Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “renewables in mining”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Future PM 2.5 emissions from metal production to meet renewable energy demand

A shift from fossil fuel to renewable energy is crucial in limiting global temperature increase to 2 °C above preindustrial levels. However, renewable energy technologies, solar photovoltaics, wind turbines, and electric vehicles are metal-intensive, and the mining and smelting processes to obtain the needed metals are emission-intensive. We estimate the future PM 2.5 emissions from mining and smelting to meet the metal demand of renewable energy technologies in two climate pathways to be 0.3–0.6 Tg yr -1 in the 2020–2050 period, which are projected to contribute 10%–30% of total anthropogenic primary PM 2.5 combustion emissions in many countries. The concentration of mineral reserves in a few regions means the impacts are also regionally concentrated. Rapid decarbonization could lead to a faster reduction of overall anthropogenic PM 2.5 emissions but also could create more unevenness in the distributions of emissions relative to where demand occurs. Options to reduce metal-related PM 2.5 emissions by over 90% exist and are well understood; introducing policy requiring their installation could avoid emission hotspots.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Degradation and Accelerated Recovery of Surface Passivation in n+, p+, and Intrinsic Poly-Si/SiOx Passivating Contacts for Silicon Solar Cells

We report on the degradation and recovery of surface passivation of fired poly-Si/SiOx passivating contacts with hydrogen containing Al2O3 during annealing in the dark and under illumination. Upon firing to a peak temperature of 670 degrees C, the iVoc for symmetric test structures with n+, p+, and intrinsic poly-Si/SiOx contacts decreases due to a loss of surface passivation. Upon further annealing over the temperature range of 200-350 degrees C in the dark, depending on the type of doping, the surface passivation either shows further degradation followed by recovery, or direct recovery to the initial iVoc. Annealing at higher temperatures and/or higher illumination intensities accelerates the kinetics for both degradation and recovery processes. We show that the degradation and recovery processes are thermally activated and proceed identically in subsequent firing and annealing steps showing their cyclic nature. We present a series reaction model to explain the kinetics of degradation and recovery processes for n+ and intrinsic poly-Si/SiOx contacts. By fitting the model's rate expressions to the data, the determined effective activation energy barriers for degradation and recovery for n+ poly-Si/SiOx contacts in the dark are 1.24 and 1.51 eV, which are lowered under 7.5 Suns illumination to 0.76 and 1.15 eV, respectively.

14 SOLAR ENERGY↗
DOE OSTI2025

Rheological Properties of Enzymatically Hydrolyzed Corn Stover Pretreated via Deacetylation and Mechanical Refining

Lignocellulosic biomass is a feedstock for fuels and chemicals that does not compete with food resources and has less contaminants than refuse-derived biomass feedstocks. To convert lignocellulosics to biofuels or value-added products, multiple processing steps are typically necessary. One method of producing biofuels from lignocellulosic biomass utilizes a deacetylation and mechanical refining pretreatment and an enzymatic hydrolysis reaction to produce fermentable sugars from cellulose and hemicellulose. The rheological properties of biomass, such as yield stress and plastic viscosity, change during enzymatic hydrolysis and alter the energy requirements for pumping and mixing, an important consideration for the design of processing equipment. The dynamic changes in rheological properties that occur in a corn stover feedstock undergoing enzymatic hydrolysis are characterized in this work, and the influence on pressure losses in piping systems is estimated. Two rheometer geometries were fabricated with stereolithography 3D printing to reduce wall slip and sample ejection. The slurries have complex rheological behaviors that include shear-thinning behavior. Shear stress ramps were performed on samples at 20 and 50 degrees C using the custom geometries, and the Herschel-Bulkley model was fit to the data. The dynamic nature of the rheological properties is correlated with changes in the average fiber length at various extents of reaction, and the influence of solids concentration on the observed rheology and piping pressure losses is discussed.

