Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pseudocapacitance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Amorphization of Pseudocapacitive T−Nb 2 O 5 Accelerates Lithium Diffusivity as Revealed Using Tunable Isomorphic Architectures

Abstract Intercalation pseudocapacitance can combine capacitor‐like power densities with battery‐like energy densities. Such surface‐limited behavior requires rapid diffusion where amorphization can increase solid‐state diffusivity. Here intercalation pseudocapacitive materials with tailored extents of amorphization in T‐Nb 2 O 5 are first reported. Amorphization was characterized with WAXS, XPS, XAFS, and EPR which suggested a peroxide‐rich (O 2 2− ) surface that was consistent with DFT predictions. A series of tunable isomorphic architectures enabled comparisons while independently varying transport parameters. Through process of elimination, solid‐state lithium diffusion was identified as the dominant diffusive‐constraint dictating the maximum voltage sweep rate for surface‐limited kinetics ( v SLT ), termed the Surface‐Limited Threshold (SLT). The v SLT increased with amorphization however stable cycling required crystalline T‐Nb 2 O 5 . A current‐response model using series‐impedances well‐matched these observations. This perspective revealed that amorphization of T‐Nb 2 O 5 enhanced solid‐state diffusion by 12.2 % and increased surface‐limitations by 17.0 % (stable samples). This approach enabled retaining 95 % lithiation capacity at ∼800 mV s −1 (1,600 C‐rate equivalent).

25 ENERGY STORAGE↗
DOE OSTI2024

Selective pseudocapacitive immobilization of REE elements on carbon based electrodes

Current extraction technologies for rare earth elements at ambient conditions are reagent and energy intensive, giving rise to significant quantities of secondary waste streams. Exploration of the removal of common cations from aqueous streams has been undertaken with carbon materials and have shown promising results. However, those promising materials have not been explored extensively for rare earth element capture from aqueous process streams. In this study, a carbon electrode was investigated for the adsorption and immobilization of REE elements from aqueous solutions. Cyclic voltammetry studies of the carbon electrode displayed a pseudocapacitive behavior where it was verified that cation adsorption is accompanied by an electron transfer process. Preliminary tests showed that a current density of 89.1 mA. g -1 , allowed for the pseudocapacitive adsorption (PSA) of Nd 3+ cation without the formation of rare earth hydroxides. Hence, the selective PSA of Nd 3+ was verified in an electrolyte solution with equimolar concentrations of Nd 3+ , Mg 2+ , Li + , Na + and K + , achieving separation factors of 8.6, 1.1, and 10.9 for Nd 3+ /Li + , Nd 3+ /Na + , and Nd 3+ /Mg 2+ , respectively. Analysis of the potential-time curves for the various cations suggests that storage of ions in the electrode involved pore-spacings rather than interlayer spacings and was corroborated by XRD analysis. Specific capacitance as high as >640 F.g -1 for Nd 3+ was also observed for the carbon electrode, with Faradaic efficiencies (FE) of > 20% for Nd 3+ and Mg 2+ , and > 9% for Na + . Furthermore, adsorption capacity of >125 mg g -1 after 4hrs of electrosorption was observed for Nd 3+ . In the presence of the Nd 3+ electrolyte, the electrode achieved increasing storage of Nd 3+ with >94% retention of Nd 3+ with a FE > 20% over 6 cycles between loading and releases in 1 M KCl solution. In conclusion, these preliminary results provide information and some guidance on the selective recovery of rare earth elements, such as Nd, in aqueous streams in the presence of competitive cations employing the use of carbon-based materials.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2018

Efficient 3D Printed Pseudocapacitive Electrodes with Ultrahigh MnO 2 Loading

Retaining sound electrochemical performance of electrodes at high mass loading holds critical importance to energy storage. Pseudocapacitive materials such as manganese oxide (MnO 2 ) deposited on current collectors have achieved outstanding gravimetric capacitances, sometimes even close to their theoretical values. However, this is only achievable with very small mass loading of active material typically less than 1 mg cm -2 . Increasing mass loading often leads to drastic decay of capacitive performance due to sluggish ion diffusion in bulk material. In this work, we demonstrate a 3D printed graphene aerogel electrode with MnO 2 loading of 182.2 mg cm -2 , which achieves a record-high areal capacitance of 44.13 F cm -2 . Most importantly, this 3D printed graphene aerogel/MnO 2 electrode can simultaneously achieve excellent capacitance normalized to area, gravimetry, and volume, which is the trade-off for most electrodes. This work successfully validates the feasibility of printing practical pseudocapacitive electrodes, which might revolutionize pseudocapacitor fabrication.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Nanoparticles-constructed spinel ZnFe2O4 anode material with superior lithium storage performance boosted by pseudocapacitance

