Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “powered descent guidance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

The Mars 2020 Perseverance Navigation Filter

The Mars 2020 (M2020) Entry Descent and Landing (EDL) system delivered a rover named “Perseverance” at Jezero crater (Mars) on February 18th, 2021. M2020 EDL used a Guidance Navigation and Control (GN&C) system to achieve its landing target objectives. The navigation filter (NavFilter) integrated Descent Inertial Measurement Unit (DIMU) measurements to estimate position and attitude. The NavFilter also used the Terminal Descent Sensor (TDS) to es-timate surface-relative position and velocity corrections. The NavFilter provided all of the dynamic state information to the entry controller, entry guidance, Lander Vision System (LVS) and powered descent guidance and control algo-rithms. The NavFilter for Perseverance is based on Curiosity’s NavFilter with a couple of modifications.

Casoliva, Jordi↗

NASA Tech Briefs, December 2011

Topics covered include: 1) SNE Industrial Fieldbus Interface; 2) Composite Thermal Switch; 3) XMOS XC-2 Development Board for Mechanical Control and Data Collection; 4) Receiver Gain Modulation Circuit; 5) NEXUS Scalable and Distributed Next-Generation Avionics Bus for Space Missions; 6) Digital Interface Board to Control Phase and Amplitude of Four Channels; 7) CoNNeCT Baseband Processor Module; 8) Cryogenic 160-GHz MMIC Heterodyne Receiver Module; 9) Ka-Band, Multi-Gigabit-Per-Second Transceiver; 10) All-Solid-State 2.45-to-2.78-THz Source; 11) Onboard Interferometric SAR Processor for the Ka-Band Radar Interferometer (KaRIn); 12) Space Environments Testbed; 13) High-Performance 3D Articulated Robot Display; 14) Athena; 15) In Situ Surface Characterization; 16) Ndarts; 17) Cryo-Etched Black Silicon for Use as Optical Black; 18) Advanced CO2 Removal and Reduction System; 19) Correcting Thermal Deformations in an Active Composite Reflector; 20) Umbilical Deployment Device; 21) Space Mirror Alignment System; 22) Thermionic Power Cell To Harness Heat Energies for Geothermal Applications; 23) Graph Theory Roots of Spatial Operators for Kinematics and Dynamics; 24) Spacesuit Soft Upper Torso Sizing Systems; 25) Radiation Protection Using Single-Wall Carbon Nanotube Derivatives; 26) PMA-PhyloChip DNA Microarray to Elucidate Viable Microbial Community Structure; 27) Lidar Luminance Quantizer; 28) Distributed Capacitive Sensor for Sample Mass Measurement; 29) Base Flow Model Validation; 30) Minimum Landing Error Powered-Descent Guidance for Planetary Missions; 31) Framework for Integrating Science Data Processing Algorithms Into Process Control Systems; 32) Time Synchronization and Distribution Mechanisms for Space Networks; 33) Local Estimators for Spacecraft Formation Flying; 34) Software-Defined Radio for Space-to-Space Communications; 35) Reflective Occultation Mask for Evaluation of Occulter Designs for Planet Finding; and 36) Molecular Adsorber Coating

Source record↗

Enhanced Fuel-Optimal Trajectory-Generation Algorithm for Planetary Pinpoint Landing

An enhanced algorithm is developed that builds on a previous innovation of fuel-optimal powered-descent guidance (PDG) for planetary pinpoint landing. The PDG problem is to compute constrained, fuel-optimal trajectories to land a craft at a prescribed target on a planetary surface, starting from a parachute cut-off point and using a throttleable descent engine. The previous innovation showed the minimal-fuel PDG problem can be posed as a convex optimization problem, in particular, as a Second-Order Cone Program, which can be solved to global optimality with deterministic convergence properties, and hence is a candidate for onboard implementation. To increase the speed and robustness of this convex PDG algorithm for possible onboard implementation, the following enhancements are incorporated: 1) Fast detection of infeasibility (i.e., control authority is not sufficient for soft-landing) for subsequent fault response. 2) The use of a piecewise-linear control parameterization, providing smooth solution trajectories and increasing computational efficiency. 3) An enhanced line-search algorithm for optimal time-of-flight, providing quicker convergence and bounding the number of path-planning iterations needed. 4) An additional constraint that analytically guarantees inter-sample satisfaction of glide-slope and non-sub-surface flight constraints, allowing larger discretizations and, hence, faster optimization. 5) Explicit incorporation of Mars rotation rate into the trajectory computation for improved targeting accuracy. These enhancements allow faster convergence to the fuel-optimal solution and, more importantly, remove the need for a "human-in-the-loop," as constraints will be satisfied over the entire path-planning interval independent of step-size (as opposed to just at the discrete time points) and infeasible initial conditions are immediately detected. Finally, while the PDG stage is typically only a few minutes, ignoring the rotation rate of Mars can introduce 10s of meters of error. By incorporating it, the enhanced PDG algorithm becomes capable of pinpoint targeting.

