Localized engineering of grain boundary morphology by electro-nano-pulsing processing
Not Available
Materials Science↗
SEARCH · Engineering Papers
Results for “morphology engineering”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Morphology and Crystallinity Effects of Nanochanneled Niobium Oxide Electrodes for Na-Ion Batteries
Niobium pentoxide (Nb 2 O 5 ) is a promising negative electrode for sodium ion batteries (SIBs). By engineering the morphology and crystallinity of nanochanneled niobium oxides (NCNOs) the kinetic behavior and charge storage mechanism of Nb 2 O 5 electrodes were investigated. Amorphous and crystalline NCNO samples were made by modulating anodization conditions (20 - 40V and 140 - 180 °C) to synthesize nanostructures of differing pore sizes and wall thicknesses with identical chemical composition. The electrochemical energy storage properties of the NCNOs were studied with the amorphous samples showing better overall rate performance than the crystalline samples. The enhanced rate performance of the amorphous samples is attributed to the higher capacitive contributions and Na-ion diffusivity analyzed from cyclic voltammetry (CV) and galvanostatic intermittent titration technique (GITT). It was found that the amorphous samples with smaller wall thicknesses facilitated improved kinetics. Among samples with similar pore size and wall thickness, the difference in their power performance stems from crystallinity effect, which plays a more significant role in the resulting kinetics of the materials for Na-ion batteries.
25 ENERGY STORAGE↗
Impacts of Curing-Induced Phase Segregation in Silicon Nanoparticle-Based Electrodes
We report the investigation of silicon nanoparticle composite anodes for Li-ion batteries, using a combination of two nm-scale atomic force microscopy-based techniques: scanning spreading resistance microscopy for electrical conduction mapping and contact resonance and force volume for elastic modulus mapping, along with scanning electron microscopy-based energy dispersion spectroscopy, nanoindentation, and electrochemical analysis. Thermally curing the composite anode—made of polyethylene oxide-treated Si nanoparticles, carbon black, and polyimide binder—reportedly improves the anode electrochemical performance significantly. This work demonstrates phase segregation resulting from thermal curing, where alternating bands of carbon and silicon active material are observed. This electrode morphology is retained after extensive cycling, where the electrical conduction of the carbon-rich bands remains relatively unchanged, but the mechanical modulus of the bands decreases distinctly. These electrical and mechanical factors may contribute to performance improvement, with carbon bands serving as a mechanical buffer for Si deformation and providing electrical conduction pathways. This work motivates future efforts to engineer similar morphologies for mitigating capacity loss in silicon electrodes.
25 ENERGY STORAGE↗
Bidentate Ligand-Induced Oriented Transformation of CsPbBr 3 Perovskite Nanocrystals into Nanowires for X-ray Photodetectors
We report shape and dimensionality control by ligands is an efficient way to fabricate high-quality perovskite nanocrystals (NCs) with optoelectronic properties. Herein, to realize oriented transformations between different morphologies of CsPbBr 3 nanocrystals, we conceived of the use of defects and bidentate ligands to synergistically drive the reorientation of CsPbBr3nanocrystals into CsPbBr 3 nanowires (NWs). By employing aminocaproic acid as the bidentate ligand, CsPbBr 3 NWs were reconstructed from the CsPbBr 3 NCs (~7 nm) with 20-60 nm in width and several micrometers in length, as well as a 527 nm photoluminescence (PL) peak, 59% PL quantum yield, and 98.5 ns PL lifetime. The bidentate ligand-directed anisotropic shape evolution and growth of perovskite NWs from NCs was elucidated by transmission electronmicroscopy and PL studies. The photodetectors fabricated with the reconstructed CsPbBr 3 NWs displayed a photocurrent enhancement (2.75 × 10 -11 A) compared with that of the devices based on solution-synthesized NWs (2.28 × 10 -11 A). The device also showed a short response time, indicating its more sensitive photoelectric response. This process provides a viable approach to engineering diverse morphologies of perovskite nanocrystals for optoelectronic applications.
