Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “prepare”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Survey of application of radiation to preparative chemistry

The use of radiation for preparative chemistry in liquid solutions is investigated. General principles are presented and preparations involving reduction, oxidation, polymerization, and decomposition are given. The use of various solvents, water, other inorganic liquids and organic liquids for this purpose is discussed. Finally, a commentary is made on some specific applications where radiation chemistry as a preparative technique may be useful.

Philipp, W. H.↗
NASA NTRS1973

Preparation of ultra small samples for optical and microprobe analysis

This paper describes a simple but satisfactory new method for the preparation of tiny, varied and specialized specimens for electron or ion-microprobe analysis developed over the past five years. Microtektites, individual chondrules, single grains, blebs from lunar samples and meteoritic minerals have been prepared by this technique. A description of the preparation of these usually difficult samples from the initial mounting through the various polishing steps to their final polish is presented in detail. The procedures used to prevent any contamination of these specimens by the polishing agents and to prevent cross contamination to the other samples used for geochronology studies are presented.

Inman, C. S.↗
NASA NTRS1981

Process for preparation of large-particle-size monodisperse latexes

Monodisperse latexes having a particle size in the range of 2 to 40 microns are prepared by seeded emulsion polymerization in microgravity. A reaction mixture containing smaller monodisperse latex seed particles, predetermined amounts of monomer, emulsifier, initiator, inhibitor and water is placed in a microgravity environment, and polymerization is initiated by heating. The reaction is allowed to continue until the seed particles grow to a predetermined size, and the resulting enlarged particles are then recovered. A plurality of particle-growing steps can be used to reach larger sizes within the stated range, with enlarge particles from the previous steps being used as seed particles for the succeeding steps. Microgravity enables preparation of particles in the stated size range by avoiding gravity related problems of creaming and settling, and flocculation induced by mechanical shear that have precluded their preparation in a normal gravity environment.

Vanderhoff, J. W.↗
NASA NTRS1984

Preparation and evaluation of advanced catalysts for phosphoric acid fuel cells

The platinum electrocatalysts were characterized for their crystallite sizes and the degree of dispersion on the carbon supports. One application of these electrocatalysts was for anodic oxidation of hydrogen in hot phosphoric acid fuel cells, coupled with the influence of low concentrations of carbon monoxide in the fuel gas stream. In a similar way, these platinum on carbon electrocatalysts were evaluated for oxygen reduction in hot phosphoric acid. Binary noble metal alloys were prepared for anodic oxidation of hydrogen and noble metal-refractory metal mixtures were prepared for oxygen reduction. An exemplar alloy of platinum and palladium (50/50 atom %) was discovered for anodic oxidation of hydrogen in the presence of carbon monoxide, and patent disclosures were submitted. For the cathode, platinum-vanadium alloys were prepared showing improved performance over pure platinum. Preliminary experiments on electrocatalyst utilization in electrode structures showed low utilization of the noble metal when the electrocatalyst loading exceeded one weight percent on the carbon.

Stonehart, P.↗
NASA NTRS1986

Acetylene (ethynyl) terminated polyimide siloxane and process for preparation thereof

Siloxane containing addition polyimides having improved physical property characteristics of flexibility, drape, tack, and toughness and the process for preparing and utilizing the same are disclosed. The novelty of this invention appears to reside in the composition and process of preparing addition type polyimides useful as structural adhesives as well as composite matrix materials and the process of preparing the same.

Stclair, T. L.↗
NASA NTRS1986

Automation of preparation of nonmetallic samples for analysis by atomic absorption and inductively coupled plasma spectrometry

For a rapid preparation of solutions intended for analysis by inductively coupled plasma emission spectrometry or atomic absorption spectrometry, an automatic device called Plasmasol was developed. This apparatus used the property of nonwettability of glassy C to fuse the sample in an appropriate flux. The sample-flux mixture is placed in a composite crucible, then heated at high temperature, swirled until full dissolution is achieved, and then poured into a water-filled beaker. After acid addition, dissolution of the melt, and filling to the mark, the solution is ready for analysis. The analytical results obtained, either for oxide samples or for prereduced iron ores show that the solutions prepared with this device are undistinguished from those obtained by manual dissolutions done by acid digestion or by high temperature fusion. Preparation reproducibility and analytical tests illustrate the performance of Plasmasol.

Wittmann, A.↗
NASA NTRS1987

Preparation of bis(4-(3,4 dimethylene pyrrolidyl) phenyl) methane as a high temperature reactive oligomer

A major goal in the field of high temperature polymers was to prepare aromatic polyimides that can be easily fabricated with the required thermal and physical properties for aerospace applications. Recent research was directed to achieve polyimides that are: soluable in a common organic solvent; melt-processable; and thermally curable without the evolution of volatile by-products. A monomer, N-phenyl 3,4-dimethylene pyrrolidine, that can be modified to form a bis (exocyclodiene) I for the preparation of polyimides by the Diels-Alder process was developed. Preparation of high temperature polymeric materials by Diels-Alder polymerization that will maintain their integrity and toughness during long exposure time at elevated temperature is sought.

