SEARCH · Engineering Papers

Results for “octahedral rotations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Refining perovskite structures to pair distribution function data using collective Glazer modes as a basis

Structural modelling of octahedral tilts in perovskites is typically carried out using the symmetry constraints of the resulting space group. In most cases, this introduces more degrees of freedom than those strictly necessary to describe only the octahedral tilts. It can therefore be a challenge to disentangle the octahedral tilts from other structural distortions such as cation displacements and octahedral distortions. This paper reports the development of constraints for modelling pure octahedral tilts and implementation of the constraints in diffpy-CMI, a powerful package to analyse pair distribution function (PDF) data. The model in the program allows features in the PDF that come from rigid tilts to be separated from non-rigid relaxations, providing an intuitive picture of the tilting. The model has many fewer refinable variables than the unconstrained space group fits and provides robust and stable refinements of the tilt components. It further demonstrates the use of the model on the canonical tilted perovskite CaTiO 3 which has the known Glazer tilt system α + β – β – . The Glazer model fits comparably to the corresponding space-group model Pnma below r = 14 Å and becomes progressively worse than the space-group model at higher r due to non-rigid distortions in the real material.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Uniaxial Strain Control of Bulk Ferromagnetism in Rare-Earth Titanates

The perovskite rare-earth titanates are model Mott insulators with magnetic ground states that are very sensitive to structural distortions. These distortions couple strongly to the orbital degrees of freedom and, in principle, it should be possible to tune the superexchange and the magnetic transition with strain. We investigate the representative system (Y,La,Ca)TiO 3 , which exhibits low crystallographic symmetry and no structural instabilities. From magnetic susceptibility measurements of the Curie temperature, we demonstrate direct, reversible, and continuous control of ferromagnetism by influencing the TiO 6 octahedral tilts and rotations with uniaxial strain. The relative change in T C as a function of strain is well described by ab initio calculations, which provides detailed understanding of the complex interactions among structural, orbital, and magnetic properties in rare-earth titanates. The demonstrated manipulation of octahedral distortions opens up far-reaching possibilities for investigations of electron-lattice coupling, competing ground states, and magnetic quantum phase transitions in a wide range of quantum materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

Imaging Ferroelastic Domain Walls in Hybrid Improper Ferroelectric Sr 3 Sn 2 O 7

For this work, we combined synchrotron-based near field infrared spectroscopy and atomic force microscopy to image the properties of ferroelastic domain walls in Sr 3 Sn 2 O 7 . Although frequency shifts at the walls are near the limit of our sensitivity, we can confirm semiconducting rather than metallic character and widths between 20 and 60 nm. The latter is significantly narrower than in other hybrid improper ferroelectrics like Ca 3 Ti 2 O 7 . We attribute this trend to the softer lattice in Sr 3 Sn 2 O 7 , which may enable the octahedral tilt and rotation order parameters to evolve more quickly across the wall without significantly increased strain. These findings are crucial for the understanding of phononic properties at interfaces and the development of domain wall-based devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Thickness and temperature dependence of the atomic-scale structure of SrRuO 3 thin films

The temperature-dependent layer-resolved structure of 3 to 44 unit cell thick SrRuO 3 (SRO) films grown on Nb-doped SrTiO 3 substrates is investigated using a combination of high-resolution synchrotron x-ray diffraction and high-resolution electron microscopy to understand the role that structural distortions play in suppressing ferromagnetism in ultra-thin SRO films. The oxygen octahedral tilts and rotations and Sr displacements characteristic of the bulk orthorhombic phase are found to be strongly dependent on temperature, the film thickness, and the distance away from the film–substrate interface. For thicknesses, t, above the critical thickness for ferromagnetism (t > 3 uc), the orthorhombic distortions decrease with increasing temperature above T C . Below T C , the structure of the films remains constant due to the magneto-structural coupling observed in bulk SRO. The orthorhombic distortions are found to be suppressed in the 2–3 interfacial layers due to structural coupling with the SrTiO 3 substrate and correlate with the critical thickness for ferromagnetism in uncapped SRO films.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Pressure-dependent phase transitions in hybrid improper ferroelectric Ruddlesden-Popper oxides