Acikmese, Behcet↗

NASA Tech Briefs, Februrary 2013

Topics covered include: Measurements of Ultra-Stable Oscillator (USO) Allan Deviations in Space; Gaseous Nitrogen Orifice Mass Flow Calculator; Validation of Proposed Metrics for Two-Body Abrasion Scratch Test Analysis Standards; Rover Low Gain Antenna Qualification for Deep Space Thermal Environments; Automated, Ultra-Sterile Solid Sample Handling and Analysis on a Chip; Measuring and Estimating Normalized Contrast in Infrared Flash Thermography; Spectrally and Radiometrically Stable, Wideband, Onboard Calibration Source; High-Reliability Waveguide Vacuum/Pressure Window; Methods of Fabricating Scintillators With Radioisotopes for Beta Battery Applications; Magnetic Shield for Adiabatic Demagnetization Refrigerators (ADR); CMOS-Compatible SOI MESFETS for Radiation-Hardened DC-to-DC Converters; Silicon Heat Pipe Array; Adaptive Phase Delay Generator; High-Temperature, Lightweight, Self-Healing Ceramic Composites for Aircraft Engine Applications; Treatment to Control Adhesion of Silicone-Based Elastomers; High-Temperature Adhesives for Thermally Stable Aero-Assist Technologies; Rockballer Sample Acquisition Tool; Rock Gripper for Sampling, Mobility, Anchoring, and Manipulation; Advanced Magnetic Materials Methods and Numerical Models for Fluidization in Microgravity and Hypogravity; Data Transfer for Multiple Sensor Networks Over a Broad Temperature Range; Using Combustion Synthesis to Reinforce Berms and Other Regolith Structures; Visible-Infrared Hyperspectral Image Projector; Three-Axis Attitude Estimation With a High-Bandwidth Angular Rate Sensor Change_Detection.m; AGATE: Adversarial Game Analysis for Tactical Evaluation; Ionospheric Simulation System for Satellite Observations and Global Assimilative; Modeling Experiments (ISOGAME); An Extensible, User- Modifiable Framework for Planning Activities; Mission Operations Center (MOC) - Precipitation Processing System (PPS) Interface Software System (MPISS); Automated 3D Damaged Cavity Model Builder for Lower Surface Acreage Tile on Orbiter; Mixed Linear/Square-Root Encoded Single-Slope Ramp Provides Low-Noise ADC with High Linearity for Focal Plane Arrays; RUSHMAPS: Real-Time Uploadable Spherical Harmonic Moment Analysis for Particle Spectrometers; Powered Descent Guidance with General Thrust-Pointing Constraints; X-Ray Detection and Processing Models for Spacecraft Navigation and Timing; and Extreme Ionizing-Radiation-Resistant Bacterium

