Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multigrid reduction in time”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Adaptive Mesh Refinement for Parallel in Time Methods

The project applied the multigrid-reduction-in-time (MGRIT) algorithm to an existing sub-cycled adaptive mesh refinement (AMR) code to investigate the performance of flows dominated by inertial physics. Previous work demonstrated good performance from MGRIT+AMR applied to flows dominated by diffusive physics. Consistent with previous experience, inertial physics negatively affected convergence rates and performance. Efforts to circumvent this issue by appealing to the physics of turbulence were investigated. It has been demonstrated that scales can be effectively transferred between multigrid levels for a turbulent flow resulting in a) partial convergence observed and b) nearly identical results to sequential time-stepping. Performance improvements have not yet been demonstrated - attempts at coarsening the grid on coarser MG levels compromises the solution quality and leads to divergence. This report summarize the accomplishments for the time-frame from 10/5/2020 to 12/31/2020 with an informal no-cost-extension to 05/20/2021

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Parallel-in-Time Simulation of Lindblad's Equation

Constructing fast quantum logic gates is critical to building a scalable quantum computer. We consider a qudit, a quantum version of a bit that can take an arbitrary number of states, coupled with a cavity. In this project, we wish to force the qudit to reach the 0-state, for any possible initial state. The coupled system changes in time according to Lindblad’s equation, an ordinary differential equation on the density matrix of the quantum system. Lindblad’s equation contains some parameters that we can control, so-called control functions. We seek control functions which force the qudit to the 0-state within 2 microseconds, which is much faster than what is currently done in practice. The search method is gradient descent, a numerical optimization method that uses gradient information to iteratively improve the control parameters. My contribution to this project is an attempt to speed up the computation of the gradient. It currently takes about 40 seconds to compute the gradient which involves solving a set of ODEs sequentially. Current supercomputers have thousands of cores, but sequential computations can only make use of 1 core at a time. We wish to divide up the work better, so that we can use many more cores at once. To this end, we have implemented the Multigrid Reduction in Time (MGRIT) algorithm. We perform a systematic parameter search on how to best apply this algorithm. Results indicate a 25 percent speed up for solving Lindblad’s equation and determining how close the final state is the 0-state.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Non-Intrusive Parallel-in-Time Solvers for Partial Differential Equations (Final Report)

Many time-dependent problems and simulations are often modeled using Partial Differential Equations. Traditional modeling approaches that use sequential time-stepping are reaching a bottleneck in optimizing efficiency. The Center of Applied Science and Computing at Lawrence Livermore National Laboratory extensively works on parallelizing these algorithms to leverage the increasing computational power from the growing number of processors in computer hardware. In particular, they aim to design non-intrusive algorithms that can generalize to a variety of problems and sizes without requiring additional information from or modifications on the original problems. Multigrid Reduction in Time (MGRIT) is a parallel-in-time algorithm that is designed to be non-intrusive. This project focuses on increasing the efficiency of MGRIT by approximating the coarse-grid operator using machine learning approaches as a means to find the most non-intrusive, or general, solution.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

A space-time parallel algorithm with adaptive mesh refinement for computational fluid dynamics

This work describes a space-time parallel algorithm with space-time adaptive mesh refinement (AMR). AMR with subcycling is added to multigrid reduction-in-time (MGRIT) in order to provide solution efficient adaptive grids with a reduction in work performed on coarser grids. This algorithm is achieved by integrating two software libraries: XBraid (Parallel time integration with multigrid. https://computation.llnl.gov/projects/parallel-timeintegration-multigrid) and Chombo (Chombo software package for AMR applications—design document, 2014). The former is a parallel time integration library using multigrid and the latter is a massively parallel structured AMR library. Employing this adaptive space-time parallel algorithm is Chord (Comput Fluids 123:202–217, 2015), a computational fluid dynamics (CFD) application code for solving compressible fluid dynamics problems. For the same solution accuracy, speedups are demonstrated from the use of space-time parallelization over the time-sequential integration on Couette flow and Stokes’ second problem. On a transient Couette flow case, at least a 1.5× speedup is achieved, and with a time periodic problem, a speedup of up to 13.7× over the time-sequential case is obtained. In both cases, the speedup is achieved by adding processors and exploring additional parallelization in time. The numerical experiments show the algorithm is promising for CFD applications that can take advantage of the time parallelism. Future work will focus on improving the parallel performance and providing more tests with complex fluid dynamics to demonstrate the full potential of the algorithm.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Parallel-in-Time Solution of Scalar Nonlinear Conservation Laws

