Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “motion correction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Investigation of the aeroelastic stability of the AFW wind-tunnel model using CAP-TSD

The Computational Aeroelasticity Program - Transonic Small Disturbance (CAP-TSD) code, developed at the NASA Langley Research Center, is applied to the Active Flexible Wing (AFW) wind tunnel model for prediction of the model's transonic aeroelastic behavior. A semi-span computational model is used for evaluation of symmetric motions and a full span model is used for evaluation of antisymmetric motions. Static aeroelastic solutions using CAP-TSD are computed. Dynamic (flutter) analyses are then performed as perturbations about the static aeroelastic deformations and presented as flutter boundaries in terms of Mach number and dynamic pressure. Flutter boundaries that take into account modal refinements, vorticity and entropy corrections, antisymmetric motions and sensitivity to the modeling of the wing tip ballast stores are also presented and compared with experimental flutter results.

Silva, Walter A.↗
NASA NTRS1992

Investigation of the aeroelastic stability of the AFW wind-tunnel model using CAP-TSD

The Computational Aeroelasticity Program - Transonic Small Disturbance (CAP-TSD) code is applied to the Active Flexible Wing (AFW) wind tunnel model for prediction of the model's transonic aeroelastic behavior. A semi-span computational model is used for evaluation of symmetric motions and a full span model is used for evaluation of antisymmetric motions. Static aeroelastic solutions using CAP-TSD are computed. Dynamic flutter analyses are then performed as perturbations about the static aeroelastic deformations and presented as flutter boundaries in terms of Mach number and dynamic pressure. Flutter boundaries that take into account modal refinements, vorticity, and entropy corrections, antisymmetric motions and sensitivity to the modeling of the wing tip ballast stores are also presented and compared with experimental flutter results.

Silva, Walter A.↗
NASA NTRS1992

Further investigations of the aeroelastic behavior of the AFW wind-tunnel model using transonic small disturbance theory

The CAP-TSD (Computational Aeroelasticity Program - Transonic Small Disturbance) code, developed at the NASA Langley Research Center, is applied to the Active Flexible Wing wind-tunnel model for prediction of transonic aeroelastic behavior. A semi-span computational model is used for evaluation of symmetric motions, and a full-span model is used for evaluation of antisymmetric motions. Static aeroelastic solutions using CAP-TSD are computed. Dynamic (flutter) analyses then are performed as perturbations about the static aeroelastic deformations and presented as flutter boundaries in terms of Mach number and dynamic pressure. Flutter boundaries that take into account modal refinements, vorticity and entropy corrections, antisymmetric motions and sensitivity to the modeling of the wing tip ballast stores also are presented and compared with experimental flutter results.

Silva, Walter A.↗
NASA NTRS1998

Efficient dynamic constraints for animating articulated figures

This paper presents an efficient dynamics-based computer animation system for simulating and controlling the motion of articulated figures. A non-trivial extension of Featherstone's O(n) recursive forward dynamics algorithm is derived which allows enforcing one or more constraints on the animated figures. We demonstrate how the constraint force evaluation algorithm we have developed makes it possible to simulate collisions between articulated figures, to compute the results of impulsive forces, to enforce joint limits, to model closed kinematic loops, and to robustly control motion at interactive rates. Particular care has been taken to make the algorithm not only fast, but also easy to implement and use. To better illustrate how the constraint force evaluation algorithm works, we provide pseudocode for its major components. Additionally, we analyze its computational complexity and finally we present examples demonstrating how our system has been used to generate interactive, physically correct complex motion with small user effort.

NASA Discipline Space Human Factors↗
NASA NTRS2002

Human motion planning based on recursive dynamics and optimal control techniques

This paper presents an efficient optimal control and recursive dynamics-based computer animation system for simulating and controlling the motion of articulated figures. A quasi-Newton nonlinear programming technique (super-linear convergence) is implemented to solve minimum torque-based human motion-planning problems. The explicit analytical gradients needed in the dynamics are derived using a matrix exponential formulation and Lie algebra. Cubic spline functions are used to make the search space for an optimal solution finite. Based on our formulations, our method is well conditioned and robust, in addition to being computationally efficient. To better illustrate the efficiency of our method, we present results of natural looking and physically correct human motions for a variety of human motion tasks involving open and closed loop kinematic chains.

Non-NASA Center↗
NASA NTRS1989

Nonlinear strain-displacement relations and flexible multibody dynamics

Dynamics of chains of flexible bodies undergoing large rigid body motions, but small elastic deflections are considered. The role of nonlinear strain-displacement relations in the development of the motion equations correct to first order in elastic deflections is investigated. The general form of these equations linearized only in the small elastic deflections is presented, and the relative significance of various nonlinear terms is studied both analytically and through the use of the numerical simulations. Numerical simulations are performed for a two link chain constrained to move in the plane, subject to hinge torques. Each link is modeled as a thin beam. Slew maneuver simulation results are compared for models with and without properly modeled kinematics of deformation. The goal of this case study is to quantify the importance of the terms in the equations of motion which arise from the inclusion of nonlinear strain-displacement relations. It is concluded that unless the consistently linearized equations in elastic deflections and speeds are available and necessary, the inconsistently (prematurely) linearized equations should be replaced in all cases by ruthlessly linearized equations: equations in which all nonlinear terms involving the elastic deflections and speeds are ignored.

