Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oxygen reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Titanium nitride prepared by the urea-glass synthesis gives an active electrocatalyst for the oxygen reduction reaction

Rock-salt-structured titanium nitride (TiN) has emerged as a leading earth-abundant electrocatalyst for the oxygen reduction reaction (ORR). We compare TiN prepared in three ways starting from urea: the urea–glass method, by a direct reaction between urea and titanium(IV) chloride, and through a discrete monomeric complex. In the urea-glass route, a new-found [Ti 4 (µ-O) 6 (OC(NH 2 ) 2 ) 12 ] 4+ oxo-bridged titanium–urea precursor can be synthesized in a single-pot reaction at room temperature starting from titanium(IV) chloride, urea, and ethanol with a urea-to-titanium ratio of 6. Subsequent annealing of the polymeric gel that results at 750 °C in an N 2 atmosphere yields phase-pure, TiN particles on the 100 µm size scale. TiN can be deposited as an ink with PiperlON®anion exchange dispersion onto a glassy carbon rotating disk electrode (RDE), and of the three synthesis methods, the urea-glass method gives the most active ORR catalyst. The onset potential for ORR activity is −131 mV vs. Hg/HgO, and Koutecký–Levich analysis of linear-sweep voltammetry recorded at varying rotation rates supports a two-electron reduction pathway to H 2 O 2 , with a rate constant of 0.0172 cm s −1 . The higher activity is ascribed to a more oxygen-rich surface—boh defect sites and active oxygen species—afforeded by the oxo-bridged precursor, corrorborated by X-ray photoelectron spectroscopy (XPS) analysis.

Xie, Wanrui [University of Michigan, Ann Arbor, MI↗
DOE OSTI2024

Shallow Rate-Redox Potential Scaling in Aqueous Molecular Oxygen Reduction Electrocatalysis Across a Family of Iron Macrocycles

Rate-overpotential scaling relationships have been employed widely to understand trends in oxygen reduction reaction (ORR) electrocatalysis by dissolved metal macrocycles in organic electrolytes. Similar scaling relationships remain unknown for surface-adsorbed ORR electrocatalysts in the acidic aqueous environments germane to proton-exchange membrane (PEM) fuel cells. Herein, we examine ORR catalysis in aqueous perchloric acid media for a structurally diverse array of iron macrocycle complexes adsorbed on Vulcan carbon black. The macrocycles encompass Fe– N 4 , Fe–N 2 N' 2 and Fe–N x C 4-x motifs bearing pyrrolic, pyridinic, and N-heterocyclic carbene (NHC) moieties in the primary ligation sphere, giving rise to a 670 mV range in Fe(III/II) redox potentials, E Fe(III/II) . Experimental Tafel data in the micropolarization regime were extrapolated to the E Fe(III/II) to furnish estimated per-site-normalized current density (j per-site ) values that span ~4.6 orders of magnitude across the family of compounds. Despite the structural diversity of this family of compounds, extrapolated j per-site values correlate with the Fe(III/II) redox potentials in a roughly log-linear fashion with a shallow scaling factor of approximately 145 mV/decade. Further, these findings highlight that negative shifts in E Fe(III/II) lead to diminishing returns in catalytic rate promotion and suggest that changes to the primary ligating environment in a macrocycle are insufficient to break fundamental rate-potential scaling relationships in aqueous ORR catalysis. Together these studies motivate the further development of higher-potential iron complexes that employ motifs beyond the equatorial ligation plane to enhance ORR catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Bifunctional Electrocatalysts with High-Entropy Alloys: Bridging Hydrogen Evolution and Oxygen Reduction

