Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “scattering length density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Pitch Angle Distributions of Solar Energetic Particles and the Local Scattering Properties of the Interplanetary Magnetic Field

An approximate solution of the Fokker-Planck equation containing pitch angle scattering and adiabatic focusing is discussed. For modest focusing effects the omnidirectional density obeys an ordinary diffusion equation with a modified diffusion coefficient. The anisotropic part of the distribution function is properly normalized and split into an even and an odd part. The even part is determined by the ratio between the scattering mean free path and the focusing length and by the degree of polarization of the magnetic field fluctuations. The odd part is determined by the deviation of the pitch angle scattering from isotropic scattering. The method supplies a powerful tool to obtain the local characteristics of pitch angle scattering. It is insensitive to long lasting solar injections and to moderate radial variations of the mean free path. The method is applied to solar particle events observed on Helio-1 and -2.

Beeck, J.↗

The dispersive evolution of charged-particle bunches in random magnetic fields

Shortly after a strongly anisotropic beam of charged particles is injected along a guiding magnetic field on which is superimposed a small random conponent, the particle density can be represented by a Gaussian profile whose center moves with the coherent velocity and whose width increases with time at a rate controlled by the coefficient of dispersion. Both parameters depend upon the mean free path, which characterizes scattering by the random fields, and the focusing length, which characterizes spatial variations of the guiding field. These dependencies are known explicitly for the coherent velocity. Formulae for coefficient of dispersion are available only in the limits of very weak and very strong focusing. A new expression for coefficient of dispersion, which spans this gap, is presented.

Earl, J. A.↗

An experimental study of air-assist atomizer spray flames

It is noted that air-assisted atomizer spray flames encountered in furnaces, boilers, and gas turbine combustors possess a more complex structure than homogeneous turbulent diffusion flames, due to the swirling motion introduced into the fuel and air flows for the control of flame stability, length, combustion intensity, and efficiency. Detailed comparisons are presented between burning and nonburning condition measurements of these flames obtained by nonintrusive light scattering phase/Doppler detection. Spray structure is found to be drastically changed within the flame reaction zone, with changes in the magnitude and shape of drop number density, liquid flux, mean drop size diameter, and drop mean axial velocity radial distributions.

Mao, Chien-Pei↗

Comparative study of cross-field and field-aligned electron beams in active experiments

Beam-plasma interactions associated with the cross-field and field-aligned injection of electron beams from spacecraft were investigated using a two-dimensional (three velocity component) electrostatic particle simulations. It is shown that the beam properties and plasma response can be characterized well by the ratio between the stagnation time and the plasma response time, which depends on the ratio of the ambient plasma density to the beam density, the beam width, the beam energy, and the spacecraft length. It was found that the beams injected across the field lines tend to lose their coherence after about one or two gyrations due to space-charge oscillations induced by the beam, irrespective of the spacecraft charging. These oscillations scatter the beam electrons into a hollow cylinder of a radius equal to a beam electron gyroradius and thickness of the order of two beam Debye lengths. Parallel injected beams are subjected to similar oscillations, which cause the beam to expand to fill a solid cylinder of a comparable thickness.

Winglee, R. M.↗

Near-Relativistic Solar Electrons and Type III Radio Bursts

Recently it has been found that the inferred injection times of greater than 25 keV electrons are up to 30 minutes later than the start times of the associated type III radio bursts at the Sun. Thus it has been suggested that the electrons that produce type III bursts do not belong to the same population as those observed above 25 keV. This paper examines the characteristics and circumstances of 79 solar electron beam events measured on the ACE spacecraft. Particular attention is paid to the very low frequency emissions of the associated radio bursts and the ambient conditions at the arrival times of the electrons at the spacecraft. It is found that the inferred greater than 25 keV electron injection delays are correlated with the times required for the associated radio bursts to drift to the lowest frequencies. This suggests that the electrons responsible for the radio emission and those observed above 25 keV are part of a single population, and that the electrons both above and below 25 keV are delayed in the interplanetary medium. Further evidence for a single population is the general correspondence between electron and local radio intensities and temporal profiles. It is found that the delays increase with the ambient solar wind density consistent with the propagation times of the electrons being determined by the characteristics of the interplanetary medium. However it is known that particle arrival times at 1 AU are a linear function of inverse particle speed. Conventionally such a relationship is taken to indicate scatter-free propagation when inferred path lengths lie close to 1.2 AU, as they do for the electron events studied here. These conflicting interpretations require further investigation.