Ottenbrite, Raphael M.↗
NASA NTRS1987

On the absence of convective stability in materials preparation on earth

The yield in the production and the performance of electronic and optical solid state devices is frequently limited by nonuniformities in the composition and structure of the underlying crystalline material. The formation of such inhomogeneities can be favored by convective heat and mass transfer during the preparation. Hence, it is often desirable to establish purely diffusive conditions in materials preparation. It has been thought that buoyancy-driven convection can be readily excluded by appropriate orientation of the density gradient with respect to the gravity vector. Such expectations overlook, however, that materials preparation processes are inherently associated with multidimensional density gradients. Hence, it is concluded, there will always be convective contributions to transport in materials processing on earth.

Rosenberger, Franz↗
NASA NTRS1988

Effect of substrate preparation on the structure and chemisorption properties of Pd/MgO model catalyst

Pd/MgO model catalysts are prepared by vapor deposition of Pd particles on MgO thin films which are deposited, at different temperatures, on UHV cleaved mica. MgO films and Pd particles are characterized in situ by Auger electron spectroscopy and energy-loss spectroscopy and ex situ by transmission electron microscopy. Succesive temperature programmed desorption (TPD) of CO shows a different evolution of the morphology of the Pd particles deposited on MgO films prepared at low and high temperature. In addition, on MgO prepared at low temperature, the smallest particles show a continuous decay of CO adsorption during TPD due to contamination by support species.

Henry, C. R.↗
NASA NTRS1988

Preparation of dilute magnetic semiconductor films by metalorganic chemical vapor deposition

A method for preparation of a dilute magnetic semiconductor (DMS) film is provided, in which a Group II metal source, a Group VI metal source and a transition metal magnetic ion source are pyrolyzed in the reactor of a metalorganic chemical vapor deposition (MOCVD) system by contact with a heated substrate. As an example, the preparation of films of Cd(sub 1-x)Mn(sub x)Te, in which 0 is less than or equal to x less than or equal to 0.7, on suitable substrates (e.g., GaAs) is described. As a source of manganese, tricarbonyl (methylcyclopentadienyl) manganese (TCPMn) is employed. To prevent TCPMn condensation during its introduction into the reactor, the gas lines, valves and reactor tubes are heated. A thin-film solar cell of n-i-p structure, in which the i-type layer comprises a DMS, is also described; the i-type layer is suitably prepared by MOCVD.

Nouhi, Akbar↗
NASA NTRS1990

Preparation and characteristics of superconducting cuprate thin films: Nd(2-x)Ce(x)CuO4 and substituted Bi-system

Characteristics of the electron-doped-type Nd(2-x)Ce(x)CuO4 systems and substituted Bi2(Sr,Ln)3Cu2Oy system were systematically studied using the high quality thin-film samples. The Nd(2-x)Ce(x)CuO4 thin films with various Ce concentrations, x, were prepared by RF magnetron sputtering on SrTiO3 heated at around 500 C. After subsequent annealing at 1100 C in air, the films showed the c-axis orientation normal to the substrates. By means of the reducing treatment (annealing in a vacuum), superconductivity was induced for the films with 0.14 is less than or equal to x is less than or equal to 0.18. The superconductivity and transport properties of the films were strongly affected by the reducing treatment. The x = 0.15 film exhibited a sharp superconducting transition with zero resistivity at 22 K, in consistent with the diamagnetic properties. The resistivity of the films was fairly low with metallic characteristics, and the sight of the Hall coefficient was negative in the normal state. On the other hand, the normal-state optical measurements showed that the undoped Nd2CuO4 is a semiconductor with a charge transfer gap of 1.3 eV, and that, when Ce ions were doped, a plasma reflection due to the free-carriers came to be seen with the plasma frequency of 1.07 eV for 0.14 is less than or equal to x is less than or equal to 0.18. Moreover, x ray photoemission study revealed that the Cu valence of the film decreased for 2(+) for x = 0 to 1(+) for x = 0.15. These physical properties are in contrast with those of hole-doped-type cuprate superconductors. Bi2(Sr,Ln)3Cu2Oy thin films were also prepared on MgO substrates heated at 600 to 700 C by similar methods. It was found that the growth conditions for Bi-systems with two CuO2 planes were different for each composition and species of lanthanoid in the films. Moreover, preparation of Bi-system with three CuO2 planes was very difficult when lanthanoid atoms were doped in the system. Their electric transport properties and x ray photoemission spectroscopy were investigated. Carrier concentration and Cu valence were discussed with regard to the superconductivity.