High-entropy alloys (HEAs) have emerged as a promising class of bifunctional electrocatalysts capable of simultaneously driving the hydrogen evolution reaction (HER) and the oxygen reduction reaction (ORR) with high activity and durability. Their near-equiatomic multicomponent compositions give rise to unique physicochemical characteristics, including lattice distortion, sluggish diffusion, high-entropy stabilization, and pronounced electronic heterogeneity, that collectively generate diverse and synergistic active sites inaccessible in conventional alloys. This review summarizes recent progress in HEA-based bifunctional electrocatalysis, with a focus on the fundamental mechanisms governing HER and ORR activity, stability, and selectivity. We discuss advances in synthesis strategies, ranging from confined growth and step-alloying to scalable continuous-flow methods, that enable precise control over composition, size, and surface structure. Complementary computational and data-driven approaches, including density functional theory, machine-learning-assisted screening, and descriptor development, are highlighted as essential tools for navigating the vast HEA design space and establishing structure−property relationships. Particular attention is paid to adsorption-energy distributions, multisite cooperativity, and environmental effects under realistic electrochemical conditions. Finally, we outline current challenges and future opportunities for integrating mechanistic understanding with AI-guided, closed-loop design frameworks to accelerate the discovery of next-generation HEA bifunctional electrocatalysts for sustainable energy conversion.

Alloys↗
DOE OSTI2025

Unraveling Dimensional Tuning: From 2D to 3D in Covalent Organic Frameworks for Enhanced 2e – Oxygen Reduction Reaction

Covalent organic frameworks (COFs) with a two-dimensional (2D) topology have recently emerged as promising catalyst systems for the electrosynthesis of hydrogen peroxide (H 2 O 2 ) from oxygen (O 2 ). However, designing 2D catalysts to achieve higher H 2 O 2 selectivity presents a significant challenge because of the extensive layer stacking and the aggregated active sites located in the basal planes. It results in lower atom utilization, which requires attention. In this study, we present two functionally similar COFs: one with a 2D rhombus topology (2D@BT_TPA-COF) and another with a three-dimensional (3D) noninterpenetrated pts topology (3D@BT_TPA-COF). Both COFs were utilized for the 2e – oxygen reduction reaction (2e – ORR). Tunning the dimensionality from 2D to 3D resulted in an increase in H 2 O 2 selectivity from approximately ~56% to approximately ~96% (at 0.4 V) and a rise in the turnover frequency (TOF) from 0.05 to 0.08 s –1 at 0.3 V. Nonaggregated active site distribution over 3D topology, featuring higher active site exposure, provides better access to the O 2 /electrolyte and facilitates electron transfer leading to higher 2e – ORR activity and selectivity compared to the 2D counterpart.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Nitrogenated Graphene Quantum Dot-Derived Copper Single-Atom Catalyst for Oxygen Reduction Reaction

Despite the promise of fuel cells as sustainable energy conversion technologies, their widespread adoption is hindered by the high cost of platinum group metal (PGM) catalysts, particularly for catalyzing the oxygen reduction reaction (ORR) at the cathode. Here, we report copper-based single-atom catalysts (Cu-SACs) as cost-effective non-PGM alternatives for ORR. The catalysts were synthesized via simple pyrolysis of pyrene-derived amine-terminated graphene quantum dots (GQDs) in the presence of nitrogen and metal precursors. The abundant nitrogen functionality in GQDs effectively stabilized isolated Cu atoms during their conversion to porous carbon. A subsequent acid-washing step yielded a high density of atomically dispersed Cu active sites. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and high-resolution scanning transmission electron microscopy (HR-STEM) confirmed the effective incorporation of isolated Cu atoms into the carbon matrix through copper–nitrogen (Cu-N) coordination. Electrochemical measurements revealed excellent ORR activity with a dominant four-electron pathway. This synthetic strategy provides a practical route to developing economically viable, non-precious metal catalysts.

catalysts↗
DOE OSTI2025

Permanent Nanobubbles in Water: Liquefied Hollow Carbon Spheres Break the Limiting Diffusion Current of Oxygen Reduction Reaction

