Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “numerical climate model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Improving Solution Accuracy and Convergence for Stochastic Physics Parameterizations with Colored Noise

Stochastic parameterizations are used in numerical weather prediction and climate modeling to help capture the uncertainty in the simulations and improve their statistical properties. Convergence issues can arise when time integration methods originally developed for deterministic differential equations are applied naively to stochastic problems. In previous studies, it has been demonstrated that a correction term, known in stochastic analysis as the Itô correction, can help improve solution accuracy for various deterministic numerical schemes and ensure convergence to the physically relevant solution without substantial computational overhead. The usual formulation of the Itô correction is valid only when the stochasticity is represented by white noise. In this study, a generalized formulation of the Itô correction is derived for noises of any color. The formulation is applied to a test problem described by an advection–diffusion equation forced with a spectrum of fast processes. We present numerical results for cases with both constant and spatially varying advection velocities to show that, for the same time step sizes, the introduction of the generalized Itô correction helps to substantially reduce time integration error and significantly improve the convergence rate of the numerical solutions when the forcing term in the governing equation is rough (fast varying); alternatively, for the same target accuracy, the generalized Itô correction allows for the use of significantly longer time steps and, hence, helps to reduce the computational cost of the numerical simulation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Estimating and Evaluating Roughness Length and Displacement Height in Heterogeneous Urban Environments

The roughness length (z 0 ) and displacement height (z d ) are essential surface-layer parameters in numerical models (e.g., weather, climate, wall-modeled LES, etc.). This work evaluates the consistency of z 0 and z d estimates from morphometric and anemometric methods using data from two eddy-covariance flux towers (AmeriFlux US-INg and US-INc) in Indianapolis, IN. Results show inconsistencies in estimated z 0 and z d values depending on the chosen method. The two evaluated anemometric methods estimate non-physical values of z d when compared to roughness elements surrounding both towers. Additionally, predictions of mean wind speed using surface-layer similarity theory with morphometric estimates exhibit a bias during near-neutral and stable conditions relative to observations. The overestimation of mean wind speed by surface layer similarity theory is consistent with previous observational and modeling studies in urban areas, suggesting that the application of similarity theories to urban environments may have limitations. Differentiation of vegetation from built structures appears to impact morphometric z 0 and z d estimates, particularly where vegetation is abundant; however, it has little impact on correcting biases in the similarity theory. Specifically, we find that existing similarity theories using morphometric estimates underestimate integral velocity and length scales, and the degree of underestimation depends on the stability conditions. Accounting for the degree of anisotropy in surface-layer turbulence helps reduce the biases between similarity theories and observations during unstable conditions, but not in near-neutral cases. Future work is needed to identify the cause of such biases for near-neutral conditions.

Aerodynamic roughness length↗
DOE OSTI2022

The Effect of Surface Heating Heterogeneity on Boundary Layer Height and Its Dependence on Background Wind Speed

The planetary boundary layer height (PBLH) is a fundamental variable of the planetary boundary layer (PBL). The effect of surface heterogeneity is challenging in the PBL parameterization for numerical weather and climate models. Here we use large eddy simulation data to investigate the impact of surface heating heterogeneity on the PBLH spatial variations and mean values over a domain of typical mesoscale model grid size. It is found that this impact depends on background wind condition. Variance decomposition and Fourier spectra both reveal that for the fully developed sheared convective PBL, surface heterogeneity contributes little to the spatial variation of PBLH, except for the case with heterogeneity scale of 14.4 km. This suggests that surface heterogeneity with length scales less than ~10 km, which is typical for mesoscale modeling, does not induce significant subgrid spatial variation of PBLH. The domain-averaged PBLH is found to generally increase as surface heterogeneity scale decreases, until reaching the scale on the order of PBLH. The findings can be used to inform the parameterization development of PBL processes over heterogeneous surface.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Regime-specific Cloud Vertical Overlap Characteristics from Radar and Lidar Observations at the ARM sites

