Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “regional modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

The analysis of temporal variations in regional models of the Sargasso Sea from GEOS-3 altimetry

The dense coverage of short pulse mode GEOS-3 altimeter data in the western North Atlantic provides a basis for studying time variations in the sea surface heights in the Sargasso Sea. Two techniques are utilized: the method of regional models, and the analysis of overlapping passes. An 88 percent correlation is obtained between the location of cyclonic eddies obtained from infrared imagery and sea surface height minima in the altimeter models. This figure drops to 59 percent in the case of correlations with maxima and minima of surface temperature fields. The analysis of overlapping passes provides a better picture of instantaneous sea state through wavelengths greater than 30 km. The variability of the Sargasso Sea through wavelengths between 150 km and 5000 km is estimated at + or - 28 cm. This value is in reasonable agreement with oceanographic estimates and is compatible with the eddy kinetic energy of a wind driven circulation.

Mather, R. S.↗
DOE OSTI2020

Distribution Development for the RDX Regional Model at Los Alamos National Laboratory - 20385

Representing uncertainty in model inputs often means finding a balance between uncertainty and physical reality. Developing wide distributions may seem conservative in principle, but this approach may lead to unrealistic model results. Characterizing the current state of knowledge of stochastic inputs presents many challenges, especially if the data available are limited or have limited relevance to the site. Relationships among these inputs may also be important to represent but are typically complex or difficult to define. Often special adjustments must be made to account for reduced credibility in particular data. If parameters are strongly related to one another, a correlation structure may be developed for input to the model. Other techniques such as regression models may be used to incorporate relationships between the information available and the desired parameters. The process of developing distributions must consider details of the model in terms of what the distribution is meant to represent. This paper uses the example of a probabilistic fate and transport model for hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) in the regional aquifer at Los Alamos National Laboratory (LANL). For many parameters, a single draw is applied to all space and time over which the model is run, for a single iteration. This simplification is often made for many reasons, and can often be beneficial, but also adds additional complexity in the distribution development process. Defining the distributional goals as they relate to the modeling process is an important step, which should take place prior to evaluation of the data. Usually, the distributions developed are meant to characterize the average value of the parameter over the spatial and temporal domain of the model. Distribution development requires consideration of many sources of information on the parameter where available, ideally from multiple references. Examples of different sources include data from different references but also from different conditions, measurement methods, or experimental types. Depending on these conditions and the reliability or relevance of particular references, different sources of data may each contribute valuable information but have varying relevance to the site. In these cases, weighting data unequally is a useful way to incorporate this information. As an example, aqueous dispersivity data are available for a variety of rock types. Only a few values are available for the desired rock type, and this is not enough to develop a distribution. Therefore, dispersivity values from other rock types are included in distribution development but are down-weighted such that the best data have the most influence on the distribution developed. In another case, K{sub d} distributions in the model are meant to represent a known composition of multiple soil types. Data from these materials are weighted accordingly to develop a distribution for the weighted average K{sub d} across soil types. Other cases include varying reliability of different sources, and weighting data according to the confidence in these sources. In some cases, input parameters are correlated with one another. An example is advective porosity, which is positively correlated with total porosity and must be less than total porosity. Paired data with both parameters must exist to discern the relationship between the two parameters and if it is necessary to build a correlation structure into the model. In general, correlated parameters may be represented in the model by a multivariate distribution, or perhaps more desirably, capturing the correlation within the developed distributions which may be treated as independent from one another. In the example of porosity, this can be done by transforming advective porosity into a proportion of total porosity which may be drawn independently from the distribution of total porosity. This paper explores how complex data and correlations can be incorporated to meet the distributional goals of the model, using the RDX regional model as a detailed example. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS2013

Downscaling Reanalysis over Continental Africa with a Regional Model: NCEP Versus ERA Interim Forcing

