Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “seismic source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Faulting parameters derived from computer simulation of earthquakes

Seismic source parameters, average displacement, rupture length, and strain energy release are investigated by computer simulation using a coupled massive block model of the sliding along an active fault. Average displacements and energy release vary considerably with the degree of heterogeneity in the friction and elastic parameters used in the model. Strain energy release is determined primarily by the product of dynamic friction, rupture length, and average displacement. Interrelationships among the faulting parameters are consistent with theoretical arguments and experimental data. The variation in the frequency of occurrence of simulation events with strain energy release is different from the variation in the frequency of naturally occurring events with seismic energy.

Cohen, S. C.↗

Geologic controls on the West Antarctic Ice Sheet

The stability of the West Antarctic Ice Sheet is intertwined with its geologic history. The sub-ice geology and the possibility of active rifting and associated elevated heat-flux and volcanism might be determining factors in ice-sheet behavior. Seismic monitoring of natural events at the base of Ice Stream C reveals the presence of a young sedimentary basin beneath the ice stream. The sediments are presumed to be of glacio-marine origin, similar to those beneath Ice Stream B and in the Ross Sea. The young sediments are approximately 1/2 km thick at UpC camp, but thin abruptly southward to 100 m or less. We hypothesize the presence of a fault with a throw of 400 m to account for this (though we have not directly detected the fault), rather than invoking unrealistic basement dips. To extend these studies to critical inland regions, we suggest an expanded explosive-source seismic survey of the Byrd Subglacial Basin to determine the extent and character of the hypothesized rift basin. High-resolution seismic monitoring will detect layering in the sedimentary column, as well as possibly imaging faults directly.

Anandakrishnan, Sridhar↗

GPS detection of ionospheric perturbations following the January 17, 1994, northridge earthquake

Sources such as atmospheric or buried explosions and shallow earthquakes producing strong vertical ground displacements produce pressure waves that propagate at infrasonic speeds in the atmosphere. At ionospheric altitudes low frequency acoustic waves are coupled to ionispheric gravity waves and induce variations in the ionoispheric electron density. Global Positioning System (GPS) data recorded in Southern California were used to compute ionospheric electron content time series for several days preceding and following the January 17, 1994, M(sub w) = 6.7 Northridge earthquake. An anomalous signal beginning several minutes after the earthquake with time delays that increase with distance from the epicenter was observed. The signal frequency and phase velocity are consistent with results from numerical models of atmospheric-ionospheric acoustic-gravity waves excited by seismic sources as well as previous electromagnetic sounding results. It is believed that these perturbations are caused by the ionospheric response to the strong ground displacement associated with the Northridge earthquake.

Calais, Eric↗

Waveform effects of a metastable olivine tongue in subducting slabs

Velocity models of subducting slabs with a kinetically-depressed olivine to beta- and gamma-spinel transition are constructed, and the effect that such structures would have on teleseismic P waveforms are examined using a full-wave finite-difference method. These 2D calculations yielded waveforms at a range of distances in the downdip direction. The slab models included a wedge-shaped, low-velocity metastable olivine tongue (MOTO) to a depth of 670 km, as well as a plausible thermal anomaly; one model further included a 10-km-thick fast layer on the surface of the slab. The principal effect of MOTO is to produce grazing reflections at wide angles off the phase boundary, generating a secondary arrival 0 to 4 seconds after the initial arrival depending on the take-off angle. The amplitude and timing of this feature vary with the lateral location of the seismic source within the slab cross-section.

Vidale, John E.↗

Using a Genetic Algorithm to Model Broadband Regional Waveforms for Crustal Structure in the Western United States

