Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multispectral imaging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Analysis of lithology: Vegetation mixes in multispectral images

Discrimination and identification of lithologies from multispectral images is discussed. Rock/soil identification can be facilitated by removing the component of the signal in the images that is contributed by the vegetation. Mixing models were developed to predict the spectra of combinations of pure end members, and those models were refined using laboratory measurements of real mixtures. Models in use include a simple linear (checkerboard) mix, granular mixing, semi-transparent coatings, and combinations of the above. The use of interactive computer techniques that allow quick comparison of the spectrum of a pixel stack (in a multiband set) with laboratory spectra is discussed.

Adams, J. B.↗

Pre-Processor for Compression of Multispectral Image Data

A computer program that preprocesses multispectral image data has been developed to provide the Mars Exploration Rover (MER) mission with a means of exploiting the additional correlation present in such data without appreciably increasing the complexity of compressing the data.

Klimesh, Matthew↗

Mariner 10 multispectral images of the eastern limb and farside of the moon

We present the first analysis of Mariner 10 multispectral image data for the eastern limb and farside of the moon. A new, rigorous calibration of these data is used that provides results that are consistent with independently derived data sets. From these newly calibrated data, a color ratio image (0.48/0.58 micron) is produced to show relative TiO2 abundances in mare units on the eastern limb and farside of the moon. Our results indicate that the farside lunar mare deposits examined have TiO2 contents that are intermediate to low (2.5 pct TiO2) relative to mare deposits on the nearside. We find no evidence for areally extensive deposits of either very low titanium or high to very high titanium basalts in these portions of the moon. Our findings support previous interpretations that the source regions for lunar mare basalts are laterally heterogeneous. Additionally, examination of highland units reveals a relatively blue region that corresponds with a previously proposed cryptomare, suggesting enhanced TiO2 for this unit. Finally, based on these Mariner 10 data, telescopic spectral data, Galileo multispectral image data, and lunar meteorite analyses we speculate that volcanism in farside mare deposits did not include high titanium basalts.

Robinson, Mark S.↗

Acousto-optic tunable filter multispectral imaging system

This paper discusses recent activities of Jet Propulsion Laboratory in the development of a new type of remote sensing multispectral imaging instruments using acousto-optic tunable filter (AOTF) as programmable bandpass filter. This remote sensor provides real-time operation; observational flexibility; measurements of spectral, spatial, and polarization information using a single instrument; and compact, solid state structure without moving parts. Two microcomputer-controlled AOTF imaging spectrometer breadboard systems were designed and built. One operates in the wavelength range of 0.48-0.76 micron and the other in the range of 1.2-2.5 micron. Experiments were performed using these two systems to observe geological and botanical objects in laboratory and outdoor environment. Results have demonstrated the feasibility of using the AOTF multispectral imaging system as a real-time versatile remote sensor with operational flexibility for future Army tactical applications.

Cheng, Li-Jen↗

Survey of multispectral imaging systems for earth observations

Fifty-six multispectral imaging systems are described in terms of their instantaneous fields of view, spectral bands, fields of view, and number of quantization levels. These systems have been used during the past decade for earth resources studies from aircraft or spacecraft, or are currently in the proposal or design and development stage.

Slater, P. N.↗

High speed lookup table approach to radiometric calibration of multispectral image data

A concept for performing radiometric correction of multispectral image data onboard a spacecraft at very high data rates is presented and demonstrated. This concept utilized a lookup table approach, implemented in hardware, to convert the raw sensor data into the desired corrected output data. The digital lookup table memory was interfaced to a microprocessor to allow the data correction function to be completely programmable. Sensor data was processed with this approach at rates equal to the access time of the lookup table memory. This concept offers flexible high speed data processing for a wide range of applications and will benefit from the continuing improvements in performance of digital memories.

Kelly, W. L., IV↗

Multispectral image dissector camera flight test

It was demonstrated that the multispectral image dissector camera is able to provide composite pictures of the earth surface from high altitude overflights. An electronic deflection feature was used to inject the gyro error signal into the camera for correction of aircraft motion.

Johnson, B. L.↗

Extraction and classification of objects in multispectral images

Presented here is an algorithm that partitions a digitized multispectral image into parts that correspond to objects in the scene being sensed. The algorithm partitions an image into successively smaller rectangles and produces a partition that tends to minimize a criterion function. Supervised and unsupervised classification techniques can be applied to partitioned images. This partition-then-classify approach is used to process images sensed from aircraft and the ERTS-1 satellite, and the method is shown to give relatively accurate results in classifying agricultural areas and extracting urban areas.

Robertson, T. V.↗

Short summary of multispectral imaging systems

This paper summarizes a survey of over 40 multispectral imaging systems that have been used during the past decade for earth resources studies from aircraft or spacecraft, or are presently in the proposal or design and development stage. In addition, some short wave infrared systems are described including a recent NASA suggestion for a research remote sensing system for the 1990's.

Slater, P. N.↗

Morphological Feature Extraction for Automatic Registration of Multispectral Images

The task of image registration can be divided into two major components, i.e., the extraction of control points or features from images, and the search among the extracted features for the matching pairs that represent the same feature in the images to be matched. Manual extraction of control features can be subjective and extremely time consuming, and often results in few usable points. On the other hand, automated feature extraction allows using invariant target features such as edges, corners, and line intersections as relevant landmarks for registration purposes. In this paper, we present an extension of a recently developed morphological approach for automatic extraction of landmark chips and corresponding windows in a fully unsupervised manner for the registration of multispectral images. Once a set of chip-window pairs is obtained, a (hierarchical) robust feature matching procedure, based on a multiresolution overcomplete wavelet decomposition scheme, is used for registration purposes. The proposed method is validated on a pair of remotely sensed scenes acquired by the Advanced Land Imager (ALI) multispectral instrument and the Hyperion hyperspectral instrument aboard NASA's Earth Observing-1 satellite.