Porous liquids have traditionally been designed with sterically hindered solvents. Alternatively, recent efforts rely on dispersing microporous frameworks in simpler solvents like water. Here we report a unique strategy to construct macroporous water by selectively incorporating hydrophilicity on the surfaces of hydrophobic hollow carbon spheres (HCS). Specifically, we show that the stable dispersion surface ionized HCS in water while retaining the inherent porosity. The electrocatalytic conversion of small gas molecules in aqueous electrolytes is limited by the concentration and diffusion rates of gas molecules in water. In this case, macroporous water exhibited 6 times gas uptake compared to nonporous (pure) water. Furthermore, by leveraging the high gas capacity and enhanced diffusion kinetics, the limiting diffusion current of oxygen reduction reaction (ORR) in macroporous water is 2 times that in nonporous water, offering promising prospects for sustainable energy conversion technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A Post-translational Histidine–Histidine Cross-Link Enhances Enzymatic Oxygen Reduction Activity with Greater pH Adaptability

Cross-linked protein residues exist as enzyme cofactors to enable or enhance catalytic activities. Despite their importance in nature, the chemical identity of the cross-links is limited to certain amino acid combinations, whose function and the formation mechanism remain insufficiently understood due to the difficulty in isolating native enzymes without the cross-links. Herein, we report the formation and characterization of both His-Tyr and His-His cross-links under oxidative enzymatic turnover conditions in L29H/F33Y/F43H Mb, a structural and functional model of heme-copper oxidase (HCO). The connectivity of the cross-link was characterized as Ne ε2 (His29)-Cd δ2 (His43) by mass spectrometry (LC-MS/MS) and nuclear magnetic resonance (NMR). Interestingly, formation of the cross-link significantly enhances the oxygen reduction activity of the enzyme at neutral or basic pH with higher product specificity. X-ray crystallography has identified a novel Tyr-His cross-link through a Tyr-O-His linkage. Our mechanistic studies indicate the involvement of high-valent heme-iron and the neighboring tyrosine in an oxidative self-processing pathway to generate the cross-link. In conclusion, this work serves as a new example while providing insights into the enzyme cross-link formation, allowing the design of artificial biocatalysts containing these novel cross-links with higher activity and pH adaptability.

Liu, Yiwei [Univ. of Texas, Austin, TX (United Sta↗
DOE OSTI2026

Carbon nanodot precursors enable ultrahigh-loading copper single-atom catalysts for oxygen reduction reaction

Single-atom catalysts (SACs) have attracted significant attention in electrocatalysis due to their high metal utilization and tunable electronic structures; however, their practical implementation is often limited by poor atomic dispersion, low metal loadings (typically < 1 wt%), and insufficient anchoring of single metal atoms on catalyst supports. Herein, we report a simple and versatile strategy to synthesize copper single-atom catalysts (Cu-SACs) with ultrahigh metal loading using citric-acid-derived carbon nanodots as metal-capturing precursors. Through hydrothermal treatment followed by pyrolysis in the presence of urea, atomically dispersed copper atoms coordinated with nitrogen are incorporated into a carbon framework, achieving a Cu loading of up to 20 wt% while maintaining atomic dispersion. Notably, a significant fraction of the copper single atoms exists as Cu+–N2 coordination, which provides under-coordinated and catalytically active sites. The resulting Cu-SAC exhibits promising oxygen reduction reaction (ORR) activity in alkaline media, delivering a limiting current density comparable to that of commercial 20 wt% Pt/C with a predominant four-electron reduction pathway. Despite this high intrinsic activity, durability tests reveal gradual performance degradation under prolonged electrochemical operation, which is attributed to demetallation and aggregation of copper single atoms into metallic nanoparticles. These results demonstrate the potential of carbon nanodot-based platforms for synthesizing high-loading SACs, while underscoring the critical need to simultaneously control carbon porosity and metal–nitrogen coordination to enhance active-site accessibility and durability.

