Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “physical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Deep Eutectic Solvents for Pretreatment of Lignocellulose Biomass: Physical Properties, Solubility Mechanisms, and Their Interactions

As the most accessible and abundant renewable resource on earth, lignocellulosic biomass mainly consists of cellulose, hemicelluloses, and lignin with a small amount of protein, pectin, minerals, and extractives (e.g., tannins, lipids, and resins). Lignocellulosic biomass has gained extensive attention in industry and research owing to its renewability, availability, and low cost. However, achieving efficient fractionation of lignocellulose components and all-component utilization in a green and cost-effective manner remains a challenge dueto biomass recalcitrance. Deep eutectic solvents (DESs) have received considerable attention because they are biocompatible, inexpensive, biodegradable, have low toxicity, and are easy to prepare and recycle; these characteristics strongly depend on individual components involved in DESs preparation. This review systematically summarizes recent progress in the fractionation of carbohydrates (cellulose and hemicelluloses) and lignin from biomass using DESs, with particular emphasis on the effects of DES types and pretreatment parameters on fractionation efficiency. The subsequent conversion and upgrading of the DES-fractionated products (i.e., carbohydrates and lignin) are comprehensively analyzed. Finally, the challenges and future prospects of lignocellulose biomass fractionation using DESs are proposed in view of the existing limitations. This review provides an in-depth understanding of lignocellulose biomass fractionation during DESs processing, offering insights to improve current pretreatment methods and/or to explore new pretreatment methods aimed at mitigating the global energy crisis.

Mqoni, Ntebogeng [North-West University (Mafikeng ↗
DOE OSTI2026

Dynamic Evolution of Mass and Physical Properties of Atmospheric Organic Aerosol under Solar Irradiance

Organic aerosol (OA) particles constitute a substantial fraction of sub-micron particulate mass in the atmosphere and play a critical role in climate system. OA undergoes dynamic aging processes in the atmosphere, with photolytic aging induced by ultraviolet solar irradiance being an important yet poorly characterized mechanism. Knowledge gaps persist regarding the role of volatility transformations during photolytic aging on the OA mass decay kinetics and the evolution of climate-relevant properties, such as hygroscopicity, hindering the model evaluation of OA spatiotemporal distributions and atmospheric budgets. In this study, we conduct isothermal photolytic aging experiments on both laboratory-generated secondary organic aerosols and ambient-collected particles from urban Atlanta, utilizing a high-sensitivity Quartz Crystal Microbalance. Our results reveal that photolytic aging reduces 40–66% of the low-volatility OA mass with lifetimes ranging from 8 to 200 hours under solar irradiance, and 44–92% of the photolytic mass loss is through slow evaporation of semi- or intermediate-volatile products, kinetically limited by their volatility. We observe up to ±50% changes in OA hygroscopicity with the transformation of fresh OA to photo-recalcitrant low-volatility products, associated with changes in oxygen-to-carbon ratio and molecular weight. A kinetic model incorporating photolytic volatility transformation provides a cohesive explanation for the observed photolysis-induced changes in mass, volatility, and hygroscopicity. Our results can help constrain model representation of the dynamic evolutions of mass and climate-relevant properties during photolytic aging processes of the ambient OA, improving our understanding of OA atmospheric behavior and climate impact.

Bai, Bin↗
DOE OSTI2026

Epitaxial growth and physical properties of Bi 2 Ru 2 O 7 thin films on YSZ(111) substrates

We systematically investigated the growth of Bi 2 Ru 2 O 7 thin films on a Y-stabilized ZrO 2 (111) substrate using pulsed laser deposition by mapping the influence of growth temperature and oxygen partial pressure on phase stability, lattice parameters, and cation ratio. The results show that the epitaxial stabilization requires a minimum growth temperature, which is rather insensitive to the pressure. Meanwhile, the Bi:Ru ratio decreases when increasing growth temperature or decreasing pressure. By constructing the temperature–pressure phase diagram, an optimal growth window within the epitaxial phase was established. On the other hand, the electrical resistivity remains at a similar level within the epitaxial phase with only subtle changes to the temperature dependence, indicative of the robustness of the conductivity against composition variation. Our study provides a foundation for future investigations on thin films and heterostructures that utilize Bi 2 Ru 2 O 7 .

