Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pointing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Using Lunar Observations to Validate Pointing Accuracy and Geolocation, Detector Sensitivity Stability and Static Point Response of the CERES Instruments

Validation of in-orbit instrument performance is a function of stability in both instrument and calibration source. This paper describes a method using lunar observations scanning near full moon by the Clouds and Earth Radiant Energy System (CERES) instruments. The Moon offers an external source whose signal variance is predictable and non-degrading. From 2006 to present, these in-orbit observations have become standardized and compiled for the Flight Models -1 and -2 aboard the Terra satellite, for Flight Models-3 and -4 aboard the Aqua satellite, and beginning 2012, for Flight Model-5 aboard Suomi-NPP. Instrument performance measurements studied are detector sensitivity stability, pointing accuracy and static detector point response function. This validation method also shows trends per CERES data channel of 0.8% per decade or less for Flight Models 1-4. Using instrument gimbal data and computed lunar position, the pointing error of each detector telescope, the accuracy and consistency of the alignment between the detectors can be determined. The maximum pointing error was 0.2 Deg. in azimuth and 0.17 Deg. in elevation which corresponds to an error in geolocation near nadir of 2.09 km. With the exception of one detector, all instruments were found to have consistent detector alignment from 2006 to present. All alignment error was within 0.1o with most detector telescopes showing a consistent alignment offset of less than 0.02 Deg.

Daniels, Janet L.↗
DOE OSTI2025

Spontaneous Localization at a Potential Saddle Point from Edge State Reconstruction in a Quantum Hall Point Contact

Quantum point contacts (QPCs) are an essential component in mesoscopic devices. Here, in this work, we study the transmission of quantum Hall edge modes through a gate-defined QPC in monolayer graphene. We observe resonant tunneling peaks and a nonlinear conductance pattern characteristic of Coulomb-blockaded localized states. The in-plane electric polarizability reveals the states are localized at a classically unstable electrostatic saddle point. We explain this unexpected finding within a self-consistent Thomas-Fermi model, finding that localization of a zero-dimensional state at the saddle point is favored whenever the applied confinement potential is sufficiently soft compared to the Coulomb energy. Our results provide a direct demonstration of Coulomb-driven reconstruction at the boundary of a quantum Hall system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1974

Refinement of the Goloseyev catalog point coordinates in the limb zone and determination of point coordinates on the back side of the moon

Lunar photography from Zond 6 showed half the side of the moon which is not visible from the earth, and this made it possible to construct a photogrammetric grid encompassing the entire Western Hemisphere and referenced to points of the visible side, whose coordinates were taken from the Goloseyev catalog. The problem was solved using two pictures taken from approximately 9000 km above the lunar surface. The photogrammetric grid was constructed by joint statistical analysis of the measurements of both pictures and the selenographic coordinates of the catalog points. A special algorithm was developed and a program compiled realizing the maximum likelihood method which permitted working with up to 120 catalog points simultaneously.

Krasikov, V. A.↗
NASA NTRS1985

Analysis of a method for precisely relating a seafloor point to a distant point on land

A study of the environmental constraints and engineering aspects of the acoustic portion of a system for making geodetic ties between undersea reference points and others on land is described. Important areas in which to make such observations initially would be from the California mainland out to oceanic points seaward of the San Andreas fault, and across the Aleutian Trench. The overall approach would be to operate a GPS receiver in a relative positioning (interferometric) mode to provide the long range element of the baseline determination (10 to 1,000 km) and an array of precision sea floor acoustic transponders to link the locally moving sea surface GPS antenna location to a fixed sea floor point. Analyses of various environmental constrants (tides, waves, currents, sound velocity variations) lead to the conclusion that, if one uses a properly designed transponder having a remotely controllable precise retransmission time delay, and is careful with regard to methods for installing these on the sea floor, one should, in many ocean locations, be able to achieve sub-decimeter overall system accuracy. Achievements of cm accuracy or better will require additional understanding of time and space scales of variation of sound velocity structure in the ocean at relevant locations.