09 BIOMASS FUELS↗
DOE OSTI2022

An Open-Source Framework for PV in the Circular Economy Evaluation

This open-source tool follows the dynamic Material and flows for each component and material in a PV system, from mining to end of life to evaluate the material and energy impacts of different paths. Following circularity principles, virgin material inputs can be offset by recovered materials to reduce impacts due to mining and extraction. Unlike consumer products, renewable energy technologies generate power over their useful life to quickly offset energy required for manufacturing. The model provides unique baselines of PV evolution, and allows us to evaluate the material and soon energy return on investment of decisions such as field repair, off-site refurbishment, reuse, or recycling. Energy layer and cost, as well as visual dashboard under development.

circular economy modeling↗
DOE OSTI2025

Bifunctionality of supported metal hydrodeoxygenation catalysts

The transition to sustainable energy relies on innovative methods to convert biomass-derived compounds into viable biofuels. In this study, the hydrodeoxygenation (HDO) of 6-undecanone is used as a model reaction to screen bifunctional catalysts, where metal sites facilitate hydrogenation and the support promotes deoxygenation, enabling high conversion and selectivity toward desirable alkanes for biofuel production. This reaction is particularly relevant as it represents a critical step in upgrading volatile fatty acids, derived from biomass, into long-chain hydrocarbons suitable for fuel applications. By examining a range of metals (nickel, cobalt, and tin) on different supports, it is revealed that the choice of metal–support combination is critical to catalyst performance. Zeolite beta's 3D microporous structure and adjustable acidity provide an ideal environment for fine-tuning metal–support interactions (MSIs), which are essential for balancing deoxygenation with alkane isomerization, a desirable trait for biofuels.

09 BIOMASS FUELS↗
DOE OSTI2026

Sustainable Critical Minerals: Mining, Production, and Legacy

Critical minerals (CMs) are required in renewable energy systems, electric vehicles, electronics, and national defense. Global demand has increased rapidly due to energy and digital transitions, and the United States has become increasingly reliant on vulnerable supply chains. Geological scarcity, trade barriers, environmental hurdles, and processing challenges impede domestic CM production growth. Emerging strategies, including circular economy practices and advanced sustainable mining and processing techniques, can mitigate supply chain and economic risks. To advance these approaches, consistent research priorities, policy revisions, and technology investments are required to develop a resilient CM supply. Doing so with a focus on sustainability goals can simultaneously advance domestic economic and technological goals while limiting environmental impacts and supporting global environmental goals.

biomining↗
DOE OSTI2025

Heterogeneity of the Dominant Causes of Performance Loss in End-of-Life Cathodes and Their Consequences for Direct Recycling

Recycling Li-ion batteries from electric vehicles is critical for reducing costs and supporting the development of a domestic battery supply chain. Direct recycling of cathodes, like LiNixMnyCozO2 (NMC), is attractive due to its low cost, energy use, and emissions compared to traditional recycling techniques. However, a comprehensive understanding of the active material properties at end-of-life is needed to guide direct recycling processes and the performance-dependent reuse applications. Here, NMC material from an end-of-life commercial pouch cell is characterized and bench-marked against pristine non-cycled counterparts with respect to capacity, impedance, crystallography, morphology, and microstructure to identify major degradation modes and understand variability in the end-of-life material. The spatial heterogeneity of each property throughout the cell is also quantified. While the degraded material demonstrated similar capacity as the pristine, its impedance and rate capability are severely diminished. Furthermore, samples from the periphery of the electrode layers showed more severe performance loss compared to samples extracted from central regions. The dominant culprit of performance loss is the material microstructure, where the magnitude of particle cracking showed the strongest correlation to the impedance components that are most unfavorably impacted. This work suggests severe cracks in cathode active materials are the primary challenge that direct recycling methods must overcome.

25 ENERGY STORAGE↗
DOE OSTI2025

Laser Ablation for Low-Cost Multijunction III-V Solar Cell Mesa Isolations

Eliminating photolithography from solar cell processing is a significant opportunity for cost reduction for III-V solar cells. In this work, we test femtosecond laser ablation and scribing as an alternative to contact photolithography and wet chemical etching for mesa isolation, when processing multijunction cells. We demonstrate that upright multijunction solar cells isolated by using the laser as a scribe to cleave through the substrate had virtually no performance loss when compared to a baseline cell processed with photolithography. By contrast, cells isolated by laser ablating through the active layers have performance losses that cannot be fully eliminated with post-processing etches. This demonstration of photolithography-free mesa isolation with no performance losses is promising for less expensive III-V manufacturing.