Crystallography↗
DOE OSTI2026

Physical properties investigation of tetragonal Ba T 2 P 2 (T = Ru, Pd)

The structural, thermal, electrical transport, and magnetic properties of ternary compounds BaT 2 P 2 (T = Ru, Pd) are reported together with electronic structure calculations. Our results show that BaRu 2 P 2 crystallises in the layered tetragonal ThCr 2 Si 2 -type structure (space group I4/mmm) whereas BaPd 2 P 2 adopts the primitive tetragonal CeMg 2 Si 2 -type structure (space group P4/mmm). The combined experimental results and electronic structure calculations suggest metallic and diamagnetic ground states for both materials. Electrical transport measurements further indicate non-Fermi liquid behaviour at low temperatures. Notably, BaRu 2 P 2 exhibits an anomalous feature in the magnetic susceptibility at T ~ 260 K, similar to that observed in BaRu 2 As 2 . A comparison between the bare density of states obtained from electronic structure calculations and the experimentally estimated values suggests the presence of strong correlation effects in the material. Furthermore, the heat capacity of BaPd 2 P 2 , calculated using the full phonon dispersion relation, is in good agreement with the experimental data, particularly at low temperatures, highlighting the significant contribution of optical phonon branches to C P in this temperature range.

flat bands↗
DOE OSTI2025

Strength, deformation, and the fcc–hcp phase transition in condensed Kr and Xe to the 100 GPa pressure range

The rare gas solids exhibit systematic differences in crystal structure, phase transition conditions, bond strength, and other physical properties. The physical properties of heavy rare gas solids krypton and xenon are modified by the martensitic phase transition from face-centered cubic to hexagonal close packed structure over a broad pressure range. Crystal structure, strength, and plastic deformation of krypton and xenon have been investigated at 300 K using compression in the diamond-anvil cell with synchrotron angle-dispersive x-ray diffraction and complementary ruby fluorescence spectroscopy for Xe. Stacking faults indicative of the fcc–hcp phase transition are observed at pressures at and above 1.23 ± 0.05 and 1.9 ± 0.6 GPa in Kr and Xe, respectively. The transition remains incomplete in both solids to pressures greater than 100 GPa. Strength determined from stress measurements in Pt and ruby standards at pressures up to 111 GPa and complemented by observations of strain and texture measurements obtained by x-ray diffraction in the radial geometry to 100 GPa indicates similar or higher strength than Ar at all conditions, with significant stiffening at 15–20 GPa. Radial diffraction data reveal the persistence of broad highly textured fcc diffraction lines to 101 GPa in Xe, suggesting that the axial measurements may underestimate the metastable persistence of the fcc phase due to biased sampling of hcp crystallites resulting from preferred crystallite orientation. Kr and Xe are compared with He, Ne, and Ar for a systematic understanding of physical properties and phase equilibria of rare gas solids.

Compressive stress↗
DOE OSTI2025

Bacterial-Retted Hemp Fiber/PLA Composites

The push for sustainability in all facets of manufacturing has led to an increased interest in biomass as an alternative to non-renewable materials. Hemp bast fiber mats were produced from a bacterial retting process, named BFM, as the fiber reinforcement. The objective of this study was to evaluate the feasibility of laminating BFM with polylactic acid (PLA) for a composite panel product. Since both BFM and PLA are biodegradable, the resulting BFM-PLA composites will be 100% biodegradable. PLA pallets were processed into thin polymer sheets which served as the matrix. The BFM and PLA plates were laminated in five layers and compression-molded into composite panels. Experiments were conducted on the three BFM-to-PLA ratios (35/65, 45/55, and 50/50). Mechanical properties (tensile and bending properties) and physical properties (thickness swell and water absorption) were tested and compared to the currently commercial sheet molding compound (SMC) from fiber glass. The thermal behavior of the BFM/PLA composites was characterized using dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC). The developed BFM/PLA composite product is a sustainable alternative to existing synthetical fiber-reinforced polymer (FRP) that is biodegradable in landfill at the end of life.

