Macroscale-area patterning of three-dimensional DNA-programmable frameworks
Not Available
36 MATERIALS SCIENCE↗
SEARCH · Engineering Papers
Results for “programmable synthesis”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Assembly of Metalloporphyrin Peptoids into Crystalline Nanomaterials as a Multifunctional System for Biomimetic Catalysis and Sensing
While natural enzymes excel at catalysis and sensing, they often suffer from high cost and low stability in applications outside living systems. Among tremendous efforts made toward the design and synthesis of catalytic biomimetic materials, the approach of using crystalline nanomaterials assembled from sequence-defined polymers has emerged as a promising strategy. Herein, we report the assembly of metalloporphyrin peptoids into crystalline nanomaterials as a multifunctional system for biomimetic catalysis and sensing. The precise spatial positioning of covalently attached porphyrins within crystalline peptoid nanomaterials enables the mimicry of several enzyme active sites, including phosphotriesterase and horseradish peroxidase, for efficient catalytic hydrolysis and oxidation reactions. Additionally, the high programmability of these peptoid crystalline materials enables the creation and tuning of the active site microenvironment for enhanced catalytic activity. We further demonstrate the integration of responsive organic dyes into catalytic peptoid assemblies to achieve both detection and degradation of chemical warfare agent (CWA) mimics, even in the vapor phase. In conclusion, we expect this multifunctional system to provide tremendous opportunities in biomimetic catalysis and sensing, including the detoxification and detection of CWAs.
Catalysts↗
Self-Assembling Cell-Free Systems for Scalable Bioconversion
This project focused on developing cell-free systems to directly express multi-enzyme catalysts and perform CO2 bioconversions for industrial chemical production. The use of cell-free expression (CFE) systems derived from bacterial lysates is emerging as a promising approach for biomanufacturing. CFEs are genetically programmable, permit the expression of toxic enzymes, and allow for rapid prototyping of metabolic pathways. Research Contributions: 1. Understanding the Area Investigated: This research advances the understanding of cell-free systems by demonstrating their capability to perform complex multi-enzyme reactions. By directly expressing multi-gene systems, CFEs avoid the high costs and inefficiencies associated with producing and purifying enzymes for multi-step pathways. 2. Technical Effectiveness and Economic Feasibility: The project successfully engineered a CFE-based multienzyme biocatalyst for the de novo synthesis of serine and glycine from CO2 equivalents (formate and bicarbonate) and ammonia. This method achieved a 30% conversion rate of formate into these industrially important amino acids. Additionally, an 8-gene CFE biocatalyst was developed to produce malate, conserving 43% of carbon that would otherwise be lost as CO2. This approach has the potential to reach higher carbon efficiency than microbial production. 3. Public Benefit: The cell-free production of chemicals like serine, glycine, and malate using electrochemically generated formate could significantly reduce CO2 emissions. For example, satisfying the global malate market with this method could avoid approximately 400,000 tons of CO2 emissions annually. This work demonstrates the potential of CFE systems to produce platform chemicals, contributing to environmental sustainability and reducing reliance on petrochemicals. Future Prospects: The CFE-based biocatalyst process could be extended to produce a variety of chemicals, including other industrial di-acids, aromatics, terpenes, alcohols, and polymers. This project showcases the capabilities of cell-free expression systems for prototyping carbon-conserving pathways and sustainably bioproducing platform chemicals, marking a significant step towards economically-viable industrial processes.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Understanding the structural mechanics of ligated DNA crystals via molecular dynamics simulation
DNA self-assembly is a highly programmable method to construct arbitrary architectures based on sequence complementarity. Among various constructs, DNA crystals are macroscopic crystalline materials formed by assembling motifs via sticky end association. Due to their high structural integrity and size ranging from tens to hundreds of micrometers, DNA crystals offer unique opportunities to study the structural properties and deformation behaviors of DNA assemblies. For example, enzymatic ligation of sticky ends can selectively seal nicks resulting in more robust structures with enhanced mechanical properties. However, the research efforts have been mostly on experiments involving different motif designs, structural optimization, or new synthesis methods, while their mechanics are not yet fully understood. The complex properties of DNA crystals are difficult to study via experiments alone, and numerical simulation can complement and aid the experiments. The coarse-grained molecular dynamics (MD) simulation is a powerful tool that can probe the mechanics of DNA assemblies. Here, we investigate DNA crystals made of four different motif lengths with various ligation patterns (full ligation, major directions, connectors, and in-plane) using oxDNA, an open-source, coarse-grained MD platform. We found that several distinct deformation stages emerge in response to mechanical loading and that the number and the location of ligated nucleotides can significantly modulate structural behaviors. These findings should be useful for predicting crystal properties and thus improving the design.
