Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “response surface methodology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Response Surface Methodology As a New Approach for Finding Optimal MALDI Matrix Spraying Parameters for Mass Spectrometry Imaging

Automated spraying devices have become ubiquitous in laboratories employing matrixassisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI), in part because they permit control of a number of matrix application parameters that can easily be reproduced for intra- and interlaboratory studies. Determining the optimal parameters for MALDI matrix application, such as temperature, flow rate, spraying velocity, number of spraying cycles, and solvent composition for matrix application, is critical for obtaining high-quality MALDI-MSI data. However, there are no established approaches for optimizing these multiple parameters simultaneously. Instead optimization is performed iteratively (i.e., one parameter at a time), which is time consuming and can lead to overall non-optimal settings. In this report, we demonstrate the use a novel experimental design and the response surface methodology to optimize five parameters of MALDI matrix application using a robotic sprayer. Thirtytwo combinations of MALDI matrix spraying conditions were tested, which allowed us to elucidate relationships between each of the application parameters as determined by MALDI-MS (specifically, using a 15 Tesla Fourier transform ion cyclotron resonance mass spectrometer). As such, we were able to determine the optimal automated spraying parameters that minimized signal de-localization and enabled high MALDI sensitivity. We envision this optimization strategy can be utilized for other MALDI-MSI applications, tissue types, and matrix application approaches.

60 APPLIED LIFE SCIENCES↗

A New Protocol for Efficient and High Yield Preparation of Nanocellulose from Elaeis guineensis Biomass: A Response Surface Methodology (RSM) Study

An innovative system for isolating nanocellulose was established that uses Ni(NO{sub 3}){sub 2} transition metal salt without the assistance of mechanical disintegrations or mineral acid and was compared with the classic production by tedious acid hydrolysis. Optimization study on Ni(II)-catalyzed hydrolysis of cellulose isolated from oil palm (Elaeis guineensis) empty fruit bunch (OPEFB) towards nanocellulose yield was investigated. Response surface methodology-central composite design was used to design and optimize the experiments with three operating parameters: pH of Ni(NO{sub 3}){sub 2} (pH 2–4), reaction time (20‒100 min) and reaction temperature (25‒65 °C). The present study indicated that the nanocellulose yield as high as 81.37% was achieved under hydrolysis conditions of pH 3, 58 °C within 58 min. At the optimum conditions, the OPEFB derived nanocellulose rendered high crystallinity of 91.1% and excellent thermal stability of 341 °C. Evidence of the successful isolation of nanocellulose was proven by HRTEM observation revealing fibrils formed the long and interconnected network-like structure with the average width of 41.1 ± 1.6 nm and several micrometers in length, which resulted in high aspect ratio. Thus, the obtained nanocellulose via Ni(II)-catalyzed hydrolysis has numerous potential applications and represent a green alternative for the treatment of OPEFB. This study provided a facile high yield procedure for the production of nanocellulose with similar characteristics to traditional nanocellulose, which was significant to the commercialization of nanocellulose.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Biomass Grinding Process Optimization Using Response Surface Methodology and a Hybrid Genetic Algorithm

Biomass could be a key source of renewable energy. Agricultural waste products, such as corn stover, provide a convenient means to replace fossil fuels, such as coal, and a large amount of feedstock is currently available for energy consumption in the U.S. This study has two main objectives: (1) to understand the impact of corn stover moisture content and grinder speed on grind physical properties; and (2) develop response surface models and optimize these models using a hybrid genetic algorithm. The response surface models developed were used to draw surface plots to understand the interaction effects of the corn stover grind moisture content and grinder speed on the grind physical properties and specific energy consumption. The surface plots indicated that a higher corn stover grind moisture content and grinder speed had a positive effect on the bulk and tapped density. The final grind moisture content was highly influenced by the initial moisture content of the corn stover grind. Optimization of the response surface models using the hybrid genetic algorithm indicated that moisture content in the range of 17 to 19% (w.b.) and a grinder speed of 47 to 49 Hz maximized the bulk and tapped density and minimized the geomantic mean particle length. The specific energy consumption was minimized when the grinder speed was about 20 Hz and the corn stover grind moisture content was about 10% (w.b.).

