Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “motion profiles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

New Report Highlights LAMP's Role as a Robust and Reliable System for Wave Energy Converter Testing

Harnessing the power of waves requires more than just putting devices in the ocean - it takes tools that can refine and accelerate innovation before the first deployment. That's where NLR's largeamplitude motion platform, or LAMP, comes in. LAMP is a six-degree-of-freedom motion system designed to replicate the response of a wave energy converter (WEC) device in realistic ocean conditions. By letting researchers evaluate WEC performance in a safe, controlled lab environment before moving offshore, LAMP helps accelerate innovation while reducing risk. An NLR report, titled Initial Characterization of the NLR LargeAmplitude Motion Platform (https://www.nrel.gov/docs/fy26osti/93733.pdf), provides a deeper understanding of LAMP's capabilities and also lays the groundwork for future advancements in WEC testing methodologies. Researchers studied LAMP's amplitude and frequency limits across different payloads and collected data from 16 test profiles. Testing demonstrated that platform accuracy remained consistent across all payloads evaluated; researchers expect similar accuracy up to LAMP's 10,000-kilogram capacity limit. The measured position limits for single degrees of freedom experienced by WECs, including surge, sway, heave, roll, pitch, and yaw, also exceeded the original manufacturer specifications, providing new insight into the true boundaries of the system.

16 TIDAL AND WAVE POWER↗
DOE OSTI2025

WFIP3 - SHIP site - NREL Profiling Lidar (Windcube v2.1) / Reviewed data

This dataset contains reviewed data from the profiling lidar (Windcube v2.1) deployed on WFIP3's SHIP. The reviewed files herein are based on the lidar's RTD files (i.e., the real-time raw data files at near 1 Hz resolution). The data have been corrected for the motion of the ship.

17 WIND ENERGY↗
DOE OSTI2025

WFIP3 - BARG site - NREL Profiling Lidar (Windcube v2.1) / Reviewed Data

This dataset contains reviewed data from the profiling lidar (Windcube v2.1) deployed on WFIP3's barge. The reviewed files herein are based on the lidar's RTD files (i.e., the real-time raw data files at near 1 Hz resolution). The data have been corrected for the motion of the ship.

17 WIND ENERGY↗
DOE OSTI2025

WFIP3 - BARG site - NREL Profiling Lidar (Windcube v2.1) / Derived Data

This dataset contains derived data from the profiling lidar (Windcube v2.1) deployed at WFIP3's BARG. The derived data files herein are based on the lidar's STA files (i.e., the 10-min average data files). Note: this version of the data has been corrected to account for the motion of the barge.

17 WIND ENERGY↗
DOE OSTI2024

Forming a database to study reversed magnetic shear from the National Spherical Torus eXperiment using machine learning

Achieving a long-lived reversed magnetic shear (RMS) target plasma in the National Spherical Torus eXperiment Upgrade will require developing various sustainment scenarios. To help with the ongoing plasma control efforts, the development of a new analysis for the motional Stark effect (MSE) diagnostic using a machine learning algorithm, namely, MSE-ML, is described. MSE-ML will be used to identify patterns during RMS discharges, some of which suffer magnetohydrodynamic (MHD) events resulting in current redistribution and monotonic q-profiles. A database consisting of q and magnetic shear profiles is being constructed primarily based on the existing National Spherical Torus eXperiment data with equilibrium reconstructions constrained by the magnetic field pitch angle profile measured using the multi-channel MSE diagnostic. An unsupervised k-means clustering of the data is developed to study the RMS formation as a function of time. The initial clustering from the q-profiles shows significant differences in both amplitude and the duration of the RMS period. As a goal, the clustering results that detect and distinguish shots with substantial and sustained RMS are to be used as a preprocessing step in a supervised algorithm to identify the underlying conditions that lead to long-lasting improved confinement with RMS. Another aim of the MSE-ML study is to identify precursors of RMS-destroying MHD events in either derived data such as the q-profile or directly measured data such as the magnetic field pitch angle profile.

