Results for “multipole order” — Page 2

NASA NTRS1976

Results from the GSFC fluxgate magnetometer on Pioneer 11

A high-field triaxial fluxgate magnetometer was mounted on Pioneer 11 to measure the main magnetic field of Jupiter. It is found that this planetary magnetic field is more complex than that indicated by the results of the Pioneer 10 vector helium magnetometer. At distances less than 3 Jupiter radii, the magnetic field is observed to increase more rapidly than an inverse-cubed distance law associated with any simple dipole model. Contributions from higher-order multipoles are significant, with the quadrupole and octupole being 24 and 21 percent of the dipole moment, respectively. Implications of the results for the study of trapped particles, planetary radio emission, and planetary interiors are discussed. Major conclusions are that the deviation of the main planetary magnetic field from a simple dipole leads to distortion of the L shells of the charged particles and to warping of the magnetic equator. Enhanced absorption effects associated with Amalthea and Io are predicted.

Acuna, M. H.↗

NASA NTRS1980

Some possible effects of Jupiter's rings on the Jovian inner plasmasphere

The ionospheric plasma density on magnetic field lines threading the Jovian rings which are located inside approximately 1.8 Jupiter radii on the jovigraphic equatorial plane is calculated by using a rotating ion exosphere model. It is found that the bulk of the ionospheric particles on these field lines are on ballistic trajectories. On field lines approximately symmetric with respect to the jovigraphic equator, the ring, which to a first approximation would absorb the population of trapped particles, consequently has little effect. On field lines which are made asymmetric by the higher-order multipoles of Jupiter's field and the tilt of the dipole axis, the rings may have a significant effect. It is suggested that better definition of the rings' atmospheric and ionospheric properties is required to model these localized effects. If the rings are found to be an important plasma source for the inner magnetosphere, the present exospheric model will have to be revised.

Luhmann, J. G.↗

NASA NTRS1989

Anisotropy of the diffuse background at millimeter wavelengths

The anisotropy of the diffuse background radiation has been measured with a 10-deg FWHM beam in a broad spectral band from 0.6 to 4.0 mm. A dipole anisotropy is detected with magnitude consistent with previous measurements; the present data may, however, be contaminated by atmospheric emission. Upper limits are set to fluctuations at higher-order multipoles. The most stringent limit is at l = 4, where a 95-percent confidence-level limit of less than 0.00025 is set. The observed level of isotropy sharply constrains the possibility of local astronomical origin for the submillimeter excess.

Bernstein, G. M.↗

NASA NTRS1989

The COBE cosmic 3 K anisotropy experiment: A gravity wave and cosmic string probe

Among the experiments to be carried into orbit next year, by the COBE satellite, are differential microwave radiometers. They will make sensitive all-sky maps of the temperature of the cosmic microwave background radiation at three frequencies, giving dipole, quadrupole, and higher order multipole measurements of the background radiation. The experiment will either detect, or place significant constraints on, the existence of cosmic strings and long wavelength gravity waves.

Bennett, Charles L.↗

NASA NTRS1992

Cold dark matter confronts the cosmic microwave background - Large-angular-scale anisotropies in Omega sub 0 + lambda 1 models

A new technique is used to compute the correlation function for large-angle cosmic microwave background anisotropies resulting from both the space and time variations in the gravitational potential in flat, vacuum-dominated, cold dark matter cosmological models. Such models with Omega sub 0 of about 0.2, fit the excess power, relative to the standard cold dark matter model, observed in the large-scale galaxy distribution and allow a high value for the Hubble constant. The low order multipoles and quadrupole anisotropy that are potentially observable by COBE and other ongoing experiments should definitively test these models.

Gorski, Krzysztof M.↗

NASA NTRS1995

Three-Point Correlations in the COBE DMR 2 Year Anisotropy Maps

We compute the three-point temperature correlation function of the COBE Differential Microwave Radiometer (DMR) 2 year sky maps to search for evidence of non-Gaussian temperature fluctuations. We detect three-point correlations in our sky with a substantially higher signal-to-noise ratio than from the first-year data. However, the magnitude of the signal is consistent with the level of cosmic variance expected from Gaussian fluctuations, even when the low-order multipole moments, up to l = 9, are filtered from the data. These results do not strongly constrain most existing models of structure formation, but the absence of intrinsic three-point correlations on large angular scales is an important consistency test for such models.