Highlights: • Nanoparticles-constructed ZnFe{sub 2}O{sub 4} was fabricated by co-precipitation method. • The ZnFe{sub 2}O{sub 4} sample shows excellent high rate capability and cycling stability. • The lithium storage mechanism was analyzed by CV and EIS measurements. • Pseudocapacitive effect has a significant contribution to the total stored charge. - Abstract: The practical application of ZnFe{sub 2}O{sub 4} in lithium ion batteries (LIBs) is severely hampered by its fast capacity fading and poor rate performance. To overcome these issues, herein, ZnFe{sub 2}O{sub 4} powders consist of aggregated nanoparticles (50∼100 nm) with porosity were prepared by a facile co-precipitation method and subsequent thermal decomposition. When used as anode material for LIBs, the ZnFe{sub 2}O{sub 4} sample delivers capacities of 920, 820, 650, 485, and 421 mA h g{sup −1} at current densities of 0.5, 1, 3, 7, and 10 A g{sup −1}, respectively. Moreover, the sample can maintain a capacity of 814 mA h g{sup −1} even after 300 cycles at the current density of 1 A g{sup −1}, implying an excellent rate capability and cycling stability. Cyclic voltammetry analysis reveals that both diffusion-controlled lithium storage and surface pseudocapacitive lithium storage contribute to the total stored charge of ZnFe{sub 2}O{sub 4}, which boosts the high rate capability and superior cycling stability of the ZnFe{sub 2}O{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Ultra-high-rate pseudocapacitive energy storage in two-dimensional transition metal carbides

In this study, the use of fast surface redox storage (pseudocapacitive) mechanisms can enable devices that store much more energy than electrical double-layer capacitors (EDLCs) and, unlike batteries, can do so quite rapidly. Yet, few pseudocapacitive transition metal oxides can provide a high power capability due to their low intrinsic electronic and ionic conductivity. Here we demonstrate that two-dimensional transition metal carbides (MXenes) can operate at rates exceeding those of conventional EDLCs, but still provide higher volumetric and areal capacitance than carbon, electrically conducting polymers or transition metal oxides. We applied two distinct designs for MXene electrode architectures with improved ion accessibility to redox-active sites. A macroporous Ti 3 C 2 T x MXene film delivered up to 210 F g –1 at scan rates of 10 V s –1 , surpassing the best carbon supercapacitors known. In contrast, we show that MXene hydrogels are able to deliver volumetric capacitance of ~1,500 F cm –3 reaching the previously unmatched volumetric performance of RuO 2 .

25 ENERGY STORAGE↗
DOE OSTI2016

Oxygen vacancies enhance pseudocapacitive charge storage properties of MoO3-x

The short charging times and high power capabilities associated with capacitive energy storage make this approach an attractive alternative to batteries. One limitation of electrochemical capacitors is their low energy density and for this reason, there is widespread interest in pseudocapacitive materials that use Faradaic reactions to store charge. One candidate pseudocapacitive material is orthorhombic MoO3 (α-MoO3), a layered compound with a high theoretical capacity for lithium (279 mA h g-1 or 1,005 C g-1). Here, we report on the properties of reduced α-MoO3-x(R-MoO3-x) and compare it with fully oxidized α-MoO3 (F-MoO3). The introduction of oxygen vacancies leads to a larger interlayer spacing that promotes faster charge storage kinetics and enables the α-MoO3 structure to be retained during the insertion and removal of Li ions. The higher specific capacity of the R-MoO3-x is attributed to the reversible formation of a significant amount of Mo4+ following lithiation. This study underscores the potential importance of incorporating oxygen vacancies into transition metal oxides as a strategy for increasing the charge storage kinetics of redox-active materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electrochemically in situ formed rocksalt phase in titanium dioxide determines pseudocapacitive sodium-ion storage