DNA crystal↗
Neuro-Spark: A Submicrosecond Spiking Neural Networks Architecture for In-Sensor Filtering
Neuro-Spark, which is a new neuromorphic architecture with a field-programmable gate array (FPGA) implementation for ultrafast spiking neural network (SNN) inference at the edge, facilitates smart-pixel in-sensor filtering for high-energy physics experiments at the Large Hadron Collider (LHC). Utilizing the evolutionary optimization for neuromorphic systems (EONS) training method, we generate compact SNN models with 91% signal efficiency, akin to convolutional neural networks but with half the parameters. However, deploying near the detector poses a challenge because the SNN must handle a sustained input data rate exceeding 1013 GB/s. To overcome this, we propose a novel hardware architecture that uses high-level synthesis to construct a tuned architecture for the EONS-trained SNN. In addition to the analysis and validation with an AMD Xilinx Artix-A7 FPGA, our solution consumes only ç24% of FPGA LUT and flipflops. We also introduce an innovative quantization method that reduces FPGA resource utilization by ç15% without compromising accuracy. Our FPGA implementation achieves computing latency of ç10 ns for smart-pixel application inference on an edge FPGA.
Miniskar, Narasinga Rao↗
Circularity in Sequence-Controlled Copolyamides Enabled by Regioselective Enzymatic Hydrolysis
Sequence-controlled polymers enable precise control over macromolecular structures and function, but both their synthesis and end-of-life management remain fundamental challenges. Achieving high sequence fidelity is synthetically demanding, and conventional depolymerization methods lack regioselectivity, leading to irreversible loss of encoded molecular information and limiting polymer circularity. Enzymatic catalysis offers a potential solution by combining substrate specificity with selective bond cleavage. Here, we report the synthesis, characterization, and regioselective enzymatic depolymerization of poly- (X,AMA), a sequence-controlled copolyamide composed of alternating hexamethylenediamine−adipic acid (MA) and pxylylenediamine− adipic acid (XA) repeat units. Poly(X,AMA) was synthesized via solid-state polycondensation (SSP) of sequence-defined oligomers, enabling precise control over repeat-unit order. Polymer microstructure and sequence fidelity were confirmed by 13 C NMR spectroscopy and MALDI−TOF mass spectrometry. Comparison with a statistical copolymer analogue and Nylon-66 demonstrated pronounced differences in crystallinity, morphology, and thermal behavior arising from sequence control. Screening of 96 Nylon hydrolase homologues against poly(X,AMA) revealed strongly enzyme-dependent depolymerization profiles. While tetrad formation was generally favored, enzymes displayed pronounced sequence selectivity, preferentially releasing distinct sequence-defined tetrads XAMA or MAXA. SSP of sequence-defined tetrad MAXA produced a copolyamide with near identical monomer ordering as poly(X,AMA). Computational modeling of enzyme−substrate complexes identified structural features consistent with the observed regioselectivity. Together, these results establish selective enzymatic depolymerization as a viable strategy for the circular recycling of sequence-controlled polymers and provide a foundation for the rational engineering of enzymes for programmable polymer deconstruction.
Amides↗
Tuning Anisotropic Optical Properties of Inorganic and Hybrid Organic–Inorganic MXenes via Topochemical Surface Modification
Surface groups are central to the properties of MXenes, yet their role in optical anisotropy remains largely unexplored. Here, we use a topochemical route to synthesize single crystals of stacked Ti 3 C 2 Cl 2 and hybrid organic–inorganic MXenes (h-MXenes) with lateral sizes of 38–75 μm, rotational registry, and tunable interlayer spacing. Solid-state NMR spectroscopy shows that topochemical substitution generates mixed amido, imido, and hydride surface motifs, which modify the electronic structure of the Ti 3 C 2 inorganic core. Imaging spectroscopic ellipsometry with micron-scale spatial resolution enables reconstruction of the complex dielectric tensor of individual multilayer crystals. Ti 3 C 2 Cl 2 exhibits a type-II hyperbolicity above 930 nm, whereas h-MXenes do not display hyperbolicity within the measured 300–1700 nm window, instead showing reduced in-plane conductivity, suppressed out-of-plane light absorption, and a chain-length-dependent blue shift of a near-infrared absorption feature. These results demonstrate topochemical surface modification as a direct handle for engineering MXenes as surface-programmable optical media.
Hybrid materials↗
Selective reduction in epitaxial SrFe 0.5 Co 0.5 O 2.5 and its reversibility
Oxygen-vacancy engineering in transition metal oxides enables programmable functionalities by modulating the valence states and local coordination of constituents. Here, we report the selective reduction of cobalt ions in epitaxial SrFe 0.5 Co 0.5 O 2.5 thin films under reducing gas environments, while iron ions remain unchanged. X-ray absorption spectroscopy reveals an absorption edge shift of 1.65 eV in the Co L-edge upon reduction, and multiplet simulations estimate a decrease in the average Co valence from Co 2.91+ to Co 2.00+ . This site- and element-specific reduction leads to the formation of a structurally distinct oxygen-deficient phase stabilized by oxygen vacancies at tetrahedral sites, as confirmed by density functional theory. Optical spectroscopy reveals an increase in the bandgap from 2.47 eV to 3.04 eV, accompanied by enhanced transparency. Furthermore, simultaneous in situ diffraction and transport measurements confirm fully reversible redox-driven transitions among three phases: reduced defective perovskite, brownmillerite, and oxygen-rich perovskite phases. These findings demonstrate that selective redox control in multi-cation oxides enables the realization of chemically and functionally distinct oxygen-deficient phases.
Fuel cells↗