Climate and numerical weather prediction models require assumptions to represent the vertical distribution of subgrid-scale clouds, which have radiative transfer implications. In this study, nearly 25 years of ground-based radar and lidar observations of vertical cloud profiles at the Atmospheric Radiation Measurement Program (ARM) Southern Great Plains (SGP) site are utilized to derive cloud vertical overlap characteristics from the Cloud Type (CLDTYPE) data product. Here, the cloud vertical overlap characteristics are further separated by cloud regime by considering seven cloud types (i.e., low cloud, congestus, deep convection, altocumulus, altostratus, cirrostratus, and cirrus) as well as periods of shallow cumulus. The decorrelation length scale (i.e., exponential transition from maximum to random overlap with layer separation) is found to vary by cloud regime, ranging between 0.04 km for cirrostratus paired with cirrus to 4.58 km for low cloud paired with cirrus at SGP. Cloud vertical overlap characteristics are also considered for other ARM sites including the Tropical Western Pacific (TWP), North Slope of Alaska (NSA), and Eastern North Atlantic (ENA) sites amongst other shorter term ARM deployments globally. The decorrelation length scale ranged globally from 1.03 km in the Arctic Ocean to 3.06 km in Manacapuru, Brazil. Globally, the decorrelation length scale by cloud regime exhibited similarities (e.g., for cirrus paired with cirrus) and differences (e.g., congestus paired with cirrus). The results could help inform development of cloud vertical overlap assumptions within operational numerical weather prediction models and potentially improve prediction of radiative fluxes for weather, climate, and renewable energy forecasting.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Resolving Mesoscale Convective Systems: Grid Spacing Sensitivity in the Tropics and Midlatitudes

Abstract Mesoscale convective systems (MCSs) are a critical global water cycle component and drive extreme precipitation events in tropical and midlatitude regions. However, simulating deep convection remains challenging for modern numerical weather and climate models due to the complex interactions of processes from microscales to synoptic scales. Recent models with kilometer‐scale horizontal grid spacings offer notable improvements in simulating deep convection compared to coarser‐resolution models. Still, deficiencies in representing key physical processes, such as entrainment, lead to systematic biases. Additionally, evaluating model outputs using process‐oriented observational data remain difficult. This study presents an ensemble of MCS simulations with spanning the deep convective gray zone ( from 12 km to 125 m) in the Southern Great Plains of the U.S. and the Amazon Basin. Comparing these simulations with Atmospheric Radiation Measurement (ARM) wind profiler observations, we find greater sensitivity in the Amazon Basin compared to the Great Plains. Convective drafts converge structurally at sub‐kilometer scales, but some deficiencies remain. In both regions, simulated up and downdrafts are too deep and extreme downdrafts are not strong enough. Furthermore, Amazonian updrafts are too strong. Overall, we observe higher sensitivity in the tropics, including an artificial buildup in vertical kinetic energy at scales of , suggesting a need for 250 m in this region. Nevertheless, bulk convergence—agreement of storm‐average statistics—is achievable with kilometer‐scale simulations within a 10% error margin with 1 km providing a good balance between accuracy and computational cost.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Mesoscale convective clustering enhances tropical precipitation

In the tropics, extreme precipitation events are often caused by mesoscale systems of organized, spatially clustered deep cumulonimbi, posing a substantial risk to life and property. While the clustering of convective clouds has been thought to strengthen precipitation rate, no quantitative estimates of this hypothesized enhancement exist. In this study, after isolating the effects of mesoscale convective clustering on precipitation, we find that strongly clustered oceanic convection precipitates more intensely than weakly clustered convection. We further show that this enhancement is primarily attributable to an increase in convective precipitation rate when the environment is less than 70% saturated, with increases in the size of the rainy stratiform region being of equal or greater importance when the environment is closer to saturation. Our results suggest that a correct representation of mesoscale organized convective systems in numerical weather and climate models is needed for accurate predictions of extreme precipitation events.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