Source record↗

NASA Tech Briefs, April 2013

Topics covered include: Fully Integrated, Miniature, High-Frequency Flow Probe Utilizing MEMS Leadless SOI Technology; Nanoscale Surface Plasmonics Sensor With Nanofluidic Control; Advanced Dispersed Fringe Sensing Algorithm for Coarse Phasing Segmented Mirror Telescopes; Neural Network Back-Propagation Algorithm for Sensing Hypergols; Bulk Moisture and Salinity Sensor; Change-Based Satellite Monitoring Using Broad Coverage and Targetable Sensing; Circularly Polarized Microwave Antenna Element with Very Low Off-Axis Cross-Polarization; Ultra-Low Heat-Leak, High-Temperature Superconducting Current Leads for Space Applications; Flash Cracking Reactor for Waste Plastic Processing; An Automated Safe-to-Mate (ASTM) Tester; Wireless Chalcogenide Nanoionic-Based Radio-Frequency Switch; Compute Element and Interface Box for the Hazard Detection System; DOT Transmit Module; Composite Aerogel Multifoil Protective Shielding; Li-Ion Electrolytes with Improved Safety and Tolerance to High-Voltage Systems; Polymer-Reinforced, Non-Brittle, Lightweight Cryogenic Insulation; Controlled, Site-Specific Functionalization of Carbon Nanotubes with Diazonium Salts; Regenerable Sorbent for CO2 Removal; Sprayable Aerogel Bead Compositions With High Shear Flow Resistance and High Thermal Insulation Value; Lexan Linear Shaped Charge Holder with Magnets and Backing Plate; Robotic Ankle for Omnidirectional Rock Anchors; Wind, Wave, and Tidal Energy Without Power Conditioning; An Active Heater Control Concept to Meet IXO Type Mirror Module Thermal-Structural Distortion Requirement; Waterless Clothes-Cleaning Machine; Integrated Electrical Wire Insulation Repair System; LVGEMS Time-of-Flight Mass Spectrometry on Satellites; Surface Inspection Tool for Optical Detection of Surface Defects; Per-Pixel, Dual-Counter Scheme for Optical Communications; Certification-Based Process Analysis; Surface Navigation Using Optimized Waypoints and Particle Swarm Optimization; Smart-Divert Powered Descent Guidance to Avoid the Backshell Landing Dispersion Ellipse; Estimating Foreign-Object-Debris Density from Photogrammetry Data; Adaptive Sampling of Spatiotemporal Phenomena with Optimization Criteria; Building a 2.5D Digital Elevation Model From 2D Imagery; Eyes on the Earth 3D; Target Trailing With Safe Navigation for Maritime Autonomous Surface Vehicles; Adams-Based Rover Terramechanics and Mobility Simulator - ARTEMIS; ISTP CDF Skeleton Editor; Uplink Summary Generator (ULSGEN) Version 1.0; Robotics On-Board Trainer (ROBoT); Software Engineering Tools for Scientific Models; Automatic Data Filter Customization Using a Genetic Algorithm; Tracker Toolkit; Towards Efficient Scientific Data Management Using Cloud Storage; On a Formal Tool for Reasoning About Flight Software Cost Analysis; A Nanostructured Composites Thermal Switch Controls Internal and External Short Circuit in Lithium Ion Batteries; Spacecraft Crew Cabin Condensation Control; and Functional Near-Infrared Spectroscopy Signals Measure Neuronal Activity in the Cortex.

Source record↗

Implementation of a Six Degree of Freedom Precision Lunar Landing Algorithm Using Dual Quaternion Representation

In this study, a powered descent guidance algorithm using a unit dual quaternion represen- tation of the vehicle dynamics is implemented in a high-fidelity simulation and on representative flight hardware. This Dual-Quaternion Guidance (DQG) algorithm is applied to the precision lunar landing problem which levies complex constraints upon the trajectory, including state triggered attitude constraints to enable terrain-relative navigation and hazard detection as well as real-time requirements for landing site re-designation. The investigation explores DQG’s usefulness as a mission design tool as well as a real-time guidance algorithm and defines real-time performance requirements for the hazard detection and avoidance (HDA) re-targeting phase of precision lunar landing. The experiment is presented in two parts. First, DQG is implemented within a high-fidelity Monte Carlo simulation to tune the algorithm’s parameters for the simulated vehicle, to refine the mission design, and to develop guidance update timing requirements to perform the HDA maneuver. DQG generates trajectories online for the divert which are tracked by the vehicle’s inner-loop controllers to the targeted landing site. Second, DQG is run on representative hardware to demonstrate real-time operation through a divert maneuver. These results allow for rapid, flexible, optimal mission design satisfying complex constraints, and for the definition of real-time performance requirements for the HDA operations inherent in precision lunar landing. The HDA divert maneuver is found to require guidance trajectory updates in less than three seconds. DQG is found to be too slow to meet this update timing on the descent and landing computer (DLC) in its current implementation. DQG running on alternative hardware can meet the update rate requirement. Algorithm implementation improvements are also recommended which are expected to speed up computation sufficiently to meet requirements on the DLC.

