SEARCH · Engineering Papers

Results for “recent availability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Response of terrestrial microorganisms to a simulated Martian environment

Soil samples from Cape Canaveral were subjected to a simulated Martian environment and assayed periodically over 45 days to determine the effect of various environmental parameters on bacterial populations. The simulated environment was based on the most recent available data, prior to the Viking spacecraft, describing Martian conditions and consisted of a pressure of 7 millibars, an atmosphere of 99.9% CO2 and 0.1% O2, a freeze-thaw cycle of -65 C for 16 h and 24 C for 8 h, and variable moisture and nutrients. Reduced pressure had a significant effect, reducing growth under these conditions. Slight variations in gaseous composition of the simulated atmosphere had negligible effect on growth. The freeze-thaw cycle did not inhibit growth, but did result in a slower rate of decline after growth had occurred. Dry samples exhibited no change during the 45-day experiment, indicating that the simulated Martian environment was not toxic to bacterial populations. Psychrotrophic organisms responded more favorably to this environment than mesophiles, although both types exhibited increases of approximately 3 logs in 7 to 14 days when moisture and nutrients were available.

Foster, T. L.↗

NASA NTRS1981

Research on design feasibility of high-power light-weight dc-to-dc converters for space power applications

Utilizing knowledge gained from past experience with experimental current-or-voltage step-up dc-to-dc converter power stages operating at output powers up to and in excess of 2 kW, a new experimental current-or-voltage step-up power stage using paralleled bipolar junction transistors (BJTs) as the controlled power switch, was constructed during the current reporting period. The major motivation behind the construction of this new experimental power stage was to improve the circuit layout so as to reduce the effects of stray circuit parasitic inductances resulting from excess circuit lead lengths and circuit loops, and to take advantage of the layout improvements which could be made when some recently-available power components, particularly power diodes and polypropylene filter capacitors, were incorporated into the design.

Wilson, T. G.↗

NASA NTRS1981

Echelle spectroscopy with a charge-coupled device /CCD/

The recent availability of large format CCD's with high quantum efficiency makes it possible to achieve significant advances in high dispersion astronomical spectroscopy. An echelle CCD combination excels or equals other techniques presently available, and offers the advantage of complete spectral coverage of several thousand Angstroms in a single exposure. Attention is given to experiments which were conducted with a CCD camera head and an echelle spectrograph on a 4-meter telescope. It was found possible to achieve a signal-to-noise ratio of 150/1 on a 13th magnitude star at 6000 A in a two-hour exposure at 0.16 A/pixel, limited primarily by photon statistics. For fainter objects, readout noise is the limiting factor in precision. For 20 electron rms readout noise, an S/N = 15/1 at 18th magnitude is expected, all other things being equal.

York, D. G.↗

NASA NTRS1982

On the interaction of auroral protons with the earth's atmosphere

The interaction of energetic auroral protons with the atmosphere is investigated. The results of a random number algorithm that describes the proton-hydrogen interconversion reactions as the beam loses energy are adopted to construct an energy deposition curve applicable over a wide range of initial proton energies. Ionization rates and production rates of ejected electrons are computed and emission rates of hydrogen Balmer alpha and beta lines are evaluated using recently available low energy cross-sections.

Rees, M. H.↗

NASA NTRS1983

Steady flow approximations to the helium r-process

A steady flow approximation to the r-process is presented and used for numerical experiments with physical quantities to determine the sensitivity of the process to variations in those quantities. The effect of neutron capture cross sections along the capture path and of recently available improved beta decay rates on the r-process are discussed. The peaks in the observed r-process yield curve near mass numbers 80 and 130 are roughly characterized by a neutron number density of 10 to the 20th per cu/cm; the mean beta decay rates are about 10/s, and the freezing time is comparable to or less than 0.1 s. The peak near mass number 195 is roughly characterized by a neutron number density of 10 to the 21st/cm, the mean beta decay rates are about 100/s, and the freezing time is comparable to or less than 0.01 s. The flow path of the steady state r-process is sensitively dependent upon the neutron capture cross sections in the flow network and on the values of the beta decay rates.