Uzun-Kaymak, I. U. (ORCID:0000000276251493)↗
DOE OSTI2025

Large-scale tearing-mode hazard function analysis with standard matched equilibrium reconstructions

The association between features from standard tokamak equilibrium reconstructions and the onset of n = 1 tearing modes (TMs) is analyzed at scale. The TM onset rate is directly modeled with a ‘hazard’ function which gives the expected number of onsets (per unit time spent) in a given equilibrium parameter region. In particular the different statistical modeling performance achieved for magnetics-only reconstructions and motional Stark effect (MSE) enhanced reconstructions is studied. It is observed that a better hazard model for the TM onset rate can be built with the MSE-enhanced equilibria compared to the matched magnetics-only situation. This advantage disappears if internal profile details are withheld from the matched analysis. Plausibility of the hazard function is further demonstrated with visualizations of global trends in the operational space, and time-traces from specific tokamak discharges. As a result, TMs typically degrade tokamak plasma performance and may lead to plasma termination, motivating this statistical study.

equilibrium↗
DOE OSTI2025

WFIP3 - BARG site - NREL Profiling Lidar (Windcube v2.1) / Raw Data

This dataset contains raw data from NREL's profiling lidar (Windcube v2.1) at the WFIP3 BARG site. Two data types are included here: 1) STA files, which have 10-minute average data, and 2) RTD files, which have real time data, at about 1 Hz resolution. Note: these data have NOT been corrected for the motion of the barge.

17 WIND ENERGY↗
DOE OSTI2025

Mapping Spatiotemporal Solvent Velocity from Measured Concentration Gradients in a Polarized Electrolyte

The electric-field induced motion of neutral species impedes the efficacy of electrochemical devices. By combining operando X-ray transmission measurements with continuum mechanics, we have developed a methodology for determining the velocity of neutral solvent molecules under an applied field. The X-ray transmission experiments were used to determine ion concentration profiles as a function of space and time in a polymer electrolyte. The unsteady state solvent mass balance equation was solved numerically with experimental concentration profiles to map spatiotemporal solvent velocities. We compare our experimentally derived results with predictions made with concentrated solution theory. We use the cation transference number as the only adjustable parameter to match experimental measurements of both concentration and solvent velocity. Our approach may be used to determine solvent velocity with any operando technique used to measure time-dependent ion concentration profiles.

Abdo, Emily E↗
DOE OSTI2024

The motional Stark effect diagnostic for ITER

An overview of the plans for the motional Stark effect (MSE) diagnostic installation on the International Thermonuclear Experimental Reactor (ITER) is presented. The MSE diagnostic uniquely provides spatially localized magnetic field measurements inside the plasma. These are used to constrain equilibrium reconstructions to determine q(r), the safety factor as a function of minor radius. Meeting the system requirements to deliver q-profiles and related quantities with the specified radial resolution of 20 points over the minor radius, 10 ms time resolution, and better than 10% accuracy is challenging. MSE systems observe the D/H-α emission near 656.3 nm from neutral beams. As the beam atoms traverse the magnetic field, B⃗, at high velocity, v⃗, they experience a Lorentz electric field, v⃗×B⃗, which causes the spectral emission to be split and polarized due to the Stark effect. Traditional MSE-LP (line polarization) measurements determine the direction of the magnetic field in the observation volume using polarimetric analysis of the detected light. The harsh conditions of ITER are expected to deposit thin films of contaminants on the first mirror, which would alter the polarization state of reflected light significantly. On ITER, the combination of high magnetic field strength and high energy beams makes the Stark spectrum resolution suitable for the determination of the magnetic field magnitude from the line shift, so this approach has been selected. Every aspect of the measurement system must be planned for the burning plasma environment and carefully analyzed ahead of time. Current status and plans for the system are presented.

