Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “magnetic polymers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Multimaterial Aerosol Jet Printed Magnetic Nanocomposites for Microwave Circuits

Here this article demonstrates the process and characterization of additively manufactured polymer-matrix magnetic nanocomposites. These nanocomposites are composed of nickel-zinc ferrite (Ni 0.5 Zn 0.5 Fe 2 O 4 ) nanoparticles in a polyimide matrix. These materials are printed using multimaterial aerosol jet printing where aerosols of nickel-zinc ferrite and polyimide inks are mixed in place to fabricate structures with nonunity relative permeability. To characterize these materials, we use energy-dispersive X-ray spectroscopy to estimate the content of ferrite in the composite, fitted simulation models, and ring resonator measurements to estimate the permeability. In fully aerosol jet printed 1-mm 2 inductors, we demonstrate an increase in inductance density of 40% in a 4.5-turn microstrip spiral inductor using this printed composite. These fully printed inductors demonstrate an inductance density of 4.2-nH/mm 2 . EDS analysis shows films with 18 wt.% Ni 0.5 Zn 0.5 Fe 2 O 4 . Finally, we show microstrip transmission lines on printed composite compared to the same on polyimide subjected to a dc magnetic bias, displaying a magnetic resonance behavior.

42 ENGINEERING↗
DOE OSTI2021

MADE3D: Enabling the next generation of high-torque density wind generators by additive design and 3D printing

Direct-drive wind turbine generators are increasing in popularity, thanks to recent project developments—especially offshore, where reliability and efficiency are major cost drivers. Yet, high capital costs are forcing many original equipment manufacturers to consider lightweight, high-torque density generators for next-generation multi-megawatt turbines that may be difficult to realize by traditional design or manufacturing methods. In this study, we present a new design framework enabled by advanced machine learning and multimaterial additive manufacturing to perform a magnetic topology optimization that maximizes the torque per rotor active mass for a 15-megawatt direct-drive permanent magnet wind generator. A comparison of the proposed approach against conventional topology optimization demonstrated a significant increase in computational efficiency and accuracy in performance predictions. Results using single and multimaterial compositions for rotor core and magnets identify a wider choice of 3D printable designs for a given specification. A hybrid combination of sintered and dysprosium-free polymer-bonded magnets shows good potential for torque performance by saving material costs up to 8.75%. More than 30% improvement in rotor torque densities is identified which can marginally improve the overall generator torque density. With the rapid evolution of multipowder deposition technolgies, this study can greatly inspire a new paradigm for design-driven manufacturing with novel material compositions and lightweight, low-cost, high-strength multimaterial geometries that were previously unexplored for direct-drive generators.

17 WIND ENERGY↗
DOE OSTI2021

MADE3D: Enabling the Next-Generation High-Torque- Density Wind Generators by Additive Design and 3D Printing

Direct-drive wind turbine generators are increasing in popularity, thanks to recent project developments - especially offshore, where reliability and efficiency are major cost drivers. Yet, high capital costs are forcing many original equipment manufacturers to consider lightweight, high-torque density generators for next-generation multi-megawatt turbines that may be difficult to realize by traditional design or manufacturing methods. In this study, we present a new design framework enabled by advanced machine learning and multimaterial additive manufacturing to perform a magnetic topology optimization that maximizes the torque per rotor active mass for a 15-megawatt direct-drive permanent magnet wind generator. A comparison of the proposed approach against conventional topology optimization demonstrated a significant increase in computational efficiency and accuracy in performance predictions. Results using single and multimaterial compositions for rotor core and magnets identify a wider choice of 3D printable designs for a given specification. A hybrid combination of sintered and dysprosium-free polymer-bonded magnets shows good potential for torque performance by saving material costs up to 8.75%. More than 30% improvement in rotor torque densities is identified which can marginally improve the overall generator torque density. With the rapid evolution of multipowder deposition technologies, this study can greatly inspire a new paradigm for design-driven manufacturing with novel material compositions and lightweight, low-cost, high-strength multimaterial geometries that were previously unexplored for direct-drive generators.