Hinshaw, G.↗

NASA NTRS1999

Energy Levels of C IV: The Polarization Method

In a previous publication [Can. J. Phys. 75, 11 (1997)] we calculated the generalized polarizabilities up to multipole order 3 as well as certain higher-order hyperpolarizabilities for two-electron atoms and ions of Z=2-6 and 10. In this paper we apply some of these results to calculate excited-state energies in three times ionized (lithium-like) carbon. For states with angular momentum L greater than or equal to 3 accurate results are obtained using an asymptotic polarizability expansion that includes nonadiabatic effects. Comparison is made with recent optical measurements, and a critical discussion of the correct form of the expansion is given. In addition, the possibility of very accurate measurements of the fine-structure splitting encourages us to present a table of such splittings to very high accuracy. An appendix contains similar results for lithium-like oxygen and neon ions.

Bhatia, A. K.↗

DOE OSTI2020

Left-right canted-cosine-theta magnets

Disclosed herein are superconducting gantry magnets that include multiple quadrupole winding sections placed in sequence on a curve such that the effective current direction is reversed between sections. This produces alternating quadrupole field regions along the length of the bend whose individual integral strengths can be tuned by the location of the current polarity transitions. A simple transition scheme to reverse the current between sections can be implemented to allow for the use of one continuous winding and power supply. Dipole windings can be included in the superconducting gantry magnets so that the magnets produce superposed dipole and alternating quadrupole fields. The disclosed design for the windings and transition scheme to reverse current polarity can be implemented for higher order multipoles as well.

43 PARTICLE ACCELERATORS↗

DOE OSTI2025

Interplay between multipolar order and multipole-induced superconductivity in PrTi 2 Al 20

Multipolar moments entail a new route to tackle frontier problems in superconductivity (SC). A key progress in the search for multipolar SC is the discovery of PrTr 2 Al 20 (Tr = Ti, V), which possesses quadrupolar and octupolar but no magnetic dipolar moments. The Kondo entanglement of these multipolar moments with conduction electrons leads to exotic SC within the multipolar ordered phase, though the precise nature of the SC remains unexplored. We experimentally investigate the SC gap structure of SC in PrTi 2 Al 20 and its La-doping evolution. Our results indicate deviations from a single s-wave gap, instead favoring nodal d-wave or multiple gaps. While the SC is robust against La dilution, the SC gap structure changes with minimal La doping, coinciding with a sharp change in the ferroquadrupolar (FQ) order. This suggests an intimate link between the quadrupolar order parameter and SC pairing, providing insight into the coexistence of SC with multipolar order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1972

The induced magnetic field of the moon - Conductivity profiles and inferred temperature.

Electromagnetic induction in the moon driven by fluctuations of the interplanetary magnetic field is used to determine the lunar bulk electrical conductivity. The earlier data are now augmented by an order of magnitude. The present data clearly show the north-south and east-west transfer function difference as well as the high-frequency rollover suggested earlier. The difference is shown to be compatible over the midfrequency range (0.001 to 0.01 Hz) with a noise source associated with the compression of the local remanent field by solar wind dynamic pressure fluctuations. The rollover of the transfer functions is shown to result from higher order magnetic multipole radiation; electric multipoles appear supressed, although a vestigial TM interaction may still be present. Models for two, three, and four layer; current layer, double current layer, and core plus current layer moons are generated by inversion of the data, using a theory that incorporates higher-order multipoles.

Sonett, C. P.↗

NASA NTRS1988

Static multipole polarisabilities and second-order Stark shift in francium

The multipole polarizability of the ground state of francium is calculated by utilizing both the variational technique of Davison and the quantum defect theory underlying the Bates-Damgaard method. This approach is also shown to yield reasonable results for other alkali atoms. Second-order Stark shift for the ground state of francium is presented as a function of field strength for possible future experimental comparison.

Khan, F.↗

DOE OSTI2025

BHResist [SWR-25-57]

BHResist is a pure python library for computing thermal resistance within single-u, double-u, and coaxial grouted borehole heat exchangers. For single and double u-tube configurations, the methods use the 1st-order closed-form multipole approximations, which typically produces results with less than 1% error when compared to the 10th-order multipole method. Coaxial borehole methods apply a simple 1D resistance network method. This is intended to be a lightweight library that can be easily imported into any other Python tool, with no bulky dependencies.