Here, we consider the parallel-in-time solution of scalar nonlinear conservation laws in one spatial dimension. The equations are discretized in space with a conservative finite-volume method using weighted essentially nonoscillatory (WENO) reconstructions, and in time with high-order explicit Runge–Kutta methods. The solution of the global, discretized space-time problem is sought via a nonlinear iteration that uses a novel linearization strategy in cases of nondifferentiable equations. Under certain choices of discretization and algorithmic parameters, the nonlinear iteration coincides with Newton’s method, although, more generally, it is a preconditioned residual correction scheme. At each nonlinear iteration, the linearized problem takes the form of a certain discretization of a linear conservation law over the space-time domain in question. An approximate parallel-in-time solution of the linearized problem is computed with a single multigrid reduction-in-time (MGRIT) iteration; however, any other effective parallel-in-time method could be used in its place. The MGRIT iteration employs a novel coarse-grid operator that is a modified conservative semi-Lagrangian discretization and generalizes those we have developed previously for nonconservative scalar linear hyperbolic problems. Numerical tests are performed for the inviscid Burgers and Buckley–Leverett equations. For many test problems, the solver converges in just a handful of iterations with a convergence rate independent of mesh resolution, including problems with (interacting) shocks and rarefactions.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Applying Time-Parallelization to Turbulent Flows

Parallelization of the temporal domain is explored for the solution of turbulent flows. Multigrid reduction-in-time (MGRIT) is used to advance the large-scale fluid dynamics in time sequentially on the coarsest space-time grid but propagate the information in time parallel on all other levels. The goal of this process is to accurately and efficiently resolve the coarse-scale turbulence structure and use that to drive the fine-scales of the turbulent flow. The extra forcing from nonlinear multigrid facilitates the coupling and interaction between fine and coarse scales, through which the multiscale nonlinear physics is properly captured. Adaptive mesh refinement is employed to finely resolve only the regions with strong gradients, which provides further computational efficiency. The underlying computational fluid dynamics solver is a fourth-order finite-volume scheme with the standard 4-stage Runge-Kutta method. An advanced approach is devised and implemented to enable MGRIT to solve highly turbulent flows successfully. Furthermore, the method is applied to solve a Taylor-Green vortex problem and a doubleshear-layer turbulent mixing flow. Results are promising, validating that MGRIT with the filtering approach has the potential to efficiently solve general turbulent flows.

Computational Fluid Dynamics↗
DOE OSTI2024

Parallel-in-Time Methods for Method-of-Lines Discretizations of Nonlinear Hyperbolic PDEs and Systems (Final Report)

The work for the subcontract is situated in the area of parallel-in-time integration for hyperbolic partial differential equations (PDEs). Parallel-in-time integration is an active area of research due to its ability to enable faster numerical simulations for applications throughout many areas of science. The work in this subcontract builds on a variety of results that were obtained, as part of the work performed for Subcontract No. B648355, for the Multigrid Reduction-in-Time (MGRIT) method from [1] applied to hyperbolic PDEs. This subcontract extends these results further to more efficient methods and to the case of method-of-lines discretizations for nonlinear hyperbolic PDES and systems of PDEs. The following is a summary of the research performed and results achieved during milestone periods 1, 2 and 3 by the PI (Hans De Sterck) and Postdoctoral Research Associate (Oliver Krzysik), for required tasks 1-4 (as listed in the Statement of Work): Research over the previous year has been split into three main projects: (i) solution of acoustic equation system; (ii) solution of nonlinear scalar hyperbolic PDEs; (iii) solution of nonlinear hyperbolic systems of PDEs.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Parallel-in-Time Solution of Hyperbolic PDE Systems via Characteristic-Variable Block Preconditioning

We consider the parallel-in-time solution of both linear and nonlinear hyperbolic partial differential equation (PDE) systems in one spatial dimension. In the nonlinear setting, the discretized equations are solved with a preconditioned residual iteration based on a global linearization. The linear(ized) equation systems are approximately solved parallel-in-time using a block preconditioner applied in the characteristic variables of the underlying linear(ized) hyperbolic PDE. This change of variables is motivated by the observation that intervariable coupling between characteristic variables is weak, at least locally where spatio-temporal variations in the eigenvectors of the associated flux Jacobian are sufficiently small, while that between the original variables is not. For an ℓ-dimensional system of PDEs, applying the preconditioner consists of solving a sequence of ℓ scalar linear(ized)-advection-like problems, each associated with a different characteristic wave-speed in the underlying linear(ized) PDE. Furthermore, we approximately solve these linear advection problems using multigrid reduction-in-time (MGRIT); however, any other suitable parallel-in-time method could be used. Numerical examples are shown for the (linear) acoustics equations in heterogeneous media and for the (nonlinear) shallow water equations and Euler equations of gas dynamics with shocks and rarefactions. For many test problems, the solver converges in just a handful of iterations and with mesh-independent convergence rates.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

