Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “narrow linewidth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Massively distributed fiber strain sensing using Brillouin lasing

Brillouin based distributed fiber sensors present a unique set of characteristics amongst fiber sensing architectures. They are able to measure absolute strain and temperature over long distances, with high spatial resolution, and very large dynamic range in off-the-shelf fiber. However, Brillouin sensors traditionally provide only modest sensitivity due to the weak dependence of the Brillouin frequency on strain and the high signal to noise ratio required to identify the resonance’s peak frequency to within a small fraction of its linewidth. Recently, we introduced a technique which substantially improves the precision of Brillouin fiber sensors by exciting a series of lasing modes in a fiber loop cavity that experience Brillouin amplification at discrete locations in the fiber. The narrow-linewidth and high intensity of the lasing modes enabled ultra-low noise Brillouin sensors with large dynamic range. However, our initial demonstration was only modestly distributed: measuring strain at 40, non-contiguous positions along a 400 m fiber. In this work, we greatly extend this methodology to enable fully distributed sensing at 1000 contiguous locations along 3.5 km of fiber—an order of magnitude increase in sensor count and range. This highly-multiplexed Brillouin fiber laser sensor provides a strain noise as low as 34 nɛ/√Hz and we analyze the limiting factors in this approach.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Defects of perovskite semiconductor CsPbBr3 investigated via photoluminescence and thermally stimulated current spectroscopies

Halide perovskites are essential materials for hard radiation detectors at ambient temperature. To improve detector performance, charge transport must be investigated and optimized. Using photoluminescence (PL) and thermally stimulated current (TSC) spectroscopies, we investigate photogenerated charge carriers in Bridgman-grown CsPbBr3 single crystals to understand the nature of charge transport. PL spectroscopy of these halide perovskites revealed the presence of strong emission bands at the band edge, which were attributed to free or bound excitons. It is shown that a wide broadening of the excitonic linewidth in these halide perovskites arises from strong exciton–phonon coupling, which is substantially dominated by longitudinal optical phonons via Fröhlich interaction. An additional contribution due to the presence of ionized impurities was also observed. Crystals with a detectable sensitivity to high-energy gamma radiation are characterized by a higher intensity and a narrower linewidth of the principal PL peak at 2.326 eV. Defect states beyond 2.214 eV have a negative impact on detector sensitivity to high-energy gamma radiation. TSC spectroscopy reveals an array of trap levels spanning 0.15–0.70 eV, attributed to intrinsic point defects and multiple extrinsic defects involving dopants or impurities. Defects identified included Cs and Br vacancies, as well as Pb interstitials with concentrations in the 1011–1016 cm−3 range. Understanding how the synthesis process impacts the types and concentrations of the defects present is currently under investigation. Elimination or suppression of the defect/trap states should result in halide perovskite materials with longer carrier diffusion lengths and improved detector characteristics.

Physics↗
DOE OSTI2024

In situ electric-field control of ferromagnetic resonance in the low-loss organic-based ferrimagnet V[TCNE] x ∼2

We demonstrate indirect electric-field control of ferromagnetic resonance (FMR) in devices that integrate the low-loss, molecule-based, room-temperature ferrimagnet vanadium tetracyanoethylene (V[TCNE]x∼2) mechanically coupled to PMN-PT piezoelectric transducers. Upon straining the V[TCNE]x films, the FMR frequency is tuned by more than 6 times the resonant linewidth with no change in Gilbert damping for samples with α = 6.5 × 10−5. We show this tuning effect is due to a strain-dependent magnetic anisotropy in the films and find the magnetoelastic coefficient |λs| ∼ (1–4.4) ppm, backed by theoretical predictions from density-functional theory calculations and magnetoelastic theory. Noting the rapidly expanding application space for strain-tuned FMR, we define a new metric for magnetostrictive materials, magnetostrictive agility, given by the ratio of the magnetoelastic coefficient to the FMR linewidth. This agility allows for a direct comparison between magnetostrictive materials in terms of their comparative efficacy for magnetoelectric applications requiring ultra-low loss magnetic resonance modulated by strain. With this metric, we show V[TCNE]x is competitive with other magnetostrictive materials, including YIG and Terfenol-D. This combination of ultra-narrow linewidth and magnetostriction, in a system that can be directly integrated into functional devices without requiring heterogeneous integration in a thin film geometry, promises unprecedented functionality for electric-field tuned microwave devices ranging from low-power, compact filters and circulators to emerging applications in quantum information science and technology.

