Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shock dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

The Dynamics of Shock Dispersion and Interactions in Supersonic Freestreams with Counterflowing Jets

An active flow control concept using counterflowing jets to significantly modify the external flowfields and strongly weaken or disperse the shock-waves of supersonic and hypersonic vehicles to reduce the aerothermal loads and wave drag was investigated. Experiments were conducted in a trisonic blow-down wind-tunnel, complemented by pre-test computational fluid dynamics (CFD) analysis of a 2.6% scale model of Apollo capsule, with and without counterflowing jets, in Mach 3.48 and 4.0 freestreams, to assess the potential aerothermal and aerodynamic benefits of this concept. The model was instrumented with heat flux gauges, thermocouples and pressure taps, and employed five counterflowing jet nozzles (three sonic and other two supersonic with design Mach numbers of 2.44 and 2.94) and nozzle exit diameters ranging from 0.25 to 0.5 inch. Schlieren data show that at low jet flow rates of 0.05 and 0.1lb(sub m)/sec, the interactions result in a long penetration mode (LPM) jet, while the short penetration mode (SPM) jet is observed at flow rates greater than 0.1 lb(sub m)/sec., consistent with the pre-test CFD predictions. For the LPM, the jet appears to be nearly fully-expanded, resulting in a very unsteady and oscillatory flow structure in which the bow shock becomes highly dispersed such that it is no longer discernable. Higher speed camera Schlieren data reveal the shock to be dispersed into striations of compression waves, which suddenly coalesce to a weaker bow shock with a larger standoff distance as the flow rate reached a critical value. The pronounced shock dispersion could significantly impact the aerodynamic performance (L/D) and heat flux reduction of spacecraft in atmospheric entry and re-entry, and could also attenuate the entropy layer in hypersonic blunt body flows. For heat transfer, the results show significant reduction in heat flux, even giving negative heat flux for some of the SPM interactions, indicating that the flow wetting the model is cooling, instead of heating the model, which could significantly impact the requirements and design of thermal protection system. These findings strongly suggest that the application of counterflowing jets as active flow control could have strong impact on supersonic and hypersonic vehicle design and performance.

Daso, Endwell O.↗
NASA NTRS1994

Motion of the heliospheric termination shock 3: Incident interplanetary shocks

In this paper the response of the heliospheric termination shock to an incident interplanetary shock is examined. This paper is an extension of a recent study by Barnes (1993), which treated the analogous problem for an incident contact discontinuity. The termination shock is treated as a strong gas-dynamic shock. The post-interaction configuration consists of a moving termination shock, a postshock contact discontinuity, and either a shock or rarefaction wave propagating the disturbance signal into the downstream medium. For a decrease in dynamic pressure a rarefaction wave propagates downstream, and the new termination shock propagates inward, while, for an enhancement of dynamic pressure, the termination shock moves outwards and a weak outer shock propagates into the downstream medium; speeds of motion of the termination shock are typically of the order of approximately 100 km/s. The results are similar to those presented by Barnes (1993) indicating that the results of that paper are robust within the gas-dynamic model, in the sense of being independent of the details of the initial disturbance.

Naidu, Kamcilla↗
NASA NTRS2021

Oblique High Mach Number Heliospheric Shocks: The Role of α Particles

Spacecraft observations of heliospheric shocks often find oscillations in the magnetic field and density both, upstream and downstream. The downstream magnetic oscillations of oblique collisionless shocks were detected by Wind with 10.9 samples/s and DSCOVR spacecraft with high temporal resolution of 50 samples/s. The density oscillations associated with the shocks are also evident in proton and α particle density by Wind (with much lower temporal resolution). Recently, we have investigated low Mach number low-β oblique shock oscillations using satellite data and 2.5D hybrid modeling with electrons modeled as fluid and ions modeled as particles and found that α particles—an important component of heliospheric plasma—may affect considerably the downstream oscillations and the shock structure. The objective of the present study is to investigate the effects of α particles on high Mach number heliospheric shocks dynamics, oscillations, nonstationarity, and shock-front rippling. We extend the study to high Mach number shocks (M > 3), investigate several α particle typical densities, and compare the results for the various shock parameters. We model the effects of α particles on the shock ramp, wake, and downstream oscillation structure and the kinetic properties of proton and α particle velocity distributions at various locations downstream of the shocks. Using the 2.5D hybrid model we found that the modeled high Mach number quasi-perpendicular shock magnetic and density structures are significantly affected by α particles with typical solar wind relative abundances, suggesting that the observed high Mach number shocks are similarly affected by α particles.

