Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “process damping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Nonlinear Magnetization Dynamics Driven by Strong Terahertz Fields

We present a comprehensive experimental and numerical study of magnetization dynamics in a thin metallic film triggered by single-cycle terahertz pulses of ~20 MV/m electric field amplitude and ~1 ps duration. The experimental dynamics is probed using the femtosecond magneto-optical Kerr effect, and it is reproduced numerically using macrospin simulations. The magnetization dynamics can be decomposed in three distinct processes: a coherent precession of the magnetization around the terahertz magnetic field, an ultrafast demagnetization that suddenly changes the anisotropy of the film, and a uniform precession around the equilibrium effective field that is relaxed on the nanosecond time scale, consistent with a Gilbert damping process. Macrospin simulations quantitatively reproduce the observed dynamics, and allow us to predict that novel nonlinear magnetization dynamics regimes can be attained with existing tabletop terahertz sources.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1988

Requirements for theoretical models of outflows

Recent observational and theoretical investigations of astrophysical mass outflows are reviewed, with a focus on the basic physical principles. Specific limitations on the observational data and their interpretation are listed and discussed. Modeling problems considered include the role of the critical point in determining the mass-loss rate and terminal velocity, the physical processes controlling density at the critical point, the possible coexistence of multiple mass-loss mechanisms, time scales, instabilities and phase changes, multiphase atmospheres and winds, the definition of geometries, the role of the environment, explosive transient events, stochastic phenomena, mode-mode coupling and damping processes, departures from ionization equilibrium, and nonthermal phenomena.

Linsky, Jeffrey L.↗
DOE OSTI2015

Nonlinear damping of a finite amplitude whistler wave due to modified two stream instability

A two-dimensional, fully kinetic, particle-in-cell simulation is used to investigate the nonlinear development of a parallel propagating finite amplitude whistler wave (parent wave) with a wavelength longer than an ion inertial length. The cross field current of the parent wave generates short-scale whistler waves propagating highly oblique directions to the ambient magnetic field through the modified two-stream instability (MTSI) which scatters electrons and ions parallel and perpendicular to the magnetic field, respectively. The parent wave is largely damped during a time comparable to the wave period. The MTSI-driven damping process is proposed as a cause of nonlinear dissipation of kinetic turbulence in the solar wind.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2013

Magnetic and Gilbert damping properties of L{sub 21}-Co{sub 2}FeAl film grown by molecular beam epitaxy

Co{sub 2}FeAl film with L{sub 21} structure was prepared. Its magnetic and Gilbert damping properties were studied by ferromagnetic resonance (FMR) and time-resolved magneto-optical Kerr effect (TR-MOKE), respectively. It is observed that the apparent damping parameter decreases drastically with increasing magnetic field at low field regime and eventually becomes a constant value of 0.004 at high field regime by TR-MOKE measurements. A Gilbert damping parameter of 0.008 in the hard axis by FMR measurement has also been obtained, which is comparable with that extracted from TR-MOKE measurements at low external field, indicating the extrinsic damping processes involved in the low field regime.

36 MATERIALS SCIENCE↗
NASA NTRS1990

Effects of plasma mass flow on Alfven wave phase mixing in coronal loops

Ground-based and space observations suggest that flow phenomena are intrinsic to the solar corona loops. The present analysis addresses flow effects on Alfven wave behavior in coronal loops. The effect of flow on the shear Alfven wave continuum and the associated damping process resulting from phase-mixing is investigated. Flow Doppler-shifts the Alfven wave continuum, thus displacing the range of frequencies for optimum heating. The present study explores Alfven resonance effects on surface waves propagating along coronal loops that are under the influence of flow. Coupling to the Alfven resonance leads to damping of the surface waves. The damping rate in the presence of sub-Alfvenic flows is computed. Flow increases the damping rate of certain modes, thus enhancing the heating effectiveness of those modes. Therefore, these calculations suggest that flow is potentially an important ingredient for an accurate evaluation of heating the solar corona by dissipation of Alfven waves via phase-mixing.