Mitchell, Matt [National Renewable Energy Laborato↗

DOE OSTI2026

Determining Optimal Magnetometer Configuration on MAGIS-100

Long-baseline atom interferometers such as the Matter-wave Atomic Gradiometer Interferometric Sensor (MAGIS-100) require stringent control and continuous characterization of background magnetic fields and spatial gradients to prevent systemic phase shifts that mimic ultralight dark matter or gravitational wave signatures. Because direct sensor placement within the ultra-high vacuum beam pipe is infeasible, in-situ magnetic field monitoring relies on external sensor arrays situated in the surrounding annular region. This work demonstrates a field reconstruction framework for a 5.3-meter MAGIS-100 modular section using finite-element Opera simulations. Transverse magnetic fields are expanded using a cylindrical multipole framework as informed by Fermilab’s Muon g-2 experiment, with magnetometer array configurations optimized via Fisher information matrix D-optimality. Inverting external sensor readings through a Gauss-Newton scheme recovers interior tube fields across distinct axial positions. In the discontinuity-averse uniform region (slice pair P4), the model achieves sub-noise-floor performance with a cross-validated root-mean-square error (RMSE) of $6.7227 \times 10^{-4}\text{ A/m}$ ($0.845\times$ sensor noise floor) and an interior field coefficient of variation of $1.71\%$. An elbow criterion in the Fisher bounds establishes $n_{\text{max}} = 2$ as the optimal multipole truncation order to prevent noise amplification from over-parameterization, with $n_{\text{max}} = 3$ (sextupole) order chosen for analysis to demonstrate further complexity and cross-pair comparison. Furthermore, analytical differentiation of the fitted multipole coefficients yields dense spatial maps of the transverse Jacobian gradient matrix $\nabla \mathbf{H}$ along with propagated $1\sigma$ uncertainty bounds across the beam region ($r \le 2.75\text{ in}$). This operational framework confirms that external magnetometer arrays can reliably monitor magnetic field uniformity and spatial gradients along the 100-meter flight path given appropriate sampling for any complexity order.

Appleby, Darwin [William Rainey Harper Coll.] (ORC↗

DOE OSTI2026

Determining Optimal Magnetometer Configuration on MAGIS-100

Long-baseline atom interferometers such as the Matter-wave Atomic Gradiometer Interferometric Sensor (MAGIS-100) require stringent control and continuous characterization of background magnetic fields and spatial gradients to prevent systemic phase shifts that mimic ultralight dark matter or gravitational wave signatures. Because direct sensor placement within the ultra-high vacuum beam pipe is infeasible, in-situ magnetic field monitoring relies on external sensor arrays situated in the surrounding annular region. This work demonstrates a field reconstruction framework for a 5.3-meter MAGIS-100 modular section using finite-element Opera simulations. Transverse magnetic fields are expanded using a cylindrical multipole framework as informed by Fermilab’s Muon g-2 experiment, with magnetometer array configurations optimized via Fisher information matrix D-optimality. Inverting external sensor readings through a Gauss-Newton scheme recovers interior tube fields across distinct axial positions. In the discontinuity-averse uniform region (slice pair P4), the model achieves sub-noise-floor performance with a cross-validated root-mean-square error (RMSE) of $6.7227 \times 10^{-4}\text{ A/m}$ ($0.845\times$ sensor noise floor) and an interior field coefficient of variation of $1.71\%$. An elbow criterion in the Fisher bounds establishes $n_{\text{max}} = 2$ as the optimal multipole truncation order to prevent noise amplification from over-parameterization, with $n_{\text{max}} = 3$ (sextupole) order chosen for analysis to demonstrate further complexity and cross-pair comparison. Furthermore, analytical differentiation of the fitted multipole coefficients yields dense spatial maps of the transverse Jacobian gradient matrix $\nabla \mathbf{H}$ along with propagated $1\sigma$ uncertainty bounds across the beam region ($r \le 2.75\text{ in}$). This operational framework confirms that external magnetometer arrays can reliably monitor magnetic field uniformity and spatial gradients along the 100-meter flight path given appropriate sampling for any complexity order.

Appleby, Darwin [William Rainey Harper Coll.] (ORC↗

DOE OSTI2026

In-Situ Magnetic Field Reconstruction in the MAGIS-100 Experiment

Long-baseline atom interferometers such as the Matter-wave Atomic Gradiometer Interferometric Sensor (MAGIS-100) require stringent control and continuous characterization of background magnetic fields and spatial gradients to prevent systemic phase shifts that mimic ultralight dark matter or gravitational wave signatures. Because direct sensor placement within the ultra-high vacuum beam pipe is infeasible, in-situ magnetic field monitoring relies on external sensor arrays situated in the surrounding annular region. This work demonstrates a field reconstruction framework for a 5.3-meter MAGIS-100 modular section using finite-element Opera simulations. Transverse magnetic fields are expanded using a cylindrical multipole framework as informed by Fermilab’s Muon g-2 experiment, with magnetometer array configurations optimized via Fisher information matrix D-optimality. Inverting external sensor readings through a Gauss-Newton scheme recovers interior tube fields across distinct axial positions. In the discontinuity-averse uniform region (slice pair P4), the model achieves sub-noise-floor performance with a cross-validated root-mean-square error (RMSE) of $6.7227 \times 10^{-4}\text{ A/m}$ ($0.845\times$ sensor noise floor) and an interior field coefficient of variation of $1.71\%$. An elbow criterion in the Fisher bounds establishes $n_{\text{max}} = 2$ as the optimal multipole truncation order to prevent noise amplification from over-parameterization, with $n_{\text{max}} = 3$ (sextupole) order chosen for analysis to demonstrate further complexity and cross-pair comparison. Furthermore, analytical differentiation of the fitted multipole coefficients yields dense spatial maps of the transverse Jacobian gradient matrix $\nabla \mathbf{H}$ along with propagated $1\sigma$ uncertainty bounds across the beam region ($r \le 2.75\text{ in}$). This operational framework confirms that external magnetometer arrays can reliably monitor magnetic field uniformity and spatial gradients along the 100-meter flight path given appropriate sampling for any complexity order.