Leon Ofman↗
NASA NTRS1992

Computer simulations of comet- and asteroidlike bodies passing through the Venusian atmosphere: Preliminary results on atmospheric and ground shock effects

We have completed computer simulations that model shock effects in the venusian atmosphere caused during the passage of two cometlike bodies 100 m and 1000 m in diameter and an asteroidlike body 10 km in diameter. Our objective is to examine hypervelocity-generated shock effects in the venusian atmosphere for bodies of different types and sizes in order to understand the following: (1) their deceleration and depth of penetration through the atmosphere; and (2) the onset of possible ground-surface shock effects such as splotches, craters, and ejecta formations. The three bodies were chosen to include both a range of general conditions applicable to Venus as well as three specific cases of current interest. These calculations use a new multiphase computer code (DICE-MAZ) designed by California Research & Technology for shock-dynamics simulations in complex environments. The code was tested and calibrated in large-scale explosion, cratering, and ejecta research. It treats a wide range of different multiphase conditions, including material types (vapor, melt, solid), particle-size distributions, and shock-induced dynamic changes in velocities, pressures, temperatures (internal energies), densities, and other related parameters, all of which were recorded in our calculations.

Roddy, D.↗
NASA NTRS2005

The Planetesimal Bow Shock Model for Chondrule Formation: More Detailed Simulations in the Near Vicinity of the Planetesimal

Gas dynamic shock waves in a low temperature nebula have been considered to be a leading candidate mechanism for providing the repetitive, short-duration heating events that are believed to have been responsible for the formation of chondrules in chondrites. It has been found, for example, that shocks with Mach numbers greater than 4 or 5 would be capable of rapidly melting 0.1-1 mm sized silicate particles as required by meteoritic data. Near the nebula midplane where chondrite parent bodies are believed to have formed, possible energy sources for generating multiple shocks include mass concentrations in a gravitationally unstable nebula, tidal interactions of proto-Jupiter with the nebula, and bow waves upstream of planetesimals scattered gravitationally into eccentric orbits by proto- Jupiter. In a recent study, we have found that chondrule precursors that are melted following passage through a planetesimal bow shock would likely cool at rates that are too rapid to be consistent with meteoritic evidence. However, that study was limited to the bowshock exterior to about 1.5 planetesimal radii (measured perpendicular to the symmetry axis) to avoid complications interior to this distance where large pressure gradients and lateral flow occur as the gas flows around the planetesimal. In this paper, we reconsider the planetesimal bow shock model and report more detailed numerical simulations of chondrule precursor heating, cooling, and dynamical histories in the near vicinity of a representative planetesimal.

Hood, Lon L.↗
NASA NTRS2011

Underexpanded Supersonic Plume Surface Interactions: Applications for Spacecraft Landings on Planetary Bodies

Numerical and experimental investigations of both far-field and near-field supersonic steady jet interactions with a flat surface at various atmospheric pressures are presented in this paper. These studies were done in assessing the landing hazards of both the NASA Mars Science Laboratory and Phoenix Mars spacecrafts. Temporal and spatial ground pressure measurements in conjunction with numerical solutions at altitudes of approx.35 nozzle exit diameters and jet expansion ratios (e) between 0.02 and 100 are used. Data from steady nitrogen jets are compared to both pulsed jets and rocket exhaust plumes at Mach approx.5. Due to engine cycling, overpressures and the plate shock dynamics are different between pulsed and steady supersonic impinging jets. In contrast to highly over-expanded (e <1) and underexpanded exhaust plumes, results show that there is a relative ground pressure load maximum for moderately underexpanded (e approx.2-5) jets which demonstrate a long collimated plume shock structure. For plumes with e much >5 (lunar atmospheric regime), the ground pressure is minimal due to the development of a highly expansive shock structure. We show this is dependent on the stability of the plate shock, the length of the supersonic core and plume decay due to shear layer instability which are all a function of the jet expansion ratio. Asymmetry and large gradients in the spatial ground pressure profile and large transient overpressures are predominantly linked to the dynamics of the plate shock. More importantly, this study shows that thruster plumes exhausting into martian environments possess the largest surface pressure loads and can occur at high spacecraft altitudes in contrast to the jet interactions at terrestrial and lunar atmospheres. Theoretical and analytical results also show that subscale supersonic cold gas jets adequately simulate the flow field and loads due to rocket plume impingement provided important scaling parameters are in agreement. These studies indicate the critical importance of testing and modeling plume-surface interactions for descent and ascent of spacecraft and launch vehicles.

Mehta, M.↗
NASA NTRS1977

Report of the panel on theoretical aerodynamics

Requirements for flow quality in the National Transonic Facility are explored. Viscous flow effects of concern to theoreticians are discussed. Experiments outlined for theory validation in the facility include validating high aspect ratio wing-body combination; low aspect ratio moderately swept wing; low aspect ratio highly swept wing; high lift systems on high aspect ration wings; Reynolds number scaling; dynamic shock- boundary layer interaction; and the effect of R and M on dynamic stall.