TorchBraid: High-Performance Layer-Parallel Training of Deep Neural Networks with MPI and GPU Acceleration

TorchBraid is a high-performance implementation of layer-parallel training for deep neural networks (DNNs) supporting MPI-based parallelism and GPU acceleration. Layer-parallel training has been developed to overcome the serialization inherent in forward and backward propagation of DNNs that limits utilization of computational resources in the strong scaling limit. To achieve this, TorchBraid integrates the PyTorch neural network framework with the state-of-the-art XBraid time-parallel library. Furthermore, this article presents the use and performance of TorchBraid, in addition to solutions for overcoming the algorithmic challenges inherent in combining automatic differentiation with layer-parallel. Results are presented with and without GPU acceleration for the Tiny ImageNet and MNIST image classification data sets, as well as recurrent neural networks. Overall, TorchBraid enables fast training of DNNs, both in a strong and weak scaling context. In addition to the TorchBraid software, several new advances in applying layer-parallel algorithms are detailed. Integration of layer-parallel with data-parallel algorithms is presented for the first time, showing the computational advantages of the combination. Standard deep learning techniques, like batch-normalization, are developed for layer-parallel training. Finally, a new approach combining layer-parallel with spatial coarsening in order to accelerate training for 3D image classification shows roughly a 10× speedup over serial execution.

Layer-parallel↗
NASA NTRS1984

Multigrid techniques for the numerical solution of the diffusion equation

An accurate numerical solution of diffusion problems containing large local gradients can be obtained with a significant reduction in computational time by using a multigrid computational scheme. The spatial domain is covered with sets of uniform square grids of different sizes. The finer grid patterns overlap the coarse grid patterns. The finite-difference expressions for each grid pattern are solved independently by iterative techniques. Two interpolation methods were used to establish the values of the potential function on the fine grid boundaries with information obtained from the coarse grid solution. The accuracy and computational requirements for solving a test problem by a simple multigrid and a multilevel-multigrid method were compared. The multilevel-multigrid method combined with a Taylor series interpolation scheme was found to be best.

Phillips, R. E.↗
NASA NTRS1996

Multigrid Approach to Incompressible Viscous Cavity Flows

Two-dimensional incompressible viscous driven-cavity flows are computed for Reynolds numbers on the range 100-20,000 using a loosely coupled, implicit, second-order centrally-different scheme. Mesh sequencing and three-level V-cycle multigrid error smoothing are incorporated into the symmetric Gauss-Seidel time-integration algorithm. Parametrics on the numerical parameters are performed, achieving reductions in solution times by more than 60 percent with the full multigrid approach. Details of the circulation patterns are investigated in cavities of 2-to-1, 1-to-1, and 1-to-2 depth to width ratios.

Wood, William A.↗
NASA NTRS1995

Convergence acceleration of the Proteus computer code with multigrid methods

This report presents the results of a study to implement convergence acceleration techniques based on the multigrid concept in the two-dimensional and three-dimensional versions of the Proteus computer code. The first section presents a review of the relevant literature on the implementation of the multigrid methods in computer codes for compressible flow analysis. The next two sections present detailed stability analysis of numerical schemes for solving the Euler and Navier-Stokes equations, based on conventional von Neumann analysis and the bi-grid analysis, respectively. The next section presents details of the computational method used in the Proteus computer code. Finally, the multigrid implementation and applications to several two-dimensional and three-dimensional test problems are presented. The results of the present study show that the multigrid method always leads to a reduction in the number of iterations (or time steps) required for convergence. However, there is an overhead associated with the use of multigrid acceleration. The overhead is higher in 2-D problems than in 3-D problems, thus overall multigrid savings in CPU time are in general better in the latter. Savings of about 40-50 percent are typical in 3-D problems, but they are about 20-30 percent in large 2-D problems. The present multigrid method is applicable to steady-state problems and is therefore ineffective in problems with inherently unstable solutions.

Demuren, A. O.↗
NASA NTRS1993

Thin-layer and full Navier-Stokes calculations for turbulent supersonic flow over a cone at an angle of attack

The proper use of a computational fluid dynamics code requires a good understanding of the particular code being applied. In this report the application of CFL3D, a thin-layer Navier-Stokes code, is compared with the results obtained from PARC3D, a full Navier-Stokes code. In order to gain an understanding of the use of this code, a simple problem was chosen in which several key features of the code could be exercised. The problem chosen is a cone in supersonic flow at an angle of attack. The issues of grid resolution, grid blocking, and multigridding with CFL3D are explored. The use of multigridding resulted in a significant reduction in the computational time required to solve the problem. Solutions obtained are compared with the results using the full Navier-Stokes equations solver PARC3D. The results obtained with the CFL3D code compared well with the PARC3D solutions.

