Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “recent availability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Polarization-induced 2D hole gases in pseudomorphic undoped GaN/AlN heterostructures on single-crystal AlN substrates

A high-conductivity two-dimensional (2D) hole gas is the enabler of wide-bandgap p-channel transistors. Compared to commonly used AlN template substrates with high dislocation densities, the recently available single-crystal AlN substrates are promising to boost the speed and power handling capability of p-channel transistors based on GaN/AlN 2D hole gases (2DHGs) thanks to the much lower dislocation densities and the absence of thermal boundary resistance. Using plasma-assisted molecular beam epitaxy, we report the observation of polarization-induced high-density 2DHGs in undoped pseudomorphic GaN/AlN heterostructures on the single-crystal AlN substrates with high structural quality and atomic steps on the surface. The high-density 2DHG persists down to cryogenic temperatures with a record high mobility exceeding 280 cm 2 /V s and a density of 2.2 × 10 13 /cm 2 at 10 K. These results shed light on aspects of improving 2D hole mobilities and indicate significant potential of GaN/AlN 2DHG grown on bulk AlN substrates for future high performance wide-bandgap p-channel transistors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electronic properties of corundum-like Ir 2 O 3 and Ir 2 O 3 -Ga 2 O 3 alloys

In the hexagonal, corundum-like structure, α-Ga 2 O 3 has a bandgap of ~5.1 eV, which, combined with its relatively small electron effective mass, high Baliga's figure of merit, and high breakdown field, makes it a promising candidate for power electronics. Ga 2 O 3 is easy to dope n-type, but impossible to dope p-type, impeding the realization of some electronic device designs. Developing a lattice-matched p-type material that forms a high-quality heterojunction with n-type Ga 2 O 3 would open new opportunities in electronics and perhaps optoelectronic devices. In this work, we studied Ir 2 O 3 as a candidate for that purpose. Using hybrid density functional theory calculations we predict the electronic band structure of α-Ir 2 O 3 and compare that to α-Ga 2 O 3 , and study the stability and electronic properties of α-(Ir x Ga 1–x ) 2 O 3 alloys. We discuss the band offset between the two materials and compare it with recently available experimental data. We find that the Ir d bands that compose the top of the valence band in α-Ir 2 O 3 are much higher in energy than O p bands in α-Ga 2 O 3 , possibly enabling effective p-type doping. Finally, our results provide an insight into using the Ir 2 O 3 or Ir 2 O 3 -Ga 2 O 3 alloys as p-type material lattice-matched to α-Ga 2 O 3 for the realization of p–n heterojunctions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Laser cutting apparatus for high energy density and diamond anvil cell science

In this paper, we present a low-cost, high-resolution laser cutting system designed for use in the fabrication of samples for high energy density physics. Such samples are necessarily small but require precision and repeatability, particularly with the recently available high repetition rates possible at modern facilities. The system allows simultaneous laser cutting, using nanosecond near-infrared laser pulses, and optical microscopy so that the cut can be monitored in real time. The capabilities of the system are demonstrated on a range of materials for both laser-matter interaction targets and components for high pressure diamond anvil cell experiment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Genomic Signatures of a Major Adaptive Event in the Pathogenic Fungus Melampsora larici-populina

The recent availability of genome-wide sequencing techniques has allowed systematic screening for molecular signatures of adaptation, including in nonmodel organisms. Host–pathogen interactions constitute good models due to the strong selective pressures that they entail. We focused on an adaptive event which affected the poplar rust fungus Melampsora larici-populina when it overcame a resistance gene borne by its host, cultivated poplar. Based on 76 virulent and avirulent isolates framing narrowly the estimated date of the adaptive event, we examined the molecular signatures of selection. Using an array of genome scan methods based on different features of nucleotide diversity, we detected a single locus exhibiting a consistent pattern suggestive of a selective sweep in virulent individuals (excess of differentiation between virulent and avirulent samples, linkage disequilibrium, genotype–phenotype statistical association, and long-range haplotypes). Our study pinpoints a single gene and further a single amino acid replacement which may have allowed the adaptive event. Although our samples are nearly contemporary to the selective sweep, it does not seem to have affected genome diversity further than the immediate vicinity of the causal locus, which can be explained by a soft selective sweep (where selection acts on standing variation) and by the impact of recombination in mitigating the impact of selection. Therefore, it seems that properties of the life cycle of M. larici-populina, which entails both high genetic diversity and outbreeding, has facilitated its adaptation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