Earth-abundant TiO 2 is a promising negative electrode for low-cost sodium-ion batteries (SIBs) owing to its high capacity, rapid (dis)charging capability, safe operation potential and nonflammability. Crystalline anatase TiO 2 is not suitable for reversible Na + (de)intercalation, but it displays pseudocapacitive response after repeated cycles. Herein, we find and demonstrate that ordered rocksalt (RS) NaTiO 2 nanograins are in situ formed by electrochemically cycling with Na + ions in anatase and amorphous TiO 2 . The in situ formed RS-NaTiO 2 follows a solid-solution reaction with small volume changes of only 2.0%, that determines the pseudocapacitive “mirror-like” cyclic voltammetry curve with a couple of broad redox peaks at 0.75 V vs. Na + /Na, a high capacity of 253 mAh g −1 , high-rate capability and thousands of stable cycles. The multistep crystalline-to-amorphous-to-RS transformations are able to be electrochemically activated during the aging process of assembled full cells. Our finding provides a direction for developing unconventional Ti-based high-performance active materials for SIBs with both high energy and power densities.

Tang, Dafu [Xiamen University (China); Innovation ↗
DOE OSTI2025

Effect of growth dynamics on the structural, photophysical and pseudocapacitance properties of famatinite copper antimony sulphide colloidal nanostructures (including nanosheets)

Facile phase selective synthesis of copper antimony sulphide (CAS) nanostructures is important because of their tunable photoconductive and electrochemical properties. In this study, off-stoichiometric famatinite phase CAS (fCAS) quasi-spherical and quasi-hexagonal colloidal nanostructures (including nanosheets) of sizes, 2.4–18.0 nm were grown under variable conditions of temperature (60–200 °C), time and oleylamine capping ligand concentration using copper(II) acetylacetonate and antimony(III) diethyldithiocarbamate precursors. Data from powder X-ray diffraction, Raman spectroscopy and high-resolution scanning/transmission electron microscopy confirm the tetragonal structure of the famatinite phase. X-ray photoelectron spectroscopy, transmission electron microscopy and scanning electron microscopy-energy dispersive X-ray spectroscopy data suggest a correlation of particle size, morphology and composition of the off-stoichiometric fCAS nanostructures with growth temperature and time, and oleylamine concentration. The off-stoichiometric Cu 3-a Sb 1+b S 4±c (a, b, c – mole fractions) nanostructures being severely copper-deficient and antimony-rich, exhibit shallow-lying acceptor copper vacancy states, deep-lying donor states of antimony interstitials, sulphur vacancies and antimony-copper antisites and shallow-lying acceptor surface trapping states. Further, these electronic states are likely implicated in tunable UV-visible absorption and bandgaps between 2.3 and 2.8 eV, and broad visible-NIR photoluminescence with fast recombination of radiative lifetimes between 0.2 and 6.2 ns, confirmed from absorption, steady-state and time-resolved photoluminescence spectroscopies. Additionally, cyclic voltammetry and electrochemical impedance spectroscopy confirm that electrodes of the fCAS nanostructures display slightly variable pseudocapacitance of charge-storage primarily via possible sodium ion intercalation with a high specific capacitance of ~84 F g -1 obtained at a scan rate of 5 mV s -1 . Overall, these results show the influence of composition, in particular point defects, phase quality and morphology on the optical and pseudocapacitance properties of fCAS nanostructures, suitable as solar absorbers or electrodes for energy storage devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High-Energy and Stable Subfreezing Aqueous Zn–MnO 2 Batteries with Selective and Pseudocapacitive Zn-Ion Insertion in MnO 2

One major challenge of aqueous Zn–MnO 2 batteries for practical applications is their unacceptable performance below freezing temperatures. Here, in this study, the use of simple Zn(ClO 4 ) 2 aqueous electrolytes is described for all-weather Zn–MnO 2 batteries even down to -60 °C. The symmetric, bulky ClO 4 - anion effectively disrupts hydrogen bonds between water molecules and provides intrinsic ion diffusion even while frozen, and enables ≈260 mAh g -1 on MnO 2 cathodes at -30 °C . It is identified that subfreezing cycling shifts the reaction mechanism on the MnO 2 cathode from unstable H+ insertion to predominantly pseudocapacitive Zn 2+ insertion, which converts MnO 2 nanofibers into complicated zincated MnO x that are largely disordered and appeared as crumpled paper sheets. The Zn 2+ insertion at -30 °C is faster and much more stable than at 20 °C, and delivers ≈80% capacity retention for 1000 cycles without Mn 2+ additives. In addition, simple Zn(ClO 4 ) 2 electrolyte also enables a nearly fully reversible and dendrite-free Zn anode at -30 °C with ≈98% Coulombic efficiency. Zn–MnO 2 prototypes with an experimentally verified unit energy density of 148 Wh kg -1 at a negative-to-positive ratio of 1.5 and an electrolyte-to-capacity ratio of 2.0 are further demonstrated.