3D printing↗
DOE OSTI2021

Structural insights into Lewis acid- and F4TCNQ-doped conjugated polymers by solid-state magnetic resonance spectroscopy

Molecular doping strategies facilitate orders of magnitude enhancement in the charge carrier mobility of organic semiconductors (OSCs). Understanding the different doping mechanisms and molecular-level constraints on doping efficiency related to the material energy levels is crucial to develop versatile dopants for OSCs. Given the compositional and structural heterogeneities associated with OSC thin films, insight into dopant–polymer interactions by long-range techniques such as X-ray scattering and electron microscopy is exceedingly challenging to obtain. This study employs short-range probes, solid-state (ss)NMR and EPR spectroscopy, to resolve local structures and intermolecular interactions between dopants such as F4TCNQ (2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane), Lewis acid BCF (tris[pentafluorophenyl] borane) and Lewis base conjugated polymer, PCPDTBT (P4) (poly[2,6-(4,4-bis(2-hexadecyl)-4H-cyclopenta[2,1-b;3,4-b']dithiophene)-alt-4,7(2,1,3-benzothiadiazole)]). Analysis of 1 H and 13 C ssNMR spectra of P4, P4 : F4TCNQ and P4 : BCF blends indicates that the addition of dopants induces local structural changes in the P4 polymer, and causes paramagnetism-induced signal broadening and intensity losses. The hyperfine interactions in P4 : BCF and P4 : F4TCNQ are characterized by two-dimensional pulsed EPR spectroscopy. For P4 : F4TCNQ, 19 F ssNMR analysis indicates that the F4TCNQ molecules are distributed and aggregated into different local chemical environments. By comparison, BCF molecules are intermixed with the P4 polymer and interact with traces of water molecules to form BCF–water complexes that serve as Brønsted acid sites, as revealed by 11 B ssNMR spectroscopy. These results indicate that the P4–dopant blends exhibit complex morphology with different distributions of dopants, whereby the combined use of ssNMR and EPR provides essential insights into how higher doping efficiency is observed with BCF and a mediocre efficiency is associated with F4TCNQ molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2023

An Assessment of Additively Manufactured Bonded Permanent Magnets for a Distributed Wind Generator

In this paper, we examine and compare the performance of a generator design optimized using additively manufactured NdFeB-SmFeN in nylon-polymer-bonded permanent magnets (PMs) against a generator design with conventional NdFeB sintered PMs. To realize this, a commercially available 15-kW wind generator's rotor is re-optimized using both additively manufactured and sintered NdFeB magnets using simple geometric parameterization that allowed for two specific magnet shapes, namely, arc-shaped and crown-shaped designs. Results showed that for a similar generator performance, the designs with additively manufactured bonded PMs are more cost-competitive in terms of the estimated PM material cost and also have negligible eddy current magnet losses.

additive manufacturing↗
DOE OSTI2025

Polymorphism and Negative Linear Compressibility in Pyrazine-d4

Pyrazine (1,4-diazine) is a widely used linker in coordination polymers, molecular magnets, and metal–organic frameworks, yet its solid-state polymorphism is controlled by weak C–H···N interactions. Using variable-temperature and high-pressure neutron diffraction, a previously unrecognized low-temperature transition to phase IV is identified, showing that the form stabilized under pressure can also be accessed below ∼90 K at ambient pressure in the perdeuterated compound. The transition from phase III → IV involves a symmetry-breaking lattice distortion driven by the reorganization of C–H···N hydrogen bonds, accompanied by negative linear compressibility, which is primarily accommodated through the reduction in void-space within the structure. Structural analysis reveals that while the overall monoclinic framework of phase IV is preserved under both temperature and pressure routes, the evolution of hydrogen-bonded network is distinct depending on the pathway taken. These results establish pyrazine as a model molecular solid for studying pressure–temperature polymorphism and demonstrate how weak directional interactions can produce anomalous mechanical responses in organic crystals.