Appleby, Darwin [William Rainey Harper Coll.; Ferm↗

DOE OSTI2021

Natively Periodic Fast Multipole Method: Approximating the Optimal Green’s Function

The fast multipole method (FMM) obeys periodic boundary conditions "natively" if it uses a periodic Green's function for computing the multipole expansion in the interaction zone of each FMM oct-tree node. One can define the "optimal" Green's function for such a method that results in the numerical solution that converges to the equivalent particle-mesh (PM) solution in the limit of sufficiently high order of multipoles. A discrete functional equation for the optimal Green's function can be derived, but is not practically useful as methods for its solution are not known. Instead, this paper presents an approximation for the optimal Green's function that is accurate to better than 10 -3 in ${L}_{\mathrm{MAX}}$ norm and 10 -4 in L 2 norm for practically useful multipole counts. Such an approximately optimal Green's function offers a practical way for implementing the FMM with periodic boundary conditions natively, without the need to compute lattice sums or to rely on hybrid FMM-PM approaches.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2025

Spinor representations for fields with any spin: Lorentz tensor basis for operators and covariant multipole decomposition

This paper discusses a framework to parametrize and decompose operator matrix elements for particles with higher spin (j > 1/2) using chiral representations of the Lorentz group, i.e. the (j, 0) and (0, j) representations and their parity-invariant direct sum. Unlike traditional approaches that require imposing constraints to eliminate spurious degrees of freedom, these chiral representations contain exactly the 2j + 1 components needed to describe a spin-j particle. The central objects in the construction are the t-tensors, which are generalizations of the Pauli four-vector σ μ for higher spin. For the generalized spinors of these representations, we demonstrate how the algebra of the t-tensors allows to formulate a generalization of the Dirac matrix basis for any spin. For on-shell bilinears, we show that a set consisting exclusively of covariant multipoles of order 0 ≤ m ≤ 2j forms a complete basis. We provide explicit expressions for all bilinears of the generalized Dirac matrix basis, which are valid for any spin value. As a byproduct of our derivations we present an efficient algorithm to compute the t-tensor matrix elements. The formalism presented here paves the way to use a more unified approach to analyze the non-perturbative QCD structure of hadrons and nuclei across different spin values, with clear physical interpretation of the resulting distributions as covariant multipoles.

Angular momentum of light↗

DOE OSTI2021

Ordering effects on deformation substructures and strain hardening behavior of a CrCoNi based medium entropy alloy

Here, a CrCoNi based medium entropy alloy with small additions of Ti, Al and Nb (denoted as (CrCoNi) 93 Al 4 Ti 2 Nb) in the as-quenched condition, exhibits tensile properties comparable to those of the equiatomic CrCoNi alloy at room temperature. Dark field transmission electron microscopy (TEM), atomic resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) together with atom probe tomography (APT) show that spatially-localized long range ordering (LRO) L1 2 domains exist in this alloy. The evolution of deformation substructure with plastic deformation in this alloy was characterized using electron backscatter diffraction (EBSD), electron channeling contrast imaging (ECCI) and STEM based techniques including the recently developed weak beam dark field STEM imaging. Plastic deformation occurs by the slip of a/2<110>dislocations, which are narrowly dissociated into Shockley partial dislocations on {111} slip planes. Their dissociation distances in the (CrCoNi) 93 Al 4 Ti 2 Nb alloy are much smaller than the widths of the corresponding partials in the equiatomic CrCoNi alloy due to one or more of the minor alloying elements (Al, Ti, Nb). Dislocation slip in this alloy has a pronounced planar character. The leading dislocations in slip bands glide as pairs due to the existence of LRO domains. Multipoles were formed through the slip of dislocations with opposite signs on adjacent {111} slip planes. Those multipoles serve as building blocks for the formation of subgrain structures consisting of fine slip bands. The distances between slip bands were continuously refined during plastic deformation and dynamic refinement of slip bands plays a crucial role in strain hardening. The effects of LRO domains on planar dislocation slip, the deactivation of deformation twinning and strain hardening of this alloy are discussed.

36 MATERIALS SCIENCE↗