GN&C↗

Tutorial: MATLAB Implementation of a Successive Convexification Algorithm for 3 DoF Rocket Landings

The primary objective of this work is to fill in gaps and explore an alternate way of solving the 3 DoF rocket-powered landing problem presented in the 2016 AIAA paper by Szmuk, Ackimese, and Berning using successive convexification (SCvx). In the original paper, CVX, an automatic parsing package, was used to transcribe the high-level trajectory optimization problem into a format that could be read by a conic solver. The parsing step, generally computationally intensive, is hidden from the user. The use of CVX is sufficient for the generation of trajectories off-line due to the lack of runtime and flight software implementation constraints. For on-line applications, it is necessary to parse the problem for flight software implementation. References on hand-parsing powered descent guidance (PDG) problems are sparse. In this Tech Memo, the process of transcribing the 3 DoF PDG problem into the format required by MATLAB’s built-in second-order cone solver, coneprog.m, is presented in detail. Due to the abridged 3 DoF dynamics and the relatively simple nonlinearities, this reference is the natural starting point for anyone interested in grasping the concepts behind SCvx pertaining to PDG and the parsing step. Simulation results shown in this report were independently created by solving the problem using coneprog.m. The intent of this memo is to serve as a supplemental material to the original paper by breaking down the concept behind successive convexification and shed light into the parsing process. Readers are encouraged to first familiarize themselves with the material laid out in the original reference.

Alex Hayes↗

Robust Trajectory Optimization for Guided Powered Descent and Landing

A robust trajectory optimization approach for guidance algorithm gain selection for powered descent and landing is developed. This approach uses a genetic algorithm to determine optimal guidance algorithm parameters while incorporating uncertainty information from linear covariance analysis. The optimal guidance algorithm parameters are determined while accounting for environment, navigation, and vehicle property uncertainty and sensor suite fidelity. As a demonstration of this method, the optimal gains for the fractional polynomial powered descent guidance are found for the braking phase of a robotic lunar landing mission. Scenarios with differing sensor suites and sensor qualities are considered, with objective functions to minimize variability in propellant usage or terminal position. Results show that the optimal guidance algorithm gains for a given trajectory differ based on the sensor suite, and optimal guidance algorithm gains may result in up to 20% performance improvements over the baseline in propellant usage and landed accuracy.

Grace E Calkins↗

Toward Improved Landing Precision on Mars

Mars landers to date have flown ballistic entry trajectories with no trajectory control after the final maneuver before entry. Improvements in landing accuracies (from approx.150 km from the target for Mars Pathfinder to approx.30-40 km for MER and Phoenix) have been driven by approach navigation improvements. MSL will fly the first guided-entry trajectory to Mars, further improving accuracy to approx.10-12 km from the target.

powered descent guidance↗

Low Lift-to-Drag Morphing Shape Design

One advantage of the low lift-to-drag (L/D) inflatable vehicle being evaluated for the human Mars Entry, Descent, and Landing Architecture Study (EDLAS) is the lower launch mass compared to the other concepts being considered. Mass reduction is achieved by using a strong but lightweight inflatable structure and by eliminating the need for a backshell. Performance analysis has shown that additional mass savings is achievable using entry guidance technologies that reduce powered descent propellant mass by directly controlling angle of attack and sideslip, rather than the traditional bank angle control approach used by the current state-of-the-art Mars Science Laboratory entry vehicle. Two methods of implementing this guidance scheme are presented, one uses aerodynamic flaps, the other changes or morphs the shape of the inflatable aeroshell during flight. This paper describes both control methods for the EDLAS low-L/D vehicle, including the aerodynamic model of the aerosurfaces and various methods to achieve the morphing shape deflection (internal motors, shifting tori, etc.). Results of trajectory performance simulations for both the aerodynamic flap and morphing designs are also presented along with details of mechanical implementation options available to ground test the system.

Alicia Dwyer Cianciolo↗