Ridley, Christopher J. [Oak Ridge National Laborat↗
DOE OSTI2020

Nonlinear propagating modes beyond the phonons in fluorite-structured crystals

The vibrational energy of crystals is known to propagate in a fixed number of phonon branches allowed by symmetry. In the realm of nonlinear dynamics, however, additional nonlinear propagating modes are possible. Nonlinear propagating modes have unique properties that are important in many disciplines including optical communications, conducting polymers, biology, magnetism, and nuclear physics. Yet, despite the crucial importance of crystal lattice vibrations in fundamental and applied science, such additional propagating modes have not been observed in ordinary crystals. Here, we show that propagating modes exist beyond the phonons in fluorite-structured thoria, urania, and natural calcium fluoride using neutron scattering and first-principles calculations. These modes are observed at temperatures ranging from 5 K up to 1200 K, extend to frequencies 30–40% higher than the maximum phonon frequency, and travel at velocities comparable to or higher than the fastest phonon. The nonlinear origin of the modes is explained in part via perturbation theory, which approximately accounts for nonlinearity. Given that these modes are still clearly observed at 5 K, they are likely an inherent feature of the quantum ground state. The existence of these waves in three-dimensional crystals may have ramifications for material properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Large Area Transfer of Bismuth‐Based Layered Oxide Thin Films Using a Flexible Polymer Transfer Method

Magnetic and ferroelectric oxide thin films have long been studied for their applications in electronics, optics, and sensors. The properties of these oxide thin films are highly dependent on the film growth quality and conditions. To maximize the film quality, epitaxial oxide thin films are frequently grown on single-crystal oxide substrates such as strontium titanate (SrTiO 3 ) and lanthanum aluminate (LaAlO 3 ) to satisfy lattice matching and minimize defect formation. However, these single-crystal oxide substrates cannot readily be used in practical applications due to their high cost, limited availability, and small wafer sizes. One leading solution to this challenge is film transfer. In this demonstration, a material from a new class of multiferroic oxides is selected, namely bismuth-based layered oxides, for the transfer. A water-soluble sacrificial layer of Sr 3 Al 2 O 6 is inserted between the oxide substrate and the film, enabling the release of the film from the original substrate onto a polymer support layer. The films are transferred onto new substrates of silicon and lithium niobate (LiNbO 3 ) and the polymer layer is removed. These substrates allow for the future design of electronic and optical devices as well as sensors using this new group of multiferroic layered oxide films.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Aluminum/SmCo 5 composites for structural and magnetic applications

Metal-bonded magnetic composites (MBMCs) present a promising alternative to dense sintered magnets, particularly for intricate components. Compared to polymer-based bonded magnets, MBMCs have wider applicability in harsh environments. In this paper, we demonstrate a solid-state shear-based manufacturing technique to introduce localized magnetization into a paramagnetic aluminum matrix by embedding SmCo5 permanent magnet particles. Our magnetic composites display hard magnetic behavior with a coercivity of 13 kOe and a remanent magnetization of 4.32 emu/g. In addition to magnetization, we also report a 9% improvement in Young’s modulus. Despite the local temperature rise during processing, the magnetic phases didn’t decompose into unwanted phases, preserving the composite's hard magnetic properties. Creation of an interfacial metallurgical bond with the matrix ensured the suitability of the composites for structural applications. Our study investigates the mechanical, and functional properties of composites, paving the way for lightweight structural magnetic composites with a transformative potential in the aerospace, nuclear, and automotive applications. This work underscores the potential for further optimization and development to drive innovations in magnet and equipment design.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Advanced multimaterial shape optimization methods as applied to advanced manufacturing of wind turbine generators

Abstract Currently, many utility‐scale wind turbine generator original equipment manufacturers are dependent on imported rare earth permanent magnets, which are susceptible to market risks from cost instability. To lower the production costs of these generators and stay competitive in the market, several small wind manufacturers are pursuing continuous improvements to both generator design and manufacturing. However, traditional design and manufacturing methods have yielded marginal improvements in wind power performance. This work presents novel methods to redesign a baseline 15‐kW wind turbine generator with reduced rare‐earth permanent magnets by leveraging cutting‐edge three‐dimensional (3D) printed polymer‐bonded permanent magnets and steel. Symmetric, asymmetric, and multimaterial‐magnet parametrization methods are introduced for shape optimization. We extend the symmetric and asymmetric methods to the back iron in the stator to further investigate the impact and opportunities for performance improvements with lesser active materials. We employ a design‐of‐experiments approach with parametric computer‐aided design for shape generation and evaluate different designs by magneto‐thermal modeling and finite‐element analysis. We use adaptive sampling technique to identify better performing designs with lesser magnet mass, higher efficiency, and lower cogging torque when compared with the baseline generator. Asymmetric pole designs resulted in a magnet mass in the range of 4.77–5.37 kg, which was 27%–35% lighter than the baseline generator, suggesting that a new design freedom exists that can be enabled by advanced manufacturing, such as 3D printing. Shaping the back iron in the stator resulted in material savings in electrical steel of up to 14.62 kg, which was 20% lighter than the baseline stator. We conducted a structural analysis to evaluate an optimized asymmetric rotor design from the point of view of mechanical integrity and air‐gap stiffness. The magnetically optimal shape profile was shown as having a positive impact on the radial stiffness, and an optimal solution was discovered to reduce the structural mass by nearly 30 kg, which was 29% lighter than the baseline.