Plaza, Antonio↗

Multispectral imaging of the lunar regolith core samples - Preliminary results for 74002

Multispectral images of a lunar core segment are a new form of continuous data along the length of the core. A new laboratory arrangement was developed to obtain these images. Data processing and initial data analysis for core section 74002 were performed. The images are sensitive to variations in mineralogy and/or maturity of the soil and are easily used (1) in stratigraphic studies of the lunar regolith, (2) for sample selection of representative material, and (3) as ground truth for remote sensing studies.

Pieters, C. M.↗

A methodology for evaluation of an interactive multispectral image processing system

Because of the considerable cost of an interactive multispectral image processing system, an evaluation of a prospective system should be performed to ascertain if it will be acceptable to the anticipated users. Evaluation of a developmental system indicated that the important system elements include documentation, user friendliness, image processing capabilities, and system services. The criteria and evaluation procedures for these elements are described herein. The following factors contributed to the success of the evaluation of the developmental system: (1) careful review of documentation prior to program development, (2) construction and testing of macromodules representing typical processing scenarios, (3) availability of other image processing systems for referral and verification, and (4) use of testing personnel with an applications perspective and experience with other systems. This evaluation was done in addition to and independently of program testing by the software developers of the system.

Kovalick, William M.↗

Calibration of EOS multispectral imaging sensors and solar irradiance variability

Earth Observation System (EOS) optical multispectral imaging sensors provide images of the earth at various spectral and spatial resolutions, in the visible (VIS) and infrared (IR) regions of the solar spectrum. Accurate knowledge of extraterrestrial solar spectral irradiance and its variations with time, are needed to trace sensor calibration in space, and for the development of terrestrial atmospheric models needed in data validation. A brief review of the extraterrestrial solar VIS/IR spectral irradiance available in the literature will be reviewed, and the need to develop an extraterrestrial solar spectral irradiance for the EOS studies will be pointed out. The solar calibration of the Earth Radiation Budget Experiments (ERBE), earth-viewing sensors will be discussed. Observed variations in the solar constant (solar irradiance, at the mean sun-earth distance of one astronomical unit, integrated over all wavelengths), and solar spectral irradiance with solar activity and its implications for EOS studies also will be discussed.

Mecherikunnel, Ann↗

Leica ADS40 Sensor for Coastal Multispectral Imaging

The Leica ADS40 Sensor as it is used for coastal multispectral imaging is presented. The contents include: 1) Project Area Overview; 2) Leica ADS40 Sensor; 3) Focal Plate Arrangements; 4) Trichroid Filter; 5) Gradient Correction; 6) Image Acquisition; 7) Remote Sensing and ADS40; 8) Band comparisons of Satellite and Airborne Sensors; 9) Impervious Surface Extraction; and 10) Impervious Surface Details.

Craig, John C.↗

Spatial Resolution Characterization for AWiFS Multispectral Images

This viewgraph presentation describes the spatial resolution of the AWiFS multispectral images characterized by an estimation of the Modulation Transfer Function (MTF) at Nyquist frequency. The contents include: 1) MTF Analysis; 2) Target Analysis; 3) "Pulse Target"; 4) "Pulse" Method; 5) Target Images; 6) Bridge Profiles; 7) MTF Calculation; 8) MTF Results; and 9) Results Summary.

Blonski, Slawomir↗

Estimation of spectral reflectance curves from multispectral image data

A technique is presented for estimating spectral reflectance curves from multispectral image data even if the spectral samples are obtained from channels whose spectral responsivity is not narrowband. It is demonstrated that these reflectance estimates can be written as a linear combination of the spectral samples and that, analogous to Shannon's sampling theorem, if the spectral reflectance is a natural cubic spline, it can be estimated exactly provided the number of spectral channels is sufficiently large. Simulation results suggest that the accuracy of the spectral reflectance estimates is quite good and very insensitive to the spectral responsivity shapes.

Park, S. K.↗

Mars Exploration Rover Pancam Multispectral Imaging of Rocks, Soils, and Dust at Gusev Crater and Meridiani Planum

Multispectral imaging from the Panoramic Camera (Pancam) instruments on the Mars Exploration Rovers Spirit and Opportunity has provided important new insights about the geology and geologic history of the rover landing sites and traverse locations in Gusev crater and Meridiani Planum. Pancam observations from near-UV to near-IR wavelengths provide limited compositional and mineralogic constraints on the presence abundance, and physical properties of ferric- and ferrous-iron bearing minerals in rocks, soils, and dust at both sites. High resolution and stereo morphologic observations have also helped to infer some aspects of the composition of these materials at both sites. Perhaps most importantly, Pancam observations were often efficiently and effectively used to discover and select the relatively small number of places where in situ measurements were performed by the rover instruments, thus supporting and enabling the much more quantitative mineralogic discoveries made using elemental chemistry and mineralogy data. This chapter summarizes the major compositionally- and mineralogically-relevant results at Gusev and Meridiani derived from Pancam observations. Classes of materials encountered in Gusev crater include outcrop rocks, float rocks, cobbles, clasts, soils, dust, rock grindings, rock coatings, windblown drift deposits, and exhumed whitish/yellowish salty soils. Materials studied in Meridiani Planum include sedimentary outcrop rocks, rock rinds, fracture fills, hematite spherules, cobbles, rock fragments, meteorites, soils, and windblown drift deposits. This chapter also previews the results of a number of coordinated observations between Pancam and other rover-based and Mars-orbital instruments that were designed to provide complementary new information and constraints on the mineralogy and physical properties of martian surface materials.

Bell, J. F., III↗