A unified exploration of the chronology of the Galaxy

The Milky Way has distinct structural stellar components linked to its formation and subsequent evolution, but disentangling them is non-trivial. With the recent availability of high-quality data for a large numbers of stars in the Milky Way, it is a natural next step for research in the evolution of the Galaxy to perform automated explorations with unsupervised methods of the structures hidden in the combination of large-scale spectroscopic, astrometric, and asteroseismic data sets. We determine precise stellar properties for 21 076 red giants, mainly spanning 2–15 kpc in Galactocentric radii, making it the largest sample of red giants with measured asteroseismic ages available to date. We explore the nature of different stellar structures in the Galactic disc by using Gaussian mixture models as an unsupervised clustering method to find substructure in the combined chemical, kinematic, and age subspace. The best-fitting mixture model yields four distinct physical Galactic components in the stellar disc: the thin disc, the kinematically heated thin disc, the thick disc, and the stellar halo. We find hints of an age asymmetry between the Northern and Southern hemisphere, and we measure the vertical and radial age gradient of the Galactic disc using the asteroseismic ages extended to further distances than previous studies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Internal energy balance and aerodynamic heating predictions for hypersonic turbulent boundary layers

The elemental equation governing heat transfer in aerodynamic flows is the internal energy equation. For a boundary layer flow, a double integration of the Reynolds-averaged form of this equation provides an expression of the wall heat flux in terms of the integrated effects, over the boundary layer, of various physical processes: turbulent dissipation, mean dissipation, turbulent heat flux, etc. Recently available direct numerical simulation data for a Mach 11 cold-wall turbulent boundary layer allows a comparison of the exact contributions of these terms in the energy equation to the wall heat flux with their counterparts modeled in the Reynolds-averaged Navier-Stokes (RANS) framework. Various approximations involved in RANS, both closure models as well as approximations involved in adapting incompressible RANS models to a compressible form, are assessed through examination of the internal energy balance. There are a number of potentially problematic assumptions and terms identified through this analysis. Here, the effect of compressibility corrections of the dilatational dissipation type is explored, as is the role of the modeled turbulent dissipation, in the context of wall heat flux predictions. The results indicate several potential avenues for RANS model improvement for hypersonic cold-wall boundary-layer flows.

42 ENGINEERING↗
DOE OSTI2023

Effect of image resolution on automated classification of chest X-rays

Deep learning (DL) models have received much attention lately for their ability to achieve expert-level performance on the accurate automated analysis of chest X-rays (CXRs). Recently available public CXR datasets include high resolution images, but state-of-the-art models are trained on reduced size images due to limitations on graphics processing unit memory and training time. As computing hardware continues to advance, it has become feasible to train deep convolutional neural networks on high-resolution images without sacrificing detail by downscaling. This study examines the effect of increased resolution on CXR classification performance. We used the publicly available MIMIC-CXR-JPG dataset, comprising 377,110 high resolution CXR images for this study. We applied image downscaling from native resolution to 2048 × 2048 pixels, 1024 × 1024 pixels, 512 × 512 pixels, and 256 × 256 pixels and then we used the DenseNet121 and EfficientNet-B4 DL models to evaluate clinical task performance using these four downscaled image resolutions. We find that while some clinical findings are more reliably labeled using high resolutions, many other findings are actually labeled better using downscaled inputs. We qualitatively verify that tasks requiring a large receptive field are better suited to downscaled low resolution input images, by inspecting effective receptive fields and class activation maps of trained models. Lastly, we show that stacking an ensemble across resolutions outperforms each individual learner at all input resolutions while providing interpretable scale weights, indicating that diverse information is extracted across resolutions.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Identifying Meteorological Drivers for Errors in Modeled Winds along the Northern California Coast