14 SOLAR ENERGY↗
DOE OSTI2025

Measurement of Contact Resistivity In Symmetric Polycrystalline Si/SiO x /Monocrystalline Si Test Structures Using Variable Light Illumination

While different methods exist to determine the contact resistivity in semiconductor devices, these methods are limited to measurement of the majority carrier contacts. The measurement of p‐ or n‐type contacts on n‐ or p‐type crystalline silicon, respectively, is challenging due to the blocking diode formed by the p–n junction. In this article, we address this problem for tunneling oxide passivating contacts used in high‐efficiency Si solar cells. We propose a universal method to extract contact resistivity on symmetric test structures with polycrystalline silicon on SiO x (poly‐Si/SiO x ) passivating contacts under illumination, both for p–n and high–low‐junction passivated contacts. In this method, we demonstrate that the total contact resistance of each cell grid finger to the base wafer is governed by its effective contact area, defined by the transfer length extending from both sides of the finger. Therefore, the grid contact resistance of a poly‐Si contact depends on the ratio of the doped poly‐Si sheet resistance to the tunneling contact resistivity.

14 SOLAR ENERGY↗
DOE OSTI2025

Structural characterization of highly alloyed (Al,Gd)N thin films

Highly alloyed (Al,Gd)N is of potential interest in a variety of applications, including neutron detection and in devices such as non-volatile memory. Gd has been shown to have very low equilibrium solubility in AlN at room temperature; however, non-equilibrium deposition techniques such as sputtering are able to deposit thin films, which incorporate large amounts of Gd. Here, we characterize a highly-alloyed (Al,Gd)N combinatorial thin film grown by RF sputtering on a GaN substrate, looking for any evidence of chemical or phase segregation or structural disorder in the films. Compositions with between 13% and 32% Gd (on a cation basis) were studied. No evidence was found for chemical or phase segregation in any studied composition. Higher degrees of Gd incorporation led to greater structural disorder in the film and a tendency toward amorphization; however, electron diffraction shows that the film does not become fully amorphous at any of the studied compositions, instead retaining textured local order even at 32% Gd. Electron energy loss spectra suggest that the material retains a locally wurtzite-like tetrahedral bonding environment at all studied compositions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Characterization of dangling bond defects at the crystalline Si/SiO x interface in a polycrystalline Si passivating contact solar cell at room temperature with electrically detected magnetic resonance spectroscopy

Monocrystalline silicon solar cells can achieve photoconversion efficiencies exceeding 26%; however, performance-limiting defects that trap carriers continue to be a challenge. In this work, we have characterized Si solar cells with tunneling SiO x /polycrystalline-Si (poly-Si) passivating contacts (TOPCon) on As-doped Czochralski Si wafers with electrically detected magnetic resonance (EDMR) spectroscopy. We fabricated 2 × 20 mm 2 TOPCon-like mini solar cells with edge passivation alongside larger 4 cm 2 sister cells and obtained similar device characteristics. We performed EDMR spectroscopy at 300 K on two minicells with different degrees of surface passivation based on the recombination parameter, J o , values of 40 and 310 fA/cm2. We optimized the resolution and the signal-to-noise ratio of the EDMR response of the minicells by varying the forward bias voltage and the magnetic field modulation amplitude. We detect two distinct signals with EDMR spectroscopy, an axial-like signal at g = 2.009, 2.0087, and 2.0015, and an isotropic signal at g = 2.0024, which we attribute to Si dangling bonds (P b0 and P b centers) and boron–oxygen related defects, respectively, at or near the c-Si/SiO x interface. The EDMR signals were lower for the cell with a lower value of J o , while the ratio of the two defect populations was very similar. The EDMR signal increases with forward bias but drops to zero at bias voltages >0.5 V, consistent with interface defects within or near the boron-doped emitter depletion region. Our study demonstrates a method to fabricate minicells that can be characterized with EDMR spectroscopy to detect industrially relevant defects in TOPCon cells.

14 SOLAR ENERGY↗
DOE OSTI2025

Resistivity distribution and donor properties of antimony-doped n -type Czochralski silicon ingots

We investigate antimony (Sb)-doped Czochralski-grown silicon as an alternative n-type substrate for photovoltaic applications, and characterize their axial resistivity distribution, donor properties, and mechanical strength. We find that Sb-doped ingots can achieve a more uniform resistivity distribution along the axial direction compared to P-doped counterparts. Dopant concentration profiles in P-doped ingots can be accurately modelled using the standard Scheil's equation, accounting only for dopant segregation during solidification. In contrast, modelling Sb-doped ingots requires consideration of both dopant segregation and evaporation effects to fit the dopant distribution accurately. Using electron paramagnetic resonance spectroscopy at 9 K, we observe two hyperfine lines in P-doped samples, and six hyperfine lines for Sb 121 and eight for Sb 123 isotopes, with the number of hyperfine lines governed by the nuclear spins. We further identify two-atom Sb clustering in the Sb-doped wafers, confirmed through simulations of the additional weak electron paramagnetic resonance peaks. Finally, we find that 140 μm as-cut planar Sb-doped wafers exhibit slightly higher mechanical strength compared to P-doped wafers.