Five annual climate cycles (1998-2002) are simulated for continental Africa and adjacent oceans by a regional atmospheric model (RM3). RM3 horizontal grid spacing is 0.44deg at 28 vertical levels. Each of 2 simulation ensembles is driven by lateral boundary conditions from each of 2 alternative reanalysis data sets. One simulation downs cales National Center for Environmental Prediction reanalysis 2 (NCPR2) and the other the European Centre for Medium Range Weather Forecasts Interim reanalysis (ERA-I). NCPR2 data are archived at 2.5deg grid spacing, while a recent version of ERA-I provides data at 0.75deg spacing. ERA-I-forced simulations are recomrp. ended by the Coordinated Regional Downscaling Experiment (CORDEX). Comparisons of the 2 sets of simulations with each other and with observational evidence assess the relative performance of each downscaling system. A third simulation also uses ERA-I forcing, but degraded to the same horizontal resolution as NCPR2. RM3-simulated pentad and monthly mean precipitation data are compared to Tropical Rainfall Measuring Mission (TRMM) data, gridded at 0.5deg, and RM3-simulated circulation is compared to both reanalyses. Results suggest that each downscaling system provides advantages and disadvantages relative to the other. The RM3/NCPR2 achieves a more realistic northward advance of summer monsoon rains over West Africa, but RM3/ERA-I creates the more realistic monsoon circulation. Both systems recreate some features of JulySeptember 1999 minus 2002 precipitation differences. Degrading the resolution of ERA-I driving data unrealistically slows the monsoon circulation and considerably diminishes summer rainfall rates over West Africa. The high resolution of ERA-I data, therefore, contributes to the quality of the downscaling, but NCPR2laterai boundary conditions nevertheless produce better simulations of some features.

Reanalysis↗
NASA NTRS2014

The Impact of the Atlantic Cold Tongue on West African Monsoon Onset in Regional Model Simulations for 1998-2002

The Atlantic cold tongue (ACT) develops during spring and early summer near the Equator in the Eastern Atlantic Ocean and Gulf of Guinea. The hypothesis that the ACT accelerates the timing of West African monsoon (WAM) onset is tested by comparing two regional climate model (RM3) simulation ensembles. Observed sea surface temperatures (SST) that include the ACT are used to force a control ensemble. An idealized, warm SST perturbation is designed to represent lower boundary forcing without the ACT for the experiment ensemble. Summer simulations forced by observed SST and reanalysis boundary conditions for each of five consecutive years are compared to five parallel runs forced by SST with the warm perturbation. The article summarizes the sequence of events leading to the onset of the WAM in the Sahel region. The representation of WAM onset in RM3 simulations is examined and compared to Tropical Rainfall Measuring Mission (TRMM), Global Precipitation Climatology Project (GPCP) and reanalysis data. The study evaluates the sensitivity of WAM onset indicators to the presence of the ACT by analysing the differences between the two simulation ensembles. Results show that the timing of major rainfall events and therefore theWAM onset in the Sahel are not sensitive to the presence of the ACT. However, the warm SST perturbation does increase downstream rainfall rates over West Africa as a consequence of enhanced specific humidity and enhanced northward moisture flux in the lower troposphere.

Regional model simulation↗
NASA NTRS1991

Testing of transition-region models: Test cases and data

Mean flow quantities in the laminar turbulent transition region and in the fully turbulent region are predicted with different models incorporated into a 3-D boundary layer code. The predicted quantities are compared with experimental data for a large number of different flows and the suitability of the models for each flow is evaluated.

Singer, Bart A.↗
DOE OSTI2020

Modeling regional precipitation over the Indus River basin of Pakistan using statistical downscaling