In this study, we analyze regional seismograms to obtain the crustal structure in the eastern Great Basin and western Colorado plateau. Adopting a for- ward-modeling approach, we develop a genetic algorithm (GA) based parameter search technique to constrain the one-dimensional crustal structure in these regions. The data are broadband three-component seismograms recorded at the 1994-95 IRIS PASSCAL Colorado Plateau to Great Basin experiment (CPGB) stations and supplemented by data from U.S. National Seismic Network (USNSN) stations in Utah and Nevada. We use the southwestern Wyoming mine collapse event (M(sub b) = 5.2) that occurred on 3 February 1995 as the seismic source. We model the regional seismograms using a four-layer crustal model with constant layer parameters. Timing of teleseismic receiver functions at CPGB stations are added as an additional constraint in the modeling. GA allows us to efficiently search the model space. A carefully chosen fitness function and a windowing scheme are added to the algorithm to prevent search stagnation. The technique is tested with synthetic data, both with and without random Gaussian noise added to it. Several separate model searches are carried out to estimate the variability of the model parameters. The average Colorado plateau crustal structure is characterized by a 40-km-thick crust with velocity increases at depths of about 10 and 25 km and a fast lower crust while the Great Basin has approximately 35- km-thick crust and a 2.9-km-thick sedimentary layer.

Bhattacharyya, Joydeep↗

Seismology of the moon and implications on internal structure, origin and evolution.

The objective of the passive seismic experiment is to measure vibrations of the lunar surface produced by all natural and artificial sources of seismic energy and to use these data to deduce the internal structure and constitution of the moon and the nature of tectonic processes which may be active within the moon. Lunar seismic signals are discussed together with the sources of these signals, and aspects of lunar structure and dynamics. Seismic signals from approximately 250 natural events and from two man-made impacts have been recorded during seven months of operation of the two seismic stations installed during Apollo missions 11 and 12.

Ewing, M.↗

Active seismic experiment

The Apollo 16 active seismic experiment (ASE) was designed to generate and monitor seismic waves for the study of the lunar near-surface structure. Several seismic energy sources are used: an astronaut-activated thumper device, a mortar package that contains rocket-launched grenades, and the impulse produced by the lunar module ascent. Analysis of some seismic signals recorded by the ASE has provided data concerning the near-surface structure at the Descartes landing site. Two compressional seismic velocities have so far been recognized in the seismic data. The deployment of the ASE is described, and the significant results obtained are discussed.

Kovach, R. L.↗

Three-Dimensional Magnetic Restructuring in Two Homologous Solar Flares in the Seismically Active NOAA AR 11283

We carry out a comprehensive investigation comparing the three-dimensional magnetic field restructuring, flare energy release, and the helioseismic response of two homologous flares, the 2011 September 6 X2.1 (FL1) and September 7 X1.8 (FL2) flares in NOAA AR 11283. In our analysis, (1) a twisted flux rope (FR) collapses onto the surface at a speed of 1.5 km s(exp−1) after a partial eruption in FL1. The FR then gradually grows to reach a higher altitude and collapses again at 3 km s(exp−1) after a fuller eruption in FL2. Also, FL2 shows a larger decrease of the flux-weighted centroid separation of opposite magnetic polarities and a greater change of the horizontal field on the surface. These imply a more violent coronal implosion with corresponding more intense surface signatures in FL2. (2) The FR is inclined northward and together with the ambient fields, it undergoes a southward turning after both events. This agrees with the asymmetric decay of the penumbra observed in the peripheral regions. (3) The amounts of free magnetic energy and nonthermal electron energy released during FL1 are comparable to those of FL2 within the uncertainties of the measurements. (4) No sunquake was detected in FL1; in contrast, FL2 produced two seismic emission sources S1 and S2 both lying in the penumbral regions. Interestingly, S1 and S2 are connected by magnetic loops, and the stronger source S2 has a weaker vertical magnetic field. We discuss these results in relation to the implosion process in the low corona and the sunquake generation.

Sun: X-rays↗

HFT events - Shallow moonquakes

A few large distant seismic events of distinctly high signal frequency, designated HFT (high-frequency teleseismic) events, are observed yearly by the Apollo lunar seismic network. Their sources are located on or near the surface of the moon, leaving a large gap in seismic activity between the zones of HFT sources and deep moonquakes. No strong regularities are found in either their spatial or temporal distributions. Several working hypotheses for the identity of these sources have advanced, but many characteristics of the events seem to favor a hypothesis that they are shallow moonquakes. Simultaneous observations of other lunar phenomena may eventually enable the determination of their true identity.