Smith, Lee M. (ORCID:0000000264390357)↗
DOE OSTI2025

Hydrothermal Growth of Magnetically Frustrated Crystals: Lanthanide Stannate Pyrochlores as a Prototype

One important test bed system for frustrated magnetism is the pyrochlore lattice with the formula A2B2O7 in the cubic space group Fd3(-)m. Both the A and B sites occupy crystallographic trigonal sites and both sites possess a tetrahedral relationship with the other similar metal ion sites. These symmetry relationships generate a 3 D frustrated structure. In frustrated magnetic systems, typically a trivalent lanthanide ion occupies the A site and a magnetically silent tetravalent ion (Ti, Zr, Sn, etc.) occupies the B site. A classical problem related to the crystal growth of these compounds is sample quality. As refractory oxides, the traditional synthesis and crystal growth techniques require high temperatures, which creates two problems that are quite common and endemic to the pyrochlores. One is oxide lattice defects and the other is A/B site disorder. Both issues often occur in the same crystals at the same time and can have a significant impact on the study of physical properties. A hydrothermal approach can be applied to this problem. The relatively low crystal growth temperatures (600-720˚C) greatly minimize nonstoichiometry, lattice defects and A/B site disorder. The reduction of these pervasive imperfections significantly increases the quality of the observed physical property data. This talk will focus on the lanthanide stannates Ln2Sn2O7 as a prototype test bed of these systems. The stannates are among the few building blocks that can stabilize the pyrochlore structure type for all the lanthanides and they serve as an excellent proving ground for a wide range of physical properties. The synthesis and crystal growth of the lanthanide stannates will be reviewed, along with a discussion of some of the physical properties that result from the frustrated magnetic states of these low defect crystals.

Hydrothermal, crystal growth↗
DOE OSTI2024

Simultaneous Development of Antiferromagnetism and Local Symmetry Breaking in a Kagome Magnet (Co 0.45 Fe 0.55 )Sn

CoSn and FeSn, two kagome-lattice metals, have recently attracted significant attention as hosts of electronic flat bands and emergent physical properties. However, current understandings of their physical properties are limited to knowledge of the average crystal structure. Here, we report the Fe-doping induced coemergence of the antiferromagentic (AFM) order and local symmetry breaking in (Co 0.45 Fe 0.55 )Sn. Rietveld analysis on the neutron and synchrotron X-ray diffraction data indicates A-type antiferromagnetic order with the moment pointing perpendicular to the kagome layers, associated with the anomaly in the MSn(1) 2 Sn(2) 4 (M = Co/Fe) octahedral distortion and the lattice constant c. Reverse Monte Carlo (RMC) modeling of the synchrotron X-ray total scattering results captured the subtle local orthorhombic distortion involving off-axis displacements of Sn(2). Our results indicate that the stable hexagonal lattice above T N becomes unstable once the A-type AFM order is formed below T N . Here we argue that the local symmetry breaking has a magnetic origin, since the spatially varied M–Sn(2) bond lengths arise from out-of-plane magnetic exchange coupling J c via the exchange pathway M–Sn(2)–M. Our study provides comprehensive information on the crystal structure in both long-range scale and local scale, unveiling unique coupling between AFM order, octahedral distortion, and hidden local symmetry breaking.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Comparative analysis of new crystal and plastic scintillators for fast and thermal neutron detection

This paper considers scintillation and physical properties of efficient organic scintillators tested as single crystals and as components of plastics with pulse shape discrimination (PSD). For the first time, single crystals of 9,9-dimethyl-2-phenyl-9H-fluorene (PhF) were grown for studies of the basic scintillation properties of this new compound. Comparison to classical organic crystals, like anthracene, trans-stilbene, and p-terphenyl, and to more recently introduced organic glass showed that the new crystal belongs to a group of the most efficient scintillators, with light output exceeding that of trans-stilbene and PSD comparable to that of p-terphenyl. Furthermore, additional studies were conducted to evaluate scintillation performance and physical properties, like hardness and dye leaching, of plastic scintillators prepared with PhF, organic glass, and liquid diisopropylnaphthalene (DIPN) that were considered as examples for potential replacement of PPO (2,5-diphenyloxazole) in current commercial PSD plastic scintillators. Comparison of the highest performing plastic scintillators prepared with these dyes shows that PhF formulations produced a record light output (LO) increase of 69 % relative to EJ-200. Similar improvements obtained with 6 Li-loaded formulations showed that future development of PSD plastics should not be limited to use of PPO but must involve the search and exploration of new efficient dyes that may lead to discovery of much brighter organic scintillators with improved physical properties required for fast and thermal neutron detection, fast neutron spectroscopy, and antineutrino detection applications.

