Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multi-spectral”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Interactive multi-spectral analysis of more than one Sonrai village in Niger, West Africa

Use of LANDSAT data and an interaction system is considered for identifying and measuring small scale compact human settlements (villages) for demographic and anthropological studies. Because village components are not uniformly distributed within any one village, they apparently are multimodal, spectrally. Therefore, the functions of location and enumeration are kept separate. Measurement of a known village is compared with CCT response.

Reining, P.↗
DOE OSTI2025

Simultaneous on-chip generation of violet, blue, cyan, green, yellow, orange, and red light from an octave-spanning infrared frequency comb

An integrated, multi-spectral visible-light source could significantly benefit technologies such as displays, medical imaging, spectroscopy, visible-light communications, and astrophysics. However, despite recent advances in chip-scale visible lasers, simultaneously generating light of all colors in a single chip has been challenging. Existing solutions are either not suitable for full chip-scale integration, or are fundamentally difficult to scale. Here we demonstrate the simultaneous on-chip generation of infrared, red, orange, yellow, green, cyan, blue, and violet light. Leveraging the low loss, low dispersion, and high density of modes of an adiabatic multimode silicon nitride (SiN) microresonator, we use a single infrared pump of moderate power (~130 mW) to produce an octave-spanning infrared frequency comb that is then converted to different portions of the visible spectrum. We measure non-mode-locked combs and soliton steps corresponding to mode-locked states, making our comb generator suitable for applications that demand either low or high coherence. Since the required pump power is compatible with high-power lasers demonstrated in the same SiN platform, our multi-octave light generator can be fully integrated in a chip-scale form factor. We envision that such a light source will be a catalyst for the development and deployment of miniaturized multi-spectral technologies for quantum systems, medical imaging, displays, and spectroscopy.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

An end-to-end deep learning solution for automated LiDAR tree detection in the urban environment

Cataloging and classifying trees in the urban environment is a crucial step in urban and environmental planning; however, manual collection and maintenance of this data is expensive and time-consuming. Although algorithmic approaches that rely on remote sensing data have been developed for tree detection in forests, they generally struggle in the more varied urban environment. This work proposes a novel end-to-end deep learning method for the detection of trees in the urban environment from remote sensing data. Specifically, we develop and train a novel PointNet-based neural network architecture to predict tree locations directly from LiDAR data augmented with multi-spectral imagery. We compare this model to a number of high-performing baselines on a large and varied dataset in the Southern California region, and find that our method outperforms all baselines in terms of tree detection ability (75.5% F-score) and positional accuracy (2.28 meter root mean squared error), while being highly efficient. We then analyze and compare the sources of errors, and how these reveal the strengths and weaknesses of each approach. Our results highlight the importance of fusing spectral and structural information for remote sensing tasks in complex urban environments.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1972

The Earth Resources Technology Satellites ERTS-A and -B.

The Earth Resources Technology Satellites, ERTS-A and -B, are a significant part of the NASA Earth Resources Survey Program. A general description of the requirements and implementation of the ERTS system - sensors, spacecraft, operational control, and data processing developed to acquire, process, and distribute multi-spectral images of the earth's surface is presented.

Scull, W. E.↗
NASA NTRS1973

Design study report. Volume 2: Electronic unit

The recording system discussed is required to record and reproduce wideband data from either of the two primary Earth Resources Technology Satellite sensors: Return Beam Vidicon (RBV) camera or Multi-Spectral Scanner (MSS). The camera input is an analog signal with a bandwidth from dc to 3.5 MHz; this signal is accommodated through FM recording techniques which provide a recorder signal-to-noise ratio in excess of 39 db, black-to-white signal/rms noise, over the specified bandwidth. The MSS provides, as initial output, 26 narrowband channels. These channels are multiplexed prior to transmission, or recording, into a single 15 Megabit/second digital data stream. Within the recorder, the 15 Megabit/second NRZL signal is processed through the same FM electronics as the RBV signal, but the basic FM standards are modified to provide an internal, 10.5 MHz baseland response with signal-to-noise ratio of about 25 db. Following FM demodulation, however, the MSS signal is digitally re-shaped and re-clocked so that good bit stability and signal-to-noise exist at the recorder output.

Source record↗
NASA NTRS1973

Hydrogeology of closed basins and deserts of South America, ERTS-1 interpretations

Images from the Earth Resources Technology Satellite (ERTS-1) contain data useful in studies of hydrogeology, geomorphology, and paleoclimatology. Sixteen Return Beam Vidicon (RBV) images and 15 Multi-Spectral Scanner (MSS) images were studied. These covered deserts and semidesert areas in southwestern Bolivia, northwestern Argentina, northern Chile, and southeastern Peru from July 30 to November 17, 1972. During the first 3 months after launching, high-quality cloud-free imagery was obtained over approximately 90 percent of the region of interior drainage, or an area of 170,000 square miles.