The need to operationalize climate modelling

We report climate models have changed the world. Starting out as simple globally averaged representations of vertical energy exchanges in the atmosphere in the 1950s, today’s climate models are highly complex numerical representations of the Earth system based on the fundamental laws of physics. Their development has largely been driven by scientific curiosity, with the many approximate virtual representations of Earth available today enabling the interrogation of the past and present climate system and the development of an understanding of the influence of human activity on its future. It is this understanding that underpins the climate mitigation targets enshrined in the Paris Agreement to limit global mean temperature increases.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Assessing Global Ocean Circulation Sensitivity to Changes in Antarctic Ice Discharge

The principal goal of this research is to assess how projected increases in meltwater discharge and iceberg calving from the Antarctic Ice Sheet will impact climate in the next 250 years. In short, the sensitivity of the global ocean circulation and climate, and in particular the Atlantic Meridional Overturning Circulation (AMOC), to large increases in iceberg calving and meltwater discharges to the Southern Ocean are poorly understood. The requirement to investigate this topic is heightened by growing evidence that the West Antarctic Ice Sheet (WAIS) is vulnerable to rapid retreat and collapse through marine-ice-sheet-instability (MISI) on multidecadal-to-centennial timescales. Future model simulations of the AIS show the potential for rapid ice sheet retreat in the next 50 – 300 years, with such a collapse associated with the discharge of enormous volumes of ice and meltwater to the Southern Ocean. This project uses a combination of an ice sheet/shelf model and a fully coupled (ocean-atmosphere-seaice) model (CESM 1.2) to explore the sensitive of global climate to future changes in runoff from the Antarctic continent under future greenhouse gas emissions scenarios IPCC RCP4.5 and 8.5. Overall, accounting for Antarctic meltwater reduces the projected global mean anthropogenic greenhouse warming by up to 2 deg C. during peak WAIS collapse and by ~1 deg. for most of the simulation. In addition, the increased meltwater contribution raises sub-surface ocean temperatures at the Antarctic ice sheet margin by more than 1ºC, such that the ice shelf basal melt rates increase beyond those currently projected. In contrast, the model predicts a strong cooling of both the surface air and ocean temperatures over the Southern Ocean that results in a massive expansion and thickening of the perennial sea-ice. The slow-down in anthropogenic warming also results in the onset of ice-free conditions in the Arctic being delayed in the model by several decades, and the projected slowdown in the AMOC to reduce.

58 GEOSCIENCES↗
DOE OSTI2020

Multimodel simulation of vertical gas transfer in a temperate lake

In recent decades, several lake models of varying complexity have been developed and incorporated in numerical weather prediction systems and climate models. To foster enhanced forecasting ability and verification, improvement of these lake models remains essential. This especially applies to the limited simulation capabilities of biogeochemical processes in lakes and greenhouse gas exchanges with the atmosphere. Here we present multi-model simulations of physical variables and dissolved gas dynamics in a temperate lake (Harp Lake, Canada). The five models (ALBM, FLake, LAKE, LAKEoneD, MTCR-1) considered within this most recent round of the Lake Model Intercomparison Project (LakeMIP) all captured the seasonal temperature variability well. In contrast, none of the models is able to reproduce the exact dates of ice-cover and ice-off, leading to considerable errors in the simulation of eddy diffusivity around those dates.We then conducted an additional modeling experiment with a diffusing passive tracer to isolate the effect of the eddy diffusivity on gas concentration. Remarkably, sophisticated k -" models do not demonstrate a significant difference in the vertical diffusion of a passive tracer compared to models with much simpler turbulence closures. All models simulate less intensive spring overturn compared to autumn. Reduced mixing in the models consequently leads to the accumulation of the passive tracer distribution in the water column. The lake models with a comprehensive biogeochemical module, such as ALBM and LAKE, predict dissolved oxygen dynamics adequate to the observed data. However, for the surface carbon dioxide concentration the correlation between modeled (ALBM, LAKE) and observed data is weak (~0.3). Overall our results indicate the need to improve the representation of physical and biogeochemical processes in lake models, thereby contributing to enhanced weather prediction and climate projection capabilities.