17 WIND ENERGY↗
DOE OSTI2022

Magnetic Ordering in a High‐Spin Donor–Acceptor Conjugated Polymer

Abstract The development of open‐shell organic molecules that magnetically order at room temperature,which can be practically applied, remains a grand challenge in chemistry, physics, and materials science. Despite the exploration of vast chemical space, design paradigms for organic paramagnetic centers generally result in unpaired electron spins that are unstable or isotropic. Here, a high‐spin conjugated polymer is demonstrated, which is composed of alternating cyclopentadithiophene and benzo[1,2‐ c ;4,5‐ c ′]bis[1,2,5]thiadiazole heterocycles, in which macromolecular structure and topology coalesce to promote the spin center generation and intermolecular exchange coupling. Electron paramagnetic resonance (EPR) spectroscopy is consistent with spatially localized spins, while magnetic susceptibility measurements show clear anisotropic spin ordering and exchange interactions that persist at room temperature. The application of long‐range π‐correlations for spin center generation promotes remarkable stability. This work offers a fundamentally new approach to the implementation of this long‐sought‐after physical phenomenon within organic materials and the integration of manifold properties within emerging technologies.

Steelman, Michael E.↗
DOE OSTI2020

High-temperature 2D ferromagnetism in conjugated microporous porphyrin-type polymers

The need for magnetic 2D materials that are stable to the enviroment and have high Curie temperatures is very important for various electronic and spintronic applications. We have found that two-dimensional porphyrin-type aza-conjugated microporous polymer crystals are such a material (Fe-aza-CMPs). Fe-aza-CMPs are stable to CO, CO 2 , and O 2 atmospheres and show unusual adsorption, electronic, and magnetic properties. Indeed, they are semiconductors with small energy band gaps ranging from 0.27 eV to 0.626 eV. CO, CO 2 , and O 2 molecules can be attached in three different ways where single, double, or triple molecules are bound to iron atoms in Fe-aza-CMPs. For different attachment configurations we find that for CO and CO 2 a uniform distribution of the molecules is most energetically favorable while for O 2 molecules aggregation is most energetically preferable. The magnetic moments decrease from 4 to 2 to 0 for singly, doubly, triply occupied configurations for all gasses respectively. The most interesting magnetic properties are found for O 2 molecules attached to the Fe-aza-CMP. For a single attachment configuration we find that an antiferromagnetic state is favorable. When two O 2 molecules are attached, the calculations show the highest exchange integral with a value of J = 1071 μeV. This value has been verified by two independent methods where in the first method J is calculated by the energy difference between ferromagnetic and anitferromagnetic configurations. The second method is based on the frozen magnon approach where the magnon dispersion curve has been fitted by the Ising model. Finally, for the second method J has been estimated at J = 1100 μeV in excellent agreement with the first method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Cluster-Spin-Glass Magnetic Behavior and Morphology in the Coordination Polymer Alloys Fe y Co 1– y BTT

We report the synthesis of a series of pseudo-1D coordination polymer (CP) materials with the formula Fe y Co 1–y BTT (BTT = 1,3,5-benzenetrithiolate). These materials were structurally characterized by PXRD Rietveld, EXAFS, and PDF analyses, revealing that the CP superstructure enables a continuous and isomorphous alloy between the two homometallic compounds. Lower Fe loadings exhibit emergent spin glass magnetic behavior, such as memory effects and composition-dependent spin glass response time constants ranging from 6.9 × 10 –9 s to 1.8 × 10 –6 s. These data are consistent with the formation of spin clusters within the lattice. The magnetic behavior in these materials was modeled via replica exchange Monte Carlo simulation, which provides a good match for the experimentally measured spin glassing and magnetic phase transitions. Furthermore, these findings underscore how the rigid superstructure of CP and MOF scaffolds can enable the systematic tuning of physical properties, such as the spin glass behavior described here.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Dynamic heterogeneity and nanophase separation in rubber-toughened amine-cured highly cross-linked polymer networks