Cane, H. V.↗

Measurement of Initial Conditions at Nozzle Exit of High Speed Jets

The time averaged and unsteady density fields close to the nozzle exit (0.1 less than or = x/D less than or = 2, x: downstream distance, D: jet diameter) of unheated free jets at Mach numbers of 0.95, 1.4, and 1.8 were measured using a molecular Rayleigh scattering based technique. The initial thickness of shear layer and its linear growth rate were determined from time-averaged density survey and a modeling process, which utilized the Crocco-Busemann equation to relate density profiles to velocity profiles. The model also corrected for the smearing effect caused by a relatively long probe length in the measured density data. The calculated shear layer thickness was further verified from a limited hot-wire measurement. Density fluctuations spectra, measured using a two-Photomultiplier-tube technique, were used to determine evolution of turbulent fluctuations in various Strouhal frequency bands. For this purpose spectra were obtained from a large number of points inside the flow; and at every axial station spectral data from all radial positions were integrated. The radially-integrated fluctuation data show an exponential growth with downstream distance and an eventual saturation in all Strouhal frequency bands. The initial level of density fluctuations was calculated by extrapolation to nozzle exit.

Panda, J.↗

Possible effect of subsurface inhomogeneities on the lunar microwave spectrum

Inhomogeneities beneath the lunar surface could alter the average microwave emission spectrum of the moon in a fashion generally consistent with observations, even in the absence of an average heat flux or density gradients with depth. The lunar subsurface was modeled as an inhomogeneous lossy dielectric with three-dimensional refractive-index fluctuations characterized by independent horizontal and vertical correlation lengths. The model suggests that attempts to infer the physical properties of the moon from the lunar microwave spectrum could be significantly inaccurate if subsurface scattering were neglected.

Fisher, A. D.↗

The effect of dispersion upon charged particle transport in random magnetic fields

Shortly after a strongly anisotropic beam is injected along a guiding magnetic field on which is superposed a small random component, the charged-particle density can be represented by a Gaussian profile whose center moves with the coherent velocity and whose width increases with time at a rate controlled by the coefficient of dispersion. Both parameters of this coherent mode of propagation depend upon the mean free path, which characterizes scattering by the random fields, and the focusing length, which characterizes spatial variations of the guiding field. These dependences are known explicitly for the coherent velocity, but expressions for the coefficient of dispersion are available only in the limits of very weak and very strong focusing. To span this gap, a more comprehensive analytic description of focused transport has been developed. This description includes dispersion and is valid for arbitrary spatial dependences of both the scattering mean free path and the focusing length.

Earl, James A.↗

Properties of a large-scale interplanetary loop structure as deduced from low-energy proton anisotropy and magnetic field measurements

Correlated particle and magnetic field measurements by the ISEE 3 spacecraft are presented for the loop structure behind the interplanetary traveling shock event of Nov. 12, 1978. Following the passage of the turbulent shock region, strong bidirectional streaming of low-energy protons is observed for approximately 6 hours, corresponding to a loop thickness of about 0.07 AU. This region is also characterized by a low relative variance of the magnetic field, a depressed proton intensity, and a reduction in the magnetic power spectral density. Using quasi-linear theory applied to a slab model, a value of 3 AU is derived for the mean free path during the passage of the closed loop. It is inferred from this observation that the proton regime associated with the loop structure is experiencing scatter-free transport and that either the length of the loop is approximately 3 AU between the sun and the earth or else the protons are being reflected at both ends of a smaller loop.

Tranquille, C.↗

Nighttime mesospheric returns associated with a large scale flare event

Magnetic storms associated with large flares can give D region ionization. Special measurements are made at night to evaluate the nature of mesospheric returns obtained under storm conditions. Five periods of time are tabulated varying in length from 20 min to 60 min at which scattered power is observed above the noise level. The three values of k(p) corresponding to the five periods are also given, as is the mean power over noise observed. The scattered powers from 78 to 81 km are comparable with those observed during the day, indicating that a similar ionization density is present. The peak power levels are approximately the same in both cases; but whereas the night data come from an essentially zero background, the day data arise from a substantial level of background scatter. This implies that the periods indicated are the only times at which any substantial particle precipitation is taking place; and that the consequent ionization is confined to the height region shown.