Peredo, M.↗
DOE OSTI2017

Tailored Fano resonance and localized electromagnetic field enhancement in Ag gratings

Metallic gratings can support Fano resonances when illuminated with EM radiation, and their characteristic reflectivity versus incident angle lineshape can be greatly affected by the surrounding dielectric environment and the grating geometry. By using conformal oblique incidence thin film deposition onto an optical grating substrate, it is possible to increase the grating amplitude due to shadowing effects, thereby enabling tailoring of the damping processes and electromagnetic field couplings of the Fano resonances, hence optimizing the associated localized electric field intensity. To investigate these effects we compare the optical reflectivity under resonance excitation in samples prepared by oblique angle deposition (OAD) and under normal deposition (ND) onto the same patterned surfaces. We observe that by applying OAD method, the sample exhibits a deeper and narrower reflectivity dip at resonance than that obtained under ND. This can be explained in terms of a lower damping of Fano resonance on obliquely deposited sample and leads to a stronger localized electric field. This approach opens a fabrication path for applications where tailoring the electromagnetic field induced by Fano resonance can improve the figure of merit of specific device characteristics, e.g. quantum efficiency (QE) in grating-based metallic photocathodes.

36 MATERIALS SCIENCE↗
DOE OSTI2012

The Effects of the Scattering by Edge Plasma Density Fluctuations on Lower Hyybrid Wave Propagation

Scattering effects induced by edge density fluctuations on lower hybrid (LH) wave propagation are investigated. The scattering model used here is based on the work of Bonoli and Ott [Phys. Fluids 25 (1982) 361]. It utilizes an electromagnetic wave kinetic equation solved by a Monte Carlo technique. This scattering model has been implemented in GENRAY , a ray tracing code which explicitly simulates wave propagation, as well as collisionless and collisional damping processes, over the entire plasma discharge, including the scrape-off layer (SOL) that extends from the separatrix to the vessel wall. A numerical analysis of the LH wave trajectories and the power deposition profile with and without scattering is presented for Alcator CMod discharges. Comparisons between the measured hard x-ray emission on Alcator C-Mod and simulations of the data obtained from the synthetic diagnostic included in the GENRAY/CQL3D package are shown, with and without the combination of scattering and collisional damping. Implications of these results on LH current drive are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

CORONAL DENSITY STRUCTURE AND ITS ROLE IN WAVE DAMPING IN LOOPS

It has long been established that gradients in the Alfvén speed, and in particular the plasma density, are an essential part of the damping of waves in the magnetically closed solar corona by mechanisms such as resonant absorption and phase mixing. While models of wave damping often assume a fixed density gradient, in this paper the self-consistency of such calculations is assessed by examining the temporal evolution of the coronal density. It is shown conceptually that for some coronal structures, density gradients can evolve in a way that the wave-damping processes are inhibited. For the case of phase mixing we argue that (a) wave heating cannot sustain the assumed density structure and (b) inclusion of feedback of the heating on the density gradient can lead to a highly structured density, although on long timescales. In addition, transport coefficients well in excess of classical are required to maintain the observed coronal density. Hence, the heating of closed coronal structures by global oscillations may face problems arising from the assumption of a fixed density gradient, and the rapid damping of oscillations may have to be accompanied by a separate (non-wave-based) heating mechanism to sustain the required density structuring.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Chatter Stability of Machining Operations

Here, this paper reviews the dynamics of machining and chatter stability research since the first stability laws were introduced by Tlusty and Tobias in the 1950s. The paper aims to introduce the fundamentals of dynamic machining and chatter stability, as well as the state of the art and research challenges, to readers who are new to the area. First, the unified dynamic models of mode coupling and regenerative chatter are introduced. The chatter stability laws in both the frequency and time domains are presented. The dynamic models of intermittent cutting, such as milling, are presented and their stability solutions are derived by considering the time-periodic behavior. The complexities contributed by highly intermittent cutting, which leads to additional stability pockets, and the contribution of the tool's flank face to process damping are explained. The stability of parallel machining operations is explained. The design of variable pitch and serrated cutting tools to suppress chatter is presented. The paper concludes with current challenges in chatter stability of machining which remains to be the main obstacle in increasing the productivity and quality of manufactured parts.