The temperature-dependent phase transitions in Ruddlesden-Popper oxides with perovskite bilayers have been under increased scrutiny in recent years due to the so-called hybrid improper ferroelectricity that some chemical compositions exhibit. However, little is currently understood about the hydrostatic pressure dependence of these phase transitions. Herein we present the results of a combined high-pressure powder synchrotron x-ray diffraction experiment and a b i n i t i o study on the bilayered Ruddlesden-Popper phases Ca 3 Mn 2 O 7 and Ca 3 Ti 2 O 7 . In both compounds we observe a first-order phase transition, that in combination with our density functional theory calculations, we can confidently assign as being between polar A 2 1 a m and nonpolar A c a a structures. Interestingly, we show that while the application of pressure ultimately favors a nonpolar phase, as is commonly observed for proper ferroelectrics, regions of response exist where pressure actually acts to increase the polar mode amplitudes. The reason for this can be untangled by considering the varied response of octahedral tilts and rotations to hydrostatic pressure and their trilinear coupling with the polar instability. Published by the American Physical Society 2024

Materials Science↗

DOE OSTI2023

Tunable ferroelectricity in oxygen-deficient perovskites with Grenier structure

Using first-principles calculations, we predict that tunable ferroelectricity can be realized in oxide perovskites with the Grenier structure and ordered oxygen vacancies. Specifically, we show that R 1/3 A 2/3 FeO 2.67 solids (where R is a rare-earth ion and A an alkaline-earth cation) exhibit polar phases, with a spontaneous polarization tunable by an appropriate choice of R and A. We find that larger cations combined with small R elements lead to a maximum in the polarization and to a minimum in the energy barriers required to switch the sign of the polarization. Ferroelectricity arises from cooperative distortions of octahedral and tetrahedral units, where a combination of rotational and sliding modes controls the emergence of polarization within three-dimensional connected layers. Our results indicate that polar Grenier phases of oxide perovskites are promising materials for microelectronic applications and, in general, for the study of phenomena emerging from breaking inversion symmetry in solids.

Electronic devices↗

DOE OSTI2023

Atomistic insight into the ferroelastic post-stishovite transition by high-pressure single-crystal X-ray diffraction

Abstract The post-stishovite transition is a classic pseudo-proper typed ferroelastic transition with a symmetry-breaking spontaneous strain. This transition has been studied using high-pressure spontaneous strains, optic modes, and elastic moduli (Cij) based on the Landau modeling, but its atomistic information and structural distortion remain poorly understood. Here we have conducted synchrotron single-crystal X-ray diffraction measurements on stishovite crystals up to 75.3 GPa in a diamond-anvil cell. Analysis of the data reveals atomic positions, bond lengths, bond angles, and variations of SiO6 octahedra across the transition at high pressure. Our results show that the O coordinates split at ~51.4 GPa, where the apical and equatorial Si-O bond lengths cross over, the SiO6 octahedral distortion vanishes, and the SiO6 octahedra start to rotate about the c axis. Moreover, distortion mode analysis shows that an in-plane stretching distortion (GM1+ mode) occurs in the stishovite structure at high pressure while a rotational distortion (GM2+ mode) becomes dominant in the post-stishovite structure. These results are used to correlate with elastic moduli and Landau parameters (symmetry-breaking strain e1–e2 and order parameter Q) to provide atomistic insight into the ferroelastic transition. When the bond lengths of two Si-O bonds are equal due to the contribution from the GM1+ stretching mode, C11 converges with C12, and the shear wave VS1[110] polarizing along [110] and propagating along [110] vanishes. Values of e1–e2 and Q are proportional to the SiO6 rotation angle from the occurrence of the GM1+ rotational mode in the post-stishovite structure. Our results on the pseudo-proper type transition are also compared with that for the proper type in albite and improper type in CaSiO3 perovskite. The symmetry-breaking strain, in all these types of transitions, arises as the primary effect from the structural angle (such as SiO6 rotation or lattice constant angle) and its relevant distortion mode in the low-symmetry ferroelastic phase.