Nakamura, Y.↗

The 26 December 2004 tsunami source estimated from satellite radar altimetry and seismic waves

The 26 December 2004 Indian Ocean tsunami was the first earthquake tsunami of its magnitude to occur since the advent of both digital seismometry and satellite radar altimetry. Both have independently recorded the event from different physical aspects. The seismic data has then been used to estimate the earthquake fault parameters, and a three-dimensional ocean-general-circulation-model (OGCM) coupled with the fault information has been used to simulate the satellite-observed tsunami waves. Here we show that these two datasets consistently provide the tsunami source using independent methodologies of seismic waveform inversion and ocean modeling. Cross-examining the two independent results confirms that the slip function is the most important condition controlling the tsunami strength, while the geometry and the rupture velocity of the tectonic plane determine the spatial patterns of the tsunami.

ocean general circulation model (OGCM)↗

Lunar seismicity and tectonics

Results are presented for an analysis of all moonquake data obtained by the Apollo seismic stations during the period from November 1969 to May 1974 and a preliminary analysis of critical data obtained in the interval from May 1974 to May 1975. More accurate locations are found for previously located moonquakes, and additional sources are located. Consideration is given to the sources of natural seismic signals, lunar seismic activity, moonquake periodicities, tidal periodicities in moonquake activity, hypocentral locations and occurrence characteristics of deep and shallow moonquakes, lunar tidal control over moonquakes, lunar tectonism, the locations of moonquake belts, and the dynamics of the lunar interior. It is concluded that: (1) moonquakes are distributed in several major belts of global extent that coincide with regions of the youngest and most intense volcanic and tectonic activity; (2) lunar tides control both the small quakes occurring at great depth and the larger quakes occurring near the surface; (3) the moon has a much thicker lithosphere than earth; (4) a single tectonic mechanism may account for all lunar seismic activity; and (5) lunar tidal stresses are an efficient triggering mechanism for moonquakes.

Lammlein, D. R.↗

Tectonic structure of Alaska as evidenced by ERTS imagery and ongoing seismicity

The author has identified the following significant results. At least three seismically active faults were identified which had not been previously mapped. One of these passes near the proposed site of a hydroelectric project on the Susitna River. Evidence of the state's past deformational history was obtained, indicating that right lateral offset has occurred sequentially from the northern part of the state to the southern. An apparent fault passes near Fairbanks, and is presumably the source of much seismic activity in the area.

Gedney, L. D.↗

Intraplate seismicity and stresses in young oceanic lithosphere

A systematic study has been conducted of oceanic intraplate seismicity in the 1964-1983 period occurring in lithosphere younger than 35 million years. Detailed findings are presented on the stress in young lithosphere, depth of seismicity, intraplate events in fracture zones, seismicity distributions, and regional concentrations of seismicity. It is concluded that there is no evidence of a general transition from tensional to compressive stresses at any particular age of the lithosphere. Extensional events are located mostly in the Indian Ocean and have tensional axes oriented at large angles to the spreading direction. Compressional axes of thrust faulting events show a weak preferred orientation parallel to the spreading direction. Normal faulting events occur at greater depths and temperatures than thrust faulting events. Differential thermal contraction along fracture zones is not a significant source of intraplate seismicity.

Wiens, D. A.↗

Origin and evolution of the lunar surface - The major questions remaining

The major factors in the evolution of the lunar surface have not been determined yet. Huge lava flows and lunar differentiation, though commonly assumed, is in discord with much of the evidence. The alternative is for most of the surface to represent the last stages of accretion of the moon only, with the chemical differentiation having taken place previously in the source material. Radar, seismic, surface exposure, and mascon evidence can then be accounted for. A large-scale surface transport mechanism of soil must then have been present.

Gold, T.↗

Statistical description of tectonic motions

The behavior of stochastic processes was studied whose power spectra are described by power-law behavior. The details of the analysis and the conclusions that were reached are presented. This analysis was extended to compare detection capabilities of different measurement techniques (e.g., gravimetry and GPS for the vertical, and seismometers and GPS for horizontal), both in general and for the specific case of the deformations produced by a dislocation in a half-space (which applies to seismic of preseismic sources). The time-domain behavior of power-law noises is also investigated.