Spiess, F. N.↗
NASA NTRS1988

Simultaneous observations of 20 centimeter bright points and He I 10830 A dark points in the quiet sun

Simultaneous observations of the quiet sun at 20 cm radio and He I wavelengths are used to establish the relationship between coronal bright points, as inferred from the 20-cm radio emission, and He I dark points. It is shown that the 20-cm radio emission, which originates from the low corona-transition region, is always associated with regions of enhanced He I absorption; however, it does not always coincide with strong He I 10830 A absorption regions known as He I 'dark points'. Significant fluctuations in the intensity of 20-cm radio emission and He I absorption take place on time scales of minutes.

Habbal, Shadia R.↗
NASA NTRS1992

A chronology of the on-orbit pointing control system changes on the Hubble Space Telescope and associated pointing improvements

The pointing control system on the Hubble Space Telescope was designed to keep an image stable in the focal plane to 0.007 arc seconds (rms) for observations lasting from seconds to hours. Following the on-orbit deployment, this level of pointing performance was achieved only for short intervals during each orbit because of unexpected disturbances originating in the Solar Arrays. Since this problem was first recognized, several control system redesigns have been carried out and uplinked to the spacecraft with increasing degrees of success. This paper presents a chronology of those activities. In addition, sufficient background material is included regarding the pointing control system and the Solar Array disturbance so that the contents can be understood without reverting to the details in the reference material.

Sharkey, J. P.↗
NASA NTRS2003

Orbit Determination (OD) Error Analysis Results for the Triana Sun-Earth L1 Libration Point Mission and for the Fourier Kelvin Stellar Interferometer (FKSI) Sun-Earth L2 Libration Point Mission Concept

The Triana spacecraft was designed to be launched by the Space Shuttle. The nominal Triana mission orbit will be a Sun-Earth L1 libration point orbit. Using the NASA Goddard Space Flight Center's Orbit Determination Error Analysis System (ODEAS), orbit determination (OD) error analysis results are presented for all phases of the Triana mission from the first correction maneuver through approximately launch plus 6 months. Results are also presented for the science data collection phase of the Fourier Kelvin Stellar Interferometer Sun-Earth L2 libration point mission concept with momentum unloading thrust perturbations during the tracking arc. The Triana analysis includes extensive analysis of an initial short arc orbit determination solution and results using both Deep Space Network (DSN) and commercial Universal Space Network (USN) statistics. These results could be utilized in support of future Sun-Earth libration point missions.

Marr, Greg C.↗
NASA NTRS2007

Guaranteeing Pointing Performance of the SDO Sun-Pointing Controllers in Light of Nonlinear Effects

The Solar Dynamics Observatory (SDO) mission is the first Space Weather Research Network mission, part of NASA s Living With a Star program.1 This program seeks to understand the changing Sun and its effects on the Solar System, life, and society. To this end, the SDO spacecraft will carry three Sun-observing instruments to geosynchronous orbit: Helioseismic and Magnetic Imager (HMI), led by Stanford University; Atmospheric Imaging Assembly (AIA), led by Lockheed Martin Space and Astrophysics Laboratory; and Extreme Ultraviolet Variability Experiment (EVE), led by the University of Colorado. Links describing the instruments in detail may be found through the SDO web site.2 The basic mission goals are to observe the Sun for a very high percentage of the 5-year mission (10-year goal) with long stretches of uninterrupted observations and with constant, high-data-rate transmission to a dedicated ground station. These goals guided the design of the spacecraft bus that will carry and service the three-instrument payload. At the time of this publication, the SDO spacecraft bus is well into the integration and testing phase at the NASA Goddard Space Flight Center (GSFC). A three-axis stabilized attitude control system (ACS) is needed both to point at the Sun accurately and to keep the roll about the Sun vector correctly positioned. The ACS has four reaction wheel modes and 2 thruster actuated modes. More details about the ACS in general and the control modes in particular can be found in Refs. [3-6]. All four of SDO s wheel-actuated control modes involve Sun-pointing controllers, as might be expected from such a mission. Science mode, during which most science data is collected, uses specialized guide telescopes to point accurately at the Sun. Inertial mode has two sub-modes, one tracks a Sun-referenced target orientation, and another maintains an absolute (star-referenced) target orientation, that both employ a Kalman filter to process data from a digital Sun sensor and two star trackers. However, this paper is concerned only with the other two modes: Safe Hold (SH) and Sun Acquisition (SA).