36 MATERIALS SCIENCE↗
Metal‐Organic Framework (MOF) Morphology Control by Design
Abstract Exerting morphological control over metal‐organic frameworks (MOFs) is critical for determining their catalytic performance and to optimize their packing behavior in areas from separations to fuel gas storage. A mechanism‐based approach to tailor the morphology of MOFs is introduced and experimentally demonstrated for five cubic Zn 4 O‐based MOFs. This methodology provides three key features: 1) computational screening for selection of appropriate additives to change crystal morphology based on knowledge of the crystal structure alone; 2) use of additive to metal cluster geometric relationships to achieve morphologies expressing desired crystallographic facets; 3) potential for suppression of interpenetration for certain phases.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Copper(I) photosensitizer-silica nanoparticle assembly towards enhanced aqueous photoluminescence
Harnessing the luminescence potential of Cu(I) complexes in aqueous media is typically hindered by their poor photostability and altered properties. Here, we report the synthesis, engineering and morphological characterization of a hydrophobic homoleptic copper(I) complex entrapped into silica nanoparticles, Cu-I@SiO 2 (where “Cu-I” designates [Cu(2,9-diiodo-1,10-phenanthroline) 2 ] + ), as a promising stabilisation strategy towards water-compatible, Cu(I) complex-based luminescence. The polyether chain-decorated nano-objects are spherical with an average diameter of ca. 10.8 ± 1.9 nm. Upon dispersion in water, clear solution-like suspensions were obtained. Significantly, the aqueous suspensions photo-luminesce (Φ em = 5×10 -4 ) upon excitation through the Metal-to-Ligand Charge-Transfer transition (MLCT) of the embedded copper(I) complexes. In contrast, the corresponding silica-free molecular complex dissolved in an aqueous environment revealed fully quenched emission. Finally, the use of Cu-I@SiO 2 suspensions as luminescent probes is reported, first by assessing their potential use as electrochemiluminescent probes, and second by monitoring the photoluminescence from Cu-I@SiO 2 in the presence of whole blood.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Organic Modulators Enable Morphological Diversity in Colloidal Crystals Engineered with DNA
Colloidal crystal engineering with DNA is a powerful way of generating a wide variety of crystals spanning over 90 different symmetries. However, in many cases, crystals with well-defined habits are difficult, if not impossible, to make, in part due to rapid crystal defect formation and propagation. This is especially true in the case of face-centered cubic (FCC) structures. Herein, we report a strategy that uses formamide as a chemical modulator to slow down colloidal crystal growth, which decreases defect formation and yields higher-quality crystals. Formamide forms hydrogen bonds with DNA bases and destabilizes the DNA duplex; in the context of colloidal crystallization, formamide leads to the disassembly of undercoordinated particles (defect architectures) and facilitates their reassembly into structures with the maximum number of nearest-neighbor contacts and DNA bonds. Here, when targeting an FCC lattice comprised of DNA-modified spherical 20 nm particles, formamide promotes the formation of its Wulff polyhedron (a truncated octahedron), never observed before in colloidal crystal engineering with DNA. Importantly, kinetic habits, including tetrahedra, octahedra, icosahedra, and decahedra, are also observed depending on formamide concentration.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Observation of formation and local structures of metal-organic layers via complementary electron microscopy techniques
Abstract Metal-organic layers (MOLs) are highly attractive for application in catalysis, separation, sensing and biomedicine, owing to their tunable framework structure. However, it is challenging to obtain comprehensive information about the formation and local structures of MOLs using standard electron microscopy methods due to serious damage under electron beam irradiation. Here, we investigate the growth processes and local structures of MOLs utilizing a combination of liquid-phase transmission electron microscopy, cryogenic electron microscopy and electron ptychography. Our results show a multistep formation process, where precursor clusters first form in solution, then they are complexed with ligands to form non-crystalline solids, followed by the arrangement of the cluster-ligand complex into crystalline sheets, with additional possible growth by the addition of clusters to surface edges. Moreover, high-resolution imaging allows us to identify missing clusters, dislocations, loop and flat surface terminations and ligand connectors in the MOLs. Our observations provide insights into controllable MOL crystal morphology, defect engineering, and surface modification, thus assisting novel MOL design and synthesis.
