Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “particle picking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Kinetic Simulations of Radiative Magnetic Reconnection in the Coronae of Accreting Black Holes

We perform 2D and 3D particle-in-cell simulations of reconnection in magnetically dominated e ± plasmas subject to strong Compton cooling. Magnetic reconnection under such conditions can operate in accretion disk coronae around black holes, which produce hard X-rays through Comptonization. Our simulations show that most of the plasma in the reconnection layer is kept cold by Compton losses and locked in magnetically dominated plasmoids with a small thermal pressure. Compton drag clears cavities inside plasmoids and also affects their bulk motions. These effects, however, weakly change the reconnection rate and the plasmoid size distribution from those in nonradiative reconnection. This demonstrates that the reconnection dynamics is governed by similar magnetic stresses in both cases and weakly affected by thermal pressure. We examine the energy distribution of particles energized by radiative reconnection and observe two distinct components: (1) A mildly relativistic peak, which results from bulk motions of cooled plasmoids. This component receives most of the dissipated reconnection power and dominates the output X-ray emission. The peak has a quasi-Maxwellian shape with an effective temperature of ~100 keV. Thus, it mimics thermal Comptonization used previously to fit hard-state spectra of accreting black holes. (2) A high-energy tail, which receives ~20% of the dissipated reconnection power. It is populated by particles accelerated impulsively at X-points or "picked up" by fast outflows from X-points. The high-energy particles immediately cool, and their inverse Compton emission explains the MeV spectral tail detected in the hard state of Cyg X-1. Our first-principle simulations support magnetic reconnection as a mechanism powering hard X-ray emission from magnetically dominated regions of accreting black holes.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1995

A review of solar wind ion and electron plasma distribution functions: Present understanding and Ulysses results

Our present understanding of the distribution functions of the solar wind ion and electron thermal/suprathermal populations will be reviewed covering selected theoretical and observational topics. Roughly half the review will be devoted to recent discoveries (since Solar Wind 7). Among recent results are those of the Ulysses mission. The SWICS experiment observed pick-up protons and alpha particles, and acceleration of these particles at interplanetary shocks. Positive ion phenomena observed by SWOOPS include enhanced proton-alpha particle differential streaming both: (1) at high latitudes; and (2) in the ecliptic beyond 1 AU in the vicinity of shocks. The SWOOPS positive ion observations also demonstrate relative constancy of the entropy per proton at high latitudes beyond about 2.5 AU. Double beaming in both protons and alphas is observed by SWOOPS on either side of the current sheet, but not within; a possible explanation is reconnection at the edge of the current sheet. SWOOPS observed bi-directional streaming of electrons beyond 2 AU not only within Coronal Mass Ejections, but also upstream of corotating interplanetary shocks. Latitudinal and radial gradients of Ulysses electron core and halo temperatures will be discussed, as will work in progress on the three dimensional (in velocity space) properties of ion distributions.

Goldstein, B. E.↗
DOE OSTI2022

Probing criticality with deep learning in relativistic heavy-ion collisions

Systems with different interactions could develop the same critical behavior due to the underlying symmetry and universality. Using this principle of universality, we can embed critical correlations modeled on the 3D Ising model into the simulated data of heavy-ion collisions, hiding weak signals of a few inter-particle correlations within a large particle cloud. Employing a point cloud network with dynamical edge convolution, we are able to identify events with critical fluctuations through supervised learning, and pick out a large fraction of signal particles used for decision-making in each single event.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2004

