systemic method, namely the composite socio-technical systems (CSTS), is proposed to incorporate social systems, technical systems and the interaction mechanism between them. A case study on University of Denver (DU) campus grid is presented in paper to demonstrate the application of the proposed method. In the case study, the social system, technical system, and the interaction mechanism are defined and modelled within the framework of CSTS. Distributed and centralized control and management schemes are investigated, respectively, and numerical results verifies the feasibility and performance of the proposed composite system method.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Situating Green Infrastructure in Context: A Framework for Adaptive Socio‐Hydrology in Cities

Abstract Management of urban hydrologic processes using green infrastructure (GI) has largely focused on storm water management. Thus, design and implementation of GI usually rely on physical site characteristics and local rainfall patterns, and do not typically account for human or social dimensions. This traditional approach leads to highly centralized storm water management in a disconnected urban landscape and can deemphasize additional benefits that GI offers, such as increased property value, greenspace aesthetics, heat island amelioration, carbon sequestration, and habitat for biodiversity. We propose the Framework for Adaptive Socio‐Hydrology (FrASH) in which GI planning and implementation moves from a purely hydrology‐driven perspective to an integrated sociohydrological approach. This allows for an iterative, multifaceted decision‐making process that would enable a network of stakeholders to collaboratively set a dynamic, context‐guided project plan for the installation of GI, rather than a “one‐size‐fits‐all” installation. We explain how different sectors (e.g., governance, nongovernmental organizations, communities, academia, and industry) can create a connected network of organizations that work toward a common goal. Through a graphical Chambered Nautilus model, FrASH is experimentally applied to contrasting GI case studies and shows that this multistakeholder, connected, decentralized network with a coevolving decision‐making project plan results in enhanced multifunctionality, potentially allowing for the management of resilience in urban systems at multiple scales.

Schifman, L. A.↗

Physical, socio-psychological, and behavioural determinants of household energy consumption in the UK

Determining which attitudes and behaviours predict household energy consumption can help accelerate the low-carbon energy transition. Conventional approaches in this domain are limited, often relying on survey methods that produce data on individuals’ motivations and self-reported activities without pairing these with actual energy consumption records, which are particularly hard to collect for large, nationally representative samples. This challenge precludes the development of empirical evidence on which attitudes and behaviours influence patterns of energy consumption, thus limiting the extent to which these can inform energy interventions or conservation programs. This study demonstrates a novel methodology for estimating energy consumption in the absence of actual energy records by using a large, publicly available data set of energy consumption in the UK. We develop a predictive model using the Smart Energy Research Laboratory (SERL) data portal (with records from nearly 13,000 UK households) and then use this model to predict energy consumption (both electric and gas) for a sample of 1,000 UK householders for which we separately collect over 200 variables relating to climate change attitudes and practices. Our approach uses a set of over 50 independent variables that are shared between the data sets, allowing us to train a model on the SERL data and use it to analyse the relationship between energy consumption and the opinions, motivations, and daily practices of survey respondents. Results show that electricity consumption is influenced by a broader range of factors compared to gas. Household energy use is best explained by physical dwelling characteristics, socio-demographic variables, and certain behavioural and attitudinal measures. Notably, pro-environmental attitudes, frugality, and conscientiousness correlate with lower energy use, while income and consumerism are linked to higher consumption. We discuss how these findings can inform efforts to decarbonise home energy use in the UK.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Use of significance thresholds to integrate cumulative effects into project-level socio-economic impact assessment in Canada

A longstanding critique of project-level environmental assessment is that it is weak at addressing cumulative effects, and because of this many argue that cumulative effects are best managed at a regional scale. However, in the absence of regional management it is important that project-level assessment supports cumulative effects management as best as possible. In this paper we present case study socio-economic impact assessments of liquefied natural gas development on Aboriginal groups on Canada's west coast. The case studies use an analytical structure modified from typical Canadian practice including unambiguous and non-arbitrary significance thresholds grounded in stakeholder values to focus baselines, impact assessment, and significance determination on cumulative effects. This approach is found to be more capable of informing decision-makers on cumulative effects as well as more rigorous and transparent than typical assessments. Much of this approach is not conceptually new, but at least in western Canada such an approach is not typically used or meaningfully implemented by practitioners. As such, the case studies serve to illustrate how practice can bolster project-level assessment. - Highlights: •Typical project assessment is weak with respect to cumulative effects. •Modified analysis structure and thresholds enable a focus on cumulative effects. •Clear, value-based thresholds make analysis rigorous, transparent, and democratic.