Bowhill, S. A.↗

Coronal proton transport in the presence of Alfven waves and implications for impact line linear polarization

The transport of fast (about 1 MeV) protons in the corona is considered when their density and ansiotropy are sufficiently large to excite Alfven waves. The Alfven waves scatter the protons and make them almost isotropic. The Alfven wave instability remains in a marginally stable state in which the proton anisotropy is just large enough to excite Alfven waves to a level which would eliminate any greater anisotropy. The protons propagate diffusively down a coronal loop and have a path length of order 100 times their length in the absence of Alfven waves. This increases their Coulomb losses, and much higher energy protons (2-20 MeV) are required initially to produce H-alpha impact line linear polarization in the chromosphere as compared to the case in the absence of Alfven waves (about 200 keV) for loop lengths about 10 to the 9th cm. The interpretation of the observed polarization becomes less direct because it depends on more poorly known parameters than in the case of the absence of Alfven waves.

Smith, Dean F.↗

Microbial Diffraction Gratings as Optical Detectors for Heavy Metal Pollutants

As a significant industrial pollutant, cadmium is implicated as the cause of itai-itai disease. For biological detection of cadmium toxicity, an assay device has been developed using the motile response of the protozoa species, Tetrahymena pyriformis. This mobile protozoa measures 50 microns in diameter, swims at 10 body lengths per second, and aggregates into macroscopically visible patterns at high organism concentrations. The assay demonstrates a Cd(+2) sensitivity better than 1 micro-M and a toxicity threshold to 5 micro-M, thus encouraging the study of these microbial cultures as viable pollution detectors. Using two-dimensional diffraction patterns within a Tetrahymena culture, the scattered light intensity varies with different organism densities (population counts). The resulting density profile correlates strongly with the toxic effects at very low dosages for cadmium (less than 5 ppm) and then for poison protection directly (with nickel and copper antagonists competing with cadmium absorption). In particular, copper dosages as low as 0.1-0.5 mM Cu have shown protective antagonism against cadmium, have enhanced density variability for cultures containing 1 mM Cd(+2) and therefore have demonstrated the sensitivity of the optical detection system. In this way, such microbial diffraction patterns give a responsive optical measure of biological culture changes and toxicity determination in aqueous samples of heavy metals and industrial pollutants.

Noever, David↗

Tunable diode laser IR spectrometer for in situ measurements of the gas phase composition and particle size distribution of Titan's atmosphere

A new instrument, the Probe Infrared Laser Spectrometer (PIRLS), is described for in situ sensing of the gas composition and particle size distribution of Titan's atmosphere on the NASA/ESA Cassini mission. For gas composition measurements, several narrow-band (0.0001/cm) tunable lead-salt diode lasers operating near 80 K at selected mid-IR wavelengths are directed over a path length defined by a small reflector extending over the edge of the probe spacecraft platform; volume mixing ratios of 10 to the -9th should be measurable for several species of interest. A cloud-particle-size spectrometer using a diode laser source at 780 nm shares the optical path and deployed reflector; a combination of imaging and light scattering techniques is used to determine sizes of haze and cloud particles and their number density as a function of altitude.

Webster, Christopher R.↗

On the feasibility of microwave produced Bragg reflector: Examined by the chamber experiment

A set of parallel plasma layers is generated by two intersecting microwave pulses in a chamber containing dry air at a pressure comparable to the upper atmosphere. The dependencies of breakdown conditions on the pressure and pulse length are examined. The results are shown to be consistent with the appearance of tail erosion of microwave pulse caused by air breakdown. A Bragg scattering experiment using the plasma layers as a Bragg reflector is then performed. Both time domain and frequency domain measurements of wave scattering are conducted. The results are found to agree very well with the theory. Moreover, the time domain measurement of wave scattering provides an unambiguous way for determining the temporal evolution of electron density during the first 100 microsec period. A Langmuir double probe is also used to determine the decay rate of electron density during a later time interval (1 to 1.1 ms). The propagation of high power microwave pulses through the air is also studied experimentally. The mechanism responsible for two different degrees of tail erosion were identified. The optimum amplitude of a 1.1 microsec pulse for maximum energy transfer through the air was determined.