25 ENERGY STORAGE↗
DOE OSTI2020

3D‐Printed Structure Boosts the Kinetics and Intrinsic Capacitance of Pseudocapacitive Graphene Aerogels

Abstract The performance of pseudocapacitive electrodes at fast charging rates are typically limited by the slow kinetics of Faradaic reactions and sluggish ion diffusion in the bulk structure. This is particularly problematic for thick electrodes and electrodes highly loaded with active materials. Here, a surface‐functionalized 3D‐printed graphene aerogel (SF‐3D GA) is presented that achieves not only a benchmark areal capacitance of 2195 mF cm −2 at a high current density of 100 mA cm −2 but also an ultrahigh intrinsic capacitance of 309.1 µF cm −2 even at a high mass loading of 12.8 mg cm −2 . Importantly, the kinetic analysis reveals that the capacitance of SF‐3D GA electrode is primarily (93.3%) contributed from fast kinetic processes. This is because the 3D‐printed electrode has an open structure that ensures excellent coverage of functional groups on carbon surface and facilitates the ion accessibility of these surface functional groups even at high current densities and large mass loading/electrode thickness. An asymmetric device assembled with SF‐3D GA as anode and 3D‐printed GA decorated with MnO 2 as cathode achieves a remarkable energy density of 0.65 mWh cm −2 at an ultrahigh power density of 164.5 mW cm −2 , outperforming carbon‐based supercapacitors operated at the same power density.

asymmetric supercapacitors↗
DOE OSTI2018

Understanding the MXene Pseudocapacitance

MXenes have attracted great attention as next-generation capacitive energy-storage materials, but the mechanisms underlying their pseudocapacitive behavior are not well understood. Here we provide a theoretical description of the surface redox process of Ti3C2Tx (T = O, OH), a prototypical MXene, in 1 M H2SO4 electrolyte, based on joint density functional theory with an implicit solvation model and the analysis of Gibbs free energy under a constant-electrode potential. From the dependence of the O/OH ratio (or the surface H coverage) and the surface charge on the applied potential, we obtain a clear picture of the capacitive energy-storage mechanism of Ti3C2Tx that shows good agreement with previous experimental findings in terms of the integral capacitance and Ti valence change. We find a voltage-dependent redox/double-layer co-charging behavior: the capacitive mechanism is dominated by the redox process, but the electric double-layer charge works against the redox process. This new insight may be useful in improving the capacitance of MXenes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

High-Mass Loading of Flower-like Ni-MoS 2 microspheres Toward Efficient Intercalation pseudocapacitive Electrode

This work reports the exploration of intercalation pseudocapacitance in a thicker electrode of flowerlike Ni-doped MoS 2 microspheres that features a mass loading of ~10 mg/cm 2 without sacrificing the gravimetric capacitance (~425 F/g at 5 mV/s). Integration of Ni atoms into MoS 2 microspheres not only stabilized the structural integrity but also ameliorated the rapid intercalation and deintercalation of electrolyte ions even at a commercial-level mass loading. The energy instability by Ni doping significantly changed the local bonding behavior and the overall electronic structure of MoS 2 , facilitating the breaking of the MoS 2 layer and generation of more active edge sites, which are responsible for faster reaction kinetics. The experiments attribute the overall capacitance enhancement in (Mo-Ni)S 2 to the increased rate of electrolyte ion insertion and extraction, which is confirmed by b-values close to 0.5, at different potentials, indicating that the current response predominantly depends on the diffusive mechanism for both MoS 2 and Ni-MoS 2 thicker electrodes. The symmetric device constructed with Ni-MoS 2 microspheres exhibited a capacitance value of 101 F/g in 1 mV/s, for which the energy density is 9 Wh/kg, as well as attained an outstanding cycling stability of 10000 cycles with 60% retention at 2 A/g. In addition to providing insights into the development of 2D TMDs, this work explores the design of robust and highly efficient intercalation electrode material for electrochemical energy storage devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Probing the In Situ Pseudocapacitive Charge Storage in Ti 3 C 2 MXene Thin Films with X-ray Reflectivity