36 MATERIALS SCIENCE↗
Engineering endosomolytic nanocarriers of diverse morphologies using confined impingement jet mixing
The clinical translation of many biomolecular therapeutics has been hindered by undesirable pharmacokinetic (PK) properties, inadequate membrane permeability, poor endosomal escape and cytosolic delivery, and/or susceptibility to degradation. Overcoming these challenges merits the development of nanoscale drug carriers (nanocarriers) to improve the delivery of therapeutic cargo. Herein, we implement a flash nanoprecipitation (FNP) approach to produce nanocarriers of diverse vesicular morphologies by using various molecular weight PEG-bl-DEAEMA-co-BMA (PEG-DB) polymers. We demonstrated that FNP can produce uniform (PDI < 0.1) particles after 5 impingements, and that by varying the copolymer hydrophilic mass fraction, FNP enables access to a diverse variety of nanoarchitectures including micelles, unilamellar vesicles (polymersomes), and multi-compartment vesicles (MCVs). We synthesized a library of 2 kDa PEG block copolymers, with DEAEMA-co-BMA second block molecular weights of 3, 6, 12, 15, 20, and 30 kDa. All formulations were both pH responsive, endosomolytic, and capable of loading and cytosolically delivering small negatively charged molecules – albeit to different degrees. Using a B16.F10 melanoma model, we showcased the therapeutic potential of a lead FNP formulated PEG-DB nanocarrier, encapsulating the cyclic dinucleotide (CDN) cGAMP to activate the stimulator of interferon genes (STING) pathway in a therapeutically relevant context. Collectively, these data demonstrate that an FNP process can be used to formulate pH-responsive nanocarriers of diverse morphologies using a PEG-DB polymer system. As FNP is an industrially scalable process, these data address the critical translational challenge of producing PEG-DB nanoparticles at scale. Furthermore, the diverse morphologies produced may specialize in the delivery of distinct biomolecular cargos for other therapeutic applications, implicating the therapeutic potential of this platform in an array of disease applications.
36 MATERIALS SCIENCE↗
The influence of intake flow and coolant temperature on gasoline spray morphology during early-injection DISI engine operation
Multi-hole gasoline injectors operating at conditions spanning throttled early-intake stroke operation produce spray plumes that either remained separated or merge and collapse due to flash boiling. Flash boiling occurs due to the sudden expansion of gas bubbles in the liquid fuel at high fuel temperature and low ambient pressure. This study records high-speed images of spray-morphology changes due to in-cylinder flow, thereby revealing operating conditions that do and do not affect the self-induced morphology observed in quiescent vessels. Specifically, in a central-injection, four-valve, high-tumble engine, where the thermodynamic state and in-cylinder cross flow are dynamic. Motivated by cold start and hot restart operation, the fuel pressure, coolant temperature, in-cylinder air pressure, and engine rpm were systematically varied over relevant operating conditions, which bracketed the range from non- to flash-boiling sprays. The results reveal the operating conditions at which the in-cylinder cross flow disrupts the spray morphology as well as the extent of the disruption. At 650 rpm, the spray morphology was similar to that observed in quiescent vessels at nominally equivalent fuel temperature and in-cylinder pressure, indicating that the spray’s self-induced entrainment flow dominated the in-cylinder flow. However, for fuel temperature and ambient pressure near the transition between non- and flash-boiling, the intake cross flow at higher engine speed (1950 rpm) significantly disrupted the spray morphology. The high cross-flow velocity appears to induce plume merging and collapse, whereas none was evident at low rpm (650 rpm). This study led to the postulate that the spray merging and collapse are governed by the rate of atomization near the nozzle exit, presumed to be controlled by either or both aerodynamic atomization and flash-boiling intensity. It would then follow that spray modeling in CFD requires atomization models that blend the effects of both physical processes.
42 ENGINEERING↗
Statistical 3D morphology characterization of vaterite microspheres produced by engineered Escherichia coli
Hollow vaterite microspheres are important materials for biomedical applications such as drug delivery and regenerative medicine owing to their biocompatibility, high specific surface area, and ability to encapsulate a large number of bioactive molecules and compounds. We demonstrated that hollow vaterite microspheres are produced by an Escherichia coli strain engineered with a urease gene cluster from the ureolytic bacteria Sporosarcina pasteurii in the presence of bovine serum albumin. We characterized the 3D nanoscale morphology of five biogenic hollow vaterite microspheres using 3D high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) tomography. Using automated high-throughput HAADF-STEM imaging across several sample tilt orientations, we show that the microspheres evolved from a smaller more ellipsoidal shape to a larger more spherical shape while the internal hollow core increased in size and remained relatively spherical, indicating that the microspheres produced by this engineered strain likely do not contain the bacteria. The statistical 3D morphology information demonstrates the potential for using biogenic calcium carbonate mineralization to produce hollow vaterite microspheres with controlled morphologies.