Determining Sizes of Particles in a Flow from DPIV Data

A proposed method of measuring the size of particles entrained in a flow of a liquid or gas would involve utilization of data from digital particle-image velocimetry (DPIV) of the flow. That is to say, with proper design and operation of a DPIV system, the DPIV data could be processed according to the proposed method to obtain particle sizes in addition to particle velocities. As an additional benefit, one could then compute the mass flux of the entrained particles from the particle sizes and velocities. As in DPIV as practiced heretofore, a pulsed laser beam would be formed into a thin sheet to illuminate a plane of interest in a flow field and the illuminated plane would be observed by means of a charge-coupled device (CCD) camera aimed along a line perpendicular to the illuminated plane. Unlike in DPIV as practiced heretofore, care would be taken to polarize the laser beam so that its electric field would lie in the illuminated plane, for the reason explained in the next paragraph. The proposed method applies, more specifically, to transparent or semitransparent spherical particles that have an index of refraction different from that of the fluid in which they are entrained. The method is based on the established Mie theory, which describes the scattering of light by diffraction, refraction, and specular reflection of light by such particles. In the case of a particle illuminated by polarized light and observed in the arrangement described in the preceding paragraph, the Mie theory shows that the image of the particle on the focal plane of the CCD camera includes two glare spots: one attributable to light reflected toward the camera and one attributable to light refracted toward the camera. The distance between the glare spots is a known function of the size of the particle, the indices of refraction of the particle material, and design parameters of the camera optics. Hence, the size of a particle can be determined from the distance between the glare spots. The proposed method would be implemented in an algorithm that would automatically identify, and measure the distance between, the glare spots for each particle for which a suitable image has been captured in a DPIV image frame. The algorithm (see figure) would begin with thresholding of data from the entire image frame to reduce noise, thereby facilitating discrimination of particle images from the background and aiding in the separation of overlapping particles. It is important not to pick a threshold level so high that the light intensity between a given pair of glare spots does not fall below the threshold value, leaving the glare spots disconnected. The image would then be scanned in a sequence of rows and columns of pixels to identify groups of adjacent pixels that contain nonzero brightnesses and that are surrounded by pixels of zero brightness. Each such group would be assumed to constitute the image of one particle. Each such group would be further analyzed to determine whether the image was saturated; saturated particle images must be rejected because the locations of glare spots in saturated images cannot accurately be determined. Within each unsaturated particle image, the centroids (deemed to be the locations) of the glare spots would be determined by means of gradients of brightness distributions and three-point horizontal and three-point vertical Gaussian estimates based on the brightness values of the brightest pixels and the pixels adjacent to them. If the brightness of a given particle image contained only one peak, then it would be assumed that a second glare spot did not exist and that image would be rejected.

Wernet, M. P.↗
NASA NTRS1991

Comparison of magnetosonic wave and water group ion energy densities at Comet Giacobini-Zinner

Measurements of the Comet Giacobini-Zinner (GZ) are presented to determine to what extent wave-particle scattering redistributed the initial pick-up energy of the ion population. Also examined is the difference between the ion thermal energy and the energy in the magnetic fields of the waves. In spite of uncertainty of about a factor of 2 noted in the pick-up and mass-loaded regions, it is shown that less than approximately 50 percent of the pick-up energy is converted into wave magnetic energy in the inbound pick-up region.

Staines, K.↗
NASA NTRS2007

STS-114 Micrometeoroid/Orbital Debris (MMOD) Post-Flight Assessment

NASA Johnson Space Center (JSC) personnel assisted Kennedy Space Center (KSC) inspection teams in the identification of 41 micrometeoroid/orbital debris (MMOD) impact sites on the OV-103 vehicle (Discovery) during STS-114 postflight inspections. There were 14 MMOD impacts reported on the crew module windows (Figure 1). The largest impact feature, a 6.6 mm x 5.8 mm crater on window #4, was caused by a particle with an estimated diameter of 0.22 mm (Figure 2). This impact was among the largest ever recorded on a crew module window. The window was removed and replaced. Scanning Electron Microscope/Energy Dispersive X-ray (SEM/EDX) analysis of dental mold samples from the impact site to determine particle origin was inconclusive, possibly due to contamination picked up on the ferry flight from Edwards Air Force Base to KSC. The radiators on the inside of the payload bay doors sustained 19 impacts (Figure 3) with one of the impacts causing a face sheet perforation. The 0.61 mm diameter hole was produced by a particle with an estimated diameter of 0.4 mm, which approaches the 0.5-mm critical particle diameter of the wing leading edge reinforced carbon-carbon (RCC) panel high-temperature regions (Zone 3, Figure 4) that was established during Return to Flight testing of the RCC panels. An inspection of the payload bay door exterior insulation (FRSI) revealed a 5.8 mm x 4.5 mm defect that was caused by an MMOD particle with unknown composition, as the sample obtained was contaminated. Figure 5 provides a summary of the exterior surface survey that was conducted following the STS-114 mission. Two windows were removed and replaced due to hypervelocity impact. Nineteen impacts were recorded on the payload bay door radiators, with one face sheet penetration. Three impact sites were identified on the FRSI. There were four hypervelocity impact sites detected on the wing leading edge RCC panels. One impact was detected on the top cover of the TPS sample box (TSB) payload that was mounted on a carrier in the aft portion of the payload bay.