Kuo, S. P.↗

Laboratory chamber experiments exploring the potential use of artificially ionized layers of gas as a Bragg reflector for over-the-horizon signals

A set of parallel plasma layers is generated by two intersecting microwave pulses in a chamber containing dry air at a pressure comparable to the upper atmosphere. The dependence of the breakdown conditions on the pressure and pulse length is examined. The results are shown to be consistent with the appearance of tail erosion of microwave pulse caused by air breakdown. Bragg scattering experiments, using the plasma layers as a Bragg reflector are then performed. Both time domain and frequency domain measurements of wave scattering are conducted. The experimental results are found to agree very well with the theory. Moreover, the time domain measurement of wave scattering provides an unambiguous way for determining the temporal evolution of electron density during the first 100-microsec period.

Kuo, S. P.↗

Interstellar turbulence, random density variations, and scintillation measurements

The presence of random electron variations suggests that the ionized interstellar medium is turbulent. In the interstellar plasma the presence of power spectra of such variations extending to spatial scales much less than a Coulomb mean free path, Lambda sub c, is required by analyses of measurements of scintillation and angular broadening of pulsar radio signals. The existence of corresponding variations in magnetic field strength could efficiently scatter cosmic rays and thus constrain cosmic-ray propagation. Unfortunately both the origin of the electron density variations and mechanisms by which these variations couple to fluctuations in magnetic field strength are unknown. It is conjectured that the small-scale density variations are generated by the convective distortion of initially large-scale isobaric entropy structures in the turbulent interstellar plasma. An investigation of the spectra of turbulent entropy structures, velocity, and magnetic fields at small spatial scales is made. The modifier small is employed to characterize length scales much less than the dimension, L, containing the bulk of the turbulent energy.

Higdon, J. C.↗

Critical fluid light scattering

The objective is to measure the decay rates of critical density fluctuations in a simple fluid (xenon) very near its liquid-vapor critical point using laser light scattering and photon correlation spectroscopy. Such experiments were severely limited on Earth by the presence of gravity which causes large density gradients in the sample when the compressibility diverges approaching the critical point. The goal is to measure fluctuation decay rates at least two decades closer to the critical point than is possible on earth, with a resolution of 3 microK. This will require loading the sample to 0.1 percent of the critical density and taking data as close as 100 microK to the critical temperature. The minimum mission time of 100 hours will allow a complete range of temperature points to be covered, limited by the thermal response of the sample. Other technical problems have to be addressed such as multiple scattering and the effect of wetting layers. The experiment entails measurement of the scattering intensity fluctuation decay rate at two angles for each temperature and simultaneously recording the scattering intensities and sample turbidity (from the transmission). The analyzed intensity and turbidity data gives the correlation length at each temperature and locates the critical temperature. The fluctuation decay rate data from these measurements will provide a severe test of the generalized hydrodynamic theories of transport coefficients in the critical regions. When compared to equivalent data from binary liquid critical mixtures they will test the universality of critical dynamics.

Gammon, Robert W.↗

On optical imaging through aircraft turbulent boundary layers

Optical resolution quality as affected by aircraft turbulent boundary layers is analyzed. Wind-tunnel data was analyzed to obtained the variation of boundary layer turbulence scale length and mass density rms fluctuations with Mach number. The data gave good agreement with a mass density fluctuation turbulence spectrum that is either isotropic of orthogonally anisotropic. The data did not match an isotropic turbulence velocity spectrum which causes an anisotropic non-orthogonal mass density fluctuation spectrum. The results indicate that the average mass density rms fluctuation is about 10% of the maximum mass density across the boundary layer and that the transverse turbulence scale size is about 10% of the boundary layer thickness. The results indicate that the effect of the turbulent boundary layer is large angle scattering which decreases contrast but not resolution. Using extinction as a criteria the range of acceptable aircraft operating conditions are given.

Sutton, G. W.↗