Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “low pressure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A multi-dimensional dataset for two-phase instability in low pressure natural circulation based on direct transient local measurement

Thermal hydraulic instability can challenge the control and the safety of nuclear reactors. This experimental research captures and investigates the instability in a low-pressure (1–10 atmospheres) natural circulation loop with an adiabatic chimney installed above the heated section. Direct transient local measurement of two-phase flow is performed at multiple axial locations along the flow channel with thermocouples and conductivity probes traversed by customized high-precision mechanisms. Based on the periodicity of oscillations, a post-processing method is proposed to align the data captured non-simultaneously to reconstruct the instability behavior in one representative period. The averaging operation over multiple oscillation cycles is performed to reduce the random errors. Cyclic phenomena are clearly demonstrated by the post-processed data, and rapid void fraction change induced by the flashing is observed to be significant in the driving mechanism for low pressure oscillations. Parametric effects of inlet subcooling, heat flux, inlet flow restriction and system pressure are studied within the experiment range, and qualitative results are explained and compared with existing literature. The ratio between the oscillation period and the travelling time of the fluid particle through the test section is compared with the theoretical value for the density wave oscillation. The new dataset contains directly measured transient multi-dimensional two-phase data along the flow channel for natural circulation under density wave oscillations. The generated dataset is valuable for the validation of system analysis codes and CFD codes in the simulation of natural circulation phenomena and dynamic two-phase flow.

42 ENGINEERING↗
DOE OSTI2024

Investigating instabilities in magnetized low-pressure capacitively coupled RF plasma using particle-in-cell (PIC) simulations

The effect of a uniform magnetic field on particle transport in low-pressure radio frequency (RF) capacitively coupled plasma (CCP) has been studied using a particle-in-cell model. Three distinct regimes of plasma behavior can be identified as a function of the magnetic field. In the first regime at low magnetic fields, asymmetric plasma profiles are observed within the CCP chamber due to the effect of $\overrightarrow{E}$ × $\overrightarrow{B}$ drift. As the magnetic field increases, instabilities develop and form self-organized spoke-shaped structures that are distinctly seen within the bulk plasma closer to the sheath. In this second regime, the spoke-shaped coherent structures rotate inside the plasma chamber in the -$\overrightarrow{E}$ × $\overrightarrow{B}$ direction, where $\overrightarrow{E}$ × $\overrightarrow{B}$ are the DC electric and magnetic field vectors, respectively, and the DC electric field exists in the sheath and pre-sheath regions. The spoke rotation frequency is in the megahertz range. As the magnetic field strength increases further, the rotating coherent spokes continue to exist near the sheath. The coherent structures are, however, accompanied by new small-scale incoherent structures originating and moving within the bulk plasma region away from the sheath. This is the third regime of plasma behavior. The threshold values of the magnetic field between these regimes were found not to vary with changing plasma reactor geometry (e.g., area ratio between ground and powered electrodes) or the use of an external capacitor between the RF-powered electrode and the RF source. The threshold values of the magnetic field between these regimes shift toward higher values with increasing gas pressure. Analysis of the results indicates that the rotating structures are due to the lower hybrid instability driven by density gradients and electron-neutral collisions. This paper provides guidance on the upper limit of the magnetic field for instability-free operation in low-pressure CCP-based semiconductor deposition and etch systems that use the external magnetic field for plasma uniformity control.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Evaluating Ensemble Predictions of South Asian Monsoon Low Pressure System Genesis