Abstract An accurate wind resource dataset is required for assessing the potential energy yield of floating offshore wind farms that are expected along the California outer continental shelf. The National Renewable Energy Laboratory has developed and disseminated an updated wind resource dataset offshore of California, using the Weather Research and Forecasting Model, referred to as the CA20 dataset. As compared to buoy lidar measurements that have become available recently, the CA20 dataset showed significant positive biases for 100-m wind speeds along Northern California wind energy lease areas. To investigate the meteorological drivers for the model errors, we first consider two 1-yr simulations run with two different planetary boundary layer (PBL) parameterizations: the Mellor–Yamada–Nakanishi–Niino (MYNN) PBL scheme (the chosen configuration in the CA20 dataset) and the Yonsei University PBL scheme (which significantly reduces the bias in modeled winds). By comparing the 1-yr simulations to the concurrent lidar buoy observations, we find that errors are larger with the MYNN PBL scheme in warm seasons. We then dive deeper into the analysis by running simulations for short-term (3-day) case studies to evaluate the sensitivity of initial/boundary condition forcings on model results. By analyzing the short-term simulations, we find that during synoptic-scale northerly flows driven by the North Pacific high and inland thermal low, a coastal warm bias in the MYNN simulation is mainly responsible for the modeled wind speed bias by altering the boundary layer thermodynamics. The results of our analysis will help guide the creation of an updated version of the CA20 dataset.

17 WIND ENERGY↗
DOE OSTI2023

Field Demonstration of the Brick Ontology to Scale up the Deployment of ASHRAE Guideline 36 Control Sequences

Many commercial buildings have a vast network of sensors as part of their building automation systems (BAS) that allows opportunities for energy consumption and cost savings by deploying advanced control sequences. However, this resource is often underutilized since BAS are typically programmed with simple control sequences with limited potential to deliver on these opportunities. The recent availability of ASHRAE Guideline 36 (G36) with advanced HVAC control sequences supports control retrofits in existing buildings to unlock much of the savings potential. However, barriers such as the lack of standard naming convention of building assets and data points, proprietary equipment and BAS, and the inherent uniqueness of buildings and their systems prevent building stakeholders from adopting any “plug-and-play” implementation of G36. Instead, control vendors must often undertake the manual and labor-intensive point mapping process to identify a data stream’s functional and spatial relationship within the HVAC system along with other relevant contexts and map it to the new control sequences. The vendor must carry out the point mapping process in each individual building since the mapping is unlikely to port over to another building. Even for the same building, the point mapping process can occur multiple times if various control vendors implement different control retrofits and/or multiple control retrofits happen over the lifecycle of the building. Then, there is the likelihood that G36 control sequences are programmed uniquely to the building, preventing the same implementation from being reused in another. Therefore, this paper presents a field demonstration of how we leveraged the Brick ontology with BACnet, OpenBuildingControl’s Control Description Language (CDL), and open-source support tools to implement scalable and portable advanced building controls. These tools provide standardized semantic descriptions and relationships of the building’s assets and data points (Brick), standardized communication protocol to read from and write to the building’s BAS (BACnet), and standardized code implementations (CDL) of standardized advanced control strategies (G36). We implemented G36’s hot water supply temperature setpoint reset in a Berkeley, CA building for this field demonstration. This field demonstration aims to show how integrating these tools may streamline the deployment of advanced control sequences such as G36 in a consistent manner regardless of differences found across buildings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Spatial Transferability of Machine Learning Based Volume Estimation Models

High-quality traffic volume data is essential for efficient transportation planning and operations. However, such high-quality data is expensive to collect, owing primarily to the high capital cost of installing and maintaining continuous counting stations (CCSs). Recent availability of probe-based vehicle data offers a cost-effective solution for increasing the observability of traffic volumes. However, having ample ground truth traffic data is a prerequisite for developing robust volume estimation models. Though this might not be a big issue in many states, states with scarce CCS data might be able to benefit from robust volume estimation models developed in (adjacent) data-rich states. While there is a reasonable amount of spatial transferability research in the transportation domain, there is a dearth of knowledge on the spatial transferability of probe-based volume estimation models. To address this gap, this paper explores spatial transferability of volume estimation models developed from data in three states (Colorado, North Carolina, and Pennsylvania). Results indicate that it is extremely important to maintain temporal consistency when attempting spatial transferability of volume estimation models. It was also found that models trained on regions with lower peak traffic volumes will limit the performance of models transferred to states with higher peak hourly traffic volumes. Corroborating findings from existing spatial transferability research on other topics, it was found that a meta-model (developed using data from multiple states) performs better than volume estimation models developed within any one of the states.

ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Southern Hemisphere dominates recent decline in global water availability

Global land water underpins livelihoods, socioeconomic development, and ecosystems. It remains unclear how water availability has changed in recent decades. Using an ensemble of observations, we quantified global land water availability over the past two decades. We show that the Southern Hemisphere has dominated the declining trend in global water availability from 2001 to 2020. The significant decrease occurs mainly in South America, southwestern Africa, and northwestern Australia. In the Northern Hemisphere, the complex regional increasing and decreasing trends cancel each other, resulting in a negligible hemispheric trend. The variability and trend in water availability in the Southern Hemisphere are largely driven by precipitation associated with climate modes, particularly the El Niño-Southern Oscillation. Finally, this study highlights their dominant role in controlling global water availability.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

OpenACC unified programming environment for GPU and FPGA multi-hybrid acceleration

Attached accelerators have been frequently used in recent High Per- formance Computing (HPC) systems because of their high performance/power ratio. In particular, the Graphics Processing Unit (GPU) is the most popu- lar accelerator owing to its high peak FLOPS performance and high memory bandwidth supported by HBM2, etc. However, the performance of GPU depends highly on a large degree of SIMD parallelism and has difficulty sustaining a high performance on programs with frequent branch operations or a partially low degree of parallelism.By contrast, a Field Programmable Gate Array (FPGA) has received attention as a different type of accelerator than GPU as a fully reconfigurable processor fitting the target applications. The high performance of FPGA is mainly provided by a pipelined operation and optimized circuit suitable for any operation even with frequent conditional branches. We have been focusing on the flexibility of FPGA to compensate for the weakness of GPU. We believe that the coupling of GPU with FPGA can result in one of the most powerful accelerating platforms available.However, the program coding of GPU and FPGA coupling can be quite difficult for application users. Traditionally, CUDA by NVIDIA has been the most popular programming language with the largest share of GPUs used in HPC, whereas a hardware description language such as Verilog HDL has been used in FPGA programming. OpenCL coding has recently become available even on high-end FPGAs. Moreover, several recent studies have also enabled the OpenACC coding for use in FPGA. In this study, we provide a unified programming system based on OpenACC for a platform equipped with both GPU and FPGA aiming at the next-generation accelerated supercomputer framework. Our programming environment is called Multi-Hybrid OpenACC Translator (MHOAT), and in this paper, we describe the basic concept and prototype system of MHOAT based on an evaluation on the amount of coding required and the performance of a hybrid multi-device accelerated system.

Tsunashima, Ryuta↗
DOE OSTI2020

Characterization of 244 Cm Neutron Sources

There is a need to find a replacement for the 252 Cf sources currently used in Standards-based performance testing of neutron instrumentation. This is a result of its relatively short half-life, concerns about future availability and recent increases in cost. A potential replacement source, 244 Cm is evaluated in this study where two commercially available sources have been acquired and their neutron emission spectra measured using a pair of spectrometers. Both instruments showed the 244 Cm spontaneous neutron spectrum to be fully consistent with a MCNP6®-calculated spectrum using published Watt fission parameters for 244 Cm. In addition, the emission rate of the weaker 244 Cm source was established through a direct count rate comparison against a calibrated and similarly encapsulated 252 Cf source. The 244 Cm source emission rate was found to be in excellent agreement with value stated on the manufacturer's source certificate. It is concluded that 244 Cm would be an ideal replacement for 252 Cf based on its longer half-life (18.1 y) and its essentially identical neutron emission spectrum. In addition, 244 Cm sources are commercially available at reasonable cost.

244Cm↗
DOE OSTI2023

Comparison and multi-model inference of excess risks models for radiation-related solid cancer

In assessments of detrimental health risks from exposures to ionising radiation, many forms of risk to dose–response models are available in the literature. The usual practice is to base risk assessment on one specific model and ignore model uncertainty. The analysis illustrated here considers model uncertainty for the outcome all solid cancer incidence, when modelled as a function of colon organ dose, using the most recent publicly available data from the Life Span Study on atomic bomb survivors of Japan. Seven recent publications reporting all solid cancer risk models currently deemed plausible by the scientific community have been included in a model averaging procedure so that the main conclusions do not depend on just one type of model. The models have been estimated with different baselines and presented for males and females at various attained ages and ages at exposure, to obtain specially computed model-averaged Excess Relative Risks (ERR) and Excess Absolute Risks (EAR). Monte Carlo simulated estimation of uncertainty on excess risks was accounted for by applying realisations including correlations in the risk model parameters. Three models were found to weight the model-averaged risks most strongly depending on the baseline and information criteria used for the weighting. Fitting all excess risk models with the same baseline, one model dominates for both information criteria considered in this study. Based on the analysis presented here, it is generally recommended to take model uncertainty into account in future risk analyses.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2021