9,9-dimethyl-2-phenyl-9H-fluorene↗
DOE OSTI2024

Epitaxial Thin Film Growth on Recycled SrTiO 3 Substrates Toward Sustainable Processing of Complex Oxides

Complex oxide thin films cover a range of physical properties and multifunctionalities that are critical for logic, memory, and optical devices. Typically, the high‐quality epitaxial growth of these complex oxide thin films requires single crystalline oxide substrates such as SrTiO 3 (STO), MgO, LaAlO 3 , a‐Al 2 O 3, and many others. Recent successes in transferring these complex oxides as free‐standing films not only offer great opportunities in integrating complex oxides on other devices, but also present enormous opportunities in recycling the deposited substrates after transfer for cost‐effective and sustainable processing of complex oxide thin films. In this work, the surface modification effects introduced on the recycled STO are investigated, and their impacts on the microstructure and properties of subsequently grown epitaxial oxide thin films are assessed and compared with those grown on the pristine substrates. Detailed analyses using high‐resolution scanning transmission electron microscopy and geometric phase analysis demonstrate distinct strain states on the surfaces of the recycled STO versus the pristine substrates, suggesting a pre‐strain state in the recycled STO substrates due to the previous deposition layer. These findings offer opportunities in growing highly mismatched oxide films on the recycled STO substrates with enhanced physical properties. Specifically, yttrium iron garnet (Y 3 Fe 5 O 12 ) films grown on recycled STO present different ferromagnetic responses compared to that on the pristine substrates, underscoring the effects of surface modification. The study demonstrates the feasibility of reuse and redeposition using recycled substrates. Via careful handling and preparation, high‐quality epitaxial thin films can be grown on recycled substrates with comparable or even better structural and physical properties toward sustainable process of complex oxide devices.

pre-strained STO surfaces↗
DOE OSTI2024

Explicit simulation of the Brownian rotation of arbitrary shaped aerosol particles using quaternions

The shape of an aerosol particle strongly influences its mass and momentum transfer cross-sections, charging properties, and other physical properties. Here, we present an explicit time-stepping procedure to simulate the rotational Brownian motion of arbitrary shaped aerosol particles by solving Euler’s equation of rotation. A Langevin formulation of the rotation equations is used, wherein Brownian motion due to thermal collisions between a particle and background gas molecules is represented using a stochastic fluctuating torque and fluid resistance is included as a drag torque. To avoid singularities associated with describing the orientation of a shape with Euler angles, we employ a quaternion formulation that leads to first-order stochastic differential equations to describe the evolution of the angular position and angular velocity of a rigid body. We perform all the rotational dynamics calculations in the body-fixed frame of reference attached to the rotating shape whose basis vectors are the normalized eigenvectors of the inertia tensor of the particle. Numerical solutions to rotation under torque-free conditions, damped rotation without Brownian motion, and stochastic rotation for arbitrary shapes are presented and discussed. The presented method enables time-resolved simulation of Brownian rotation for direct comparison with experimentally measured trajectories or statistical measures. The second order accuracy of the used time-stepping procedure places a severe restriction on the timestep that can be used for obtaining accurate results. Animations of presented simulations are included for visualizing rotational motion at various gas pressures. To aid implementation, MATLAB ® codes are also provided. Extension to include translation Brownian motion is straightforward.