Abstract Synoptic-scale vortices known as monsoon low pressure systems (LPSs) frequently produce intense precipitation and hydrological disasters in South Asia, so accurately forecasting LPS genesis is crucial for improving disaster preparedness and response. However, the accuracy of LPS genesis forecasts by numerical weather prediction models has remained unknown. Here, we evaluate the performance of two global ensemble models—the U.S. Global Ensemble Forecast System (GEFS) and the Ensemble Prediction System of the European Centre for Medium-Range Weather Forecasts (ECMWF)—in predicting LPS genesis during the years 2021–22. The GEFS successfully predicted about half the observed LPS genesis events 1–2 days in advance; the ECMWF model captured an additional 10% of observed genesis events. Both models had a false alarm ratio (FAR) of around 50% for 1–2-day lead times. In both ensembles, the control run typically exhibited a higher probability of detection (POD) of observed events and a lower FAR compared to the perturbed ensemble members. However, a consensus forecast, in which genesis is predicted when at least 20% of ensemble members forecast LPS formation, had POD values surpassing those of the control run for all lead times. Moreover, probabilistic predictions of genesis over the Bay of Bengal, where most LPSs form, were skillful, with the fraction of ensemble members predicting LPS formation over a 5-day lead time approximating the observed frequency of genesis, without any adjustment or bias correction.

Suhas, D. L.↗
DOE OSTI2023

Historical and future trends in South Asian monsoon low pressure systems in a high-resolution model ensemble

Historical trends in monsoon low pressure systems (LPS), the dominant rain-bearing weather system of South Asia, have been difficult to assess due to changes in the observing network. Future projections have also remained uncertain because prior studies concluded that many coarse-resolution climate models do not accurately simulate LPS. Here, we examine changes in South Asian monsoon LPS simulated by an ensemble of global models, including some with high spatial resolution, that we show skillfully represent LPS. In the ensemble mean, the number of strong LPS (monsoon depressions) decreased over the last 65 years (1950–2014) by about 15% while no trend was detected for weaker LPS (monsoon lows). The reduction in depression counts then moderated, yielding no trend in the periods 1980–2050 or 2015–2050. The ensemble mean projects a shift in genesis from ocean to land and an increase in LPS precipitation of at least 7% K −1 , which together contribute to a projected increase in seasonal mean and extreme precipitation over central India.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Influence of monsoon low pressure systems on South Asian disasters and implications for disaster prediction

Transient atmospheric vortices called monsoon low pressure systems (LPS) generate a large fraction of total rainfall over South Asia and often produce extreme precipitation. Here, we assess the influence of these storms on the occurrence of disasters, using information from the Emergency Events Database (EM-DAT) that we geocoded and then associated with LPS tracks. We show that more than half of hydro-meteorological disasters over South Asia during summer are associated with these LPS events. Weaker LPS (which are called monsoon lows) occur more frequently than stronger LPS (called monsoon depressions), but the stronger LPS produce a larger number of disasters. Furthermore, although many prior studies have shown that the peak rainfall in LPS falls southwest of the vortex centre, the disasters are concentrated on the northern edge of the LPS tracks, along the Himalayas and upper basins of the Ganga and Brahmaputra rivers. Observations show a sharp peak in rainfall on the day of disasters, confirming the physical link between LPS and these hydro-meteorological disasters. A similar peak in rainfall is found in weather forecasts made up to five days before the disaster, suggesting that short-term precipitation forecasts can be useful in disaster preparation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

3D track reconstruction of low-energy electrons in the MIGDAL low pressure optical time projection chamber

Here, we demonstrate three-dimensional track reconstruction of electrons in a low pressure (50 Torr) optical TPC consisting of two glass GEMs with an ITO strip readout in CF 4 and CF 4 /Ar mixtures. The reconstructed tracks show a variety of event topologies, including short tracks from photoelectrons induced by 55 Fe 5.9 keV X-rays and long tracks from gamma ray interactions and beta decays. Algorithms for event identification and track ridge detection are discussed as well as multiple methods for integrating information from the camera image and ITO waveforms with the goal of full 3D reconstruction of the track.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Low-pressure inductively coupled plasmas in hydrogen: impact of gas heating on the spatial distribution of atomic hydrogen and vibrationally excited states

