SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
It is shown that correlation currents arising from the superposition of pairs of states on distinct sides of a potential barrier in metal-barrier-metal structures can result in inelastic tunneling through the emission of surface plasmons. Net gain of an externally excited plasmon field is possible.
Fukui et al. (1979) and Stegeman et al. (1982) have shown theoretically that surface plasmon polaritons can be guided over long distances by thin metal films bounded by identical dielectric media. In principle, the possibility arises for the propagation of highly localized fields. In order to obtain long propagation distances, most of the energy will have to be carried outside the metal. THis makess it necessary to operate near the mode cutoff condition. In the present investigation, it is shown that very small air gaps between the metal and dielectric surfaces will cause the mode to become radiative, and, therefore, no longer bounded to the metal film. Calculations show that gaps of dimension 100 A and less can cause severe problems in geometries relying on long range surface plasmon polaritons. High refractive index liquids placed in the gaps should alleviate these problems.
A new strategy for efficient solar-energy conversion is based on parallel processing with surface plasmons: guided electromagnetic waves supported on thin films of common metals like aluminum or silver. The approach is unique in identifying a broadband carrier with suitable range for energy transport and an inelastic tunneling process which can be used to extract more energy from the more energetic carriers without requiring different materials for each frequency band. The aim is to overcome the fundamental 56-percent loss associated with mismatch between the broad solar spectrum and the monoenergetic conduction electrons used to transport energy in conventional silicon solar cells. This paper presents a qualitative discussion of the unknowns and barrier problems, including ideas for coupling surface plasmons into the tunnels, a step which has been the weak link in the efficiency chain.
Surface plasmons on opposite sides of a thin metal film surrounded by identical dielectrics interact to form coupled surface plasmons (CSP's). Corrugation of the metal film permits interaction of the CSP's with the radiation field. This paper reports the observation of optical emission from CSP's excited by the near-field coupling of molecules adjacent to a corrugated thin metal film embedded in photoresist.
A detailed model of surface plasmon dispersion in the metal-oxide-metal tunnel diode is presented in order to clarify the spectral emission from this diode. The model predicts the location of the spectral peaks and the emission between the peaks by considering the effects of retardation on the surface plasmon. A nonradiative mode is found to play a major role in the transition from the visible to UV peaks in the diode spectra.
The Si/CoSi2/Si heterostructures prepared by codeposition and solid-phase epitaxy on Si(111) substrates were characterized using Auger plasmon data as a measure of Si overlayer thickness. The method of calibration is described, and the results of two studies, including a study of islanding in Si/CoSi2/Si and a study of diffusion in CoSi2/Si are presented, illustrating the utility of the Auger plasmon loss technique. It is shown that, most likely, the diffusion proceeds through residual defects in the CoSi2.
A surface plasmon device that operates in a transmissive mode. The light is coupled through optically transparent layers to a surface plasmon which alters the color of the light.
Biosensors of a proposed type would exploit scattering of light by surface plasmon resonance (SPR). Related prior biosensors exploit absorption of light by SPR. Relative to the prior SPR biosensors, the proposed SPR biosensors would offer greater sensitivity in some cases, enough sensitivity to detect bioparticles having dimensions as small as nanometers. A surface plasmon wave can be described as a light-induced collective oscillation in electron density at the interface between a metal and a dielectric. At SPR, most incident photons are either absorbed or scattered at the metal/dielectric interface and, consequently, reflected light is greatly attenuated. The resonance wavelength and angle of incidence depend upon the permittivities of the metal and dielectric. An SPR sensor of the type most widely used heretofore includes a gold film coated with a ligand a substance that binds analyte molecules. The gold film is thin enough to support evanescent-wave coupling through its thickness. The change in the effective index of refraction at the surface, and thus the change in the SPR response, increases with the number of bound analyte molecules. The device is illuminated at a fixed wavelength, and the intensity of light reflected from the gold surface opposite the ligand-coated surface is measured as a function of the angle of incidence. From these measurements, the angle of minimum reflection intensity is determined
We study the behavior of plasmon resonances of metal nanospheres embedded in an absorbing medium. First-principles far-field computations based on the general Lorenz–Mie theory show that increasing absorption in the host medium broadens and suppresses plasmon resonances in the extinction and effective scattering efficiency factors and suppresses resonance features in the phase function. These effects of absorption are analogous to those on the morphology-dependent resonances of dielectric particles with large size parameters.
Now a prototype of surface plasmon tunable filter has been fabricated at JPL, and the experiment measurement will be discussed in this paper.
Surface plasmon tunable filter is a new technology under development at the Jet Propulsion Laboratory. This technology can be used to build a tunable mirror.
Last year, I had reported a novel phenomenon of voltage-induced color-selective absorption with surface plasmons (Appl. Phys. Lett. 67, 2749)...A prototype ( of a tunable notch filter) has been built using liquid crystal as the EO material.
A novel projection display, based on a new phenomenon of voltage-induced color-selective absorption with surface plasmons, are able to generate bright image on a large screen with high efficiency. In addition, neither color filters or nor phosphors are needed to generate the color.
A novel projection display, based on a new phenomenon of voltage-induced color-selective absorption with surface plasmons, are able to generate bright image on a large screen with high efficiency. In addition, neither color filters nor phosphors are needed to generate the color. With the incident beam of ±7° half cone angle, the color purity of this device can be as good as the CRT displays, and the contrast ratio can reach over 200:1.
NASA is exploring the use of microwave spoof plasmon polaritons to detect defects in metallic structures. This work investigates the detection of simulated defects in the form of aluminum wires as small as 1.6 mm diameter and 2mm long that are placed in a grooved aluminum test article. The inclusions simulate manufacturing defects, and the sum of the delta impedance is shown to increase with increasing volume of added metal. A threshold value of 50Ω has been proposed for defect detection. In addition to detecting defects, the technique also estimates the volume of the defect.
NASA is exploring the use of microwave spoof plasmon polaritons to detect defects in metallic structures. This work investigates the detection of simulated defects in the form of aluminum wires as small as 1.6 mm diameter and 2 mm long that are placed in a grooved aluminum test article. The inclusions simulate manufacturing defects, and the sum of the delta impedance is shown to increase with increasing volume of added metal. Based on the results, a threshold value of 50Ω has been proposed for defect detection. In addition to detecting defects, the technique also estimates the volume of the defect.
NASA is exploring the use of microwave spoof plasmon polaritons to detect defects in integrally stiffened cylinders. This work investigates the detection of simulated defects in the form of aluminum wires as small as 10 mm long and 3.1 mm diameter that are placed in between stiffeners of an ISC. The wires simulate manufacturing inclusions defects, and the sum of the delta impedance is shown to increase with increasing volume of added metal.
LF surface plasmons in tunnel junctions coupling to AC Josephson current, discussing I-V characteristics