Hyde, J.↗
NASA NTRS1987

Origin of lead from green glass of Apollo 15426 - A search for primitive lunar lead

Green glass from Apollo 15 lunar clod 15426 (collected from the north rim of Spur Crater), known to be the most primitive among sampled lunar volcanic rocks, was analyzed for Pb isotopic compositions and concentrations of U, Th, and Pb. Hand-picked green glass and yellow impact glass particles were washed with water and a mixture of HBr and HF, and the washes and residues, spiked with a mixure of U-233-U-236-Th-230-Pb-205, were subjected to U-Th-Pb analyses. In contrast to the case of the Apollo 17 orange glass, the isotopic composition of lead from the surfaces of the green glass spherules is totally different from that of the spherules' interiors but is similar to the composition of lunar surface lead. Data for the interior lead yield a Pb-207/Pb-206 age of 3.41 Ga. The data indicate that lunar Pb evolved in an environment with U-238/Pb-204 ratios of 19 to 55, which is considerably lower than those for mare basalts (about 300) but higher than the earth values (6-8).

Tatsumoto, Mitsunobu↗
NASA NTRS1975

On the oxygen and nitrogen enhancements observed in low energy cosmic rays

Fisk et al. (1974) have suggested that neutral particles are ionized in the solar cavity, are subsequently picked up by the solar wind, obtaining energies of about 1 keV/nucleon, and may be further accelerated to about 10 MeV/nucleon in the interplanetary medium. The requirements for this acceleration are examined, and a possible acceleration model is outlined. The acceleration must be performed in a time less than the dwell time of the interstellar ions in the solar cavity and must compete successfully against adiabatic cooling. The energy required for the acceleration must be less than the energy available in variations in the solar wind flow. The accelerator must act inefficiently on solar wind electrons and protons, and perhaps upon the majority of interstellar ions. It is shown that these requirements can be satisfied by a model in which acceleration results from transit-time damping of long-wavelength magnetosonic turbulence.

Fisk, L. A.↗
DOE OSTI2025

Robotic Assembly of SRF Cavity Pair

Superconducting Radio Frequency (SRF) cavities for particle accelerators require tight tolerances, ultrahigh vacuum, and strict cleanliness during assembly. As in the semiconductor industry, defects such as particles and residues are deleterious to performance, possibly rendering a cavity unfit for use. This problem is addressed primarily through cleanroom assembly during sensitive steps and rigorous chemical processing to prevent and remove such defects. Human workers are often the largest source of contamination, even with proper gowning and practices. The semiconductor industry has long integrated robots in cleanroom operation, but this has not occurred for SRF cavity production; SRF cavities, unlike wafers, are complex shapes, require more hands-on mechanical assembly, and are low-volume production items. At Jefferson Laboratory, a co-operative robot (cobot) has been setup to overcome these problems. Cobots are safe for use alongside human workers and can integrate new tools such as a 3D camera part detection and gripper for item manipulation. Therefore, cobots represent a promising avenue for reducing particulate generated during a variety of assembly tasks. A mockup of a cavity pair and coupler was setup and the cobot programmed to automatically pick up the coupler and place on the mating cavity flange. Particle counting methods were setup to measure human vs cobot assembly particulate generation inside a cavity mockup. Other potential uses will be discussed for further improving SRF cavity assembly steps, where a cobot can replace or assist a human operator, and what potential gains are expected.