Padilla, Carlos E.↗
NASA NTRS1981

The prediction of normal force and rolling moment coefficients for a spinning wing

Nonlinear airfoil section data for angles of attack from 0 to 180 deg were used in a small computer code to numerically integrate the section normal force coefficients along the span as a function of the local velocity and angle of attack resulting from the combined spinning and descending motion. A correction was developed to account for the radial pressure gradient in the separated, rotating flow region above the wing. This correction was found to be necessary in order to obtain agreement, both in form and magnitude, with rotary balance test data.

Mccormick, B. W.↗
NASA NTRS1981

Pinhole-coronograph tracking control

The pinhole occulter system, a space shuttle based experiment for the production of hard X-ray images taken primarily from the Sun is described. The system is a pinhole camera utilizing a deployable 50 m flexible boom for separating the pinhole from the recording devices located in the shuttle. The system is subjected to the disturbances of the shuttle. The worst of these are thruster firing for orbit correction, man motion, motion induced by other systems, and gravity gradient torques. The control system of the pointing mount senses both position and velocity of the mask tip and uses these to estimate accurately the flexible modes of the system.

Greene, M.↗
NASA NTRS1985

On the orientation of ephemeris reference frames

Precession corrections, equinox motions and locations, and obliquities for the FK4 are determined from laser-ranging data only by the ephemeris-fitting method of Standish (1982) and compared with those calculated by Fricke (1971 and 1982) from optical observations. The theoretical basis of the comparison is explained, and the results are presented in a table. No significant differences are found in the equinox offset and equinox motion values, and good agreement is found in the equinox location. The ephemeris-fitting obliquity values are shown to be consistent to within 10 marcsec and to be about 20 marcsec lower than the optical values.

Standish, E. M., Jr.↗
NASA NTRS1989

On the dynamic singularities in the control of free-floating space manipulators

It is shown that free-floating space manipulator systems have configurations which are dynamically singular. At a dynamically singular position, the manipulator is unable to move its end effector in some direction. This problem appears in any free-floating space manipulator system that permits the vehicle to move in response to manipulator motion without correction from the vehicle's attitude control system. Dynamic singularities are functions of the dynamic properties of the system; their existence and locations cannot be predicted solely from the kinematic structure of the manipulator, unlike the singularities for fixed base manipulators. It is also shown that the location of these dynamic singularities in the workplace is dependent upon the path taken by the manipulator in reaching them. Dynamic singularities must be considered in the control, planning and design of free-floating space manipulator systems. A method for calculating these dynamic singularities is presented, and it is shown that the system parameters can be selected to reduce the effect of dynamic singularities on a system's performance.

Papadopoulos, E.↗
NASA NTRS1990

Nonlinear slew maneuver dynamics of large flexible spacecrafts

In this paper, the dynamics of three-dimensional, large-angle arbitrary slew maneuvers of a large flexible spacecraft are developed. The dynamical equations obtained allow maneuver specifications about any axis and are highly nonlinear. They also include coupling between the rigid orbiter and the flexible appendage and correction for motion stiffness. A decentralized control scheme is utilized for performing the maneuver of the rigidized body and for vibration suppression of the flexible appendage. The method developed in this paper is further applied to NASA Spacecraft Control Laboratory Experiment (SCOLE) test facility.

Kakad, Y. P.↗
NASA NTRS1993

Stress stiffening and approximate equations in flexible multibody dynamics

A useful model for open chains of flexible bodies undergoing large rigid body motions, but small elastic deformations, is one in which the equations of motion are linearized in the small elastic deformations and deformation rates. For slow rigid body motions, the correctly linearized, or consistent, set of equations can be compared to prematurely linearized, or inconsistent, equations and to 'oversimplified,' or ruthless, equations through the use of open loop dynamic simulations. It has been shown that the inconsistent model should never be used, while the ruthless model should be used whenever possible. The consistent and inconsistent models differ by stress stiffening terms. These are due to zeroth-order stresses effecting virtual work via nonlinear strain-displacement terms. In this paper we examine in detail the nature of these stress stiffening terms and conclude that they are significant only when the associated zeroth-order stresses approach 'buckling' stresses. Finally it is emphasized that when the stress stiffening terms are negligible the ruthlessly linearized equations should be used.