Instruments & Instrumentation↗
DOE OSTI2024

Characterizing Mesoscale Cellular Convection in Marine Cold Air Outbreaks With a Machine Learning Approach

Abstract During marine cold‐air outbreaks (MCAOs), when cold polar air moves over warmer ocean, a well‐recognized cloud pattern develops, with open or closed mesoscale cellular convection (MCC) at larger fetch over open water. The Cold‐Air Outbreaks in the Marine Boundary Layer Experiment provided a comprehensive set of ground‐based in situ and remote sensing observations of MCAOs at a coastal location in northern Norway. MCAO periods that unambiguously exhibit open or closed MCC are determined. Individual cells observed with a profiling Ka‐band radar are identified using a watershed segmentation method. Using self‐organizing maps (SOMs), these cells are then objectively classified based on the variability in their vertical structure. The SOM nodes contain some information about the location of the cell transect relative to the center of the MCC. This adds classification noise, requiring numerous cell transects to isolate cell dynamical information. The SOM‐based classification shows that comparatively intense convection occurs only in open MCC. This convection undergoes an apparent lifecycle. Developing cells are associated with stronger updrafts, large spectrum width, larger amounts of liquid water, lower surface precipitation rates, and lower cloud tops than mature and weakening cells. The weakening of these cells is associated with the development of precipitation‐induced cold pools. The SOM classification also reveals less intense convection, with a similar lifecycle. More stratiform vertical cloud structures with weak vertical motions are common during closed MCC periods and are separated into precipitating and non‐precipitating stratiform cores. Convection is observed only occasionally in the closed MCC environment.

Meteorology & Atmospheric Sciences↗
DOE OSTI2025

Conformational free energy landscape of a glutamate transporter and microscopic details of its transport mechanism

Removing glutamate from the synaptic cleft is vital for proper function of the brain. Excitatory amino acid transporters mediate this process by uptaking the neurotransmitter from the synaptic cleft back to the cell after its release. The archaeal homolog, Glt Ph , an aspartate transporter fromPyrococcus horikoshii, presents the best structurally characterized model for this family of transporters. In order to transport, Glt Ph undergoes elevator-like conformational changes between inward-facing (IF) and outward-facing (OF) states. Here, we characterize, at an atomic level, the OF⇌IF transition of Glt Ph in differentapo/bound states using a combination of ensemble-based enhanced sampling techniques, employing more than two thousand of coupled simulation replicas of membrane-embedded Glt Ph . The resulting free-energy profiles portray the transition ofapo/bound states as a complex four-stage process, while sodium binding alone locks the structure in one of its states. Along the transition, the transport domain (TD) disengages from the scaffold domain (SD), allowing it to move as a piston sliding vertically with respect to the membrane during the elevator-like motion of TD. Lipid interactions with residues comprising the SD–TD interface directly influence the large-scale conformational changes and, consequently, the energetics of transport. Structural intermediates formed during the transition leak water molecules and may correlate to the uncoupled Cl − ion conductance observed experimentally in both prokaryotic and mammalian glutamate transporters. Mechanistic insights obtained from our study provide a structural framework for better development of therapeutic for neurological disorders.

Science & Technology - Other Topics↗
DOE OSTI2025

First Temperature Profile of a Stellar Flare Using Differential Chromatic Refraction

We present the first derivation of a stellar flare temperature profile from single-band photometry. Stellar flare DWF 030225.574−545707.45129 was detected in 2015 by the Dark Energy Camera as part of the Deeper, Wider, Faster program. The brightness (Δm g = −6.12) of this flare, combined with the high air mass (1.45 ≲ X ≲ 1.75) and blue filter (DES g, 398–548 nm) in which it was observed, provided ideal conditions to measure the zenithward apparent motion of the source due to differential chromatic refraction (DCR) and, from that, infer the effective temperature of the event. We model the flare’s spectral energy distribution as a blackbody to produce the constraints on flare temperature and geometric properties derived from single-band photometry. We additionally demonstrate how simplistic assumptions on the flaring spectrum, as well as on the evolution of flare geometry, can result in solutions that overestimate the effective temperature. Exploiting DCR enables studying chromatic phenomena with ground-based astrophysical surveys, and stellar flares on M dwarfs are a particularly enticing target for such studies due to their ubiquity across the sky and the heightened color contrast between their red quiescent photospheres and the blue flare emission. Our novel method will enable similar temperature constraints for a large sample of objects in upcoming photometric surveys like the Vera C. Rubin Legacy Survey of Space and Time.