14 SOLAR ENERGY↗
DOE OSTI2025

Mechanistic and kinetic relevance of hydrogen and water in CO 2 hydrogenation on Cu-based catalysts

Here, we ally steady-state kinetics, kinetic isotope effects, and density functional theory (DFT) calculations to illustrate that Cu-based catalysts remain saturated by H-adatoms (H*) and molecular formic acid (HCOOH**) during CO 2 hydrogenation. High H* coverage under methanol synthesis conditions is evidenced by reverse water-gas shift (RWGS) rates that exhibit positive H 2 reaction orders only at P H2 ≲ 0.5 bar, above which methanol synthesis and RWGS rates exhibit first and zeroth order dependence on P H2 , respectively. HCOOH** also accumulates on the surface with increasing P CO2 as informed by the Langmuir-type dependence on P CO2 (0.25-23 bar) for both methanol synthesis and RWGS. As both HCOOH** and H* have one H-atom per site occupied, the two species share the same P H2 dependence and give rise to CO 2 reaction orders that are independent of P H2 . Surface coverages determined based on kinetic analyses are further corroborated with DFT-derived adsorption energies that show favorable HCOOH** adsorbate-adsorbate interactions as well as repulsive interactions for bidentate formate (HCOO**) on H*-saturated surfaces. Methanol selectivity remains invariant with P CO2 and P CO despite CO inhibiting reaction rates, thereby demonstrating methanol synthesis and RWGS occur on the same active site. In contrast, water preferentially inhibits methanol synthesis rates, increases methanol synthesis H 2 reaction order from 1.0 to 1.5, and alters the methanol synthesis H 2 /D 2 kinetic isotope effect; the inhibitory effect of H 2 O thus cannot be attributed to competitive adsorption alone and instead reflects a change in the rate-determining step for methanol synthesis. The disparate kinetics of methanol synthesis and RWGS evince a branching pathway where methanol is formed from formates and CO is formed from carboxylates. The presented work thus identifies the relevant surface species, underscores the distinct catalytic role of water in branching methanol synthesis and RWGS pathways, and, in doing so, details a mechanistic picture that yields predictable rates and reaction orders for both methanol synthesis and RWGS on Cu-based CO 2 hydrogenation catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A neural-network-enhanced parameter-varying framework for multi-objective model predictive control applied to buildings

Management of the electrical grid is becoming more complex due to the increased penetration of alternative energy generation technologies and a broadening diversity of electric loads. This complexity creates challenges in balancing demand and generation that can increase the potential for grid instabilities. One effective way to address this issue is to leverage previously unexploited demand flexibility through advanced control strategies. In this work, we propose an advanced control method, called adaptive neural parameter-varying model predictive control (ANPV-MPC), to control the temperature and energy consumption of a building via its Heating, Ventilation, and Air Conditioning system. ANPV-MPC combines key ideas in parameter-varying control, adaptive control, and online learning strategies to bridge the gap between computationally efficient linear model predictive control and more accurate nonlinear model predictive control. The novelty in ANPV-MPC is the use of a physics-inspired Bayesian neural network to estimate the coefficients of the parameter-varying linear control model. The Bayesian neural network additionally provides uncertainty estimates, triggering online training to capture evolving building system conditions. We show that ANPV-MPC can approximate the building system dynamics with a 28.39% higher accuracy than traditional linear model predictive control, resulting in 36.23% better control performance without increasing complexity of the optimal control problem. ANPV-MPC also adapts in real time to previously unseen conditions using online learning, further improving its performance.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Reduced order modeling of a fluidized bed particle receiver for concentrating solar power with thermal energy storage