09 BIOMASS FUELS↗

Response surface methodology guided adsorption and recovery of free fatty acids from oil using resin

The presence of free fatty acids interferes with the conversion of plant oils to biodiesel. In this work, four strong and weak base resins were evaluated for the removal of free fatty acids (FFA) from oil. Amberlite FPA 51 showed the highest adsorption capacity of FFA. A resin concentration above 3% could enable a higher percentage FFA adsorption. The adsorption process fitted a pseudo-first-order kinetic model and achieved equilibrium in approximately 8 h. A full factorial design was used to optimize the resin and FFA concentrations at a fixed temperature (40°C). A ratio of resin to fatty acid concentrations above 1.875 was sufficient for 70% adsorption and the amount adsorbed continued to increase with further added resin. A two-step washing of resin using hexane and ethanol recovered approximately 67.55%±4.05% of the initially added fatty acid. The resin that was used was regenerated with 5% NaOH and re-used for a minimum of three consecutive cycles. However, the adsorption capacity diminished to 75% of the initial cycle in cycles 2 and 3. Thus, the work presents a resin-based process for deacidification of oil to reduce fatty acid content of oil for biodiesel production.

09 BIOMASS FUELS↗

Modelling and Optimization of Uranium (VI) Ions Adsorption Onto Nano-ZnO/Chitosan Bio-composite Beads with Response Surface Methodology (RSM)

Nano-ZnO-chitosan bio-composite beads were prepared for the sorption of UO{sub 2}{sup 2+} from aqueous media. The resulting nano-ZnO/CTS bio-composite beads were characterized by TEM, XRD etc. The sorption of UO{sub 2}{sup 2+} by bio-composite beads was optimized using RSM. The correlation between four variables was modelled and studied. According to RSM data, correlation coefficients (R{sup 2} = 0.99) and probability F-values (F = 2.24 × 10{sup − 10}) show that the model fits the experimental data well. Adsorption capacity for nano-ZnO/CTS bio-composite beads was obtained at 148.7 mg/g under optimum conditions. The results indicate that nano-ZnO/CTS bio-composite beads are appropriate for the adsorption of UO{sub 2}{sup 2+} ions from aqueous media. Also, the suitability of adsorption values to adsorption isotherms was researched and thermodynamic data were calculated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Highly Efficient Removal of Lead Ions from Aqueous Solutions Using Chitosan/Rice Husk Ash/Nano Alumina with a Focus on Optimization by Response Surface Methodology: Isotherm, Kinetic, and Thermodynamic Studies

In the present study, an adsorbent named chitosan/rice husk ash/nano-γ alumina was prepared and used for the removal of lead ions from aqueous solutions. It was characterized by FESEM, FTIR, XRD, and BET. The important and interactive effects of some considered parameters, such as the initial lead ion concentration, pH, adsorbent mass and contact time, were estimated and optimized by using the central composite design (CCD). The Maximum adsorption efficiency of lead ions under optimum conditions, including the pH of 5, adsorbent mass of 0.01 g, the initial lead ion concentration of 30 ppm, and the contact time of 105 min, was achieved to be 90.98%. The adsorption kinetic was consistent with the pseudo-second-order model (R{sup 2} = 0.9967). The lead adsorption isotherms were well fitted to the Langmuir model, indicating the maximum adsorption capacity of 181.82 mg g{sup −1}. Thermodynamic parameters (R{sup 2}: 0.9200, ΔH°: − 22871.81 kJ mol{sup −1}, ΔG{sup °}: − 10.63 kJ mol{sup −1}, and ΔS{sup °}: 118.37 kJ mol{sup −1} K{sup −1}) were calculated and indicating adsorption process was exothermic and spontaneous in the temperature range of 283.15–313.15 k. The maintenance above 70% capacity of the adsorbent was observed by the regeneration study of chitosan/rice husk ash/nano-γ alumina after six cycles. Comparison of adsorption efficiency of the studied adsorbent and other adsorbents in the removal of lead ions was also done in this paper. Consequently, the excellent properties of the presented nanocomposite could make it an ideal adsorbent for the removal of lead ions from aqueous solutions. Graphical Abstract: .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Data from Response Surface Methodology Guided Adsorption and Recovery of Free Fatty Acids from Oil Using Resin