Sharma, Prakhar [University of Kentucky]↗
DOE OSTI2025

High-Loading Single-Atom Catalyst via On-Surface Synthesis of a Metal-Covalent Organic Framework for Oxygen Reduction Reaction

The development of active catalysts with both high metal efficiency and use of earth abundant metals is the ultimate goal for advancing the required commercially viable and sustainable energy conversion technologies of the future. Metal-organic frameworks (MOFs) have emerged as promising candidates due to their high surface area and tunable active sites. Here, this study aims to fabricate a new type of high metal loading single-atom catalysts (SACs) based on 2D metal-organic covalent organic frameworks (MCOFs) with uniform, active and stable Fe-N 3 sites. The MCOFs were synthesized through an on-surface polymerization process using Fe and melamine as precursors. The polymerization steps were characterized using operando high-pressure scanning tunneling microscopy (HP-STM), in situ X-ray photoelectron spectroscopy (XPS), low-temperature STM (LT-STM), and computational calculations. The synthesized MCOFs demonstrated favorable adsorption and activation of O 2 at the Fe-N 3 sites, and it is predicted to be active for the oxygen reduction reaction (ORR). The surface chemistry and functionality of 2D MCOFs can be rationally designed by varying the metal atoms and organic linkers, offering a versatile platform for diverse applications.

25 ENERGY STORAGE↗
DOE OSTI2025

Unsupported and carbon-supported silver catalysts for oxygen reduction reaction in alkaline media

Quick and easy Ag catalysts preparation via wet chemical synthesis method using only reducing agent (pure-Ag); reducing agent and citric acid as the capping agent (Ag-CA); and carbon support (KetjenBlack 600J), capping agent, and the reducing agent (Ag/C) is demonstrated. The Ag-based electrocatalysts are characterized by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) with energy-dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis, and X-ray photoelectron spectroscopy (XPS). The electrocatalytic activity of Ag catalysts for O 2 reduction reaction (ORR) in 1 M KOH is evaluated using the rotating (ring)-disc electrode method. SEM and HAADF-STEM results show that the unsupported pure-Ag and Ag-CA catalysts consist mainly of big agglomerates, and Ag/C has the smallest agglomerates and some sub-3 nm Ag nanoparticles. The XPS results reveal that Ag in all the catalysts is in the metallic form (Ag 0 ). Despite consisting of big agglomerates, the Ag-CA catalyst exhibits similar ORR electrocatalytic activity to that of Ag/C. Ag-CA (unsupported) shows the lowest hydrogen peroxide yield. These results are of great importance for the development of Ag-based catalysts that can be prepared in a fast, simple and easily up scalable fashion, for anion exchange membrane fuel cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Breaking the Linear Scaling Relations for the Oxygen Reduction Reaction with a Dual‐Atom Catalyst Composed of a MnFe‐Porphyrrole Aerogel

Bimetallic catalysts offer enhanced catalytic performance through synergistic interactions between the two metals, allowing them to break the linear scaling relations and reach high electrocatalytic activity. This study presents bimetallic aerogel-based catalyst synthesized as a covalent, three-dimensional framework containing neighboring iron and manganese sites. The aerogel structure provides a high surface area and porosity, facilitating an ultra-high active site density and efficient mass transport. The MnFe porphyrrole's unique structure is obtained by alternately linking Mn-porphyrin and Fe-corrole complexes. It exhibited outstanding performance with an onset potential of 0.99 V RHE . Comparative studies with a free-base Fe porphyrrole catalyst (E onset 0.97 V RHE ) revealed that while Mn incorporation led to only a slight improvement in half-cell performance, it resulted in significantly enhanced performance in anion exchange membrane fuel cell. The MnFe catalyst achieved an OCV of 0.97 V and a peak power density of 0.27 W cm −2 , outperforming the free-base Fe counterpart. Using density functional theory calculations, we show that the higher ORR activity of MnFe-porphyrrole is due to charge transfer between Mn and Fe atoms, which is absent in the reference free-base Fe-porphyrrole. These findings underscore the advantages of bimetallic catalysts in improving ORR activity and fuel cell efficiency by leveraging synergistic effects.

