SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The time between transitions in the video output of a camera is measured when registered at reticle marks on the vidicon faceplate. This device permits precision calibration of raster linearity of television camera tubes.
Raster generator for shock velocity measurements
Circuit enhances vertical resolution in electron beam, raster scanning systems exhibiting aperture distortion in the vertical direction. A sensitized area /image/ produces a video output when the scan beam nears it, which causes vertical elongation in the reconstructed images of all sensitized areas on the surface.
An analysis is presented that shows the desirability and feasibility of conducting irradiations of large test objects by beams of penetrating radiation, by the method of moving the test object back and forth through the beam, rather than by sweeping the beam across the object. An extension of this method of inverse rastering allows the generation of composite beams with any desired intensity-vs-energy spectrum, obviating the need to determine equivalent damage factors for every energy in the spectrum.
IBIS (Image Based Information System) is a geographic information system which makes use of digital image processing techniques to interface existing geocoded data sets and information management systems with thematic maps and remotely sensed imagery. The basic premise is that geocoded data sets can be referenced to a raster scan that is equivalent to a grid cell data set. The first applications (St. Tammany Parish, Louisiana, and Los Angeles County) have been restricted to the design of a land resource inventory and analysis system. It is thought that the algorithms and the hardware interfaces developed will be readily applicable to other Landsat imagery.
A method is presented for converting polygons coded in raster data structures into conventional vector structures to allow the output of scanner-based data collection systems to be input directly to conventional geographic information systems. The method relies on topological principles to (1) uniquely label each polygon in the image and produce an output image in which each pixel is described by the label of the polygon to which it belongs; (2) create line segment components of polygon boundaries, with nodes labeled and the two adjacent polygons identified; and (3) traverse the polygon boundaries by connecting the appropriate adjacent line segments. The conversion capability makes it possible to design systems which automatically convert to the data structure most appropriate for a particular application.
A description is provided of the application of the raster-scan, color programmable display generator (PDG) in the generation of multiple, simultaneous cockpit display formats at medium resolution, and their display on conventional R-G-B monitors and on recently developed thin film electroluminescent (TFEL) panels. The Graphics Display System of the Cockpit Systems Branch is discussed, taking into account hardware and software. Questions of system utilization are explored, giving attention to simultaneous display generation, scan standards, flat panel displays, and display enhancement software. Aspects of system performance are also examined, and an outline of future research plans is provided.
For the study of human and animal vision, the video framebuffer is the only technology that is capable of displaying two-dimensional images with precise control of contrast, luminance, and display timing. The video framebuffer also allows precise control of color. However, this device is not designed for precise psychophysical displays, and techniques must be developed to use them in this role. In order to be concrete, an RDS-3000 raster display system (Adage, 1982) is used which is hosted by a PDP-11/73 under the Venix operating system. The principles generalize to other machines. Where it clarifies the issues, the syntax of the software routines involved is shown.
Techniques which may be used to increase the animation update rate of real-time computer raster graphic displays are discussed. They were developed on the ADAGE RDS 3000 graphic system in support of the Advanced Concepts Simulator at the NASA Langley Research Center. These techniques involve the use of a special purpose parallel processor, for high-speed character generation. The description of the parallel processor includes the Barrel Shifter which is part of the hardware and is the key to the high-speed character rendition. The final result of this total effort was a fourfold increase in the update rate of an existing primary flight display from 4 to 16 frames per second.
An experiment designed to test the feasibility of using rotating unbalanced-mass (RUM) devices for line and raster scanning gimbaled payloads, while expending very little power is described. The experiment is configured for ground-based testing, but the scan concept is applicable to ground-based, balloon-borne, and space-based payloads, as well as free-flying spacecraft. The servos used in scanning are defined; the electronic hardware is specified; and a computer simulation model of the system is described. Simulation results are presented that predict system performance and verify the servo designs.
Report describes proposed experiment to demonstrate feasibility of using rotating-unbalanced-mass (RUM) actuator to effect raster scanning of instrument mounted in two-axis gimbal. Conceptual RUM and auxiliary RUM control mechanism described in "Auxiliary Mechanisms for Rotating-Unbalanced-Mass Actuators" (MFS-28817).
The BOREAS TE-1 team collected various data to characterize the soil-plant systems in the BOREAS SSA. This data set was gridded from vector layers of soil maps that were received from Dr. Darwin Anderson (TE-1), who did the original soil mapping in the field during 1994. The vector layers were gridded into raster files that cover approximately 1 square kilometer over each of the tower sites in the SSA. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).
The BOREAS TE-20 team collected several data sets for use in developing and testing models of forest ecosystem dynamics. This data set was gridded from vector layers of soil maps that were received from Dr. Hugo Veldhuis, who did the original mapping in the field during 1994. The vector layers were gridded into raster files that cover the NSA-MSA and tower sites. The data are stored in binary, image format files. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Active Center (DAAC).
This data set, originally provided as vector polygons with attributes, has been processed by BORIS staff to provide raster files that can be used for modeling or for comparison purposes. The original data were received as ARC/INFO coverages or as export files from SERM. The data include information on forest parameters for the BOREAS SSA-MSA. Most of the data used for this product were acquired by BORIS in 1993; the maps were produced from aerial photography taken as recently as 1988. The data are stored in binary, image format files.
The BOReal Ecosystem-Atmosphere Study Trace Gas Biogeochemistry (BOREAS TGB-5) team collected several data sets related to the effects of fire on the exchange of trace gases between the surface and the atmosphere. This raster format data set covers the province of Manitoba between 1980 and 1991. The data were gridded into the Albers Equal-Area Conic (AEAC) projection from the original vector data. The original vector data were produced by Forestry Canada from hand-drawn boundaries of fires on photocopies of 1:250,000-scale maps. The locational accuracy of the data is considered fair to poor. When the locations of some fire boundaries were compared to Landsat TM images, they were found to be off by as much as a few kilometers. This problem should be kept in mind when using these data. The data are stored in binary, image format files.
This data set was processed by BORIS staff from the original vector data of species, crown closure, cutting class, and site classification/subtype into raster files. The original polygon data were received from Linnet Graphics, the distributor of data for MNR. In the case of the species layer, the percentages of species composition were removed. This reduced the amount of information contained in the species layer of the gridded product, but it was necessary in order to make the gridded product easier to use. The original maps were produced from 1:15,840-scale aerial photography collected in 1988 over an area of the BOREAS NSA MSA. The data are stored in binary, image format files and they are available from Oak Ridge National Laboratory. The data files are available on a CD-ROM (see document number 20010000884).
The impact of photons upon a spacecraft introduces small forces and moments. The magnitude and direction of the forces depend on the material properties of the spacecraft components being illuminated. Which components are being lit depends on the orientation of the craft with respect to the Sun as well as the gimbal angles for any significant moving external parts (solar arrays, typically). Some components may shield others from the Sun.To determine solar pressure in the presence overlapping components, a 3D model can be used to determine which components are illuminated. A view (image) of the model as seen from the Sun shows the only contributors to solar pressure. This image can be decomposed into pixels, each of which can be treated as a non-overlapping flat plate as far as solar pressure calculations are concerned. The sums of the pressures and moments on these plates approximate the solar pressure and moments on the entire vehicle.The image rasterization technique can also be used to compute other spacecraft attributes that are dependent on attitude and geometry, including solar array power generation capability and free molecular flow drag.
Explore the source record for details and available documents.