42 ENGINEERING↗
DOE OSTI2011

K-SHELL PHOTOIONIZATION OF NICKEL IONS USING R-MATRIX

We present R-matrix calculations of photoabsorption and photoionization cross sections across the K edge of the Li-like to Ca-like ion stages of Ni. Level-resolved, Breit-Pauli calculations were performed for the Li-like to Na-like stages. Term-resolved calculations, which include the mass-velocity and Darwin relativistic corrections, were performed for the Mg-like to Ca-like ion stages. This data set is extended up to Fe-like Ni using the distorted wave approximation as implemented by AUTOSTRUCTURE. The R-matrix calculations include the effects of radiative and Auger dampings by means of an optical potential. The damping processes affect the absorption resonances converging to the K thresholds causing them to display symmetric profiles of constant width that smear the otherwise sharp edge at the K-shell photoionization threshold. These data are important for the modeling of features found in photoionized plasmas.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2012

Multiparticle Simulation of Intrabeam Scattering for SuperB

In this communication we present the structure of a multiparticle tracking code to investigate intrabeam scattering effects in low emittance colliders. Simulation results obtained with particular reference to the SuperB parameters are compared with those of conventional IBS theories.and with those of a novel semi-analythical model able to predict IBS effect in terms of emittance growths. Intrabeam scattering (IBS) is associated with multiple small angle scattering events leading to emittance growth. In most electron storage rings, the growth rates arising from IBS are usually much longer than damping times due to synchrotron radiation, and its effect is not observed. However, IBS growth rates increase with bunch charge density, and for machines such as SuperB, that operate with high bunch charges and very low emittances, the IBS growth rates can be large enough to observe significant emittance increase. Several formalisms have been developed for calculating IBS growth rates in storage rings, notably those by Piwinski, Bjorken and Mtingwa, and their high energy approximations. Calculations show that IBS should be manageable in both SuperB rings. However these analytical models, based on Gaussian bunch distributions, cannot investigate some interesting aspects of IBS such as its impact during the damping process and its effect on the beam distribution. We developed a multiparticle tracking code, based on the Zenkevich-Bolshakov algorithm, to investigate these effects. In this communication we present the structure of the code and some simulation results obtained with particular reference to the SuperB parameters. Simulation results are compared with those of conventional IBS theories.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Physics-informed Bayesian machine learning case study: Integral blade rotors

This paper provides a physics-informed Bayesian machine learning (PIBML) description and case study. The PIBML approach applies three physics-based models to establish the initial beliefs before testing to determine the probability of milling stability (or prior). These include: receptance coupling substructure analysis (RCSA) prediction for the tool tip frequency response functions; finite element software prediction of the mechanistic force model coefficients; and a spindle speed-dependent power law model for process damping. Testing was then performed to identify optimal stable machining conditions using an expected improvement in material removal rate criterion. The prior probability of stability was updated using the test results to determine the posterior probability of stability. The test results were compared to the parameter recommendations provided by the endmill manufacturer. A demonstration integral blade rotor was machined at the optimal stable machining conditions for 304 stainless steel and 6061-T6 aluminum. Finally, the disagreement between manufacturer recommendations and milling performance in both materials tested emphasizes the need for broad implementation of PIBML approaches to increase machining productivity and efficiency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

Fast wave heating in the NSTX-Upgrade device

NSTX-Upgrade will operate with toroidal magnetic fields (B{sub T}) up to 1 T, nearly twice the value used in the experiments on NSTX, and the available NBI power will be doubled. The doubling of B{sub T} while retaining the 30 MHz RF source frequency has moved the heating regime from the high harmonic fast wave (HHFW) regime used in NSTX to the mid harmonic fast wave (MHFW) regime. By making use of the full wave code AORSA, this work shows that direct ion damping (mainly by thermal ions localized at the 5th harmonic resonance) might be significant in NSTX-Upgrade under TRANSP predicted full performance conditions and the electron and ion absorption is sensitive to the ratio of electron and ion temperature. Launching at high toroidal wave number appears to be one way to significantly reduce the ion damping. By using the extended AORSA code, which includes a detailed description of the scrape-off layer in the field solutions, we found a large electric field amplitude outside of the last closed flux surface as previously seen in NSTX from AORSA simulations (D. L. Green, et al, Phys. Rev. Lett. 107, 145001 (2011)). Preliminary results by introducing a collision damping in the scrape-off layer in the AORSA code to represent a damping process are presented, showing for the first time absorbed power in the scrape-off layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Full wave simulations of fast wave efficiency and power losses in the scrape-off layer of tokamak plasmas in mid/high harmonic and minority heating regimes