3D morphology↗
Morphological-informed Thermal Property Prediction in the Engineering Domain
Using first-principle, atomic scale methods to predict thermal carrier (electron and phonon) behavior at nanoscale yields highly resolved thermal properties. Density functional theory simulations can model myriad effects on the transport of phonons and electrons (e.g., phonon and electron coupling, electron correlation, defect presence, carrier scattering), and yield thermal properties for small geometric domains such as thermal and electrical conductivity, or heat capacity. While these thermal properties are accurate in atomistic and nanoscopic systems, they must be scaled up to the microstructural domain to be a useful predictor for experimental basis, as the microscale is where myriad changes and physical phenomenon occur within a material (e.g., grain boundaries, precipitate aggregations, interfaces, defect clusters). My talk will discuss the necessity of thermal property predictions for nuclear fuels applications and more. Additionally I will discuss the necessity in developing multi-physics, multi-scale methods for future applications in predictions for not only nuclear fuels, but other materials applications.
36 MATERIALS SCIENCE↗
Mechanical stimulation improves tissue-engineered human skeletal muscle
Human bioartificial muscles (HBAMs) are tissue engineered by suspending muscle cells in collagen/MATRIGEL, casting in a silicone mold containing end attachment sites, and allowing the cells to differentiate for 8 to 16 days. The resulting HBAMs are representative of skeletal muscle in that they contain parallel arrays of postmitotic myofibers; however, they differ in many other morphological characteristics. To engineer improved HBAMs, i.e., more in vivo-like, we developed Mechanical Cell Stimulator (MCS) hardware to apply in vivo-like forces directly to the engineered tissue. A sensitive force transducer attached to the HBAM measured real-time, internally generated, as well as externally applied, forces. The muscle cells generated increasing internal forces during formation which were inhibitable with a cytoskeleton depolymerizer. Repetitive stretch/relaxation for 8 days increased the HBAM elasticity two- to threefold, mean myofiber diameter 12%, and myofiber area percent 40%. This system allows engineering of improved skeletal muscle analogs as well as a nondestructive method to determine passive force and viscoelastic properties of the resulting tissue.
Non-NASA Center↗
Synergistic Co-Ir/Ru Composite Electrocatalysts Impart Efficient and Durable Oxygen Evolution Catalysis in Acid
Exploring highly active and robust catalysts, which have low precious metal content, to boost the kinetically sluggish oxygen evolution reaction (OER) is a key concern for hydrogen production via proton exchange membrane water electrolysis (PEMWE). Here, in this work, rational engineering of the morphology and the local geometric ligand environment of Ir and Ru catalysts are presented by using defect-rich, lanthanum- and lithium-doped Co 3 O 4 nanofiber (LLCF) as substrate that promotes the electrocatalytic OER. Two catalysts, IrCoOx@LLCF and RuCoOx@LLCF, achieve mass activities of 1013.5 A g Ir –1 and 1911.4 A g Ru –1 in 0.1 M HClO 4 at 300 mV overpotential, respectively, which are 26 and 50 times higher than that of commercial IrO 2 and RuO 2 . Operando X-ray absorption spectroscopy unveils the reversible structure of IrCoOx during the OER and the suppression of over-oxidation of Co and Ir, giving rise to high stability. Density functional theory calculations reveal that the local geometric ligand engineering optimizes the binding of oxygenated species to the active sites, resulting in strongly enhanced catalytic activity.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Constructing Ultrathin W-Doped NiFe Nanosheets via Facile Electrosynthesis as Bifunctional Electrocatalysts for Efficient Water Splitting
Exploring cost-effective and efficient bifunctional electrocatalysts via simple fabrication strategies is strongly desired for practical water splitting. Herein, an easy and fast one-step electrodeposition process is developed to fabricate W-doped NiFe (NiFeW)-layered double hydroxides with ultrathin nanosheet features at room temperature and ambient pressure as bifunctional catalysts for water splitting. Notably, the NiFeW nanosheets require overpotentials of only 239 and 115 mV for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively, to reach a current density of 10 mA/cm 2 in alkaline media. Their exceptional performance is further demonstrated in a full electrolyzer configuration with the NiFeW as both anode and cathode catalysts, which achieves a low cell voltage of 1.59 V at 10 mA/cm 2 , 110 mV lower than that of the commercial IrO 2 (anode) and Pt (cathode) catalysts. Moreover, the NiFeW nanosheets are superior to various recently reported bifunctional electrocatalysts. Such remarkable performances mainly ascribe to W doping, which not only effectively modulates the electrocatalyst morphology but also engineers the electronic structure of NiFe hydroxides to boost charge-transfer kinetics for both the OER and HER. Hence, the ultrathin NiFeW nanosheets with an efficient fabrication strategy are promising as bifunctional electrodes for alkaline water electrolyzers.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Dynamic Metal–Support Interaction Dictates Cu Nanoparticle Sintering on Al 2 O 3 Surfaces