Materials Science↗
DOE OSTI2023

Spectral narrowing and broadening of Cr:ZnS/Se laser oscillation due to mode competition and spatial hole burning in the gain element

In this paper, we demonstrate the laser characterization of Cr:ZnS/Se polycrystalline gain media in non-selective unpolarized, linearly polarized, and twisted mode cavities. Lasers were based on post-growth diffusion-doped, commercially available antireflective-coated Cr:ZnSe and Cr:ZnS polycrystals with a length of 9 mm. The spectral output of lasers based on these gain elements in non-selective unpolarized and linearly polarized cavities was measured to be broadened to ∼20-50 nm due to the spatial hole burning (SHB) effect. SHB alleviation in the same crystals was realized in the “twisted mode” cavity, with linewidth narrowing to ∼80-90 pm. Both broadened and narrow-line oscillations were captured by adjusting the orientation of intracavity waveplates with respect to facilitated polarization.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Laser cooling of antihydrogen atoms

The photon—the quantum excitation of the electromagnetic field—is massless but carries momentum. A photon can therefore exert a force on an object upon collision 1 . Slowing the translational motion of atoms and ions by application of such a force 2,3 , known as laser cooling, was first demonstrated 40 years ago 4,5 . It revolutionized atomic physics over the following decades 6–8 , and it is now a workhorse in many fields, including studies on quantum degenerate gases, quantum information, atomic clocks and tests of fundamental physics. However, this technique has not yet been applied to antimatter. Here we demonstrate laser cooling of antihydrogen 9 , the antimatter atom consisting of an antiproton and a positron. By exciting the 1S–2P transition in antihydrogen with pulsed, narrow-linewidth, Lyman-α laser radiation 10,11 , we Doppler-cool a sample of magnetically trapped antihydrogen. Although we apply laser cooling in only one dimension, the trap couples the longitudinal and transverse motions of the anti-atoms, leading to cooling in all three dimensions. We observe a reduction in the median transverse energy by more than an order of magnitude—with a substantial fraction of the anti-atoms attaining submicroelectronvolt transverse kinetic energies. We also report the observation of the laser-driven 1S–2S transition in samples of laser-cooled antihydrogen atoms. The observed spectral line is approximately four times narrower than that obtained without laser cooling. The demonstration of laser cooling and its immediate application has far-reaching implications for antimatter studies. A more localized, denser and colder sample of antihydrogen will drastically improve spectroscopic 11–13 and gravitational 14 studies of antihydrogen in ongoing experiments. Furthermore, the demonstrated ability to manipulate the motion of antimatter atoms by laser light will potentially provide ground-breaking opportunities for future experiments, such as anti-atomic fountains, anti-atom interferometry and the creation of antimatter molecules.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Nonequilibrium Lattice Dynamics in Photoexcited 2D Perovskites

Abstract Interplay between structural and photophysical properties of metal halide perovskites is critical to their utility in optoelectronics, but there is limited understanding of lattice response upon photoexcitation. Here, 2D perovskites butylammonium lead iodide, (BA) 2 PbI 4 , and phenethylammonium lead iodide, (PEA) 2 PbI 4 , are investigated using ultrafast transient X‐ray diffraction as a function of optical excitation fluence to discern structural dynamics. Both powder X‐ray diffraction and time‐resolved photoluminescence linewidths narrow over 1 ns following optical excitation for the fluence range studied, concurrent with slight redshifting of the optical bandgaps. These observations are attributed to transient relaxation and ordering of distorted lead iodide octahedra stimulated mainly by electron–hole pair creation. The c axis expands up to 0.37% over hundreds of picoseconds; reflections sampling the a and b axes undergo one tenth of this expansion with the same timescale. Post‐photoexcitation appearance of the (110) reflection in (BA) 2 PbI 4 would suggest a transient phase transition, however, through new single‐crystal XRD, reflections are found that violate glide plane conditions in the reported Pbca structure. The static structure space group is reassigned as P 2 1 2 1 2 1 . With this, a nonequilibrium phase transition is ruled out. These findings offer increased understanding of remarkable lattice response in 2D perovskites upon excitation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Sub‐Diffraction Correlation of Quantum Emitters and Local Strain Fields in Strain‐Engineered WSe 2 Monolayers