Geochemistry & Geophysics↗

DOE OSTI2024

High-field/high-frequency electron spin resonances of Fe-doped β − Ga 2 O 3 by terahertz generalized ellipsometry: Monoclinic symmetry effects

We demonstrate detection and measurement of electron paramagnetic spin resonances (EPR) of iron defects in β − Ga 2 O 3 utilizing generalized ellipsometry at frequencies between 110 and 170 GHz. The experiments are performed on an Fe-doped single crystal in a free-beam configuration in reflection at 45 ∘ and magnetic fields between 3 and 7 T. In contrast with low-field, low-frequency EPR measurements, we observe all five transitions of the s = 5 / 2 high-spin state Fe 3 + simultaneously. We confirm that ferric Fe 3 + is predominantly found at octahedrally coordinated Ga sites. We obtain the full set of fourth-order monoclinic zero-field splitting parameters for both octahedrally and tetrahedrally coordinated sites by employing measurements at multiple sample azimuth rotations. The capability of high-field EPR allows us to demonstrate that simplified second-order orthorhombic spin Hamiltonians are insufficient, and fourth-order terms as well as consideration of the monoclinic symmetry are needed. These findings are supported by computational approaches based on density-functional theory for second-order and on ligand-field theory for fourth-order parameters of the spin Hamiltonian. Terahertz ellipsometry is a way to measure spin resonances in a cavity-free setup. Its possibility of varying the probe frequency arbitrarily without otherwise changing the experimental setup offers unique means of truly disentangling different components of highly anisotropic spin Hamiltonians. Published by the American Physical Society 2024

Materials Science↗

NASA NTRS1986

Orientation and temperature dependence of some mechanical properties of the single-crystal nickel-base superalloy Rene N4. I - Tensile behavior

Single crystal specimens of a nickel-base superalloy with axes near 001, 011, and -112 were tested in tension at room temperature, 760, and 980 C. The alloy Rene N-4, was developed for gas turbine engine blades and has the nominal composition 3.7 Al, 4.2 Ti, 4 Ta, 0.5 Nb, 6 W, 1.5 Mo, 9 Cr, 7.5 Co, balance Ni, (all in weight percent). Analysis of slip band traces, specimen axis rotation, and dislocation Burgers vectors showed that at 760 and 980 C primary cube slip supplanted normal octahedral slip for the -112 line-oriented specimens. The other two orientations, which have lower resolved shear stresses on the cube system, exhibited octahedral slip at all three temperatures. The critical resolved shear stress is considerably greater on the cube system than on the octahedral system at room temperature. However, at 760 and 980 C the critical resolved shear stresses on the two systems are about the same. While the room temperature and 980 C yield strengths for the two orientations exhibiting octahedral slip could be rationalized on the basis of resolved shear stress, those at 760 C could not. Such violations of Schmid's law have previously been observed in other superalloys and single phase gamma-prime.

Miner, R. V.↗

NASA NTRS1951

Analysis of plane-plastic stress problems with axial symmetry in strain-hardening range

A simple method is developed for solving plane-plastic-stress problems with axial symmetry in the strain-hardening range which is based on the deformation theory of plasticity employing the finite-strain concept. The equations defining the problems are first reduced to two simultaneous nonlinear differential equations involving two dependent variables: (a) the octahedral shear strain, and (b) a parameter indicating the ratio of principal stresses. By multiplying the load and dividing the radius by an arbitrary constant, it is possible to solve these problems without iteration for any value of the modified load. The constant is determined by the boundary condition. This method is applied to a circular membrane under pressure, a rotating disk without and with a central hole, and an infinite plate with a circular hole. Two materials, inconel x and 16-25-6, the octahedral shear stress-strain relations of which do not follow the power law, are used. Distributions of octahedral shear strain, as well as of principal stresses and strains, are obtained. These results are compared with the results of the same problems in the elastic range.

Wu, M H Lee↗

NASA NTRS2002

Ultralightweight Space Deployable Primary Reflector Demonstrator

A concept has been developed and analyzed and several generational prototypes built for a gossamer-class deployable truss for a mirror or reflector with many smaller precisely-figured solid elements attached will, for at least the next several decades, minimize the mass of a large primary mirror assembly while still providing the high image quality essential for planet-finding and cosmological astronomical missions. Primary mirror segments are mounted in turn on ultralightweight thermally-formed plastic panels that hold clusters of mirror segments in rigid arrays whose tip/tilt and piston would be corrected over the scale of the plastic panels by the control segments. Prototype panels developed under this program are 45 cm wide and fabricated from commercially available Kaplan sheets. A three-strut octahedral tensegrity is the basis for the overall support structure. Each fundamental is composed of two such octahedrons, rotated oppositely about a common triangular face. Adjacent modules are joined at the nodes of the upper and lower triangles to form a deployable structure that could be made arbitrarily large. A seven-module dowel-and-wire prototype has been constructed. Deployment techniques based on the use of collapsing toggled struts with diagonal tensional elements allows an assembly of tensegrities to be fully collapsed and redeployed. The prototype designs will be described and results of a test program for measuring strength and deformation will be presented.