03 NATURAL GAS↗

Organochlorine pesticides and polychlorinated biphenyls in human adipose tissue from northern Tunisia: Current extent of contamination and contributions of socio-demographic characteristics and dietary habits

The aims of the present study were to investigate the current exposure levels of persistent organochlorine compounds (OCs) in adipose tissues intraoperatively collected from 40 patients over 20 years undergoing non-cancer-related surgery residing in Northern region of Tunisia (Bizerte), which constitutes an exemplary case, and examined association between levels of contamination and both socio-demographic characteristics and dietary habits. Concentration of hexachlorobenzene (HCB), hexachlorocyclohexane isomers (α-HCH, β-HCH, γ-HCH and δ-HCH), dichlorodiphenyltrichloroethane isomers (p,p′-DDT and o,p′-DDT) and metabolites (p,p′-DDE, o,p′-DDE, p,p′-DDD and o,p′-DDD) and 12 polychlorinated biphenyls (PCBs) congeners were measured using capillary gas chromatography with electron capture detector. Overall, residue levels of OCs followed the decreasing order of DDTs > PCBs > HCB > HCHs. DDTs levels ranged from 74.49 to 1834.76 ng g{sup −1} lipid and contributing to more than 90% to the sum of organochlorine pesticides (OCPs). p,p′-DDE was the most abundant in all samples and the p,p′-DDT/p,p′-DDE ratio (range between 1.85% and 58.45%) suggesting recent and ongoing exposure to banned commercial DDT products. PCB concentrations varied from 29.27 to 322.58 ng g{sup −1} lipid and PCB-180, PCB-153 and PCB-138 were the dominant congeners accounting for 70% of total PCBs. We did not find significant correlations between OC exposure levels and sex, parity, habitat areas and smoking habits. In females, the adipose tissue concentrations of DDTs, HCB and PCB-118 were positively correlated with age. There was statistically significant relationship between body mass index (BMI) changes and the adipose tissue levels of HCB and HCHs. No association was found between OCPs levels and dietary factors. However, our study suggests that fish consumption may be an important contributor of PCBs adipose tissue content of PCBs in Tunisian people. The presented work is highly significant, being the first study pointing out the chronic exposure to OCs in Bizerte. - Highlights: • First study to report HCB, HCHs, DDTs and PCBs in adipose tissues from Tunisia. • The measurement levels showed a general pattern as DDTs>PCBs> HCB>HCHs. • p,p′-DDE and PCB-180, PCB-153 and PCB-138 were the marker substances of OCPs and PCBs, respectively. • Strong associations between concentrations of OCPs and PCBs suggest Tunisian are exposed via similar routes. • Fish consumption is a major source of dietary exposure to PCBs.

54 ENVIRONMENTAL SCIENCES↗

The Shared Socio-economic Pathways: Trajectories for human development and global environmental change

This Special Issue presents the Shared Socio-economic Pathways (SSPs), a set of 5 storylines on possible trajectories for human development and global environmental change during the 21st century. The information presented in the Special Issue has been developed over the last few years as a joint community effort and includes both qualitative narratives and results of quantitative model analysis. The SSPs form part of a larger set of community scenarios for analysis of climate change. Such community scenarios form a key tool for analysis of analysis of global environmental change and sustainable development problems. They allow exploration of different futures with and without response strategies. They also form a key tool to link across different disciplines and scales. They allow the same scenarios to be used in research on driving forces of climate change, the physical climate system, climate impacts and adaptation and mitigation strategies. Such scenarios can also link research across different research areas (e.g. climate change and biodiversity analysis) or be used across different scales (global, regional and local scales). Finally, they also have a key function as a consistent data source (population projections, climate projections and insights into land and energy development, for instance).

Van Vuuren, Detlef↗

Power Law Growth and Delayed Feedbacks in Socio-Hydrological Systems

Water infrastructure dynamics result from coupled social and physical hydrological processes embedded in “socio-hydrological systems” (SHSs). Freshwater fuels socioeconomic activity, which in turn exerts pressure on water resources through increased water demand and water quality degradation. Many factors emphasize the need for quantitative tools to predict the future of these systems, including SHS failures due to growing water scarcity from population growth and climate change. However, unfolding the interactions between social and hydrological factors continues to resist theoretical treatment, impeding progress toward a predictive framework. To resolve this issue, we propose and evaluate time delays as surrogates for the social dynamics in SHS models. This approach permits the development of models that describe SHS dynamics in terms of observable, physical, hydrological state variables. We apply this approach to two case studies: (a) reservoir storage capacity growth in the world and the U.S. Water Resources Regions and (b) global water withdrawals. Substantial variability was identified in empirical estimates of growth rates and time delays. Reservoir construction typically follows a saturating, logistic curve with periodic, punctuated equilibria, separated by delays ranging from 5 to 20 years both globally and regionally. In contrast, global water withdrawal data display faster-than-exponential growth, characteristic of a positive feedback through which water use drives further water development. Historical analysis suggests that growth trends in water resources systems are superimposed by recurring periods of innovation and inactivity which are indicative of slow memory dissipation and delayed effects of past water use on current water infrastructure decisions.