Cameron, A. G. W.↗

NASA NTRS1984

Redesign and cascade tests of a supercritical controlled diffusion stator blade-section

A supercritical stator blade section, previously tested in cascade, and characterized by a flat-roof-top suction surface Mach number distribution, has been redesigned and retested. At near design conditions, the losses and air turning were improved over the original blade by 50 percent and 7 percent respectively. The key element in the improved performance was a small blade reshaping. This produced a continuous flow acceleration over the first one-third chord of the suction surface which successfully prevented a premature laminar separation bubble. Several recently available inviscid analysis and one fully viscous (Navier-Stokes) analysis code were used in the redesign process. The validity of these codes was enhanced by the test results.

Schmidt, J. F.↗

NASA NTRS1984

Redesign and cascade tests of a supercritical controlled diffusion stator blade-section

A supercritical stator blade section, previously tested in cascade, and characterized by a flat-roof-top suction surface Mach number distribution, has been redesigned and retested. At near design conditions, the losses and air turning were improved over the original blade by 50 percent and 7 percent, respectively. The key element in the improved performance was a small blade reshaping. This produced a continuous flow acceleration over the first one-third chord of the suction surface which successfully prevented a premature laminar separation bubble. Several recently available inviscid analysis codes and one fully viscous (Navier-Stokes) analysis code were used in the redesign process. The validity of these codes was enhanced by the test results. Previously announced in STAR as N84-22533

Schmidt, J. F.↗

NASA NTRS1984

The geochemical behavior of refractory noble metals and lithophile trace elements in refractory inclusions in carbonaceous chondrites

Recent models of Ca, Al-rich (CAI) inclusion petrogenesis, and the recent availability of thermodynamic data have led to the reexamination of the geochemical behavior of the refractory noble metals (RNM) and several lithophile refractory trace elements in CAI's in the context of distillation models. Here, pertinent chemical and mineralogical properties of the various classes of refractory inclusions are reviewed, and calculations of the stability of LRTE-RNM alloys and several LRTE oxides under nebular conditions are presented. The calculations, observations and experimental results are applied to a new model of the origin of refractory metal nuggets, and a specific mechanism is identified for producing Group II chemical patterns in a cold star nebula by fractionating interstellar dust at low temperature on the basis of physical differences between different populations of pre-solar grains.

Fegley, B., Jr.↗

NASA NTRS1985

A modeling analysis program for the JPL Table Mountain Io sodium cloud data

The necessary personnel software base was established to accomplish the data processing requirements for this project. Conversion of software required in reformatting the raw Io sodium cloud data was completed and data processing activities were initiated. Slit spectra data acquired by the JPL Table Mountain Io sodium cloud observing program were reviewed and their scientific value assessed. The lifetime description for sodium atoms in the Io sodium cloud model was improved by incorporating the most recently available temperatures and densities for ions and electrons in the plasma torus.

Smyth, W. H.↗

NASA NTRS1985

Transport processes as manifested in satellite and lidar aerosol measurements

A large increase in stratospheric aerosol data has become available recently from the SAM II and SAGE satellite sensors and the impetus from increased volcanic perturbations. Six years of SAM II and nearly 3 years of SAGE measurements have been accumulated. The increase in large volcanic eruptions since 1979 has caused an acceleration of new data sets from worldwide lidars and airborne lidar campaigns and from various airborne in situ measurements. The SAM II and SAGE data sets show the tropical stratosphere as a source for background stratospheric aerosols, and midlatitudes as a possible sink. Analyses of SAM II data show that the aerosol within the northern wintertime polar vortex becomes isolated from the outside. Subsidence occurs within the vortex, changing the vertical aerosol distribution over the winter period. SAM II and SAGE data show that the aerosol is transported in the stratosphere from low to high latitudes in wintertime. Entry regions of tropospheric air in the Tropics are also evident in the SAGE data as shown by stratospheric cirrus clouds being formed well above the local tropopause. Nature has provided over the past 5 years a number of large volcanic eruptions which spewed tons of new aerosol into the stratosphere. These eruptions have occurred at various latitudes which allow transport differences to be studied. Satellite and lidar aerosol data will be used to describe the stratospheric motions of aerosols produced after these violet volcanic eruptions.