Solid state nuclear magnetic resonance (NMR) spectroscopy and small-to wide-angle X-ray scattering (SWAXS) methods were used to characterize the heterogeneous dynamics and polymer domain structure in rubber modified thermoset materials containing the diglycidyl ether of bisphenol A (DGEBA) epoxy resin and a mixture of Jeffamine reactive rubber and 4,4-diaminodicyclohexylmethane (PACM) amine curing agent. The polymer chain dynamics and morphologies as a function of the PACM/Jeffamine ratio were determined. Using dipolar-filtered NMR experiments, the resulting networks are shown to be composed of mobile and rigid regions that are separated on nanometer length scales, along with a dynamically immobilized interface region. Proton NMR spin diffusion experiments measured the dimensions of the mobile phase to range between 9 and 66 nm and varied with the relative PACM concentration. Solid state 13 C magic angle spinning NMR experiments show that the highly mobile phase is composed entirely of the dynamically flexible polyether chains of the Jeffamine rubber, the immobilized interface region is a mixture of DGEBA, PACM, and the Jeffamine rubber, with the PACM cross-linked to DGEBA predominantly residing in the rigid phase. The SWAXS results showed compositional nanophase separation spanning the 11–77 nm range. These measurements of the nanoscale compositional and dynamic heterogeneity provide molecular level insight into the very broad and controllable glass transition temperature distributions observed for these highly cross-linked polymer networks.

36 MATERIALS SCIENCE↗
DOE OSTI2021

In-situ magnetic alignment model for additive manufacturing of anisotropic bonded magnets

In this work, we report a mathematical framework which predicts the degree of alignment (DoA) in an in-situ aligned additively manufactured 3D printed bonded magnets. A multiphysics model is developed which couples the harmonious interactions of magnetic particles in a viscous flowing polymer under the presence of an external magnetic field. The hydrodynamic fluid-particle interaction is paired with the magnetophoretic force to predict the particle trajectory and distribution during extrusion through a 3D printer nozzle. Succeeding the force balance, a magnetohydrodynamic torque equilibrium analysis is performed to predict the net-orientation of the magnetic particles as a function of the applied field strength, viscous forces, and particle-to-particle interactions (P2P). Experimental validation of the DoA predictions is performed using 65 vol% Nd-Fe-B+Sm-Fe-N in Nylon12 (DoA exp = 0.620 and DoA theory = 0.686) and 15 vol% Sm-Co in PLA (DoA exp = 0.830 and DoA theory = 0.863). A parametric analysis is performed to analyze the effect of operating and design parameters like alignment field strength, magnetic loading fraction, extrusion load, and particle size. The model predicts a competing behavior between particle-fluid and particle-particle interactions under the presence of an applied field. Lastly, the model provides a framework to efficiently predict the DoA in tandem with a functionalized-magnetic 3D printer and allows the user to adjust the operating parameters according to the desired DoA.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Charge transport and antiferromagnetic ordering in nitroxide radical crystals

Nonconjugated radical polymers and small molecules are employed as functional materials in organic electronic devices. Furthermore, the unpaired electrons on these materials have permanent magnetic moments, making these materials promising candidates for organic magnets. Through molecular design, strong antiferromagnetic and ferromagnetic ordering have been achieved in conjugated materials. However, the magnetic properties of nonconjugated radical polymers have only shown weak magnetic interactions among the open-shell sites due to the large mean separation between radicals in typical materials. Here, we have designed, synthesized, and crystalized two open-shell molecules that used molecular engineering to control the assembly of the open-shell sites into a strong antiferromagnetically ordered network. The strong antiferromagnetic interaction is evidenced by a high paramagnetic-to-antiferromagnetic transition temperature of ~40 K. This high transition temperature was a result of a high spin exchange coupling constant J of about –20 cm –1 , which was suggested by both experimental and computed coupling parameters given by the energy difference between high-spin and low-spin broken-symmetry structures. In addition, a single-crystal electrical conductivity of ~10 –3 S m –1 was achieved, which indicated the potential of this material in electronic applications. As a result, this work provides an insight into a design strategy for radical-based electronic and magnetic materials through proper molecular structure modifications.

36 MATERIALS SCIENCE↗