Padilla, Carlos E.↗
NASA NTRS1992

Controlling flexible robot arms using a high speed dynamics process

Described here is a robot controller for a flexible manipulator arm having plural bodies connected at respective movable hinges, and flexible in plural deformation modes. It is operated by computing articulated body qualities for each of the bodies from the respective modal spatial influence vectors, obtaining specified body forces for each of the bodies, and computing modal deformation accelerations of the nodes and hinge accelerations of the hinges from the specified body forces, from the articulated body quantities and from the modal spatial influence vectors. In one embodiment of the invention, the controller further operates by comparing the accelerations thus computed to desired manipulator motion to determine a motion discrepancy, and correcting the specified body forces so as to reduce the motion discrepancy. The manipulator bodies and hinges are characterized by respective vectors of deformation and hinge configuration variables. Computing modal deformation accelerations and hinge accelerations is carried out for each of the bodies, beginning with the outermost body by computing a residual body force from a residual body force of a previous body, computing a resultant hinge acceleration from the body force, and then, for each one of the bodies beginning with the innermost body, computing a modal body acceleration from a modal body acceleration of a previous body, computing a modal deformation acceleration and hinge acceleration from the resulting hinge acceleration and from the modal body acceleration.

Jain, Abhinandan↗
NASA NTRS1996

Controlling Flexible Robot Arms Using High Speed Dynamics Process

A robot manipulator controller for a flexible manipulator arm having plural bodies connected at respective movable hinges and flexible in plural deformation modes corresponding to respective modal spatial influence vectors relating deformations of plural spaced nodes of respective bodies to the plural deformation modes, operates by computing articulated body quantities for each of the bodies from respective modal spatial influence vectors, obtaining specified body forces for each of the bodies, and computing modal deformation accelerations of the nodes and hinge accelerations of the hinges from the specified body forces, from the articulated body quantities and from the modal spatial influence vectors. In one embodiment of the invention, the controller further operates by comparing the accelerations thus computed to desired manipulator motion to determine a motion discrepancy, and correcting the specified body forces so as to reduce the motion discrepancy. The manipulator bodies and hinges are characterized by respective vectors of deformation and hinge configuration variables, and computing modal deformation accelerations and hinge accelerations is carried out for each one of the bodies beginning with the outermost body by computing a residual body force from a residual body force of a previous body and from the vector of deformation and hinge configuration variables, computing a resultant hinge acceleration from the body force, the residual body force and the articulated hinge inertia, and revising the residual body force modal body acceleration.

Jain, Abhinandan↗
NASA NTRS1981

Astrolabe observations of Mars

A previously reported bias in the right ascension residuals of astrolabe observations of Mars is removed by correcting for equinox motion and relating the observations to the Jet Propulsion Laboratory's planetary ephemeris, DE111. The remaining residuals show a 'phase effect', the magnitude of which is solved for and compared with that previously found for meridian transit observations. The final residuals reveal no significant offset in either right ascension or declination. In modifying the residuals, use is also made of Fricke's (1980) correction for the motion of the FK 4 equinox.

Standish, E. M.↗
NASA NTRS1997

Applying Space Technology to Enhance Control of an Artificial Arm

At the present time, myoelectric prostheses perform only one function of the hand: open and close with the thumb, index and middle finger coming together to grasp various shaped objects. To better understand the limitations of the current single-function prostheses and the needs of the individuals who use them, The Institute for Rehabilitation and Research (TIRR), sponsored by the National Institutes of Health (August 1992 - November 1994), surveyed approximately 2500 individuals with upper limb loss. When asked to identify specific features of their current electric prosthesis that needed improvement, the survey respondents overwhelmingly identified the lack of wrist and finger movement as well as poor control capability. Simply building a mechanism with individual finger and wrist motion is not enough. Individuals with upper limb loss tend to reject prostheses that require continuous visual monitoring and concentration to control. Robotics researchers at NASA's Johnson Space Center (JSC) and Rice University have made substantial progress in myoelectric teleoperation. A myoelectric teleoperation system translates signals generated by an able-bodied robot operator's muscles during hand motions into commands that drive a robot's hand through identical motions. Farry's early work in myoelectric teleoperation used variations over time in the myoelectric spectrum as inputs to neural networks to discriminate grasp types and thumb motions. The resulting schemes yielded up to 93% correct classification on thumb motions. More recently, Fernandez achieved 100% correct non-realtime classification of thumb abduction, extension, and flexion on the same myoelectric data. Fernandez used genetic programming to develop functions that discriminate between thumb motions using myoelectric signal parameters. Genetic programming (GP) is an evolutionary programming method where the computer can modify the discriminating functions' form to improve its performance, not just adjust numerical coefficients or weights. Although the function development may require much computational time and many training cases, the resulting discrimination functions can run in realtime on modest computers. These results suggest that myoelectric signals might be a feasible teleoperation medium, allowing an operator to use his or her own hand and arm as a master to intuitively control an anthropomorphic robot in a remote location such as outer space.

Atkins, Diane↗