Mccormick, M. P.↗

NASA NTRS1986

A direct time series comparison between the La Jolla and Belfast radiocarbon records

For many years it has been widely assumed that the variations in the level of atmospheric carbon-14 were due to statistical fluctuations arising from experimental error. This is understandable since the signal/noise ratio is very low and the time sequences representing the variations are strongly stochastic. Interlaboratory comparisons show that baseline variations in the absolute value of the carbon-14 concentration do exist. However, assuming linearity, the delta 14C values are independent of these. The importance of assessing the quantitive reality of the delta 14C values is based upon their expression of the interplanetary cosmic ray source function, because in the range of 100 to 1000 year periods, there appears to be no evidence that the Earth's magnetic field is the source modulating function. Therefore the modulation is either due to changes in the solar atmosphere propagated out into the solar wind, or extra-heliospheric pressure effects, but these appear to be unlikely for the periods noted here. The recent availability of the new high quality Belfast time sequence of delta 14C now permits a simple mutual assessment of the several sequences which are available. Since the La Jolla record has been a standard for many years , these two were chosen for a simple comparison. Although differences exist, the close agreement between these two sequences, one carried out on White mountain Bristlecone pines, and the other done using Irish peat bog wood, is striking. This correlation between the two strongly reinforces the statistical view that the delta 14C record is that of real interplanetary modulation of the cosmic ray source leading to the generation of atmospheric 14C.

Sonett, C. P.↗

NASA NTRS1986

Scattered light in the IUE spectra of Epsilon Aurigae

Recent infrared photometry indicates that the alleged disk of particulate matter surrounding the mysterious secondary object in the Epsilon Aur system is cold, around 500 K. IUE spectra, on the other hand, contain significant flux in excess of that expected from an F0 Ia star in the far UV, which if interpreted as a hot secondary star leads to a possible contradiction with the IR data. Other models of the UV excess have been proposed, including the idea that the bulk of the short-wavelength flux is light scattered into the SWP camera from longer wavelengths. With the recent availability of a detailed generalized IUE descattering algorithm it is possible to thoroughly investigate the scattered-light contribution to the short-wavelength continuum. It is found that the IUE spectra are indeed partially contaminated by scattered light, but that even after correction for this instrumental effect a significant time-dependent UV excess is still present.

Altner, B.↗

NASA NTRS1987

An evaluation of Turbo Prolog with an emphasis on its application to the development of expert systems

Turbo Prolog is a recently available, compiled version of the programming language Prolog. Turbo Prolog is designed to provide not only a Prolog compiler, but also a program development environment for the IBM Personal Computer family. An evaluation of Turbo Prolog was made, comparing its features to other versions of Prolog and to the community of languages commonly used in artificial intelligence (AI) research and development. Three programs were employed to determine the execution speed of Turbo Prolog applied to various problems. The results of this evaluation demonstrated that Turbo Prolog can perform much better than many commonly employed AI languages for numerically intensive problems and can equal the speed of development languages such as OPS5+ and CLIPS, running on the IBM PC. Applications for which Turbo Prolog is best suited include those which (1) lend themselves naturally to backward-chaining approaches, (2) require extensive use of mathematics, (3) contain few rules, (4) seek to make use of the window/color graphics capabilities of the IBM PC, and (5) require linkage to programs in other languages to form a complete executable image.

Loftin, Richard B.↗

NASA NTRS1986

Seven years of total ozone from the TOMS instrument - A report on data quality

Seven years of TOMS total ozone data are currently available. Recently a new ozone retrieval algorithm based on improved ozone absorption cross section was implemented that has introduced 6-7 percent discontinuity in the archived data sets at the end of the fifth year of instrument operation. Until all data are reprocessed with the new algorithm users can use a table of correction factors given in this paper to make the data set internally consistent. This paper also presents a comparison of TOMS results with Amundsen Scott Dobson station. Though the agrement in most years is good, in 1983-84 the Dobson station reported unusually high values of ozone while TOMS saw the very low ozone values associated with the Antarctica ozone hole.