Bobbitt, P. J.↗
NASA NTRSDate not supplied

TPSAS-NF1676L-31264-DND

Nonlinear unsteady aerodynamic models (TSD, Euler/Navier-Stokes (RANS), LES) are complex, expensive solutions. CFD used by industry mostly for steady/static loads cases. Limit Cycle Oscillation (LCO) is an equilibrium point of the nonlinear aeroelastic system induced by nonlinear unsteady aerodynamics (shock dynamics, separated flow) and/or nonlinear structural dynamics (geometric and material nonlinearities). While Euler solutions can generate LCOs, viscosity yields improved accuracy (shock strength, position). Most common aeroelastic CFD codes currently consist of nonlinear unsteady aerodynamics with linear structural dynamics. Van der Pol system is a simple example of LCOs.

Walter A Silva↗
NASA NTRS1993

Gas-grain energy transfer in solar nebula shock waves: Implications for the origin of chondrules

Meteoritic chondrules provide evidence for the occurrence of rapid transient heating events in the protoplanetary nebula. Astronomical evidence suggests that gas dynamic shock waves are likely to be excited in protostellar accretion disks by processes such as protosolar mass ejections, nonaxisymmetric structures in an evolving disk, and impact on the nebula surface of infalling 'clumps' of circumstellar gas. Previous detailed calculations of gas-grain energy and momentum transfer have supported the possibility that such shock waves could have melted pre-existing chondrule-sized grains. The main requirement for grains to reach melting temperatures in shock waves with plausibly low Mach numbers is that grains existed in dust-rich zones (optical depth greater than 1) where radiative cooling of a given grain can be nearly balanced by radiation from surrounding grains. Localized dust-rich zones also provide a means of explaining the apparent small spatial scale of heating events. For example, the scale size of at least some optically thick dust-rich zones must have been relatively small (less than 10 kilometers) to be consistent with petrologic evidence for accretion of hot material onto cold chondrules. The implied number density of mm-sized grains for these zones would be greater than 30 m(exp -3). In this paper, we make several improvements of our earlier calculations to include radiation self-consistently in the shock jump conditions, and we include heating of grains due to radiation from the shocked gas. In addition, we estimate the importance of momentum feedback of dust concentrations onto the shocked gas which would tend to reduce the efficiency of gas dynamic heating of grains in the center of the dust cloud.

Hood, L. L.↗
NASA NTRS1994

A Supersonic Tunnel for Laser and Flow-Seeding Techniques

A supersonic wind tunnel with flow conditions of 3 lbm/s (1.5 kg/s) at a free-stream Mach number of 2.5 was designed and tested to provide an arena for future development work on laser measurement and flow-seeding techniques. The hybrid supersonic nozzle design that was used incorporated the rapid expansion method of propulsive nozzles while it maintained the uniform, disturbance-free flow required in supersonic wind tunnels. A viscous analysis was performed on the tunnel to determine the boundary layer growth characteristics along the flowpath. Appropriate corrections were then made to the contour of the nozzle. Axial pressure distributions were measured and Mach number distributions were calculated based on three independent data reduction methods. A complete uncertainty analysis was performed on the precision error of each method. Complex shock-wave patterns were generated in the flow field by wedges mounted near the roof and floor of the tunnel. The most stable shock structure was determined experimentally by the use of a focusing schlieren system and a novel, laser based dynamic shock position sensor. Three potential measurement regions for future laser and flow-seeding studies were created in the shock structure: deceleration through an oblique shock wave of 50 degrees, strong deceleration through a normal shock wave, and acceleration through a supersonic expansion fan containing 25 degrees of flow turning.

Bruckner, Robert J.↗
NASA NTRS2008

Experimental Plans for Subsystems of a Shock Wave Driven Gas Core Reactor

This Contractor Report proposes a number of plans for experiments on subsystems of a shock wave driven pulsed magnetic induction gas core reactor (PMI-GCR, or PMD-GCR pulsed magnet driven gas core reactor). Computer models of shock generation and collision in a large-scale PMI-GCR shock tube have been performed. Based upon the simulation results a number of issues arose that can only be addressed adequately by capturing experimental data on high pressure (approx.1 atmosphere or greater) partial plasma shock wave effects in large bore shock tubes ( 10 cm radius). There are three main subsystems that are of immediate interest (for appraisal of the concept viability). These are (1) the shock generation in a high pressure gas using either a plasma thruster or pulsed high magnetic field, (2) collision of MHD or gas dynamic shocks, their interaction time, and collision pile-up region thickness, and (3) magnetic flux compression power generation (not included here).