Roy, Mrittika↗
DOE OSTI2025

Is a Homologous Series Member Equal to or Greater than the Sum of its Subunits? A Focus on a Few Fe-based BaNiSn3 subunits: LnFeGe3 (Ln = La, Pr)

The homologous series Lnn+1MnGe3n+1 (Ln = Ce, Pr, M = Fe, Co) has proven to be a fruitful platform for tuning physical properties as a function of subunit stacking. In this study, we investigate the crystal growth, structure, and physical properties of PrFeGe3, aiming to deconstruct Pr4Fe3Ge10 (n = 3) into its subunits, including the BaNiSn3 and CeNiSi2 structure types. The electrical resistivity and magnetic susceptibility of PrFeGe3 were measured. The magnetic properties reveal PrFeGe3 to be antiferromagnetic (5 K) with an effective moment of eff = 4.38 B/F.U., larger than the spin-only moment from Pr3+ (3.58 B). Due to the large magnetic moment observed, the oxidation state of the elements was determined using spectroscopic methods including X-ray absorption spectroscopy and X-ray photoelectron spectroscopy. The neutral oxidation state of iron determined from X-ray photoelectron spectroscopy supports itinerant magnetic behavior of iron. Annealing, in tandem with differential scanning calorimetry, revealed PrFeGe3 to be a precursor for the formation of new homologous series members.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A brief review on strain engineering of ferroelectric K x Na 1- x NbO 3 epitaxial thin films: Insights from phase-field simulations

Strains play a pivotal role in determining the phase equilibrium, domain configuration, and functional properties of the low-dimensional ferroelectrics. There is growing interest in the strain engineering of ferroelectric K x Na 1- x NbO 3 (KNN) epitaxial thin films, which exhibit excellent physical properties and promise as eco-friendly alternatives to lead-based ferroelectrics for microdevice applications. Further, advances have been made in understanding the phase equilibria and transitions, domains and domain walls, and their relations to the physical properties of KNN epitaxial thin films using a combination of experiments and theoretical modeling, particularly phase-field simulations. Here, we review recent progress in these aspects and showcase the phase-field method for establishing strain phase diagrams, elucidating the domain and domain wall structures at equilibrium, and predicting the structure–property relationships in ferroelectric KNN thin films. We also discuss challenges and opportunities to further advance our understanding of KNN thin films and potentially unlock new functionalities by leveraging phase-field simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Fuel Property Effects on Stochastic Preignition Events During Engine Load Transitions

Stochastic preignition (SPI) is an abnormal combustion phenomenon that can cause catastrophic engine damage. There have been several proposed mechanisms of SPI, where a uniform source is still not certain, however, SPI tendencies have been shown to be influenced by engine operating conditions, oil composition, engine age, and fuel chemical and physical properties. Laboratory research and testing for SPI propensity is challenging given the stochastic nature of events, as well as the potential for significant degradation of the engine platform and measuring equipment over time. Thus, SPI specific experiments are generally conducted under either sustained or cyclic patterning of steady-state operating conditions to avoid the influence of transient engine boundary conditions on test parameters of interest (e.g. oil additive package, fuel properties, engine speed/load, etc.). In this work a cyclically varying SPI test sequence involves a 5 min engine warmup period at a low engine load of around 4 bar gross indicated mean effective pressure (IMEPg), followed by a transition to high load (~20 bar IMEPg) at a constant 2000 rev/min engine speed for a total of 25 min. This individual test sequence load schedule is then sequentially repeated 10 times to generate significant statistical data for analysis. This work examines the influence of fuel chemical and physical properties on SPI tendency during the unsteady portion of the 10-cycle sequence (the first 5 min of the high load operation in each sequence of the loading cycle) which has been discarded from previous analyses due to the uncertainty in engine operating and thermal boundary conditions. Results from this analysis suggest an increasing trend in the ratio of SPI events during the unsteady test period relative to the steady test period with increasing fuel Reid Vapor Pressure (RVP), implying differences in uncontrolled ignition source terms, possibly from, fuel wall interactions and retention during the load transition phase of the test.