54 ENVIRONMENTAL SCIENCES↗

Representing Socio‐Economic Uncertainty in Human System Models

Abstract Socio‐economic development pathways and their implications for the environment are highly uncertain, and energy transitions will involve complex interactions among sectors. Here, traditional Monte Carlo analysis is paired with scenario discovery techniques to provide a richer portrait of these complexities. Modeled uncertain input variables include costs of advanced energy technologies, energy efficiency trends, fossil fuel resource availability, elasticities of substitution for labor, capital, and energy across economic sectors, population growth, and labor and capital productivity. The sampled values are simulated through a multi‐sector, multi‐region, recursively dynamic model of the world economy to explore a range of possible future outcomes. We find that many patterns of energy and technology development are possible for various long‐term environmental pathways and that sectoral output for most sectors is little affected through 2050 by the long‐term temperature target, but with tight constraints on emissions, emission intensities must fall much more rapidly. Scenario discovery techniques are applied to the large uncertainty ensembles to explore if there are prevailing storylines behind outcomes of interest. An illustrative investigation focused on different levels of economic growth shows many combinations of pathways and no single storyline emerging for a given economic outcome. This method can be extended to other outcomes of interest, exploring the nature of scenarios with both tail and median outcomes. Sampling from a Monte Carlo generated ensemble provides a rich set of scenarios to investigate, and potentially aids in avoiding heuristic biases in less structured scenario approaches.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A Data Processing Pipeline To Extract A Knowledge Graph From Heterogeneous Data For Socio-technical Analysis Of Critical Infrastructure Influence

The code is written in Python and consists of the following pipeline that is implemented in Apache Airflow. This pipeline intends to understand the companies that are directly or indirectly involved with a type of critical infrastructure system at some point in that system's lifecycle. The pipeline takes a configuration file that specifies a list of initial companies to consider, a geographic region of interest, and a set of SEC form types as well as other data sources (e.g. CrunchBase) from which to extract entities and relations. There are four main components to this pipeline as currently implemented: Entity Extraction, Network Construction, Analysis, and Visualization. First, Entity Extraction, is implemented as the `topear-extract_organizations` Apache Airflow workflow. Given an initial query that specifies a geographic region of interest and a time interval, the software will extract CI facilities of interest and organizations that have a direct influence relationship to those facilities (e.g. ownership). During the course of the LDRD, we focused on Electric Vehicle charging stations and this information is available via the Department of Energy (DOE) database on fueling stations maintained by NREL. Within the context of the DOE CESER project, we have focused on Battery Energy Storage Systems (BESS). Second, the Network Extraction component will iteratively construct a social network graph given the set of organizations and people extracted in the previous step. Organizations (and eventually People if desired) are then fed as a query to the `topgear-construct_social_network` Apache Airflow workflow which given a set of initial companies and data sets (e.g. SEC EDGAR form types, OpenCorporates, Crunchbase). This Airflow workflow will iteratively query such data sources to discover relationships with new organizations and people. For example, this module can iteratively query SEC EDGAR for metadata that documents the number of each type of form for the given set of companies and their location. This forms metadata represents a catalog of data sources from SEC EDGAR for the extracted social network knowledge graph. The pipeline then downloads these forms from the website and saves them in a build directory for further processing. These documents are then parsed for entities and relations. Again, we note that in additional to SEC data sources, this step can also pull in information on organizations via API services such as CrunchBase and OpenCorporates or bulk data sources. At the end of this step, the resultant social network, the Critical Infrastructure network, and the edges that encode relationships between organizations and CI facilities, form the Adversarial Socio-Technical Network (ASTN) that informs the analysis. Third, the Analysis component processes these generated ASTN. Previously, that has included the ability to compare prevalence of different vendors for a given infrastructure component type across different regions as well as identify common public and private investors across those vendors. This was demonstrated for EV Charging Stations across several different metropolitan areas within an IEEE PES GridEdge publication. More recently, we have looked at ways to identify infrastructure owners and operators of BESS with the most nameplate capacity across different states as well as other indictors of risk resulting from changes in ownership over time. Finally, the Visualization component consists of an HTML/CSS/JS framework by which users can interact geospatial, operational, and organizational relationships across a given portfolio of Critical Infrastructure facilities. The objective is to provide a library of UI/UX modules that can be repurposed for stakeholder-specific dashboards. All of the modules are related via a common event model that enables UI actions in one view to percolate across the other views.