Montgomery, Edward E., IV↗

DOE OSTI2025

Helimagnetism in CrBr 2 and CrIBr

In Cr⁢𝑋 2 (𝑋 = Br, I), a Jahn-Teller effect distorts the octahedral configuration of the anions about Cr, resulting in a ribbon chain structure. We previously observed helimagnetism in CrI 2 propagating along the ribbon chains, with an 80–90° rotation per Cr ion. Via neutron scattering, we report that CrBr 2 and the solid solution CrIBr are also helimagnetic, with Néel temperatures of 17 and 12 K, respectively, and signs of intermediate magnetic transitions in both compounds. The helical angle between spins on consecutive Cr ions along the ribbon chains increases with increasing Br substitution, from 89.7° (CrI 2 ) to 116° (CrIBr) to 147° (CrBr 2 ), possibly as a result of decreasing longer-range intrachain spin interactions with the increased electron localization of the lighter anions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Operando X-ray absorption spectroscopic investigation of electrocatalysts state in anion exchange membrane fuel cells

Capturing the active state of (electro)catalysts under operating conditions, namely operando, is the ultimate objective of (electro)catalyst characterization, enabling the unraveling of reaction mechanisms and advancing (electro)catalyst development. Operando insights advance our understanding of the correlations between electrochemical tests and device-level performances. However, operando characterization of electrocatalysts is challenging due to the complexity of electrochemical devices and instrumental limitations. As a result, the majority of electrocatalyst characterizations have been limited to half-cell in situ studies. Here, we present an operando X-ray absorption spectroscopic study of Mn spinel oxide electrocatalysts in an operating fuel cell employing a custom-designed cell. Our results reveal that in anion exchange membrane fuel cells, the Mn valence state, within spinel Mn 3 O 4 /C, increases to above 3+, adopting an octahedral coordination devoid of Jahn-Teller distortions. This structural change results in an AEMFC performance equivalent to that of Co 1.5 Mn 1.5 O 4 /C, a composition that outperforms Mn 3 O 4 /C in rotating disk electrode tests. Our results underscore the importance of operando characterizations in elucidating the active state of electrocatalysts and understanding the correlation(s) between electrochemical tests and device performance.

Electrocatalysis↗

NASA NTRS1988

Muon motion in titanium hydride

Motional narrowing of the transverse-field muon spin rotation signal was observed in gamma-TiH(x) for x = 1.83, 1.97, and 1.99. An analysis of the data for TiH1.99 near room temperature indicates that the mechanism responsible for the motion of the muon out of the octahedral site is thermally activated diffusion with an attempt frequency comparable to the optical vibrations of the lattice. Monte Carlo calculations to simulate the effect of muon and proton motion upon the muon field-correlation time were used to interpret the motional narrowing in TiH1.97 near 500 K. The interpretation is dependent upon whether the Bloembergen, Purcell, and Pound (BPP) theory or an independent spin-pair relaxation model is used to obtain the vacancy jump rate from proton NMR T1 measurements. Use of BPP theory shows that the field-correction time can be obtained if the rate of motion of the muon with respect to the rate of the motion for the protons is decreased. An independent spin-pair relaxation model indicates that the field-correlation time can be obtained if the rate of motion for the nearest-neighbor protons is decreased.