Here, several experiments on different machines and in different fast wave (FW) heating regimes, such as hydrogen minority heating and high harmonic fast waves (HHFW), have found strong interaction between radio-frequency (RF) waves and the scrape-off layer (SOL) region. This paper examines the propagation and the power loss in the SOL by using the full wave code AORSA, in which the edge plasma beyond the last closed flux surface (LCFS) is included in the solution domain and a collisional damping parameter is used as a proxy to represent the real, and most likely nonlinear, damping processes. 2D and 3D AORSA results for the National Spherical Torus eXperiment (NSTX) have shown a strong transition to higher SOL power losses (driven by the RF field) when the FW cut-off is removed from in front of the antenna by increasing the edge density. Here, full wave simulations have been extended for 'conventional' tokamaks with higher aspect ratios, such as the DIII-D, Alcator C-Mod, and EAST devices. DIII-D results in HHFW regime show similar behavior found in NSTX and NSTX-U, consistent with previous DIII-D experimental observations. In contrast, a different behavior has been found for C-Mod and EAST, which operate in the minority heating regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Ion Heating and Flow Driven by an Instability Found in Plasma Couette Flow

Here, we present the first observation of instability in weakly magnetized, pressure dominated plasma Couette flow firmly in the Hall regime. Strong Hall currents couple to a low frequency electromagnetic mode that is driven by high-β (>1) pressure profiles. Spectroscopic measurements show heating (factor of 3) of the cold, unmagnetized ions via a resonant Landau damping process. A linear theory of this instability is derived that predicts positive growth rates at finite β and shows the stabilizing effect of very large β, in line with observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2013

Generation of spin motive force in a soliton lattice

The generation of a spin motive force in a chiral helimagnet due to the action of two crossed magnetic fields is considered. The cases of pulsed and periodic magnetic fields directed along the helical axis under a perpendicular dc field are analyzed. It is shown that, in the case of a pulsed field, the spin motive force is related to dissipation, whereas in a periodic field, there is a reactive component that is not related to damping processes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Measurement of Energy Reduction of Inertial Alfvén Waves Propagating through Parallel Gradients in the Alfvén Speed

We have studied the propagation of inertial Alfvén waves through parallel gradients in the Alfvén speed using the Large Plasma Device at the University of California, Los Angeles. The reflection and transmission of Alfvén waves through inhomogeneities in the background plasma are important for understanding wave propagation, turbulence, and heating in space, laboratory, and astrophysical plasmas. Here we present inertial Alfvén waves under conditions relevant to solar flares and the solar corona. We find that the transmission of the inertial Alfvén waves is reduced as the sharpness of the gradient is increased. Any reflected waves were below the detection limit of our experiment, and reflection cannot account for all of the energy not transmitted through the gradient. Our findings indicate that, for both kinetic and inertial Alfvén waves, the controlling parameter for the transmission of the waves through an Alfvén speed gradient is the ratio of the Alfvén wavelength along the gradient divided by the scale length of the gradient. Furthermore, our results suggest that an as-yet-unidentified damping process occurs in the gradient.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Surrogate Modeling of Landau Damping with Deep Operator Networks

Kinetic simulations excel at capturing microscale plasma physics phenomena with high accuracy, but their computational demands make them impractical for modeling large-scale space and astrophysical systems. In this context, we build a surrogate model, using Deep Operator Networks (DeepONets), based upon the Vlasov–Poisson simulation data to model the dynamical evolution of plasmas, focusing on the Landau damping process—a fundamental kinetic phenomenon in space and astrophysical plasmas. The trained DeepONets are able to capture the evolution of electric field energy in both linear and nonlinear regimes under various conditions. Extensive validation highlights DeepONets’ robust performance in reproducing complex plasma behaviors with high accuracy, paving the way for large-scale modeling of space and astrophysical plasmas.

plasma astrophysics↗