Non-equilibrium inductively coupled plasmas (ICPs) operating in hydrogen are of significant interest for applications including large-area materials processing. Increasing control of spatial gas heating, which drives the formation of neutral species density gradients and the rate of gas-temperature-dependent reactions, is critical. In this study, we use 2D fluid-kinetic simulations with the Hybrid Plasma Equipment Model to investigate the spatially resolved production of atomic hydrogen in a low-pressure planar ICP operating in pure hydrogen (10–20 Pa or 0.075–0.15 Torr, 300 W). The reaction set incorporates self-consistent calculation of the spatially resolved gas temperature and 14 vibrationally excited states. We find that the formation of neutral-gas density gradients, which result from spatially non-uniform electrical power deposition at constant pressure, can drive significant variations in the vibrational distribution function and density of atomic hydrogen when gas heating is spatially resolved. This highlights the significance of spatial gas heating on the production of reactive species in relatively high-power-density plasma processing sources.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Low-Pressure Electrolytic Ammonia (LPEA) Production

The project goal was to advance and demonstrate the techno-economic viability of a low-pressure electrolytic ammonia (LPEA) process for producing ammonia from electricity, hydrogen, and nitrogen. The critical enabling technology of the LPEA process is a proton-conducting electrolyte (PCE) developed by EERC and North Dakota State University (NDSU) capable of high proton conductivity (at least 1×10 -2 [0.01] siemens/centimeter [S/cm]) at 200°–300°C. An affordable PCE that works at 200°–300°C has been a major goal of the global electrochemistry industry for over 25 years, because it would enable operation at temperatures high enough to prevent catalyst poisoning and simplify water management and low enough to avoid temperature-driven degradation of fuel cell components comprising materials with differing coefficients of thermal expansion. Also critical to LPEA performance is a cathode catalyst capable of ammonia synthesis at a rate of ≥1×10 -10 moles/second-cm 2 catalyst surface area (mol-s -1 cm -2 ) in screening tests conducted at room temperature, and 1×10 -7 mol-s -1 cm -2 at 200°–300°C for commercial viability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Similarity law and frequency scaling in low-pressure capacitive radio frequency plasmas

We verify the similarity law (SL) and show a violation of frequency scaling (f-scaling) in low-pressure capacitive radio frequency (rf) plasmas via fully kinetic particle-in-cell simulations. The SL scaling relations for electron density and electron power absorption are first confirmed in similar rf discharges. Based on these results, with only the driving frequency varied, the f-scaling for electron density is also validated, showing almost the same trend as the SL scaling, across most of the frequency regime. However, violations of the f-scaling are observed at lower frequencies, which are found to be relevant to the electron heating mode transition from stochastic to Ohmic heating. Electron kinetic invariance is illustrated for the SL and f-scaling being valid, respectively, whereas the electron kinetic variation is observed when the f-scaling is violated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Development of a low-pressure Multi-Mesh THGEM detector for fission experiments at FRIB

Abstract A small-area imaging detector prototype for position measurement of fission fragments produced in low energy heavy-ion reactions is presented in this study. The detector readout is equipped with a 2-dimensional, position-sensitive gaseous avalanche readout based on the novel Multi-Mesh Thick-GEM (MM-THGEM), and is coupled to a delay-line board for particle localization. The prototype has an effective area of 10 × 10 cm 2 and is operated in isobutane at low pressure (7–10 Torr). We present and discuss a series of systematic evaluation tests performed by irradiating the detector with α-particles and fission fragments emitted by small-rate sources ( 241 Am, 249 Cf and 252 Cf). Position and time resolutions of about 0.42 mm and 1 ns were achieved, respectively. This work serves as a benchmark for the development of a large-scale array of detectors for experiments with fission and fission-like reaction products at the Facility for Rare Isotope Beams (FRIB).