Adachi, H.↗
NASA NTRS1991

Modeling preparation costs for space missions by using major cost drivers

A model is suggested for making long range planning cost estimates for Deep Space Network (DSN) support of future space missions. The model is a function of major mission cost drivers, such as maintenance and operations, downlink frequency upgrade, uplink frequency upgrade, telemetry upgrade, antenna gain/noise temperature, radiometric accuracy upgrade, radio science upgrade, and very long baseline interferometry. The model is derived from actual cost data from three space missions: Voyager (Uranus), Voyager (Neptune), and Magellan. The model allows one to estimate the total cost and the cost over time of a similar future space mission. The model was back tested against the three projects and gave cost estimates that range from 17 pct. below to 19 pct. above actual mission preparation costs. The model was also compared with two other independent projects: Mariner Jupiter/Saturn (MJS later became Voyager) and Viking. The model gave total preparation cost estimates that range from 15 pct. above to 4 pct. below actual total preparation costs for MJS and Viking, respectively.

Sherif, J. S.↗
NASA NTRS1991

Intranasal scopolamine preparation and method

A new method and preparation for intranasal delivery of scopolamine provides a safe and effective treatment for motion sickness and other conditions requiring anticholinergic therapy. The preparation can be in the form of aqueous nasal drops, mist spray, gel or oinment. Intranasal delivery of scopolamine has similar bioavailability and effect of intravenous delivery and is far superior to oral dosage. Scopolamine is prepared in a buffered saline solution at the desired dosage rate for effective anticholinergic response.

Putcha, Lakshmi↗
NASA NTRS1991

Microstructure and magnetization of Y-Ba-Cu-O prepared by melt quenching, partial melting and doping

Y-Ba-Cu-O samples prepared by means of a variety of melt-based techniques exhibit high values for their magnetic properties compared with those of samples prepared by solid state sintering. These techniques include single-stage partial melting as well as melt quenching followed by a second heat treatment stage, and they have been applied to the stoichiometric 123 composition as well as to formulations containing excess yttrium or other dopants. The structure of these melt-based samples is highly aligned, and the magnetization readings exhibit large anisotropy. At 77 K and magnetic field intensities of about 2 kOe, diamagnetic susceptibilities as high as -14 x 10(exp -3) emu/g were obtained in the cases of melt-quenched samples and remanent magnetization values as high as 10 emu/g for samples prepared by partial melting.

Hojaji, Hamid↗
NASA NTRS1993

Process to prepare 1,3-diamino-5-pentafluorosulfanylbenzene

A process was developed to prepare 1,3-diamino- 5-pentafluoro sulfanylbenzene. This process involved two steps: preparing the dinitro compound, 1,3-dinitro- 5-pentafluoro sulfanylbenzene, and reducing this compound to form the corresponding diamine. This diamine was reacted with various dianhydrides, diacidchlorides, and epoxy resins to form polyimides, polyamides, and cross linked epoxies. These polymers were used to prepare semi-permeable membranes, wire coatings, and films.

St.clair, Terry L.↗
NASA NTRS1993

Synchrotron/crystal sample preparation

The Center for Applied Optics (CAO) of the University of Alabama in Huntsville (UAH) prepared this final report entitled 'Synchrotron/Crystal Sample Preparation' in completion of contract NAS8-38609, Delivery Order No. 53. Hughes Danbury Optical Systems (HDOS) is manufacturing the Advanced X-ray Astrophysics Facility (AXAF) mirrors. These thin-walled, grazing incidence, Wolter Type-1 mirrors, varying in diameter from 1.2 to 0.68 meters, must be ground and polished using state-of-the-art techniques in order to prevent undue stress due to damage or the presence of crystals and inclusions. The effect of crystals on the polishing and grinding process must also be understood. This involves coating special samples of Zerodur and measuring the reflectivity of the coatings in a synchrotron system. In order to gain the understanding needed on the effect of the Zerodur crystals by the grinding and polishing process, UAH prepared glass samples by cutting, grinding, etching, and polishing as required to meet specifications for witness bars for synchrotron measurements and for investigations of crystals embedded in Zerodur. UAH then characterized these samples for subsurface damage and surface roughness and figure.

Johnson, R. Barry↗
NASA NTRS1994

Modeling actions and operations to support mission preparation

This paper describes two linked technology development projects to support Space Shuttle ground operations personnel, both during mission preparation analysis and related analyses in missions. The Space Propulsion Robust Analysis Tool (SPRAT) will provide intelligent support and automation for mission analysis setup, interpretation, reporting and documentation. SPRAT models the actions taken by flight support personnel during mission preparation and uses this model to generate an action plan. CONFIG will provide intelligent automation for procedure analyses and failure impact analyses, by simulating the interactions between operations and systems with embedded failures. CONFIG models the actions taken by crew during space vehicle malfunctions and simulates how the planned action sequences in procedures affect a device model. Jointly the SPRAT and CONFIG projects provide an opportunity to investigate how the nature of a task affects the representation of actions, and to determine a more general action representation supporting a broad range of tasks. This paper describes the problems in representing actions for mission preparation and their relation to planning and scheduling.

Malin, Jane T.↗