Fleig, Albert J.↗

NASA NTRS1987

Solar origins of coronal mass ejections

The large scale properties of coronal mass ejections (CMEs), such as morphology, leading edge speed, and angular width and position, have been cataloged for many events observed with coronagraphs on the Skylab, P-78, and SMM spacecraft. While considerable study has been devoted to the characteristics of the SMEs, their solar origins are still only poorly understood. Recent observational work has involved statistical associations of CMEs with flares and filament eruptions, and some evidence exists that the flare and eruptive-filament associated CMEs define two classes of events, with the former being generally more energetic. Nevertheless, it is found that eruptive-filament CMEs can at times be very energetic, giving rise to interplanetary shocks and energetic particle events. The size of the impulsive phase in a flare-associated CME seems to play no significant role in the size or speed of the CME, but the angular sizes of CMEs may correlate with the scale sizes of the 1-8 angstrom x-ray flares. At the present time, He 10830 angstrom observations should be useful in studying the late development of double-ribbon flares and transient coronal holes to yield insights into the CME aftermath. The recently available white-light synoptic maps may also prove fruitful in defining the coronal conditions giving rise to CMEs.

Kahler, Stephen↗

NASA NTRS1988

Shape memory alloys: New materials for future engineering

Shape memory is a new material property. An alloy which experiences relative severe plastic deformation resumes its original shape again after heating by 10 to 100 C. Besides simple shape memory, in similar alloys there is the second effect where the change in shape is caused exclusively by little temperature change. In pseudo-elasticity, the alloy exhibits a rubber-like behavior, i.e., large, reversible deformation at little change in tension. Beta Cu and beta NiTi alloys have been used in practice. The probability is that soon alloys based on Fe will become available. Recently increasing applications for this alloy were found in various areas of technology, even medical technology. A review with 24 references is given, including properties, production, applications and fundamental principles of the shape memory effect.

Hornbogen, E.↗

NASA NTRS1986

Development of low Reynolds number two equation turbulence models for predicting external heat transfer on turbine blades

A research effort was underway to study the use of two equation low Reynolds number turbulence models in predicting gas side heat transfer on turbine blades. The major objectives of this work are basicly threefold: study the predictive capabilities of two equation low Reynolds number turbulence models under the conditions characteristic of modern gas turbine blades; explore potential improvements to the models themselves as well as to the specification of initial conditions; and provide a comparison of the predictions of these models with the experimental data from a broad range of recently available turbine cascade experiments. The problems associated with predicting the boundary layer transition from laminar to turbulent flow are emphasized, as this may be the most serious deficiency of current modeling techniques. The results and conclusions of the first two phases are briefly described.

Patankar, Suhas V.↗

NASA NTRS1989

Working group written presentation: Atomic oxygen

Earlier Shuttle flight experiments have shown NASA and SDIO spacecraft designed for operation in low-Earth orbit (LEO) must take into consideration the highly oxidative characteristics of the ambient flight environment. Materials most adversely affected by atomic oxygen interactions include organic films, advanced (carbon-based) composites, thermal control coatings, organic-based paints, optical coatings, and thermal control blankets commonly used in spacecraft applications. Earlier results of NASA flight experiments have shown prolonged exposure of sensitive spacecraft materials to the LEO environment will result in degraded systems performance or, more importantly, lead to requirements for excessive on-orbit maintenance, with both conditions contributing significantly to increased mission costs and reduced mission objectives. Flight data obtained from previous Space Shuttle missions and results of the Solar Max recovery mission are limited in terms of atomic oxygen exposure and accuracy of fluence estimates. The results of laboratory studies to investigate the long-term (15 to 30 yrs) effects of AO exposure on spacecraft surfaces are only recently available, and qualitative correlations of laboratory results with flight results have been obtained for only a limited number of materials. The working group recommended the most promising ground-based laboratories now under development be made operational as soon as possible to study the full-life effects of atomic oxygen exposure on spacecraft systems.

Leger, Lubert J.↗