Splitter, Derek [ORNL] (ORCID:0000000174044047)↗
DOE OSTI2024

Strain Programming of Oxygen Octahedral Symmetry in Perovskite Oxide Thin Films

The collective rotations of oxygen octahedra play an important role in determining the physical properties of functional perovskite oxides. The epitaxial strain can serve as an effective means to modify the oxygen octahedral symmetry (OOS), i.e., oxygen octahedral rotation or tilt (OOR/OOT). However, the strain-OOS coupling that may alter the details of the OOS, thereby the physical properties, has not been fully understood. In this work, it is demonstrated that epitaxial strain can not only induce a structural phase transition but also precisely tune the degree of OOR. The correlated metal CaNbO 3 , which is orthorhombic, is studied by growing as epitaxial thin films. By imposing epitaxial strain, it is found that the film undergoes a structural phase transition from orthorhombic to tetragonal upon fully straining (i.e., from a + b − b − to a 0 a 0 c − ). In unstrained films, the octahedral rotation along the c-axis is as large as 15.7° that can be tuned to 6.6° by strain. This finding offers a general approach to manipulating OOR/OOT via strain engineering in complex oxide heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The Radiation-Induced Fate of Fission Product Iodine in Molten Salts

Understand and Predict Radiation-Induced Iodine Speciation, Chemistry, and Transport in High-Temperature Molten Salts Award Number: DE-AC07-05ID1451 Gregory P. Holmbeck (Gregory.Holmbeck@inl.gov), Center for Radiation Chemistry Research, Idaho National Laboratory, 1955 N. Fremont Avenue Idaho Falls, ID, 83415, USA. Project Scope The goal of this Chemical and Materials Sciences to Advance Clean Energy Technologies and Low-Carbon Manufacturing project is to understand and predict the radiation-induced speciation, chemistry, and transport of fission product iodine in the triumvirate extremes of high-temperature, ionizing radiation, and corrosive molten salts. This missing fundamental information is critical for the accelerated development and deployment of safe, clean nuclear energy based on molten salt reactor (MSR) and pyrochemical reprocessing technologies. The central hypothesis driving this research is, the radiation-induced conversion of iodide will yield an extensive suite of transient and steady-state iodine radiolysis products that will alter the bulk chemical and physical properties of the irradiated molten salt system—the speciation, distribution, and chemical transport of which will be dictated by the composition and the availability of multivalent metal cations and metal alloy interfaces. To test this hypothesis, this project initiated three synergistic Research Objectives: (1) determine how the inclusion of iodine/iodide influences the chemical and physical properties of complex molten salt mixtures; (2) elucidate the speciation and fundamental chemical behavior of transient and steady-state iodine/iodide species formed by the irradiation of molten and solid salt mixtures; and (3) understand the influence of interfacial processes on determining the final disposition of iodine in high temperature molten salts, notably the structure and chemical speciation of iodine at metal-salt interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Upward band gap bowing and negative mixing enthalpy in multi-component cubic halide perovskite alloys

Physical properties intermediate between constituents of alloys can be achieved as downward convex positive bowing, upward concave negative bowing, or zero bowing. Such bowing effects are essential for band gap engineering in semiconductor alloys. Upward band gap bowing effects are rather rare, hindering the exploration on half of the available physical property space of alloys. Part of this being a rare event is related to the need to stabilize an alloy with low mixing enthalpy, so it does not phase separate. Here, in this paper, we find via density functional theory that one can satisfy the simultaneous conditions of negative mixing enthalpy and upward band gap bowing in four-component AB⁢X 3 halide perovskite alloys in the cubic perovskite structure. Such perovskite alloys have the B-site occupied by a mixture of group IVB and IIB elements that have the IVB-𝑠 and IIB-s states in the valence bands and conduction bands, respectively, leaving the delocalized 𝑠 states to strongly repel each other. This 𝑠−𝑠 repulsion leads to the upward band gap bowing and negative mixing enthalpies simultaneously. Remarkably, we identify a perovskite alloy that has a band gap much larger than all its components. Analogous trends of upward band gap bowing and negative mixing enthalpy also appear in the corresponding three-component and two-component AB⁢X 3 halide perovskite alloys. These observations of upward band gap bowing and negative mixing enthalpy will significantly accelerate the design of stable upward band gap bowing alloys in a broad range of material families.

14 SOLAR ENERGY↗