Strain-engineering in atomically thin metal dichalcogenides is a useful method for realizing single-photon emitters (SPEs) for quantum technologies. Correlating SPE position with local strain topography is challenging due to localization inaccuracies from the diffraction limit. Currently, SPEs are assumed to be positioned at the highest strained location and are typically identified by randomly screening narrow-linewidth emitters, of which only a few are spectrally pure. In this work, hyperspectral quantum emitter localization microscopy is used to locate 33 SPEs in nanoparticle-strained WSe 2 monolayers with sub-diffraction-limit resolution (≈30 nm) and correlate their positions with the underlying strain field via image registration. In this system, spectrally pure emitters are not concentrated at the highest strain location due to spectral contamination; instead, isolable SPEs are distributed away from points of peak strain with an average displacement of 240 nm. These observations point toward a need for a change in the design rules for strain-engineered SPEs and constitute a key step toward realizing next-generation quantum optical architectures.

2D material↗
DOE OSTI2022

Narrowing the Phase Distribution of Quasi-2D Perovskites for Stable Deep-Blue Electroluminescence

Solution-processed quasi-2D perovskites contain multiple quantum wells with a broad width distribution. Inhomogeneity results in the charge funneling into the smallest bandgap components, which hinders deep-blue emission and accelerates Auger recombination. Here, a synthetic strategy applied to a range of quasi-2D perovskite systems is reported, that significantly narrows the quantum well dispersity. It is shown that the phase distribution in the perovskite film is significantly narrowed with controlled, simultaneous evaporation of solvent and antisolvent. Modulation of film formation kinetics of quasi-2D perovskite enables stable deep-blue electroluminescence with a peak emission wavelength of 466 nm and a narrow linewidth of 14 nm. Light emitting diodes using the perovskite film show a maximum luminance of 280 cd m –2 at an external quantum efficiency of 0.1%. This synthetic approach will serve in producing new materials widening the color gamut of next-generation displays.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Strong Photon‐Magnon Coupling Using a Lithographically Defined Organic Ferrimagnet

Abstract A cavity‐magnonic system composed of a superconducting microwave resonator coupled to a magnon mode hosted by the organic‐based ferrimagnet vanadium tetracyanoethylene (V[TCNE] x ) is demonstrated. This work is motivated by the challenge of scalably integrating a low‐damping magnetic system with planar superconducting circuits. V[TCNE] x has ultra‐low intrinsic damping, can be grown at low processing temperatures on arbitrary substrates, and can be patterned via electron beam lithography. The devices operate in the strong coupling regime, with a cooperativity exceeding 1000 for coupling between the Kittel mode and the resonator mode at T≈0.4 K, suitable for scalable quantum circuit integration. Higher‐order magnon modes are also observed with much narrower linewidths than the Kittel mode. This work paves the way for high‐cooperativity hybrid quantum devices in which magnonic circuits can be designed and fabricated as easily as electrical wires.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

A Chip-Scale Oscillation-Mode Optomechanical Inertial Sensor Near the Thermodynamical Limits

Modern navigation systems integrate the global positioning system (GPS) with an inertial navigation system (INS), which complement each other for correct attitude and velocity determination. Here, the core of the INS integrates accelerometers and gyroscopes used to measure forces and angular rate in the vehicular inertial reference frame. With the help of gyroscopes and by integrating the acceleration to compute velocity and distance, precision and compact accelerometers with sufficient accuracy can provide small–error location determination. Solid–state implementations, through coherent readout, can provide a platform for high performance acceleration detection. In contrast to prior accelerometers using piezoelectric or capacitive readout techniques, optical readout provides narrow–linewidth high–sensitivity laser detection along with low–noise resonant optomechanical transduction near the thermodynamical limits. Here an optomechanical inertial sensor with an 8.2 µg Hz –1/2 velocity random walk (VRW) at an acquisition rate of 100 Hz and 50.9 µg bias instability is demonstrated, suitable for applications, such as, inertial navigation, inclination sensing, platform stabilization, and/or wearable device motion detection. Driven into optomechanical sustained–oscillation, the slot photonic crystal cavity provides radio–frequency readout of the optically–driven transduction with an enhanced 625 µg Hz –1 sensitivity. Measuring the optomechanically–stiffened oscillation shift, instead of the optical transmission shift, provides a 220× VRW enhancement over pre–oscillation mode detection.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Ultra‐Low‐Loss Silicon Nitride Photonics Based on Deposited Films Compatible with Foundries

Abstract The fabrication processes of silicon nitride (Si 3 N 4 ) photonic devices used in foundries require low temperature deposition, which typically leads to high propagation losses. Here, it is shown that propagation loss as low as 0.42 dB cm −1 can be achieved using foundry compatible processes by solely reducing waveguide surface roughness. By postprocessing the fabricated devices using rapid thermal anneal (RTA) and furnace anneal, propagation losses down to 0.28 dB cm −1 and 0.06 dB cm −1 , respectively, are achieved. These low losses are comparable to the conventional devices using high temperature, high‐stress LPCVD films. The dispersion of the devices is also tuned, and it is proved that these devices can be used for linear and nonlinear applications. Low threshold parametric oscillation, broadband frequency combs, and narrow‐linewidth laser are demonstrated. This work demonstrates the feasibility of scalable photonic systems based on foundries.