Agnew, Duncan Carr↗

Coseismic fault slip associated with the 1992 M(sub w) 6.1 Joshua Tree, California, earthquake: Implications for the Joshua Tree-Landers earthquake sequence

Coseismic surface deformation associated with the M(sub w) 6.1, April 23, 1992, Joshua Tree earthquake is well represented by estimates of geodetic monument displacements at 20 locations independently derived from Global Positioning System and trilateration measurements. The rms signal to noise ratio for these inferred displacements is 1.8 with near-fault displacement estimates exceeding 40 mm. In order to determine the long-wavelength distribution of slip over the plane of rupture, a Tikhonov regularization operator is applied to these estimates which minimizes stress variability subject to purely right-lateral slip and zero surface slip constraints. The resulting slip distribution yields a geodetic moment estimate of 1.7 x 10(exp 18) N m with corresponding maximum slip around 0.8 m and compares well with independent and complementary information including seismic moment and source time function estimates and main shock and aftershock locations. From empirical Green's functions analyses, a rupture duration of 5 s is obtained which implies a rupture radius of 6-8 km. Most of the inferred slip lies to the north of the hypocenter, consistent with northward rupture propagation. Stress drop estimates are in the range of 2-4 MPa. In addition, predicted Coulomb stress increases correlate remarkably well with the distribution of aftershock hypocenters; most of the aftershocks occur in areas for which the mainshock rupture produced stress increases larger than about 0.1 MPa. In contrast, predicted stress changes are near zero at the hypocenter of the M(sub w) 7.3, June 28, 1992, Landers earthquake which nucleated about 20 km beyond the northernmost edge of the Joshua Tree rupture. Based on aftershock migrations and the predicted static stress field, we speculate that redistribution of Joshua Tree-induced stress perturbations played a role in the spatio-temporal development of the earth sequence culminating in the Landers event.

Bennett, Richard A.↗

Assessing Potential Geophysical and Environmental Impacts from Frequent Rocket Launch Missions at Kennedy Space Center

Kennedy Space Center (KSC) in Florida has been utilized for space missions over many years with a gradually increasing number of rocket launches. There have been multiple studies where air-coupled acoustic waves and infrasound originating from launched rockets were used for operational purposes, such as locating booster trajectories as a function of changing atmospheric conditions. However, no study has utilized the acoustoelastic waves as a signal source for subsurface seismic investigations. We conducted a dispersion analysis using the seismic energy recorded from the Artemis I rocket launch at KSC in November 2022, and from these results we generated depth-sensitivity kernels at different wave frequencies. The kernels were compared with sedimentary core data to verify boundaries of carbonate layers above the Floridan Aquifer System. Accumulative information of bedrock-sediment boundary across the sedimentary platform could especially provide geo-structural evidence that manifests the configuration of coastal features. Continuous dispersion analysis of seismic recordings from consecutive rocket launches also has potential to identify non-stationary environmental effects, such as reorientation of sedimentary structures and fluctuation of the saltwater/groundwater lens from gravitational tides, which may affect erosional susceptibility of coastal features.

Han Byul Woo↗

Assessing Potential Geophysical and Environmental Impacts from Frequent Rocket Launch Missions at Kennedy Space Center

Kennedy Space Center (KSC) in Florida has been utilized for space missions over many years with a gradually increasing number of rocket launches. There have been multiple studies where air-coupled acoustic waves and infrasound originating from launched rockets were used for operational purposes, such as locating booster trajectories as a function of changing atmospheric conditions. However, no study has utilized the acoustoelastic waves as a signal source for subsurface seismic investigations. We conducted a dispersion analysis using the seismic energy recorded from the Artemis I rocket launch at KSC in November 2022, and from these results we generated depth-sensitivity kernels at different wave frequencies. The kernels were compared with sedimentary core data to verify boundaries of carbonate layers above the Floridan Aquifer System. Accumulative information of bedrock-sediment boundary across the sedimentary platform could especially provide geo-structural evidence that manifests the configuration of coastal features. Continuous dispersion analysis of seismic recordings from consecutive rocket launches also has potential to identify non-stationary environmental effects, such as reorientation of sedimentary structures and fluctuation of the saltwater/groundwater lens from gravitational tides, which may affect erosional susceptibility of coastal features.

Rocket Launch Seismicity↗