Kempton, J. R.↗

DOE OSTI2025

On the Structural Origin of Fast Li-Ion Cycling in Tetragonal Bronze-Type Nb 8 W 9 O 47

Bronze and bronze-derived, mixed metal oxides are materials of growing interest for lithium-ion battery anodes due to their high-rate capabilities and the potential for high energy densities via multielectron redox. We report on the synthesis and electrochemical properties of the tetragonal tungsten bronzetype phase Nb 8 W 9 O 47 and our investigation into the structural evolution of this phase upon lithium (de)intercalation, with particular attention to how it relates to the fast-cycling capabilities. Electrochemical cycling shows Nb 8 W 9 O 47 can achieve greater than one Li + per transition metal at rates of C/2 or slower and maintains a capacity equivalent to 0.65 Li + per transition metal at a rate of 20C. Sequential Rietveld analysis of operando X-ray diffraction data reveals anisotropic changes to the unit cell parameters during discharge, accompanied by an off-centering of the transition metals within their octahedral environments. While higher capacities can be accessed below 1.2 V, cells discharged to 1.0 V exhibit a significant expansion of the unit cell volume and reduced Coulombic efficiencies. This report suggests that rigid crystal structures incapable of undergoing polyhedral rotational deformations can instead exploit displacive distortions of the transition metal redox center to enable fast Li-ion cycling with minimal atomic rearrangements.

25 ENERGY STORAGE↗

DOE OSTI2022

Flexible 2D Boron Imidazolate Framework for Polysulfide Adsorption in Lithium–Sulfur Batteries

We report the "polysulfide shuttle," a process initiated by the dissolution of polysulfides, is recognized to be one of the major failure mechanisms of lithium-sulfur (Li-S) batteries. Much research effort has been dedicated toward efficient cathode additives and host materials to suppress the leaching of polysulfide species. Herein, we report a new 2D metal-organic framework constituted by a tritopic ligand, boron imidazolate ([BH(Im) 3 ] - , Im = imidazole), and Co 2+ ions for lithium polysulfide adsorption. The cobalt imidazolate framework (CoN 6 -BIF) contains octahedrally coordinated Co centers that form two-dimensional layers in the a,b plane. Composite cathodes containing CoN 6 -BIF exhibited high sulfur utilization and capacity retention, resulting in improved specific capacity and cycle life compared to sulfur/carbon controls. Density functional theory (DFT) calculations suggest that CoN 6 -BIF linkers are rotationally flexible, allowing the framework to accommodate polysulfide in the expanded pores. This unusual property of BIFs opens up new avenues for exploring flexible metal-organic frameworks (MOFs) and their applications to energy storage.

25 ENERGY STORAGE↗

DOE OSTI2025

A quantum eigenvalue solver based on tensor networks

Electronic ground states are of central importance in chemical simulations, but have remained beyond the reach of efficient classical algorithms except in cases of weak electron correlation or one-dimensional spatial geometry. We introduce a hybrid quantum-classical eigenvalue solver that constructs a wavefunction ansatz from a linear combination of matrix product states in rotated orbital bases, enabling the characterization of strongly correlated ground states with arbitrary spatial geometry. The energy is converged via a gradient-free generalized sweep algorithm based on quantum subspace diagonalization, with a potentially exponential speedup in the off-diagonal matrix element contractions upon translation into compact quantum circuits of linear depth in the number of qubits. Chemical accuracy is attained in numerical experiments for both a stretched water molecule and an octahedral arrangement of hydrogen atoms, achieving substantially better correlation energies compared to a unitary coupled-cluster benchmark, with orders of magnitude reductions in quantum resource estimates and a surprisingly high tolerance to shot noise. This proof-of-concept study suggests a promising new avenue for scaling up simulations of strongly correlated chemical systems on near-term quantum hardware.

chemistry↗

DOE OSTI2023

Spin canting and lattice symmetry in La 2 CuO 4

While the dominant magnetic interaction in La 2 CuO 4 is superexchange between nearest-neighbor Cu moments, the pinning of the spin direction depends on weak anisotropic effects associated with spin-orbit coupling. The symmetry of the octahedral tilt pattern allows an out-of-plane canting of the Cu spins, which is compensated by an opposite canting in nearest-neighbor layers. A strong magnetic field applied perpendicular to the planes can alter the spin canting pattern to induce a weak ferromagnetic phase. In light of recent evidence that the lattice symmetry is lower than originally assumed, we take another look at the nature of the field-induced spin-rotation transition. Comparing low-temperature neutron diffraction intensities for several magnetic Bragg peaks measured in fields of 0 and 14 T, we find that a better fit is provided by a model in which spins rotate within both neighboring planes but by different amounts, resulting in a noncollinear configuration. Finally, this model allows a more consistent relationship between lattice symmetry and spin orientation at all Cu sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