Clarke, Riley W. [University of Delaware, Newark, ↗
DOE OSTI2025

Bayesian Inference for the Seismic Moment Tensor Using Regional Waveforms and Teleseismic- P Polarities with a Data-Derived Distribution of Velocity Models and Source Locations

The largest source of uncertainty in any source inversion is the velocity model used in the transfer function that relates observed ground motion to the seismic moment tensor. However, standard inverse procedure often does not quantify uncertainty in the seismic moment tensor due to error in the Green’s functions from uncertain event location and Earth structure. Here, we incorporate this uncertainty into an estimation of the seismic moment tensor using a data-derived distribution of velocity models based on complementary geophysical data sets, including thickness constraints, velocity profiles, gravity data, surface-wave group velocities, and regional body-wave travel times. The data-derived distribution of velocity models is then used as a prior distribution of Green’s functions for use in Bayesian inference of an unknown seismic moment tensor using regional and teleseismic-P waveforms. The use of multiple data sets is important for gaining resolution to different components of the moment tensor. The combined likelihood is estimated using data-specific error models and the posterior of the seismic moment tensor is estimated and interpreted in terms of the most probable source type.

58 GEOSCIENCES↗
DOE OSTI2024

Prototyping of a Rotary Triboelectric Nanogenerator for Power at Sea

Increasing at-sea power generation by Triboelectric Nanogenerator (TENG) energy harvesters towards the order of 1-Watt will create significant opportunities to power ocean observation buoys and distributed sensor nodes by extending mission time and increasing sensor payload. Of the many possible configurations of harvesting wave energy with TENGs, we document the rationale for choosing and developing a rotary TENG that operates by the freestanding mode. The rotary TENG prototype consists of two plates, a rotor and a stator, to take advantage of the various mechanisms of converting wave action into rotational motion. We have constructed a testing apparatus that allows us to vary several key parameters of the device: distance between rotor and stator, triboelectric material, rotational speed, number of electrodes and output load impedance. Preliminary results show that when driven at a constant 500 rpm, we can achieve a power density of 0.7 W/m3. A variable speed motor drives the rotor, which can be driven using a velocity profile informed by the equivalent to the output from a wave energy converter (WEC). The optimized rotational TENG can be stacked and driven by a single shaft, increasing the energy density of the device. The output of such a TENG could be used to power devices in the ocean at a low cost and high durability.

electrostatic generator↗
DOE OSTI2025

Laboratory Testing to Assess the Feasibility of Polyurethane Flat Belts for Marine Energy Applications

Polyurethane flat belts have received limited scientific attention as load-bearing elements in marine energy systems, particularly in applications involving dynamic tensile and bending loads. This study evaluates their potential as a replacement for traditional wire ropes in marine energy applications, with a focus on their ability to be integrated into winch-driven wave energy converters where bending and tensile stresses can make long-term operation difficult. Polyurethane belts are hypothesized to offer enhanced fatigue resistance due to their reduced thickness in the bending plane and therefore lower bending stresses. This research involves a series of tests utilizing the National Renewable Energy Laboratory’s (NREL) Large-Amplitude Motion Platform to replicate the dynamic conditions experienced by mooring lines of winch-based point-absorber-type marine energy converters. The conditions tested include unequal coiling and uncoiling tensions and load cases resulting from the device’s unconstrained movement relative to its anchor, such as twisting and off-axis loading. Results from this study show that polyurethane flat belts can achieve more than 198 percent of the fatigue life of a conventional wire rope under similar load profiles. The stress concentrations resulting from off-axis loading and cumulative twist beyond the system’s allowable limits have been identified as potential failure modes for flat belt mooring lines used in winch-driven wave energy converters deployed in ocean environments. To mitigate these risks, the use of anti-spin systems and fairleads designed to accommodate off-axis loading while limiting twist accumulation is recommended.

13 HYDRO ENERGY↗