Duzik, Adam [Thomas Jefferson National Accelerator↗
NASA NTRS2004

Analysis of Droplet Size during the Ice Accumulation Phase Of Flight Testing

There are numerous hazards associated with air travel. One of the most serious dangers to the pilot and passengers safety is the result of flying into conditions which are conducive to the formation of ice on the surface of an aircraft. Being a pilot myself I am very aware of the dangers that Icing can pose and the effects it can have on an airplane. A couple of the missions of the Icing branch is to make flying safer with more research to increase our knowledge of how ice effects the aerodynamics of an airfoil, and to increase are knowledge of the weather for better forecasting. The Icing Branch uses three different tools to determine the aerodynamic affects that icing has on a wing. The Icing research tunnel is an efficient way to test various airfoils in a controlled setting. To make sure the data received from the wind tunnel is accurate the Icing branch conducts real flight tests with the DHC-6 Twin Otter. This makes sure that the methods used in the wind tunnel accurately model what happens on the actual aircraft. These two tools are also compared to the LEWICE code which is a program that models the ice shape that would be formed on an airfoil in the particular weather conditions that are input by the user. One benefit of LEWICE is that it is a lot cheaper to run than the wind tunnel or flight tests which make it a nice tool for engineers designing aircraft that don t have the money to spend on icing research. Using all three of these tools is a way to cross check the data received from one and check it against the other two. industries, but it is also looked at by weather analysts who are trying to improve forecasting methods. The best way to avoid the troubles of icing encounters is to not go into it in the first place. By looking over the flight data the analyst can determine which conditions will most likely lead to an icing encounter and then this information will aid forecasters when briefing the pilots on the weather conditions. am looking at the weather data from certain flights and analyzing the type of precipitation that the plane is flying through. During flight tests there is a probe on the bottom of the aircraft that gathers information on the size and shape of the particles that it is flying through. The data can then be viewed on a computer. After grouping the weather into certain groups we can then pick certain groups which we think should be analyzed farther. The goal is to remove all the ice particles because they do not contribute to the icing on an aircraft. We use a 2D analyzer which measures the droplet size and categorizes the drops into bins of certain sizes. We can then look at what the characteristics of the weather that we were flying through such as the temperature and dew point and compare this with the size of the drops that the 2D analyzer measured. We can then look at what type and shape of ice that formed on the wing during this time period. Having this data will help us to reproduce these conditions using LEWICE and the wind tunnel. Having consistency among the tests will make things more accurate. With respect to weather forecasting we will be able to learn which conditions can lead to icing. Better accuracy in weather reporting will lead to fewer run-ins with icing which will also lead to fewer accidents.

Miller, Eric James↗
NASA NTRS1994

Nonthermal processes in flaring X-ray-bright points

X-ray-bright point (XBPs) are known to show variability on a number of timescales, including impulsive X-ray brightenings. The relationship between these XBP 'flares' and normal solar flares is poorly known. A fundamental question is whether nonthermal acceleration of particles takes place in XBP flares. We address this issue by searching for nonthermal radio emission at metric wavelengths from flaring XBPs identified in Yohkoh soft x-ray telescope (SXT) data. Unequivocal evidence for type III-like radio bursts, usually attributed to beams of nonthermal electrons on open field lines, is found. This suggests that XBP flares are similar to normal flares and can indeed accelerate nonthermal populations of energetic particles.

Kundu, M. R.↗
DOE OSTI2021

Investigation of δ zirconium hydride morphology in a single crystal using quantitative phase field simulations supported by experiments

In light water nuclear reactors, waterside corrosion of the cladding material leads to the production of hydrogen, a fraction of which is picked up by the zirconium cladding and precipitates into brittle hydride particles. These nanoscale hydride particles aggregate into mesoscale hydride clusters. The principal stacking direction of the nanoscale hydrides precipitated in the cladding tube changes from circumferential in the absence of applied stress to radial under circumferential applied stress. A quantitative phase field model has been developed to predict the hydride morphology observed experimentally and identify the mechanisms responsible for nanoscale hydride stacking. The model focuses on nanoscale hydride precipitation in a single zirconium grain with a detailed description of the anisotropic elastic contribution. The model predictions concerning the shape, orientation, and stacking behavior of nanoscale hydride are analyzed and compared with experimental observations. The model accurately accounts for the experimentally observed elongated nanoscale hydride shape and the stacking of hydrides along the basal plane of the hexagonal zirconium matrix. When investigating the role of applied stress in hydride morphology, the model challenges some of the mechanisms previously proposed to explain hydride reorientation. Finally, although hydride reorientation has been hypothesized to be caused by a change in nanoscale hydride shape, the current study shows that these mechanisms are unlikely to occur.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Gravothermal collapse and the diversity of galactic rotation curves