Weaver, Gabriel [Idaho National Laboratory (INL), ↗

Produced Water-Economic, Socio, Environmental Simulation Model (PW-ESEim) Model: Proof-of-Concept for Southeastern New Mexico

A proof-of-concept tool, the Produced Water-Economic, Socio, Environmental Simulation model (PW-ESESim), was developed to support ease of analysis. The tool was designed to facilitate head-to-head comparison of alternative produced water source, treatment, and reuse water management strategies. A graphical user interface (GUI) guides the user through the selection and design of alternative produced water treatment and reuse strategies and the associated health and safety risk and economic benefits. At the highest conceptual level, alternative water strategies include the selection of a source water (locally or regionally available produced water), treatment strategy (pre-treatment, physical, chemical, biological, desalination, and post-treatment processes) and product water purpose (e.g., irrigation, industrial processing, environmental). After selection of these details, the PW-ESESim output a number of key economic, societal, environmental, public/ecological health and safety metrics to support user decision-making; specific examples include, cost of treatment, improvements in freshwater availability, human and ecologic health impacts and growth in local jobs and the economy. Through the simulation of different produced water treatment and management strategies, tradeoffs are identified and used to inform fit-for-purpose produced water treatment and reuse management decisions. While the tool was initially designed using Southeastern New Mexico (Permian Basin) as a case study, the general design of the PW-ESESim model can be extended to support other oil and gas regions of the U.S.

54 ENVIRONMENTAL SCIENCES↗

Allometric Trophic Networks From Individuals to Socio-Ecosystems: Consumer–Resource Theory of the Ecological Elephant in the Room

A well-known parable is that of the blind men studying an elephant each of which assert the elephant is the part they first hold in their hands, e.g., “rope!” says the tail holder while the leg holder asserts “tree!” The various subdisciplines of ecology appear similar in that we each engage in our enthusiastic but at least somewhat myopic study with remarkably limited agreement or even discussion about the overall system which we all study. Allometric trophic network (ATN) theory offers a path out of this dilemma by integrating across scales, taxa, habitats and organizational levels from physiology to ecosystems based on consumer-resource interactions among co-existing organisms. The network architecture and the metabolic and behavioral processes that determine the structure and dynamics of these interactions form the first principles of ATN theory, which in turn provides a synthetic overview and powerfully predictive framework for ecology from organisms to ecosystems. Beyond ecology, ATN theory also synthesizes eco-evolutionary and socio-ecological research still largely based on consumer-resource mechanisms but respectively integrated with different processes including natural selection and market mechanisms. This paper briefly describes foundations, advances, and future directions of ATN theory including predicting an ecosystem’s phenotype from its community’s genotype in order to accelerate more predictive and unified understanding of the complex systems studied by ecologists and other environmental scientists.

54 ENVIRONMENTAL SCIENCES↗

The Role of Communications, Socio-Psychological, and Personality Factors in the Maintenance of Crew Coordination

There is increasing evidence that many air transport incidents and accidents are the result of the improper or inadequate utilization of the resources accessible to flight dock crew members. These resources obviously include the hardware and technical information necessary for the safe and efficient conduct of the flight, but they also Include the human resources which must be coordinated effectively. The focus of this paper is upon the human resources, and how communication styles, socio-psychological factors, and personality characteristics can affect crew coordination.

Foushee, H. Clayton↗

A Human View Model for Socio-Technical Interactions

The Human View was developed as an additional architectural viewpoint to focus on the human part of a system. The Human View can be used to collect and organize data in order to understand how human operators interact and impact the other elements of a system. This framework can also be used to develop a model to describe how humans interact with each other in network enabled systems. These socio-technical interactions form the foundation of the emerging area of Human Interoperability. Human Interoperability strives to understand the relationships required between human operators that impact collaboration across networked environments, including the effect of belonging to different organizations. By applying organizational relationship concepts from network theory to the Human View elements, and aligning these relationships with a model developed to identify layers of coalition interoperability, the conditions for different levels for Human Interoperability for network enabled systems can be identified. These requirements can then be captured in the Human View products to improve the overall network enabled system.

Handley, Holly A.↗