Guseva, Sofya↗
DOE OSTI2023

Warm air intrusions reaching the MOSAiC expedition in April 2020—The YOPP targeted observing period (TOP)

In the spring period of the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition, an initiative was in place to increase the radiosounding frequency during warm air intrusions in the Atlantic Arctic sector. Two episodes with increased surface temperatures were captured during April 12–22, 2020, during a targeted observing period (TOP). The large-scale circulation efficiently guided the pulses of warm air into the Arctic and the observed surface temperature increased from -30°C to near melting conditions marking the transition to spring, as the temperatures did not return to values below -20°C. Back-trajectory analysis identifies 3 pathways for the transport. For the first temperature maximum, the circulation guided the airmass over the Atlantic to the northern Norwegian coast and then to the MOSAiC site. The second pathway was from the south, and it passed over the Greenland ice sheet and arrived at the observational site as a warm but dry airmass due to precipitation on the windward side. The third pathway was along the Greenland coast and the arriving airmass was both warm and moist. The back trajectories originating from pressure levels between 700 and 900 hPa line up vertically, which is somewhat surprising in this dynamically active environment. The processes acting along the trajectory originating from 800 hPa at the MOSAIC site are analyzed. Vertical profiles and surface energy exchange are presented to depict the airmass transformation based on ERA5 reanalysis fields. The TOP could be used for model evaluation and Lagrangian model studies to improve the representation of the small-scale physical processes that are important for airmass transformation. A comparison between MOSAiC observations and ERA5 reanalysis demonstrates challenges in the representation of small-scale processes, such as turbulence and the contributions to various terms of the surface energy budget, that are often misrepresented in numerical weather prediction and climate models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Numerically Relevant Timescales in the MG2 Microphysics Model

Climate models rely on parameterizations of a variety of processes in the atmospheric physics, but a common concern is that the temporal resolution is too coarse to consistently resolve the behavior that individual parameterizations are designed to capture. This study examines timescales numerically derived from the Morrison-Gettelman (MG2) microphysics as implemented within the Energy Exascale Earth System Model, version 1 (E3SMv1). Numerically relevant timescales in MG2 are derived by computing the eigenspectrum of its Jacobian. These timescales are found to often be smaller than the default 5 min time step used for MG2. The fast timescales are then heuristically connected to individual microphysics processes. By substepping a few particular rain processes within MG2, the time discretization error for those processes was considerably reduced with minimal additional expense to the overall microphysics. While this improvement has a substantial effect on the target processes and on the vertical distribution of stratiform-derived rain within E3SMv1, the overall model climate is found to not be sensitive to MG2 time step. Here, we hypothesize that this is because the surface climate does not depend strongly on certain process rates, especially MG2's rain evaporation rate.

58 GEOSCIENCES↗
DOE OSTI2022

A Package of Momentum and Heat Transfer Coefficients for the Stable Surface Layer Extended by New Coefficients over Sea Ice

The bulk transfer coefficients of momentum, heat, and humidity belong to the main ingredients of numerical weather prediction and climate models. They are needed for the calculation of turbulent fluxes in the surface layer and often rely on the Monin–Obukhov similarity theory requiring universal stability functions. The problem of a derivation of transfer coefficients based on different stability functions has been considered by many researchers over the years but it remains to this day. In this work, dedicated to the memory of S.S. Zilitinkevich, we also address this task, and obtain transfer coefficients from three pairs of theoretically derived stability functions suggested by Zilitinkevich and co-authors for stable conditions. Additionally, we construct non-iterative parametrizations of these transfer coefficients based on earlier work. Results are compared with state-of-the-art coefficients for land, ocean, and sea ice. The combined parametrizations form a package in a universal framework relying on a semi-analytical solution of the Monin-Obukhov similarity theory equations. A comparison with data of the Surface Heat Budget of the Arctic Ocean campaign (SHEBA) over sea ice reveals large differences between the coefficients for land conditions and the measurements over sea ice. However, two schemes of Zilitinkevich and co-authors show, after slight modification, good agreement with SHEBA although they had not been especially developed for sea ice. One pair of the modified transfer coefficients is superior and is compatible to earlier SHEBA-based parametrizations. Finally, an algorithm for practical use of all transfer coefficients in climate models is given.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

The COMBLE campaign: a study of marine boundary-layer clouds in Arctic cold-air outbreaks