Instruments & Instrumentation↗
DOE OSTI2020

High-energy ballistic electrons in low-pressure radio-frequency plasmas

This study demonstrates the presence of a small number of high-energy ballistic electrons (HEBEs) that originate from secondary electrons in low-pressure radio-frequency (rf) plasmas. The kinetic behaviors of the HEBEs are illustrated through electron energy probability functions from the fully kinetic particle-in-cell simulations, showing two wavy high-energy tails and two bifurcations during one rf cycle. Test-particle simulations and a semi-analytical method associated with nonlocal electron kinetics are performed to characterize the HEBE trajectories, which reveal the ballistic nature of the HEBEs and their typical bouncing features between the rf sheaths. Parameter dependence of the HEBEs on the discharge conditions (e.g., gas pressure, gap distance, and rf frequency) are identified, which is relevant to the plasma collisionality. With a pronounced presence of HEBEs, the overall impacts of the secondary electron emission on discharge parameters, such as electron power absorption and ionization rate, are also illustrated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Characterization of Porosity and Pore Accessibility of Vitrinite-Rich Bituminous and Subbituminous Coals by Small-Angle Neutron Scattering, Mercury Intrusion Porosimetry, and Low-Pressure N 2 Adsorption

Three bituminous and one subbituminous vitrinite-rich coals were characterized using small-angle neutron scattering with contrast matching, mercury intrusion porosimetry, and low-pressure N 2 adsorption techniques to quantify their porosity and pore accessibility in an effort to assess their solvent extractabilities, as a first approximation, for manufacturing useful end-products. The techniques revealed consistent results while complimenting one another. The total porosity was found to follow the coal rank with the lowest rank having the highest porosity within the studied coals. The amount of inaccessible pores was found to increase with rank for the bituminous coals studied here. Finally, the increase in the ease of accessibility and total porosity with decreasing rank suggested easier penetration of chemical reagents for solvent extraction, for example.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The System for Classification of Low-Pressure Systems (SyCLoPS): An All-In-One Objective Framework for Large-Scale Data Sets

We propose the first unified objective framework (SyCLoPS) for detecting and classifying all types of low-pressure systems (LPSs) in a given data set. We use the state-of-the-art automated feature tracking software TempestExtremes (TE) to detect and track LPS features globally in ERA5 and compute 16 parameters from commonly found atmospheric variables for classification. A Python classifier is implemented to classify all LPSs at once. The framework assigns 16 different labels (classes) to each LPS data point and designates four different types of high-impact LPS tracks, including tracks of tropical cyclone (TC), monsoonal system, subtropical storm and polar low. The classification process involves disentangling high-altitude and drier LPSs, differentiating tropical and non-tropical LPSs using novel criteria, and optimizing for the detection of the four types of high-impact LPS. A comparison of our labels with those in the International Best Track Archive for Climate Stewardship (IBTrACS) revealed an overall accuracy of 95% in distinguishing between tropical systems, extratropical cyclones, and disturbances. SyCLoPS produces a better TC detection skill compared to the previous algorithms, highlighted by an approximately 6% reduction in the false alarm rate compared to the previous TE algorithm. The vertical cross section composite of the four types of high-impact LPS we detect each shows distinct structural characteristics. Finally, we demonstrate that SyCLoPS is valuable for investigating various aspects of LPSs in climate data, such as the evolution of a single LPS track, patterns of LPS frequencies, and precipitation or wind influence associated with a particular LPS class.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Deep level defects in low-pressure chemical vapor deposition grown (010) β-Ga 2 O 3

This study provides the full-bandgap evaluation of defect state distributions in beta phase gallium oxide (β-Ga 2 O 3 ) grown by low-pressure chemical vapor deposition (LPCVD) on (010) β-Ga 2 O 3 substrates at high growth of up to 20 µm/h. Deep-level optical spectroscopy and deep-level transient spectroscopy measurements applied to Ni/β-Ga 2 O 3 Schottky diodes revealed the presence of a previously unreported defect state at E C -3.6 eV, which dominated the overall trap distribution in LPCVD grown material. However, states at E C -0.8 eV, E C -2.0 eV, and E C -4.4. eV were also detected, similar to prior studies on β-Ga 2 O 3 grown by other methods, with similar or lower concentrations for the LPCVD samples. The E C -0.8 eV and E C -2.0 eV states were previously connected to residual Fe impurities and gallium vacancies, respectively. The total concentration of traps in the LPCVD material was on par with or lower than the state-of-the-art metal–organic chemical vapor deposition-grown materials despite the much higher growth rate, and the distribution of states showed negligible dependence on SiCl 4 flow rate and doping concentration. These results demonstrate that the high growth rate of LPCVD-grown β-Ga 2 O 3 is very promising for achieving thick, low defect density, and high-quality layers needed for multi-kV device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