Future Automotive Systems Technology Simulator (FASTSim) Validation Report - 2021

The National Renewable Energy Laboratory's Future Automotive Systems Technology Simulator (FASTSim) captures the most important factors influencing vehicle power demands and performs large-scale fuel efficiency calculations very quickly. These features make FASTSim well suited to evaluate a representative distribution of real-world fuel efficiency over a large quantity of in-use driving profiles, which have become increasingly available in recent years owing to incorporation of Global Positioning System data collection into various travel surveys and studies. In addition, by being open source, computationally lightweight, freely available, and free from expensive third-party software requirements, analyses conducted using FASTSim may be easily replicated and critiqued in an open forum. This is highly desirable for situations in which technical experts seek to reach consensus over questions about what vehicle development plans or public interest strategies could maximize fuel savings and minimize adverse environmental impacts with an evolving vehicle fleet. While FASTSim continues to be refined and improved on an ongoing basis, this report compiles available runs using versions of the tool from the past few years to provide illustrative comparisons of the model results against measured data.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

A data-driven global soil heterotrophic respiration dataset and the drivers of its inter-annual variability

Soil heterotrophic respiration (SHR), one of the primary carbon fluxes from terrestrial ecosystems to the atmosphere, is important for carbon-climate feedbacks because of its sensitivity to available litter and soil carbon, climatic conditions, and nutrient availability. However, until recently limited SHR data were available, and most published global SHR estimates have either a short time span, coarse spatial resolution, or reply on overly-simple model formulations. To better understand and quantify the global distribution of SHR and its sensitivity to climate variability, we produced a new global SHR dataset using Random Forest algorithms, up-scaling 455 point data from the Global Soil Respiration Database (SRDB 4.0) with gridded fields of climatic, edaphic and productivity as explanatory variables. We estimated a global total SHR of 46.8 Pg C yr-1 over 1985-2013 (95% confidence interval: 38.6-56.3 Pg C yr-1), with a significant increasing trend of 0.03 Pg C yr-2 during this period. We found that the choice of soil moisture datasets contributes more to the difference among these data-driven SHR members rather than that of productivity, temperature and precipitation data sources. We also analyzed the influence of climatic variables on the inter-annual variability (IAV) of our SHR product. Water availability was the dominant driver of IAV at global scales, although the inferred sensitivity depends on the choice of the soil moisture gridded dataset. At the ecosystem scale, temperature strongly controls the IAV of SHR in tropical forests, while water availability dominates in extra-tropical forest and semi-arid regions. Our machine-learning gridded SHR dataset and outputs from process-based land surface models (TRENDYv6) show agreement for a strong association between water variability and SHR IAV at the global scale, but the two approaches lead to different temporal trend globally and different controlling variables for IAV at the ecosystem scale. Our study provides evidence for the pervasive and important role of water availability in driving SHR, indicating both a direct effect limiting decomposition rates and an indirect effect through the amount of fresh organic matter made available to SHR from productivity. In consideration of potential limitations and uncertainties remaining in our data-driven SHR datasets, we call for a more scientifically designed observation network for SHR, more observation data compilation, and increased use of deep learning methods making maximum use of observation data in hand. This will benefit process-based models, and improve our understanding of SHR response to future anomalous environmental conditions.

Yao, Yitong↗
DOE OSTI2024

Available DT fusion neutron sources

For consideration for diagnostic and technology development for a deuterium and tritium (DT) fusion system, we briefly list here the available DT fusion systems, their characteristic information, such as yields, flux, the pulse width, rep rate and approximate spectrum. We also briefly list other neutron sources for comparison. This is not meant to be exhaustive but a sampling of recent and available sources.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Alternative Fueling Station Locations

Alternative fueling stations are located throughout the United States and Canada, and their availability continues to grow. The Alternative Fuels Data Center (AFDC) maintains a website where you can find alternative fueling stations near you or on a route, obtain counts of alternative fueling stations by state, view maps, and more. The most recent dataset available for download here provides a "snapshot" of the alternative fueling station information for compressed natural gas (CNG), ethanol (E85), propane/liquefied petroleum gas (LPG), biodiesel (B20 and above), electric vehicle charging, hydrogen, and liquefied natural gas (LNG), as of July 29, 2021.

alt fuel↗