One of the most intense air mass transformations on Earth happens when cold air flows from frozen surfaces to much warmer open water in cold-air outbreaks (CAOs), a process captured beautifully in satellite imagery. Despite the ubiquity of the CAO cloud regime over high-latitude oceans, we have a rather poor understanding of its properties, its role in energy and water cycles, and its treatment in weather and climate models. The Cold-air Outbreaks in the Marine Boundary Layer Experiment (COMBLE) was conducted to better understand this regime and its representation in models. COMBLE aimed to examine the relations between surface fluxes, boundary-layer structure, aerosol, cloud and precipitation properties, and mesoscale circulations in marine CAOs. Processes affecting these properties largely fall in a range of scales where boundary-layer processes, convection, and precipitation are tightly coupled, which makes accurate representation of the CAO cloud regime in numerical weather prediction and global climate models most challenging. COMBLE deployed an Atmospheric Radiation Measurement Mobile Facility at a coastal site in northern Scandinavia (69°N), with additional instruments on Bear Island (75°N), from December 2019 to May 2020. CAO conditions were experienced 19% (21%) of the time at the main site (on Bear Island). A comprehensive suite of continuous in situ and remote sensing observations of atmospheric conditions, clouds, precipitation, and aerosol were collected. Because of the clouds’ well-defined origin, their shallow depth, and the broad range of observed temperature and aerosol concentrations, the COMBLE dataset provides a powerful modeling test bed for improving the representation of mixed-phase cloud processes in large-eddy simulations and large-scale models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

A new process-based and scale-aware desert dust emission scheme for global climate models – Part I: Description and evaluation against inverse modeling emissions

Desert dust accounts for most of the atmosphere's aerosol burden by mass and produces numerous important impacts on the Earth system. However, current global climate models (GCMs) and land-surface models (LSMs) struggle to accurately represent key dust emission processes, in part because of inadequate representations of soil particle sizes that affect the dust emission threshold, surface roughness elements that absorb wind momentum, and boundary-layer characteristics that control wind fluctuations. Furthermore, because dust emission is driven by small-scale (~ 1 km or smaller) processes, simulating the global cycle of desert dust in GCMs with coarse horizontal resolutions (~ 100 km) presents a fundamental challenge. This representation problem is exacerbated by dust emission fluxes scaling nonlinearly with wind speed above a threshold wind speed that is sensitive to land-surface characteristics. Here, we address these fundamental problems underlying the simulation of dust emissions in GCMs and LSMs by developing improved descriptions of (1) the effect of soil texture on the dust emission threshold, (2) the effects of nonerodible roughness elements (both rocks and green vegetation) on the surface wind stress, and (3) the effects of boundary-layer turbulence on driving intermittent dust emissions. We then use the resulting revised dust emission parameterization to simulate global dust emissions in a standalone model forced by reanalysis meteorology and land-surface fields. We further propose (4) a simple methodology to rescale lower-resolution dust emission simulations to match the spatial variability of higher-resolution emission simulations in GCMs. The resulting dust emission simulation shows substantially improved agreement against regional dust emissions observationally constrained by inverse modeling. We thus find that our revised dust emission parameterization can substantially improve dust emission simulations in GCMs and LSMs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Improving the representation of isopycnal mixing in E3SM (Final Report)

The DOE-supported Energy Exascale Earth System Model (E3SM) is a major attempt by the Department of Energy to develop a new Earth System Model using unstructured grids, which allow for the model to concentrate resolution where it is most needed and avoid numerical artifacts experienced by previous Earth System Models (ESMs) using regular grids in which the lateral resolution becomes extremely fine as the resolution shrinks at the poles. This effort required rewriting many of the algorithms previously developed for regular grids. One algorithm that was problematic in the first version of E3SM was the representation of mixing due to turbulent ocean eddies with scales smaller than the model grid. These mesoscale eddies are the primary way by which tracers are stirred along density surfaces in the ocean interior. In particular, the process of isopycnal mixing exchanges fresher, more oxygenated waters from polar regions with saltier, nutrient-rich and oxygen poor waters from tropical regions. Previous work in our group has shown that this mechanism is vitally important for bringing oxygen into poorly ventilated tropical regions (Gnanadesikan et al., 2012, 2013) and plays a significant role in determining the uptake of anthropogenic carbon dioxide (Gnanadesikan et al., 2015). However, in E3SMv1 this process was turned off, as turning it on caused the model to become unstable. Additionally, the rate of isopycnal mixing is directly proportional to a mixing coefficient $A_{Redi}$ whose value varies from less than 400 m 2 /s to 2000 m 2 /s across contemporary climate models. The main thrusts of this proposal therefore were to: 1.) Improve the numerics of isopycnal mixing in E3SM; 2.) Identify ways in which climate models are sensitive to the isopycnal mixing coefficient; and 3.) Develop better representations of the isopycnal mixing coefficient.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Persistent urban heat