Nanoparticle sintering remains a critical challenge in heterogeneous catalysis. In this work, we present a unified deep potential (DP) model based on the Perdew–Burke–Ernzerhof approximation of density functional theory for Cu nanoparticles on three Al 2 O 3 surfaces (γ-Al 2 O 3 (100), γ-Al 2 O 3 (110), and α-Al 2 O 3 (0001)). Using DP-accelerated simulations, we reveal that the nanoparticle size-mobility relationship strongly depends on the supporting surface. The diffusion of nanoparticles on the two γ-Al 2 O 3 surfaces is almost independent of the size of the nanoparticle, while the diffusion on α-Al 2 O 3 (0001) decreases rapidly with increasing size. Interestingly, nanoparticles with fewer than 55 atoms diffuse several times faster on α-Al 2 O 3 (0001) than on γ-Al 2 O 3 (100) at 800 K while expected to be more sluggish based on their larger binding energy at 0 K. The diffusion on α-Al 2 O 3 (0001) is facilitated by dynamic metal–support interaction (MSI), where Al atoms move out of the surface plane to optimize contact with the nanoparticle and relax back to the plane as the nanoparticle moves away. In contrast, the MSI on γ-Al 2 O 3 (100) and on γ-Al 2 O 3 (110) is dominated by more stable and directional Cu–O bonds, consistent with the limited diffusion observed on these surfaces. Our extended MD simulations provide insight into the sintering processes, showing that the dispersity of the nanoparticles strongly influences the coalescence driven by nanoparticle diffusion. We observed that the coalescence of Cu 13 nanoparticles on α-Al 2 O 3 (0001) can occur in a short time (10 ns) at 800 K even with an initial internanoparticle distance increased to 3 nm, while the coalescence on the two γ-Al 2 O 3 surfaces are inhibited significantly by increasing the initial internanoparticle distance. These findings demonstrate that the dynamics of the supporting surface is crucial to understanding the sintering mechanism and offer guidance for designing sinter-resistant catalysts by engineering the support morphology.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Hierarchical porous metals with deterministic 3D morphology and shape via de-alloying of 3D printed alloys
The present disclosure relates to a method for forming a three dimensional, hierarchical, porous metal structure with deterministically controlled 3D multiscale pore architectures. The method may involve providing a feedstock able to be applied in an additive manufacturing process, and using an additive manufacturing process to produce a three dimensional (3D) structure using the feedstock. The method may involve further processing the 3D structure through at least a de-alloying operation to form a metallic 3D structure having an engineered, digitally controlled macropore morphology with integrated nanoporosity.
Qi, Zhen↗
Dual-pace transient heat conduction in vertically aligned carbon nanotube arrays induced by structure separation
Vertically aligned arrays of carbon nanotubes (CNTs) are attractive for a wide range of macroscopic applications which can exploit the remarkable properties of individual nanotubes. In this work, an abnormal behavior of CNT bundles in heat conduction is discovered under the transient electro-thermal characterization. The measured voltage change over the sample shows a dual-pace thermal response (DTR), which could not be fitted using a single thermal diffusivity heat transfer model. Instead, two thermal diffusivities are determined from the DTR phenomenon. Three rounds of cryogenic experiments are conducted to investigate the physics behind DTR phenomenon. It starts to emerge when the temperature is reduced to a certain level. After two rounds of cryogenic experiments, the DTR phenomenon becomes permanent from 295 K to 10 K. The nano-scale structure separation induced by the increased thermal strain leads to macroscale structure separation, which results in two parallel heat conduction paths responsible for the DTR phenomenon. By building a new parallel heat transfer model taking both the transient and steady-state electrical and thermal response into consideration, the area ratio of separated CNTs is determined. Furthermore, this result uncovers the existence of coiled morphology and nano-structure evolution of CNTs under cryogenic state and its effect on thermal and electrical transport, especially on their transient behaviors. Knowledge of the thermal transport in these CNTs arrays is important considering the fact that transient thermal response strongly affects their mechanical, optical, and electrical behaviors.
42 ENGINEERING↗