Complex processes govern spatiotemporal distribution of precipitation within the high-mountainous headwater regions (commonly known as the upper Indus basin (UIB)), of the Indus River basin of Pakistan. Reliable precipitation simulations particularly over the UIB present a major scientific challenge due to regional complexity and inadequate observational coverage. Here, we present a statistical downscaling approach to model observed precipitation of the entire Indus basin, with a focus on UIB within available data constraints. Taking advantage of recent high altitude (HA) observatories, we perform precipitation regionalization using K-means cluster analysis to demonstrate effectiveness of low-altitude stations to provide useful precipitation inferences over more uncertain and hydrologically important HA of the UIB. We further employ generalized linear models (GLM) with gamma and Tweedie distributions to identify major dynamic and thermodynamic drivers from a reanalysis dataset within a robust cross-validation framework that explain observed spatiotemporal precipitation patterns across the Indus basin. Final statistical models demonstrate higher predictability to resolve precipitation variability over wetter southern Himalayans and different lower Indus regions, by mainly using different dynamic predictors. The modeling framework also shows an adequate performance over more complex and uncertain trans-Himalayans and the northwestern regions of the UIB, particularly during the seasons dominated by the westerly circulations. However, the cryosphere-dominated trans-Himalayan regions, which largely govern the basin hydrology, require relatively complex models that contain dynamic and thermodynamic circulations. Furthermore, we also analyzed relevant atmospheric circulations during precipitation anomalies over the UIB, to evaluate physical consistency of the statistical models, as an additional measure of reliability. Overall, our results suggest that such circulation-based statistical downscaling has the potential to improve our understanding towards distinct features of the regional-scale precipitation across the upper and lower Indus basin. Additionally, such understanding should help to assess the response of this complex, data-scarce, and climate-sensitive river basin amid future climatic changes, to serve communal and scientific interests.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1999

Response to CO2 Transient Increase in the GISS Coupled Model: Regional Coolings in a Warming Climate

The (GISS) Goddard Institute for Space Studies coupled atmosphere-ocean model is used to investigate the effect of increased atmospheric CO2 by comparing a compounded 1 percent CO2 increase experiment with a control simulation. After 70 years of integration, the global surface air temperature in the 1 percent CO2 experiment is 1.43 C warmer. In spite of this global warming, there are two distinct regions, the northern Atlantic Ocean and the southern Pacific Ocean, where the surface air temperature is up to 4 C cooler. This situation is maintained by two positive feedbacks: a local effect on convection in the South Pacific and a non-local impact on the meridional circulation in the North Atlantic. The poleward transport of latent energy and dry static energy by the atmosphere is greater in the 1 percent CO2 experiment, caused by warming and therefore increased water vapor and greater greenhouse capacity at lower latitudes. The larger atmospheric transports tend to reduce upward vertical fluxes of heat and moisture from the ocean surface at high latitudes, which has the effect of stabilizing the ocean, reducing both convection and the thermohaline circulation. With less convection, less warm water is brought up from below, and with a reduced North Atlantic thermohaline circulation (by 30 percent at time of CO2 doubling), the poleward energy transport by the oceans decreases. The colder water then leads to further reductions in evaporation, decreases of salinity at high latitudes, continued stabilization of the ocean, and maintenance of reduced convection and meridional overturning. Although sea ice decreases globally, it increases in the cooling regions which reduces the overall climate sensitivity; its effect is most pronounced in the Southern Hemisphere. Tropical warming has been observed over the past several decades; if modeling studies such as this and others which have produced similar effects are valid, these processes may already be beginning.

Russell, Gary L.↗
DOE OSTI2023

Scaling from Flux Towers to Ecosystem Models: Regional Constraints on Carbon Cycle Processes from Atmospheric Carbonyl Sulfide (Final Report)