“Hybridizing heat-integrated 3D printed modules with mass manufacturable, low pressure drop fiber sorbents” (Final Report)

The overall objective of this proposal was to research, develop, and evaluate a modular direct air capture (DAC) system that is simple and scalable. This system was based on the adsorption of CO 2 into commercial polyamines supported by porous fiber sorbents, which can be produced at kilometer per hour scales using our pre-pilot spinning line. We have housed these fiber materials in novel 3D printed modular housing systems that provide easy-to-manufacture and localized heat integration and flow control. This hybridization of fiber sorbent technology with modular housing provided several advantages that led to lower air pressure drops, higher sorbent productivity, as well as ease of manufacturing and assembly unrivaled by existing and emerging heat integrated contactor designs. The modular housing was fabricated with the following features, at a minimum: (i) a tapered air intake to reduce pressure drop related to entrance effects, (ii) a structured network of heat transfer channels to enable localized cooling and heating during adsorption and desorption, respectively, and (iii) low pressure drop supports for the fiber sorbents. This hybrid manufacturing approach provides a facile method for taking fiber sorbents from lab scale to pilot scale as it dramatically simplifies the fabrication of heat integrated contactor structures.

42 ENGINEERING↗
DOE OSTI2026

A Dendrite-Resistant Sodium/Porous-Carbon Anode for Solid-State Batteries – Strategies and Challenges for Low-Pressure Operation

Sodium solid-state batteries (Na-SSB) have gained interest recently due to the abundance of Na over Li, but they still tend to fail due to dendrites under practical current densities and cycling capacities. To overcome this, Na-SSBs are frequently tested with impractically high applied pressure. In this work, a porous carbon interfacial layer is utilized in conjunction with Na-ß”-Al2O3 solid electrolytes to enable Na-cycling at milder cell pressures. This sodium/porous carbon layer enables improved solid-state Na cycling in symmetric cells, up to a current density of 10 mA cm-2 at 25 °C. Cycling up to 1 mAh cm-2 is challenging with low pressure, but 1 mAh cm-2 capacity can be reliably cycled at 1 mA cm-2 at an elevated temperature of 60 °C in symmetric cells. Finally, the evolution of the interface and sodium/carbon anode is evaluated with cryogenic ion-milling and cross-sectional imaging revealing that, depending on testing temperature, pressure, current density, and capacity, void formation, Na-extraction from porous carbon, delamination of the porous carbon matrix, or a combination of these occurs at the interface between Na-metal and BASE. Despite this, excellent dendrite resistance is achieved, and a full-cell design utilizing a Na-transition metal oxide cathode is still able to achieve an areal capacity of ~ 2.7 mAh cm-2 at 0.125 mA cm-2. This work demonstrates an alternative pathway toward a Na-metal anode for Na-SSBs without the requirement of excessive stack pressure.

low-cost↗
DOE OSTI2024

Trapping and actively transporting single particles of arbitrary properties in low-pressure rf plasmas with and without a magnetic field

We report the experimental realization of optical trapping and controlled manipulations of single particles of arbitrary properties, e.g., nano- to micrometer in size, transparent spheres to strongly light absorbing nonspherical particles, in low-pressure rf plasmas. First, we show optical trapping and transport of single particles in an unmagnetized rf plasma. Then, we show similar observations in a weakly magnetized rf plasma. This is the first demonstration of actively transporting (pushing and pulling) light-absorbing, nonspherical single particles in plasmas. The result suggests that optically trapped, actively controlled, single plasma dust particles (not limited to those externally sampled spheres) could be an in situ micro-probe for dusty plasma and magnetized dusty plasma diagnostics.

Physics↗