The presence of free fatty acids interferes with the conversion of plant oils to biodiesel. Four strong and weak base resins were evaluated for the removal of free fatty acids (FFA) from oil. Amberlite FPA 51 showed the highest adsorption capacity of FFA. A resin concentration above 3% could enable a higher percentage FFA adsorption. The adsorption process fitted a pseudo-first-order kinetic model and achieved equilibrium in approximately 8 h. A full factorial design was used to optimize the resin and FFA concentrations at a fixed temperature (40° C). A ratio of resin to fatty acid concentrations above 1.875 was sufficient for 70% adsorption and the amount adsorbed continued to increase with further added resin. A two-step washing of resin using hexane and ethanol recovered approximately 67.55% ± 4.05% of the initially added fatty acid. The resin that was used was regenerated with 5% NaOH and re-used for a minimum of three consecutive cycles. However, the adsorption capacity diminished to 75% of the initial cycle in cycles 2 and 3. Thus, the work presents a resin-based process for deacidification of oil to reduce fatty acid content of oil for biodiesel production.

Conversion↗

An integrated approach to optimizing concentration shock wave electrodialysis using 2D multicell simulation and response surface models

Shock wave electrodialysis (SWED) is a highly promising technique for energy-efficient ion separation in the context of a circular economy. This paper presents a approach way of modeling and improving SWED using a two-dimensional multicell model combined with the COMSOL program and response surface methodology. The model integrates the Nernst-Planck equation, Darcy's law, and first-order electroosmosis to examine the local concentration, flux of ionic species, distribution of current, and velocity of flow in SWED cells under various operating conditions. We first illustrate the clear depiction of concentration, velocity, and electric potential distribution through contours which aids in identifying optimal operating conditions and designing scalable SWED systems. The results emphasize the significance of surface charge density and voltage in influencing the features of shock waves for obtaining effective ion separation while optimizing energy consumption and improving current efficiency by controlling the retention time of feed flow. Here, this study defines two crucial characteristics of shock waves, namely the length of the flat depletion zone of a fully developed shock wave (shock wave height) and the distance of shock wave propagation (shock wave length). These properties significantly impact separation performance, as determined by the simulation results. Additionally, the response surface methodology is incorporated with the COMSOL models to develop predictive models and graph responses, enabling a more comprehensive understanding of the interactions between parameters and performance indicators, such as removal ratio, energy consumption, and water recovery. Finally, this work suggests design tactics for expanding SWED processes and outlines potential areas for further research. This research provides valuable insights into the prospective applications, design optimization, and scalability of SWED in the field of electrokinetic separation technologies for green chemistry and a circular economy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimization of stabilized leachate treatment using ozone/persulfate in the advanced oxidation process