DOE supported research suggests that gross primary productivity (GPP) is largely underestimated by global earth system models [Welp et al., 2011], reflecting the persistent challenge in extrapolating from local-scale GPP observations to global-scale earth system models. This poor understanding of GPP at large spatial scales is of particular concern in tropical forests. In tropical forests, some earth systems models forecast a powerful feedback between a warming climate and a decline in GPP resulting in forest dieback. While this simulated feedback is intensely debated, we lack robust large-scale constraints on GPP that are needed to resolve this debate. In particular, carbon dioxide measurements provide valuable information on net carbon flux, but not on the gross flux associated with GPP. Here we conducted a study of regional-to-global scale GPP using atmospheric carbonyl sulfide to provide a new constraint on GPP mechanisms in earth system models. Our project activities integrated modeling, in situ measurement, and remote sensing techniques to resolve GPP for the Amazon as well as global scale trends. The results of this work included initiating airborne carbonyl sulfide monitoring in the Amazon, training for postdocs and graduate students at a Hispanic Serving Institution, fundamental advances in carbonyl sulfide budgets [e.g. Hilton et al., Nature Climate Change, 2017], and high-profile publications that focused on GPP trends for the Amazon [Stinecipher et al., GRL, 2022] and global historical GPP trends [Campbell, et al., Nature, 2017]. Based on the suggestion of our DOE program manager, we published a state-of-the-science commentary to the scientific community on GPP monitoring with COS [Campbell et al., EOS, 2017] which was selected as the cover story. DOE support was acknowledged in all reports. The importance of this research to understanding climate change was communicated to the general public through community seminars (Rotary, Public Libraries, State Parks), an op-ed (SF Chronicle), and interviews in the mass media including two stories in the New York Times (4/5/17; 7/30/18), one of which was especially widely read after it was featured in the New York Time’s Quote of the Day.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2010

Advances in Landslide Hazard Forecasting: Evaluation of Global and Regional Modeling Approach

A prototype global satellite-based landslide hazard algorithm has been developed to identify areas that exhibit a high potential for landslide activity by combining a calculation of landslide susceptibility with satellite-derived rainfall estimates. A recent evaluation of this algorithm framework found that while this tool represents an important first step in larger-scale landslide forecasting efforts, it requires several modifications before it can be fully realized as an operational tool. The evaluation finds that the landslide forecasting may be more feasible at a regional scale. This study draws upon a prior work's recommendations to develop a new approach for considering landslide susceptibility and forecasting at the regional scale. This case study uses a database of landslides triggered by Hurricane Mitch in 1998 over four countries in Central America: Guatemala, Honduras, EI Salvador and Nicaragua. A regional susceptibility map is calculated from satellite and surface datasets using a statistical methodology. The susceptibility map is tested with a regional rainfall intensity-duration triggering relationship and results are compared to global algorithm framework for the Hurricane Mitch event. The statistical results suggest that this regional investigation provides one plausible way to approach some of the data and resolution issues identified in the global assessment, providing more realistic landslide forecasts for this case study. Evaluation of landslide hazards for this extreme event helps to identify several potential improvements of the algorithm framework, but also highlights several remaining challenges for the algorithm assessment, transferability and performance accuracy. Evaluation challenges include representation errors from comparing susceptibility maps of different spatial resolutions, biases in event-based landslide inventory data, and limited nonlandslide event data for more comprehensive evaluation. Additional factors that may improve algorithm performance accuracy include incorporating additional triggering factors such as tectonic activity, anthropogenic impacts and soil moisture into the algorithm calculation. Despite these limitations, the methodology presented in this regional evaluation is both straightforward to calculate and easy to interpret, making results transferable between regions and allowing findings to be placed within an inter-comparison framework. The regional algorithm scenario represents an important step in advancing regional and global-scale landslide hazard assessment and forecasting.

Kirschbaum, Dalia B.↗
NASA NTRS2011

Advances in Landslide Nowcasting: Evaluation of a Global and Regional Modeling Approach