Smith, Crawford F.↗
NASA NTRS1993

A multigrid nonoscillatory method for computing high speed flows

A multigrid method using different smoothers has been developed to solve the Euler equations discretized by a nonoscillatory scheme up to fourth order accuracy. The best smoothing property is provided by a five-stage Runge-Kutta technique with optimized coefficients, yet the most efficient smoother is a backward Euler technique in factored and diagonalized form. The singlegrid solution for a hypersonic, viscous conic flow is in excellent agreement with the solution obtained by the third order MUSCL and Roe's method. Mach 8 inviscid flow computations for a complete entry probe have shown that the accuracy is at least as good as the symmetric TVD scheme of Yee and Harten. The implicit multigrid method is four times more efficient than the explicit multigrid technique and 3.5 times faster than the single-grid implicit technique. For a Mach 8.7 inviscid flow over a blunt delta wing at 30 deg incidence, the CPU reduction factor from the three-level multigrid computation is 2.2 on a grid of 37 x 41 x 73 nodes.

Li, C. P.↗
NASA NTRS1993

A multi-level solution algorithm for steady-state Markov chains

A new iterative algorithm, the multi-level algorithm, for the numerical solution of steady state Markov chains is presented. The method utilizes a set of recursively coarsened representations of the original system to achieve accelerated convergence. It is motivated by multigrid methods, which are widely used for fast solution of partial differential equations. Initial results of numerical experiments are reported, showing significant reductions in computation time, often an order of magnitude or more, relative to the Gauss-Seidel and optimal SOR algorithms for a variety of test problems. The multi-level method is compared and contrasted with the iterative aggregation-disaggregation algorithm of Takahashi.

Horton, Graham↗
DOE OSTI2019

Improving solve time of aggregation-based adaptive AMG

In this paper, we propose improving the solve time of a bootstrap algebraic multigrid (AMG) designed previously by the authors. This is achieved by incorporating the information, a set of algebraically smooth vectors, generated by the bootstrap algorithm, in a single hierarchy by using sufficiently large aggregates, and these aggregates are compositions of aggregates already built throughout the bootstrap algorithm. The modified AMG method has good convergence properties and shows significant reduction in both memory and solve time. These savings with respect to the original bootstrap AMG are illustrated on some difficult (for standard AMG) linear systems arising from discretization of scalar and vector function elliptic partial differential equations in both 2D and 3D.

97 MATHEMATICS AND COMPUTING↗
NASA NTRSDate not supplied

Implicit Preconditioning for Explicit Multigrid Solvers on Cut-Cell Cartesian Meshes

This work assesses the effectiveness of linearized implicit Euler preconditioning for multigrid solvers using an unpreconditioned, Jacobian-free Newton Krylov method to converge the linear system of equations. Multigrid convergence rates improve to approximately 0.75 across the cases tested including a Mach 2 supersonic wedge, transonic NACA 0012 airfoil, and ONERA M6 wing. While larger Krylov subspaces increase the convergence rate, they also increase the computational cost, such that 4-8 Krylov vectors often offers the fastest turnaround. Further reductions in computational cost are achieved with a sequential hybrid preconditioner that begins with the explicit multigrid solver before transitioning to the preconditioned algorithm later on. In addition, a novel implementation of dual time stepping is extended to include both common BDF methods as well as high-order implicit Runge-Kutta schemes. This particular formulation, which uses A −1 preconditioning, is amenable to matrix-free solvers, and the L-stable methods are especially suited for meshes with arbitrarily small cut-cells. Asymptotic order of convergence is demonstrated for BDF1, BDF2, SDIRK2, and 3rd-order Radau IIA time integration with unsteady 2D vortex simulations.

ARMD↗
DOE OSTI2022

Parallel-in-Time Integration for Nonlinear Hyperbolic Problems (Final Report)

The work for the subcontract was situated in the area of parallel-in-time integration for hyperbolic partial differential equations (PDEs). Parallel-in-time integration is an active area of research due to its ability to enable faster numerical simulations for applications throughout many areas of science. Over the past two decades, much progress has been made in this area; however, this progress has largely been limited to diffusion-dominated PDEs, with some recent success in scalar linear hyperbolic PDEs. Given the ubiquity of numerical simulations of hyperbolic PDEs throughout the sciences, in particular, nonlinear hyperbolic systems, there is a strong need to develop efficient parallel-in-time techniques for hyperbolic problems beyond simple scalar and linear cases, which is the main topic of this subcontract. The main focus of the work was to further develop and perfect coarse-grid operators for the Multigrid Reduction-inTime (MGRIT) method applied to hyperbolic PDEs that were recently proposed in PhD thesis, based on a modified semi-Lagrangian approach.

97 MATHEMATICS AND COMPUTING↗