Stoertz, G. E.↗
NASA NTRS1973

Automatic interpretation of ERTS data for forest management

Automatic stratification of forested land from ERTS-1 data provides a valuable tool for resource management. The results are useful for wood product yield estimates, recreation and wild life management, forest inventory and forest condition monitoring. Automatic procedures based on both multi-spectral and spatial features are evaluated. With five classes, training and testing on the same samples, classification accuracy of 74% was achieved using the MSS multispectral features. When adding texture computed from 8 x 8 arrays, classification accuracy of 99% was obtained.

Kirvida, L.↗
NASA NTRS1973

Seasonal changes of littoral transport and beach width and resulting effect on protective structures

The shorelines of Maryland's portion of the Chesapeake Bay exhibit seasonal changes in direction of littoral transport and resulting beach width. Observation and study of this process at selected locations emphasizes the necessity of study for a complete year's seasonal cycle before stating erosion rates of an area to be protected by structures and the cyclincal presence or absence of beaches. Seasonal beach conditions at four selected sites are described along with resulting physical changes to protective structures. Through the use of ERTS-1 multi-spectral photography, it will be possible to make widespread predictions elsewhere in the Bay as a direct aid in protective structure design.

Slaughter, T. H.↗
NASA NTRS1974

The detection by ERTS-1 of wind-induced ocean surface features in the lee of the Antilles Islands

Photographic data received from the ERTS-1 satellite over the Lesser Antilles Islands show distinct ocean features on the leeward side of each island. Attempts to relate these features to ocean eddy formations with the aid of ground truth data proved unsuccessful. However, surface and upper air wind data indicate a good correlation with the size, shape, and downwind extent of the ocean features. Studies to date indicate strongly that these features result from horizontal differences in a sea surface roughness due to the wind-shadow effect of the islands. The results suggest that horizontal variations in the reflectance of the sea surface will make remote sensing of the ocean mixed layer more difficult than previously anticipated. The surface reflection seems to be large enough to mask the smaller variations in backscattered energy from the mixed layer. Efforts to limit the effect of surface reflectance by photographic differencing of two multi-spectral scanner bands were unsuccessful.

Cram, R.↗
NASA NTRS1974

Synchronous Earth Observatory Satellite /SEOS/

NASA/GSFC is currently studying the applications and technical requirements for a Synchronous Earth Observations Satellite (SEOS). Such a satellite would combine the relatively high resolution and multi-spectral capability of the Earth Resources Technology Satellite (ERTS) with the on-station continuous monitoring of the Synchronous Meteorological Satellite (SMS). SEOS capability is geared to perform disaster warning of tornadoes and floods as well as to monitor transient phenomena affecting earth resources (e.g., green waves and algae blooms). The heart of the system is a Large Earth Survey Telescope (LEST) which has a designed 1.5 meter diameter. Spectral bands in the visible, near- and far-infrared have been selected to optimize SEOS utility. A microwave sounder will be used in conjunction with the LEST for meteorological applications.

Walter, L. S.↗
NASA NTRS1975

Operational considerations for the application of remotely sensed forest data from LANDSAT or other airborne platforms

Research in the application of remotely sensed data from LANDSAT or other airborne platforms to the efficient management of a large timber based forest industry was divided into three phases: (1) establishment of a photo/ground sample correlation, (2) investigation of techniques for multi-spectral digital analysis, and (3) development of a semi-automated multi-level sampling system. To properly verify results, three distinct test areas were selected: (1) Jacksonville Mill Region, Lower Coastal Plain, Flatwoods, (2) Pensacola Mill Region, Middle Coastal Plain, and (3) Mississippi Mill Region, Middle Coastal Plain. The following conclusions were reached: (1) the probability of establishing an information base suitable for management requirements through a photo/ground double sampling procedure, alleviating the ground sampling effort, is encouraging, (2) known classification techniques must be investigated to ascertain the level of precision possible in separating the many densities involved, and (3) the multi-level approach must be related to an information system that is executable and feasible.

Baker, G. R.↗
NASA NTRS1977

Active and passive multispectral scanner for earth resources applications: An advanced applications flight experiment

The development of an experimental airborne multispectral scanner to provide both active (laser illuminated) and passive (solar illuminated) data from a commonly registered surface scene is discussed. The system was constructed according to specifications derived in an initial programs design study. The system was installed in an aircraft and test flown to produce illustrative active and passive multi-spectral imagery. However, data was not collected nor analyzed for any specific application.