Oxide particles can serve as both the heat transfer and thermal energy storage (TES) media for next-generation concentrating solar power (CSP) plants where high-temperature TES enables dispatchable electricity from efficient power cycles with firing temperatures above 600 °C. Transferring heat to flowing particles at such high temperatures in a MW-scale central tower receiver remains a challenge for the CSP community. For indirect receivers with external walls to contain the particles, maintaining wall temperatures below the limits of structural metal alloys requires high heat transfer coefficients between the wall and the moving particle stream. Bubbling fluidization of downward-flowing particles can sustain high bed-wall heat transfer coefficients (> 1000 W m -2 K -1 ). Using experimentally calibrated correlations for bed-wall heat transfer and vertical particle dispersion, this study implements an axially discretized zonal model of a counterflow fluidized bed receiver to explore how bubbling fluidization may enable indirect cavity particle receivers. High bed-wall heat transfer coefficients support solar fluxes on angled cavity walls > 200 kW m -2 at peak aperture fluxes of 980 kW m -2 while maintaining external wall temperatures < 950 °C. Lateral particle dispersion enables hotter particles near the receiver leading edge to mix with cooler particles further from the leading edge to lower maximum external wall temperatures. Parametric studies identify how mass fluxes, particle dispersion, and solar concentrations impact indirect receiver thermal efficiency and uniformity for a CSP plant. These studies provide a basis for the design of indirect fluidized-bed cavity receivers that can maintain particle outlet temperatures for TES above 750 °C.

14 SOLAR ENERGY↗
DOE OSTI2025

Understanding (La,Sr)(Co,Fe)O$_{3-δ}$ Phase Instability within SOECs Using a Combined Experimental and Atomistic Modeling Approach

Understanding the onset of degradation in the air electrode within solid oxide electrolysis cells (SOECs), and the subsequent impact on cell performance, is a critical step in mitigating the performance losses and stability issues of SOECs. In an effort to identify early onset degradation phenomena, SOECs were characterized as fabricated and after testing potentiostatically at 1.3 V for 1000 h at 750 °C. SOEC air electrodes composed of a 1:1 composite of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3–δ (6428-LSCF) and Gd 0.1 Ce 0.9 O 1.95 (GDC) were studied using synchrotron X-ray diffraction (XRD), scanning transmission electron microscopy coupled with energy dispersive X-ray spectroscopy (STEM-EDS), and X-ray absorption near-edge spectroscopy (XANES) to evaluate the changes in the air electrode structurally and chemically. These techniques show the migration of Sr species from the air electrode through pores in the GDC barrier layer, progressing to the electrolyte boundary, where it accumulates and reacts with (Zr 0.84 Y 0.16 )O 2–δ (YSZ) to form SrZrO 3 . Microscopy results are paired with atomistic simulations to better understand the relationship between the thermodynamic instability of 6428-LSCF and cell fabrication/testing conditions. First-principles calculations reveal that LSCF-6428 is not stable during cell manufacturing and testing conditions, which supports the experimental identification of secondary phases in both as-fabricated and tested cells. Together, these results demonstrate that the challenging environments encountered by SOECs during cell manufacturing and operation lead to instabilities of the target 6428-LSCF anode material and underscore the need for more durable, high-performing SOEC components.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Ferroelectric epitaxial Al(Sc/B)N/Mo/SiC heterostructures for high operating temperature devices

Advances in wurtzite nitride ferroelectrics of Al 1-x M x N (⁠ M = Sc or B) have led to novel capabilities, which must be integrated into existing fabrication processes. In the case of electronics operating > 200°C, a movement toward SiC-based platforms enables better performance over conventional Si, primarily due to the higher bandgap and lower intrinsic carrier concentration of SiC. Hence, the challenge is to develop a deposition process to integrate Al 1-x M x M x N ferroelectrics with elevated temperature-compatible materials for high temperature electronics such as the non-volatile memory component. We demonstrate epitaxial Al M N/Mo/SiC heterostructures, which provides both the crystalline and surface features that promote high-quality ferroelectric nitride film growth. Omega scans of the Mo (110) reflection exhibit a full width at half max of < 0.02° (40 arc sec) and the (0002) peak of the subsequently grown nitride film had a value of 1.1° for 160 nm thick Al 0.7 Sc 0.3 N and 1.3° for 400 nm thick Al 0.94 B 0.06 N. The crystallographic relationships found between the Al M N, Mo, and SiC layers indicate an advancement in sputter deposition of epitaxial films. Ferroelectric switching is also shown at 400 °C in both samples via polarization-electric field hysteresis and pulsed measurements, which exhibited P r values >100 μC cm -2 and E c between 3 and 4 M V cm -1 ⁠, despite a large presence of oxygen in both Al M N films ranging between 4 and 5 at.%, revealed by compositional analysis. This study demonstrates the process for synthesizing high-crystal quality ferroelectric nitride films, which can be used in extremely high temperature applications.

74 ATOMIC AND MOLECULAR PHYSICS↗