Starin, Scott R.↗
DOE OSTI2024

7-8 GHz Point-to-Point Testing

Wireless spectrum is a limiting resource for continued economic growth in the United States. As discussed in the recent National Spectrum Strategy (NSS), wireless spectrum underpins several aspects of the U.S. economy and the demand for additional spectrum is driving the need for realizing spectrum sharing to enable continued development. At the same time, wireless spectrum is an essential foundation of critical energy infrastructure, including electric, oil, and natural gas resources. In particular, wireless point-to-point (P2P) links are the backbone of vast infrastructure networks that enable the flow of sensor and control information needed to manage critical energy sector infrastructure in the United States. These links will only become more important as the energy sector incorporates more diverse sensing and more efficient control mechanisms, which increases system complexity and data volume requiring more resilient communications. Therefore, the continued economic development of the U.S. depends on determining novel approaches to spectrum management that balance both broad access for advanced wireless technologies and resilience for critical infrastructure.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1963

LUNAR POINT-TO-POINT COMMUNICATION

Ground wave propagation over an atmosphereless, lunar surface model is studied, with reference to point-to-point communication systems on the moon

POINT-TO-POINT COMMUNICATION↗
DOE OSTI2025

Using Temporal Information from Human Mobility Data to Detect Anchor Points

Spatiotemporal mobility data are available in massive quantities, but large quantities of data typically include fewer variables or data fields. Often, the only available fields are User ID, Longitude, Latitude, Timestamp (ULLT). This raises an important question: how much can we infer about human mobility patterns using only these four fields? With ULLT data, we do not know individuals' socioeconomic status information or when they are visiting their anchor points (AP) or locations (such as homes, places of employment, or schools), and it is a modern challenge to use this data to infer these characteristics. When detecting anchor locations with limited input information, verification and validation (VV) are significant challenges. This paper addresses the problem of identifying individuals' anchor locations using only temporal information from spatiotemporal datasets with limited attributes. Our approach does not explicitly use latitude and longitude during analysis. Locationbased information is only employed in the preprocessing stage to identify periods of movement (trips) and stops (dwelling). Beyond this step, all analysis is based on temporal patterns. In theory, if stops and dwell times could be detected through alternative means, our method could function entirely without location-based input. We demonstrate this methodology on the 2017 National Household Travel Survey (NHTS) data, because it includes a carefully designed and collected time use survey with representative sampling and labeled ground truth. The high-quality survey data allows us to test the accuracy of our methods because NHTS contains intended place labels and agent/user characteristics. We have also applied our validated AP identification algorithm on very large-scale GPS based trajectory data for Patterns-of-Life (PoL) assessment and other applications, but due to space limit that could not be presented here.

McBride, Liz [ORNL] (ORCID:0000000286925869)↗
DOE OSTI2026

Multiple interaction points in ghost collisions

The Ghost Collider makes use of unique “ghost” bunches, which are electrically neutral combinations of electrons and positrons within the same RF bucket, eliminates the beam-beam effects typically present at the interaction point (IP) in conventional colliders. This allows for the novel possibility of placing multiple interaction regions in series, achieving additive luminosity without introducing significant disruption. However, to get higher luminosity, the beta functions at the IP reaches millimeter scale, which in turn adds significant chromatic contribution to the collider. Correcting these chromatic effects is essential to maintain beam stability and ensure high luminosity during collider operation. By carefully adjusting the phase advance between two IRs that are placed in series, it becomes possible to cancel chromaticity globally, enabling stable collider operation while preserving high luminosity. In this paper we discuss the design of such IR/IRs to be used in a ghost collider.

Accelerator Physics↗