MXenes are a large family of two-dimensional materials that are attractive for energy storage due to their high-rate charging capabilities as well as for electrochemical actuators, water purification, and many other technologies. Ion intercalation during electrochemically driven charge and discharge processes is the fundamental process associated with MXene functionality, which we have characterized here using in situ and operando X-ray reflectivity (XRR). Experiments performed at the Advanced Photon Source at Argonne National Laboratory monitored the changes in the structure of a Ti 3 C 2 MXene film on a platinum current collector as a function of static applied potential between 0.3 and –0.7 V vs Ag/AgCl in an aqueous 0.1 M Li 2 SO 4 electrolyte. Negative potential sweeps lead to a contraction of 1.2 Å in the interlayer spacing and a loss of electron density between the layers, likely due to Li + ion insertion and water removal. The change in lattice spacing includes a continuous variation vs potential as well as an additional discrete contraction that occurs near –0.35 V that has the characteristics of a first-order transition. The continuous change in the MXene interlayer spacing is associated with the capacitive charge, while the discrete change in structure correlated to the weak feature in the cyclic voltammogram at –0.35 V can be interpreted as either a pseudocapacitive charging process or a potential-dependent change in capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Selective CO 2 electrocatalysis at the pseudocapacitive nanoparticle/ordered-ligand interlayer

Enzymes feature the concerted operation of multiple components around an active site, leading to exquisite catalytic specificity. Realizing such configurations on synthetic catalyst surfaces remains elusive. In this article, we report a nanoparticle/ordered-ligand interlayer that contains a multi-component catalytic pocket for high-specificity CO 2 electrocatalysis. The nanoparticle/ordered-ligand interlayer comprises a metal nanoparticle surface and a detached layer of ligands in its vicinity. This interlayer possesses unique pseudocapacitive characteristics where desolvated cations are intercalated, creating an active-site configuration that enhances catalytic turnover by two orders and one order of magnitude against a pristine metal surface and nanoparticle with tethered ligands, respectively. The nanoparticle/ordered-ligand interlayer is demonstrated across several metals with up to 99% CO selectivity at marginal overpotentials and onset overpotentials of as low as 27 mV, in aqueous conditions. Furthermore, in a gas-diffusion environment with neutral media, the nanoparticle/ordered-ligand interlayer achieves nearly unit CO selectivity at high current densities (98.1% at 400 mA cm -2 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Metal chalcogenides for pseudocapacitive applications

A synthetic metal dichalcogenide having a highly defected nanocrystalline layered structure, wherein layer spacing is larger than in perfect crystals of the same material, wherein the defected structure provides access to interlayer crystals of the same material, and wherein the defected structure facilitates a pseudocapacitive charge storage mechanism. The metal dichalcogenide is receptive to intercalation of ions such as Li ions, Na ions, Mg ions, and Ca ions, and does not undergo a phase transition upon intercalation of Li ions, Na ions, Mg ions, or Ca ions. The metal dichalcogenide can be used, for example, as a component of an electrode that also includes a carbon derivative, and a binder, which are intermixed to form the electrode. The resultant composite electrode is highly porous and highly electronically conductive, and is suitable for use in devices such as symmetric capacitors, asymmetric capacitors, rocking chair batteries, and other devices.

25 ENERGY STORAGE↗
DOE OSTI2020

Understanding Functionalization of Titanium Carbide (MXene) with Quinones and Their Pseudocapacitance

In this work, the interaction mechanism of 1-aminoanthraquinone (AQ) on Ti 3 C 2 T x MXene by noncovalent (AQ@Ti 3 C 2 T x ) and covalent (AQ-Ti 3 C 2 T x ) functionalization is reported. Spectroscopic, X-ray, and scattering techniques confirmed noncovalent functionalization of AQ on Ti 3 C 2 T x MXene without its catalytic decomposition, resulting in intercalation and interaction of AQ with Ti 3 C 2 T x MXene. Diazonium reaction was further used to covalently functionalize AQ molecules on Ti 3 C 2 T x MXene. Optimized AQ-Ti 3 C 2 T x freestanding electrodes of ~44 μm thickness delivered capacitance of ~300 F/g and improved rate performance compared to the pristine counterpart (Ti 3 C 2 T x ) due to carbonyl redox of AQ and improved ionic transport between MXene layers due to pillaring of AQ molecules.

36 MATERIALS SCIENCE↗