Ji, Xingchen↗
DOE OSTI2025

Omni‐Resonant Imaging Across the Visible

Resonant field enhancement in optical cavities is provided over only narrow linewidths and for specific spatial modes. Consequently, spectrally restrictive planar Fabry-Pérot cavities have not contributed to date to white-light imaging, which necessitates a highly multimoded broadband field to satisfy the resonance condition. It is shown that introducing judicious angular-dispersion circumvents the fundamental trade-off between cavity linewidth and finesse in a Fabry-Pérot cavity by exciting a 130-nm-bandwidth achromatic resonance across the visible spectrum, which far exceeds the finesse-limited linewidth (0.5 nm), and even exceeds the free spectral range (45 nm). This omni-resonant configuration enables broadband color-imaging over a 100-nm-bandwidth in the visible with minimal spherical and chromatic aberrations. Omni-resonant imaging is demonstrated using coherent and incoherent light, and spatially extended and localized fields comprising stationary and moving objects. This work paves the way to harnessing broadband resonant enhancements for spatially structured fields, as needed for example in solar windows.

42 ENGINEERING↗
DOE OSTI2025

Lines of Bound States in the Continuum in Monodisperse Microsphere Structures

Incorporating epitaxially grown active semiconductor media into self-assembled microsphere crystals has remained a major challenge as the curved geometry of the spheres is incompatible with conventional planar growth and patterning techniques. As a result, active photonic devices based on such self-assembled structures, which have other desirable properties such as enabling the rapid assembly of large area systems, have been elusive. Here, we numerically demonstrate an alternative route to creating high-Q resonances in microsphere-based nanophotonic assemblies compatible with standard optical gain materials. We show that close-packed layers of monodisperse microspheres can exhibit symmetry bandgaps, regardless of their layer stacking order. Thus, this microsphere environment can be used to create lines of bound states in the continuum (BICs) of an embedded slab made of active material. Using a realistic ZnS@SiO 2 (core-shell) architecture and sphere diameters compatible with scalable colloidal assembly, we predict sharp spectral features in angle-resolved transmission that trace these lines of BICs and persist in the presence of some fabrication disorder. Altogether, in enabling the integration of unpatterned epitaxial gain slabs with large-area colloidal microsphere assemblies, this approach opens a practical path toward active, dynamically reconfigurable photonic devices that leverage BIC physics for narrow-linewidth lasing and enhanced light–matter interactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Calibration-free analysis of Li isotope ratios using laser ablation and laser absorption spectroscopy

We introduce a rapid, calibration-free, all-optical method for high-precision lithium isotope ratio measurements in solid materials using laser ablation combined with tunable laser absorption spectroscopy. A new asynchronous acquisition method is used to acquire time-resolved, high-resolution spectra of the 6Li and 7Li D1 and D2 transitions near 671 nm. Isotope ratios and atomic column densities are extracted from measured spectra via a physics-based fitting model including hyperfine structure. Under 1 Torr air, spectra recorded = 0.75 ms after plasma onset exhibit narrow linewidths corresponding to Doppler temperatures = 400 K, enabling resolution of the isotope peaks with high signal-to-noise ratios. Analysis of LiAlO2 samples with varying 6Li:7Li ratios demonstrates isotopic precisions of 0.6–1.7% for spectra acquired in 30 s. Isotope ratios determined from the spectral fits show accuracy within –0.3% to –1.7% of reference ICP-MS measurements without requiring calibration to external standards. By eliminating sample preparation and enabling spatially resolved isotopic mapping, this method offers a rapid analysis approach to lithium isotope determination in solid materials relevant to nuclear energy, safeguards, and geochemistry.