Hasell, P. G., Jr.↗
NASA NTRS1977

Quaternary geologic map of Minnesota

The Quaternary Geologic Map of Minnesota is a compilation based both on the unique characteristics of satellite imagery and on the results of previous field investigations, both published and unpublished. The use of satellite imagery has made possible the timely and economical construction of this map. LANDSAT imagery interpretation proved more useful than expected. Most of the geologic units could be identified by extrapolating from specific sites where the geology had been investigated into areas where little was known. The excellent geographic registry coupled with the multi-spectral record of these images served to identify places where the geologic materials responded to their ecological environment and where the ecology responded to the geologic materials. Units were well located on the map at the scale selected for the study. Contacts between till units could be placed with reasonable accuracy. The reference points that were used to project delineations between units (rivers, lakes, hills, roads and other features), which had not been accurately located on early maps, could be accurately located with the help of the imagery. The tonal and color contrasts, the patterns reflecting geologic change and the resolution of the images permitted focusing attention on features which could be represented at the final scale of the map without distraction by other interesting but site-specific details.

Goebel, J. E.↗
NASA NTRS1977

Cluster compression algorithm: A joint clustering/data compression concept

The Cluster Compression Algorithm (CCA), which was developed to reduce costs associated with transmitting, storing, distributing, and interpreting LANDSAT multispectral image data is described. The CCA is a preprocessing algorithm that uses feature extraction and data compression to more efficiently represent the information in the image data. The format of the preprocessed data enables simply a look-up table decoding and direct use of the extracted features to reduce user computation for either image reconstruction, or computer interpretation of the image data. Basically, the CCA uses spatially local clustering to extract features from the image data to describe spectral characteristics of the data set. In addition, the features may be used to form a sequence of scalar numbers that define each picture element in terms of the cluster features. This sequence, called the feature map, is then efficiently represented by using source encoding concepts. Various forms of the CCA are defined and experimental results are presented to show trade-offs and characteristics of the various implementations. Examples are provided that demonstrate the application of the cluster compression concept to multi-spectral images from LANDSAT and other sources.

Hilbert, E. E.↗
NASA NTRS1977

Aircraft versus spacecraft for remote monitoring of water quality in U.S. coastal zones

To provide guidance for conducting future water monitoring missions over U.S. coasts, aircraft and spacecraft approaches were defined and quantitatively compared. Sensors, aircraft and spacecraft were selected from current or developmental types for the hardware concepts and monitoring was assumed to begin in 1981-1983. Comparative data are presented on capabilities and costs to monitor both recognized pollution sites and broad shelf areas. For these mission requirements, a large fleet of light aircraft provided better coverage and at lower costs generally than one spacecraft, assuming a single, multi-spectral sensor on each platform. This result could change, however, should additional useful sensors with low cost penalties be found for the spacecraft.

Darnell, W. L.↗
NASA NTRS1977

Some aspects of adaptive transform coding of multispectral data

This paper concerns a data compression study pertaining to multi-spectral scanner (MSS) data. The motivation for this undertaking is the need for securing data compression of images obtained in connection with the Landsat Follow-On Mission, where a compression of at least 6:1 is required. The MSS data used in this study consisted of four scenes: Tristate, consisting of 256 pels per row and a total of 512 rows - i.e., (256x512), (2) Sacramento (256x512), (3) Portland (256x512), and (4) Bald Knob (200x256). All these scenes were on digital tape at 6 bits/pel. The corresponding reconstructed scenes of 1 bit/pel (i.e., a 6:1 compression) are included.

Ahmed, N.↗
NASA NTRS1978

Analysis techniques for two-dimensional infrared data

In order to evaluate infrared detection and remote sensing systems, it is necessary to know the characteristics of the observational environment. For both scanning and staring sensors, the spatial characteristics of the background may be more of a limitation to the performance of a remote sensor than system noise. This limitation is the so-called spatial clutter limit and may be important for systems design of many earth application and surveillance sensors. The data used in this study is two dimensional radiometric data obtained as part of the continuing NASA remote sensing programs. Typical data sources are the Landsat multi-spectral scanner (1.1 micrometers), the airborne heat capacity mapping radiometer (10.5 - 12.5 micrometers) and various infrared data sets acquired by low altitude aircraft. Techniques used for the statistical analysis of one dimensional infrared data, such as power spectral density (PSD), exceedance statistics, etc. are investigated for two dimensional applicability. Also treated are two dimensional extensions of these techniques (2D PSD, etc.), and special techniques developed for the analysis of 2D data.

Winter, E. M.↗
NASA NTRS1979

Contamination effects from materials selected for spacecraft instruments

Measurements of the Total Mass Loss (TML) and the Collected Volatile Condensable Materials (CVCM) are used as a guide for selecting those materials being low in outgassing. A contamination modelling method utilizing the data and also the rate at which a material outgasses in a system with a known conductance has been developed and has been applied to the problem encountered with the Very High Resolution Radiometer (VHRR). Recently, the contamination model has been applied to the problem with the 5th band of the Multi-Spectral Scanner on the Landsat-C satellite. In the MSS design, the volumes involved and their respective conductance in a molecular flow field demonstrated that the water vapor adsorbed and absorbed by an epoxy paint was being pumped off and re-ad(b)sorbed, with a resultant very slow loss of water during each degassing temperature cycle of the instrument's cooler. Recommendations for designing improved coolers are presented.

Heslin, T. M.↗