Highlights: ► Ozone and persulfate reagent (O{sub 3}/S{sub 2}O{sub 8}{sup 2-}) was used to treat stabilized leachate. ► Central composite design (CCD) with response surface methodology (RSM) was applied. ► Operating variables including ozone and persulfate dosage, pH variance, and reaction time. ► Optimum removal of COD, color, and NH{sub 3}–N was 72%, 96%, and 76%, respectively. ► A good value of ozone consumption (OC) obtained with 0.60 (kg O{sub 3}/kg COD). - Abstract: The objective of this study was to investigate the performance of employing persulfate reagent in the advanced oxidation of ozone to treat stabilized landfill leachate in an ozone reactor. A central composite design (CCD) with response surface methodology (RSM) was applied to evaluate the relationships between operating variables, such as ozone and persulfate dosages, pH, and reaction time, to identify the optimum operating conditions. Quadratic models for the following four responses proved to be significant with very low probabilities (<0.0001): COD, color, NH{sub 3}–N, and ozone consumption (OC). The obtained optimum conditions included a reaction time of 210 min, 30 g/m{sup 3} ozone, 1 g/1 g COD{sub 0}/S{sub 2}O{sub 8}{sup 2-} ratio, and pH 10. The experimental results were corresponded well with predicted models (COD, color, and NH{sub 3}–N removal rates of 72%, 96%, and 76%, respectively, and 0.60 (kg O{sub 3}/kg COD OC). The results obtained in the stabilized leachate treatment were compared with those from other treatment processes, such as ozone only and persulfate S{sub 2}O{sub 8}{sup 2-} only, to evaluate its effectiveness. The combined method (i.e., O{sub 3}/S{sub 2}O{sub 8}{sup 2-}) achieved higher removal efficiencies for COD, color, and NH{sub 3}–N compared with other studied applications. Furthermore, the new method is more efficient than ozone/Fenton in advanced oxidation process in the treatment of the same studied leachate.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Geometry Optimization for Structural Reliability and Performance of a Thermoelectric Generator

The opposing requirements for the performance and reliability of a thermoelectric generator (TEG) are investigated with numerical finite element analysis simulations. The parameters that significantly influence the operational performance and structural reliability of a TEG are considered for simultaneous optimization. The design of experiments (DOE) based response surface optimization methodology in conjunction with results from finite element analysis was employed to identify optimal parameters from the structural reliability and performance (power output and efficiency) perspectives. A high temperature bismuth telluride based TEG couple was used in the studies to demonstrate the general applicability of the methodology. The response surface methodology is found to be a robust technique that can expedite the process of geometry optimization of a TE device during the research and development phase of TEG devices fabricated from new thermoelectric materials.

Karri, Naveen K.↗

Statistical Design of Experiments Enables Rapid Exploration of Perfluorobutane Sulfonate Degradation

The phase-out of long-chain PFAS has led to the proliferation of highly recalcitrant short-chain analogs, and mineralization technologies for these short-chain PFAS are needed to mitigate their deleterious effects on environmental and human health. In this study, we utilize a statistical design of experiments, specifically, response surface methodology, to rapidly evaluate the electrochemical degradation of the short-chain PFAS, perfluorobutane sulfonate (PFBS). We evaluate the impacts of the three primary electrochemical parameters (concentration of PFBS, concentration of supporting electrolyte, and applied current) over multiple orders of magnitude on the three primary reaction outcomes of electrochemical PFBS degradation (incomplete PFBS decomposition, complete PFBS mineralization as fluorine, and anodic energy consumption). Our results correspond with literature and clearly identify the well-known tradeoff between energy consumption and complete mineralization. Intriguingly, partial PFBS decomposition and energy consumption demonstrate nonlinear dependencies in the current/supporting electrolyte concentration space and the current/PFBS concentration space, respectively. These findings highlight the utility of the response surface methodology model to efficiently interrogate a large parameter space, identifying both common results and less-obvious interactions between electrochemical parameters and their influences on reaction outcomes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design and analysis of confirmation experiments

The statistical literature and practitioners have long advocated the use of confirmation experiments as the final stage of a sequence of designed experiments to verify that the optimal operating conditions identified as part of a response surface methodology strategy are attainable and able to achieve the value of the response desired. Yet, until recently there has been a gap between this recommendation and details about how to perform an analysis to quantitatively assess whether the confirmation runs are adequate. Likewise, there has been little in the way of specific recommendations for the number and nature of the confirmation runs that should be performed. In this article, we propose analysis methods to assess agreement between the mean response from previous experiments and the confirmation experiment, and suggest a strategy for the design of confirmation experiments that more fully explores the region around the optimum.

97 MATHEMATICS AND COMPUTING↗