Phillips, Mark C.↗
DOE OSTI2025

Strontium Tris(cyclopentadienyl) Complexes: Isostructural f0/d0 Analogues of Divalent Lanthanides

Isostructural, diamagnetic diluents are commonly used in magnetic investigations to eliminate interactions between neighboring electron spins. For divalent lanthanides, these diluents are currently limited to closed-shell ytterbium(II) complexes; ytterbium(II), however, is a poor size-match for the large early- and mid-lanthanides, precluding access to certain ligand frameworks. To aid in the study of lanthanide(II) complexes with unconventional electronic structures and magnetic properties, three strontium tris-cyclopentadienyl complexes, [K(2.2.2-cryptand)][SrCpR3], with common substituted cyclopentadienyl ligands, CpR = C5Me4H (Cptet), C5H4(SiMe3) (Cp'), and C5H3(SiMe3)2 (Cp″) were synthesized, characterized, and examined as diamagnetic diluents. En route to their synthesis, two new Sr metallocenes, [SrCpR2] CpR = Cptet, Cp', were also prepared. [K(2.2.2-cryptand)][SrCptet3] was used to dilute the new complex [K(2.2.2-cryptand)][EuIICptet3], and the EPR spectra of the diluted material shows narrower linewidths than those of pure [K(2.2.2-cryptand)][EuIICptet3], suggesting an increase in the spin-spin relaxation time that enables determination of the europium hyperfine coupling constant.

Zlotnikov, Samuel B↗
DOE OSTI2021

The role of chalcogen vacancies for atomic defect emission in MoS 2

For two-dimensional (2D) layered semiconductors, control over atomic defects and understanding of their electronic and optical functionality represent major challenges towards developing a mature semiconductor technology using such materials. Here, we correlate generation, optical spectroscopy, atomic resolution imaging, and ab initio theory of chalcogen vacancies in monolayer MoS 2 . Chalcogen vacancies are selectively generated by in-vacuo annealing, but also focused ion beam exposure. The defect generation rate, atomic imaging and the optical signatures support this claim. We discriminate the narrow linewidth photoluminescence signatures of vacancies, resulting predominantly from localized defect orbitals, from broad luminescence features in the same spectral range, resulting from adsorbates. Vacancies can be patterned with a precision below 10 nm by ion beams, show single photon emission, and open the possibility for advanced defect engineering of 2D semiconductors at the ultimate scale.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Ultranarrow bright single-photon emitters in diamond with strong broadband phonon decoupling

Single-photon emitters are fundamental building blocks for quantum information processing, communication and sensing. However, unwanted interactions with bulk phonons in their host environment strongly limit their coherence and controllability. We report single color centers in nanodiamonds that are strongly and comprehensively decoupled from the bulk phononic environment. The color centers feature record-narrow linewidths down to 0.3 nm at room temperature and stable, bright emission, exceeding 10 Mcps in saturation. Notably, the bulk phonon sideband is almost entirely suppressed, revealing the presence of a single localized vibrational mode outside the diamond phonon band. Our observations and simulations point towards a unique mechanism for phonon decoupling in common wide-gap materials, based on a strongly radiative orbital transition coupled to a localized vibrational mode. The new color center enables qualitatively higher performance for applications in quantum networks and nanoscale sensing, and the exploration of new physical resources associated with vibrational states.

Sahoo, Swetapadma [ORNL]↗
DOE OSTI2021

Moiré trions in MoSe 2 /WSe 2 heterobilayers

Transition metal dichalcogenide moiré bilayers with spatially periodic potentials have emerged as a highly tunable platform for studying both electronic and excitonic phenomena. The power of these systems lies in the combination of strong Coulomb interactions with the capability of controlling the charge number in a moiré potential trap. Electronically, exotic charge orders at both integer and fractional fillings have been discovered. However, the impact of charging effects on excitons trapped in moiré potentials is poorly understood. Here, we report the observation of moiré trions and their doping-dependent photoluminescence polarization in H-stacked MoSe 2 /WSe 2 heterobilayers. We find that as moiré traps are filled with either electrons or holes, new sets of interlayer exciton photoluminescence peaks with narrow linewidths emerge about 7 meV below the energy of the neutral moiré excitons. Circularly polarized photoluminescence reveals switching from co-circular to cross-circular polarizations as moiré excitons go from being negatively charged and neutral to positively charged. Furthermore, this switching results from the competition between valley-flip and spin-flip energy relaxation pathways of photo-excited electrons during interlayer trion formation. Our results offer a starting point for engineering both bosonic and fermionic many-body effects based on moiré excitons.

36 MATERIALS SCIENCE↗