Urban surface and near-surface air temperatures are known to be often higher than their rural counterparts, a phenomenon now labeled as the urban heat island effect. However, whether the elevated urban temperatures are more persistent than rural temperatures at timescales commensurate to heat waves has not been addressed despite its importance for human health. Combining numerical simulations by a global climate model with a surface energy balance theory, it is demonstrated here that urban surface and near-surface air temperatures are significantly more persistent than their rural counterparts in cities dominated by impervious materials with large thermal inertia. Further use of these materials will result in even stronger urban temperature persistence, especially for tropical cities. The present findings help pinpoint mitigation strategies that can simultaneously ameliorate the larger magnitude and stronger persistence of urban temperatures.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Understanding Processes Controlling the Temporal and Spatial Variations of PBL Structures Over the ARM SGP Site

The surface heat, moisture, and momentum fluxes are transferred to the atmosphere above through the planetary boundary layer (PBL), where vertical mixing due to turbulent eddies of different sizes plays critical roles. Therefore, reliably representing PBL processes in numerical models is critical for weather, climate, and air quality prediction. Currently, there are over ten PBL schemes that are selectable within the advanced research version of the Weather Research and Forecasting (WRF) model, indicative of the challenges in capturing the impacts of turbulence within the PBL in models. Further improvements in PBL parameterizations are needed for both weather and climate models, as emphasized in many recent national reports, but require an advanced understanding of the underlying boundary layer processes from observations. This project takes advantage of Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) investments in the atmospheric boundary layer observations and Large-Eddy Simulation (LES) ARM Symbiotic Simulation and Observation (LASSO) simulations to characterize PBL structures, understand key physical processes controlling the mixed layer development, and to evaluate PBL parameterization.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

CondiDiag1.0: a flexible online diagnostic tool for conditional sampling and budget analysis in the E3SM atmosphere model (EAM)

Abstract. Numerical models used in weather and climate prediction take into account a comprehensive set of atmospheric processes (i.e., phenomena) such as the resolved and unresolved fluid dynamics, radiative transfer, cloud and aerosol life cycles, and mass or energy exchanges with the Earth's surface. In order to identify model deficiencies and improve predictive skills, it is important to obtain process-level understanding of the interactions between different processes. Conditional sampling and budget analysis are powerful tools for process-oriented model evaluation, but they often require tedious ad hoc coding and large amounts of instantaneous model output, resulting in inefficient use of human and computing resources. This paper presents an online diagnostic tool that addresses this challenge by monitoring model variables in a generic manner as they evolve within the time integration cycle. The tool is convenient to use. It allows users to select sampling conditions and specify monitored variables at run time. Both the evolving values of the model variables and their increments caused by different atmospheric processes can be monitored and archived. Online calculation of vertical integrals is also supported. Multiple sampling conditions can be monitored in a single simulation in combination with unconditional sampling. The paper explains in detail the design and implementation of the tool in the Energy Exascale Earth System Model (E3SM) version 1. The usage is demonstrated through three examples: a global budget analysis of dust aerosol mass concentration, a composite analysis of sea salt emission and its dependency on surface wind speed, and a conditionally sampled relative humidity budget. The tool is expected to be easily portable to closely related atmospheric models that use the same or similar data structures and time integration methods.

58 GEOSCIENCES↗