The rotation curves of spiral galaxies exhibit a great diversity that challenges our understanding of galaxy formation and the nature of dark matter. Previous studies showed that in self-interacting dark matter (SIDM) models with a cross section per unit mass of σ/m ≈ $\mathscr{O}$(1) cm 2 /g, the predicted dark matter central densities are a good match to the observed densities in galaxies. Here, in this work, we explore a regime with a larger cross section of σ/m ≈ 20−40 cm 2 /g in dwarf galactic halos. We will show that such strong dark matter self-interactions can further amplify the diversity of halo densities inherited from their assembly history. High concentration halos can enter the gravothermal collapse phase within 10 Gyr, resulting in a high density, while low concentration ones remain in the expansion phase and have a low density. We fit the rotation curves of 14 representative low surface brightness galaxies and demonstrate how the large range of observed central densities is naturally accommodated in the strong SIDM regime of σ/m ≈ 20 – 40 cm 2 /g. Galaxies that are outliers in the previous studies, due to their high halo central densities, are no longer outliers in this SIDM regime as their halos would be in the collapse phase. For galaxies with a low density, the SIDM fits are robust to the variation of the cross section. Our findings open up a new window for testing gravothermal collapse, the unique signature of strong dark matter self-interactions, and exploring a broader SIDM model space. As an example, we illustrate how the larger cross sections favored by our fits, together with upper limits from strong lensing observations in clusters, pick out the preferred SIDM model space for a dark matter particle coupled to a light gauge boson in the Born regime.

dark matter↗
NASA NTRS1997

Development of coronal mass ejections and association with interplanetary events

Results are presented on the development of two coronal mass ejections (CMEs) obtained by comparing the observations of the large angle spectroscopic coronagraph (LASCO) and the extreme ultraviolet imaging telescope (EIT) instrument onboard the SOHO with those of the Nancay radioheliograph. The radioheliograph provides images at five levels in the corona. An excellent spatial association is found between the position and extent of the type 4 radio sources and the CMEs seen by LASCO. One result is the existence for these two events of discrete successive phases in their development. For these events, Ulysses and SOHO missions measured interplanetary particles of coronal origin. The coronal acceleration site was attempted to be identified, as well as the path of these particles from the corona to the interplanetary medium.

Pick, M.↗
NASA NTRS1993

Pick-up ions at Pluto

Methane molecules escaping from Pluto's atmosphere are ionized, and the resulting ions are picked up by the solar wind. The mass loading associated with this ion pick-up can produce a cometlike interaction of the solar wind with Pluto. Heavy ion gyroradii are as large as a half million km in the weak interplanetary magnetic field that exists at 30 AU, which is about an order of magnitude larger than the size of the 'interaction region'. We have calculated velocity space distributions of pick-up ions using numerically determined ion trajectories. The predicted pick-up ion fluxes are high enough to be detectable by standard charged particle detectors as far upstream of Pluto as 10 exp 6 km.

Kecskemety, K.↗
NASA NTRS1989

Plasma wave observations at Comets Giacobini-Zinner and Halley

Cometary plasma wave measurements in the spectral range from the lower hybrid resonance frequency to the electron plasma frequency are presented for the Comets Giacobini-Zinner and Halley. The results show the significant role played by plasma physics in controlling the solar wind interaction with a comet. A variety of very strong wave-particle interactions are found to develop in the entire region where strong mass loading occurs, and additional important plasma instabilities are found in the vast region where newly-born ions are picked up by the solar wind. The difficulties involved in making plasma wave measurements in the presence of large fluxes of dust particles impacting the spacecraft at high speed are discussed.

Scarf, Frederick↗
NASA NTRS1976

Non-thermal processes during the 'build-up' phase of solar flares and in absence of flares

Hard X-ray and radio observations indicate production of non-thermal electrons as a common phenomenon of the active sun. A preliminary analysis of three hard X-ray bursts observed with the OGO-5 satellite and radio observations indicate that non-thermal particles are present in the flare region prior to the impulsive (flash) phase and also during the gradual rise and fall (GRF) bursts which are usually explained in terms of purely 'thermal' radiation. The principal difference between the non-thermal electrons observed before the flash phase and during the flash phase appears to be in their total number rather than in the hardness of their energy spectrum. Basic characteristics of the two acceleration processes are probably similar although the total energy converted into non-thermal electrons is considerably larger in the flash phase. Transient absorbing H-alpha features and filament activations are discussed in terms of their ability to produce energetic particle events and magnetic energy release.

Kane, S. R.↗