Aerogel↗
DOE OSTI2025

Direct Conversion of MnO2 into Atomic Mn Sites for Oxygen Reduction

Development of platinum group metal (PGM)-free catalysts has been investigated to replace the platinum group metal catalyst in future inexpensive polymer electrolyte membrane (PEM) fuel cells. Usually, synthetic methods for these PGM-free catalysts involve introducing transition-metal salts or molecules. Herein, we demonstrate a facile synthetic method to prepare PGM-free Mn-N-C catalysts by directly converting manganese oxides into highly active MnN4 sites. Typically, MnO2 is used as a Mn source. Ammonium chloride and benzimidazole are introduced during high-temperature treatment to enhance catalytic activity and stability further. Ammonia generated from the decomposition of ammonium chloride can improve the intrinsic ORR activity of MnNx moieties through chemical or electronic effects by introducing additional nitrogen groups. The Mn-N-C catalyst exhibits promising ORR activity, achieving a half-wave potential of 0.83 V in 0.5 M H2SO4, outperforming most PGM-free ORR catalysts. The robust carbon structure resulting from organic-molecule treatment is also verified by electrochemical and physical characterization, thereby improving the catalyst's durability.

Yang, Xiaoxuan↗
DOE OSTI2026

The origin of metallic conductivity in Pt 3 O 4 : a first principles study

The platinum oxide Pt 3 O 4 exhibits metallic conductivity even though it contains square-planar PtO4 units, which in related oxides such as PtO are usually associated with insulating behavior. To identify the electronic origin of this anomalous metallicity, we performed a comprehensive first-principles study using the PBE and r 2 SCAN functionals together with Hubbard U corrections and spin-orbit coupling (SOC). Structural benchmarks show that r 2 SCAN with SOC and a moderate U value (<4 eV) reproduces the experimental lattice constants and formation enthalpy, whereas larger U values (~8 eV) destabilize the cubic structure. Across all functionals and U values considered in this work, Pt 3 O 4 remains metallic. Analyses of the projected density of states, band structures, charge-density isosurfaces, and bonding characteristics demonstrate that the dominant contribution to the metallic character originates from delocalized Pt–O–Pt hybridized antibonding states at the Fermi level. Direct Pt–Pt interactions are present but contribute less strongly to the conductivity. Bader charge analysis reveals only weak Pt charge disproportionation, consistent with mixed Pt II /Pt III character, and a small charge-transfer energy that prevents localization of the Pt 5d electrons even at elevated U. In contrast, PtO develops a Mott or charge-transfer gap under modest U despite having the same PtO 4 coordination environment. These findings demonstrate that persistent Pt–O–Pt covalency is the primary driver of metallicity in Pt 3 O 4 and support the view that this phase can remain conductive under oxygen reduction and oxygen evolution reaction conditions in fuel cell and electrolyzer environments.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Review of Carbon Support Coordination Environments for Single Metal Atom Electrocatalysts (SACS)

This topical review focuses on the distinct role of carbon support coordination environment of single-atom catalysts (SACs) for electrocatalysis. The article begins with an overview of atomic coordination configurations in SACs, including a discussion of the advanced characterization techniques and simulation used for understanding the active sites. A summary of key electrocatalysis applications is then provided. These processes are oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), nitrogen reduction reaction (NRR), and carbon dioxide reduction reaction (CO 2 RR). The review then shifts to modulation of the metal atom-carbon coordination environments, focusing on nitrogen and other non-metal coordination through modulation at the first coordination shell and modulation in the second and higher coordination shells. Representative case studies are provided, starting with the classic four-nitrogen-coordinated single metal atom (M$-$N 4 ) based SACs. Bimetallic coordination models including homo-paired and hetero-paired active sites are also discussed, being categorized as emerging approaches. The theme of the discussions is the correlation between synthesis methods for selective doping, the carbon structure–electron configuration changes associated with the doping, the analytical techniques used to ascertain these changes, and the resultant electrocatalysis performance. In conclusion, critical unanswered questions as well as promising underexplored research directions are identified.

36 MATERIALS SCIENCE↗