The increasing availability of remotely sensed data offers a new opportunity to address landslide hazard assessment at larger spatial scales. A prototype global satellite-based landslide hazard algorithm has been developed to identify areas that may experience landslide activity. This system combines a calculation of static landslide susceptibility with satellite-derived rainfall estimates and uses a threshold approach to generate a set of nowcasts that classify potentially hazardous areas. A recent evaluation of this algorithm framework found that while this tool represents an important first step in larger-scale near real-time landslide hazard assessment efforts, it requires several modifications before it can be fully realized as an operational tool. This study draws upon a prior work s recommendations to develop a new approach for considering landslide susceptibility and hazard at the regional scale. This case study calculates a regional susceptibility map using remotely sensed and in situ information and a database of landslides triggered by Hurricane Mitch in 1998 over four countries in Central America. The susceptibility map is evaluated with a regional rainfall intensity duration triggering threshold and results are compared with the global algorithm framework for the same event. Evaluation of this regional system suggests that this empirically based approach provides one plausible way to approach some of the data and resolution issues identified in the global assessment. The presented methodology is straightforward to implement, improves upon the global approach, and allows for results to be transferable between regions. The results also highlight several remaining challenges, including the empirical nature of the algorithm framework and adequate information for algorithm validation. Conclusions suggest that integrating additional triggering factors such as soil moisture may help to improve algorithm performance accuracy. The regional algorithm scenario represents an important step forward in advancing regional and global-scale landslide hazard assessment.

Kirschbaum, Dalia Bach↗
NASA NTRS1992

Transition region modeling for compressible flow

The ongoing effort at NASA Langley Research Center aimed at developing transitional zone models for Reynolds-averaged Navier-Stokes calculations is described. Results from three models that we have examined - two zero-equation models and a two-equation model of the k-omega type - are presented for high-speed flows. The use of analytical and computational tools to provide guidance and to provide the transitional flow-field data bases necessary to develop such models is discussed. Some results from validation of these tools are given; qualitative comparisons between modeled and theoretical/computational representations of the transitional zone are provided.

Chang, C.-L.↗
NASA NTRS2015

Spatial and Temporal Variability of Trace Gas Columns Derived from WRF/Chem Regional Model Output: Planning for Geostationary Observations of Atmospheric Composition

We quantify both the spatial and temporal variability of column integrated O3, NO2, CO, SO2, and HCHO over the Baltimore / Washington, DC area using output from the Weather Research and Forecasting model with on-line chemistry (WRF/Chem) for the entire month of July 2011, coinciding with the first deployment of the NASA Earth Venture program mission Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ). Using structure function analyses, we find that the model reproduces the spatial variability observed during the campaign reasonably well, especially for O3. The Tropospheric Emissions: Monitoring of Pollution (TEMPO) instrument will be the first NASA mission to make atmospheric composition observations from geostationary orbit and partially fulfills the goals of the Geostationary Coastal and Air Pollution Events (GEO-CAPE) mission. We relate the simulated variability to the precision requirements defined by the science traceability matrices of these space-borne missions. Results for O3 from 0- 2 km altitude indicate that the TEMPO instrument would be able to observe O3 air quality events over the Mid-Atlantic area, even on days when the violations of the air quality standard are not widespread. The results further indicated that horizontal gradients in CO from 0-2 km would be observable over moderate distances (≥ 20 km). The spatial and temporal results for tropospheric column NO2 indicate that TEMPO would be able to observe not only the large urban plumes at times of peak production, but also the weaker gradients between rush hours. This suggests that the proposed spatial and temporal resolutions for these satellites as well as their prospective precision requirements are sufficient to answer the science questions they are tasked to address.

TEMPO↗
NASA NTRS2017

Development of High-Resolution Dynamic Dust Source Function - A Case Study with a Strong Dust Storm in a Regional Model

A high-resolution dynamic dust source has been developed in the NASA Unified-Weather Research and Forecasting (NU-WRF) model to improve the existing coarse static dust source. In the new dust source map, topographic depression is in 1-km resolution and surface bareness is derived using the Normalized Difference Vegetation Index (NDVI) data from Moderate Resolution Imaging Spectroradiometer (MODIS). The new dust source better resolves the complex topographic distribution over the Western United States where its magnitude is higher than the existing, coarser resolution static source. A case study is conducted with an extreme dust storm that occurred in Phoenix, Arizona in 0203 UTC July 6, 2011. The NU-WRF model with the new high-resolution dynamic dust source is able to successfully capture the dust storm, which was not achieved with the old source identification. However the case study also reveals several challenges in reproducing the time evolution of the short-lived, extreme dust storm events.

Dynamic dust source↗