Kazeminezhad, F.↗
NASA NTRS1977

Design of high pressure oxygen filter for extravehicular activity life support system, volume 1

The experience of the National Aeronautics and Space Administration (NASA) with extravehicular activity life support emergency oxygen supply subsystems has shown a large number of problems associated with particulate contamination. These problems have resulted in failures of high pressure oxygen component sealing surfaces. A high pressure oxygen filter was designed which would (a) control the particulate contamination level in the oxygen system to a five-micron glass bead rating, ten-micron absolute condition (b) withstand the dynamic shock condition resulting from the sudden opening of 8000 psi oxygen system shutoff valve. Results of the following program tasks are reported: (1) contaminant source identification tests, (2) dynamic system tests, (3) high pressure oxygen filter concept evaluation, (4) design, (5) fabrication, (6) test, and (7) application demonstration.

Wilson, B. A.↗
NASA NTRS1993

Motion of the heliospheric termination shock - A gas dynamic model

A simple quantitative model is presented for the heliospheric termination shock's anticipated movement in response to upstream solar wind condition variations, under the assumption that the termination shock is initially a strong gasdynamic shock that is at rest relative to the sun, and that there is a discontinuous increase or decrease in the dynamical pressure upstream of the shock. The model suggests that the termination shock is constantly in motion, and that the mean position of the shock lies near the mean equilibrium position which corresponds to the balance between the mean solar wind dynamical pressure and the mean interstellar pressure.

Barnes, Aaron↗
NASA NTRS1986

Mg II emission from shock waves in Mira variables

In order to investigate the atmospheric shock dynamics of Miras, a program to monitor the ultraviolet Mg II flux, the visual magnitude (using the IUE FES-magnitude) and whenever possible the hydrogen Balmer emission for several Miras was initiated. Results suggest that it should be possible to derive the density structure of the atmosphere and hence estimate quite accurately the kinetic energy input into the stellar atmosphere. The atmospheric shock models suggest that at phase equal 1.0 most of the energy which enters the region where the shock is located ends up in the wind. This is after the strongest Mg II emission is seen. From an observed velocity at infinity and an estimate of the energy input derived from the Mg II flux, it will be possible to determine the mass loss rate for these objects.

Brugel, Edward W.↗
NASA NTRS2002

A New Forced Oscillation Capability for the Transonic Dynamics Tunnel

A new forced oscillation system has been installed and tested at NASA Langley Research Center's Transonic Dynamics Tunnel (TDT). The system is known as the Oscillating Turntable (OTT) and has been designed for the purpose of oscillating, large semispan models in pitch at frequencies up to 40 Hz to acquire high-quality unsteady pressure and loads data. Precisely controlled motions of a wind-tunnel model on the OTT can yield unsteady aerodynamic phenomena associated with flutter, limit cycle oscillations, shock dynamics, and non-linear aerodynamic effects on many vehicle configurations. This paper will discuss general design and components of the OTT and will present test data from performance testing and from research tests on two rigid semispan wind-tunnel models. The research tests were designed to challenge the OTT over a wide range of operating conditions while acquiring unsteady pressure data on a small rectangular supercritical wing and a large supersonic transport wing. These results will be presented to illustrate the performance capabilities, consistency of oscillations, and usefulness of the OTT as a research tool.

Piatak, David J.↗
NASA NTRS2013

Hybrid Large-Eddy/Reynolds-Averaged Simulation of a Supersonic Cavity Using VULCAN

Simulations of a supersonic recessed-cavity flow are performed using a hybrid large-eddy/Reynolds-averaged simulation approach utilizing an inflow turbulence recycling procedure and hybridized inviscid flux scheme. Calorically perfect air enters a three-dimensional domain at a free stream Mach number of 2.92. Simulations are performed to assess grid sensitivity of the solution, efficacy of the turbulence recycling, and the effect of the shock sensor used with the hybridized inviscid flux scheme. Analysis of the turbulent boundary layer upstream of the rearward-facing step for each case indicates excellent agreement with theoretical predictions. Mean velocity and pressure results are compared to Reynolds-averaged simulations and experimental data for each case and indicate good agreement on the finest grid. Simulations are repeated on a coarsened grid, and results indicate strong grid density sensitivity. Simulations are performed with and without inflow turbulence recycling on the coarse grid to isolate the effect of the recycling procedure, which is demonstrably critical to capturing the relevant shear layer dynamics. Shock sensor formulations of Ducros and Larsson are found to predict mean flow statistics equally well.

Quinlan, Jesse↗