Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “loss factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Validation of an interior noise prediction model for a composite cylinder

An acoustic modal analysis has been performed in the cavity of a composite cylinder model of an aircraft fuselage. The filament wound, composite shell is 12 feet long and 5.5 feet in diameter. A one-half-in. thick plywood floor is attached to the shell 69 deg from the vertical centerline through the bottom of the shell. The acoustic modal frequencies were obtained from a sound pressure level and phase survey conducted throughout the interior volume bounded by the floor, endcaps and stiffened shell, while being excited by white noise from a loudspeaker source. The measured acoustic resonance frequencies and mode shapes compare well with analytical predictions from the Propeller Aircraft Interior Noise (PAIN) model. Details of the theory and derivation of the acoustic characteristics have been included. Reverberation time measurements, using the integrated impulse technique, have been performed to determine acoustic loss factors. These measured loss factors have been input to the PAIN program in order to more accurately predict the space-averaged interior noise of the composite cylinder.

Beyer, Todd B.↗
NASA NTRS1998

Comparison of Theory with Experimental Data For a Partially Covered Double-Sandwich Cantilever Beam

In this paper, vibration characteristics of a partially covered, double-sandwich cantilever beam are evaluated experimentally and compared to the theoretical results of Levy and Chen for partially covered beams with and without end mass. The results obtained indicate that the theoretical models serve very well in providing the frequency factors and loss factors for the system being investigated.

Chen, Qinghua↗
NASA NTRS1992

Vibration transmission through rolling element bearings. IV - Statistical energy analysis

A theoretical broadband coupling-loss factor is developed analytically for use in the statistical energy analysis (SEA) of a shaft-bearing-plate system. The procedure is based on the solution of the boundary-value problem at the plate-bearing interface and incorporates a bearing-stiffness matrix developed by the authors. Three examples are utilized to illustrate the SEA incorporating the coupling-loss factor including: (1) a shaft-bearing-plate system; (2) a plate-cantilevered beam; and (3) a circular-shaft-bearing plate. The coupling-loss factor in the case of the thin plate-cantilevered beam is found to be more accurate than that developed by Lyon and Eichler (1964). The coupling-loss factor is described for the bearing system and extended to describe the mean-square vibratory response of a rectangular plate. The proposed techniques are of interest to the study of vibration and noise in rotating machinery such as gearboxes.

Lim, T. C.↗
NASA NTRS1993

Solar array electrical performance assessment for Space Station Freedom

Electrical power for Space Station Freedom will be generated by large Photovoltaic arrays with a beginning of life power requirement of 30.8 kW per array. The solar arrays will operate in a Low Earth Orbit (LEO) over a design life of fifteen years. This paper provides an analysis of the predicted solar array electrical performance over the design life and presents a summary of supporting analysis and test data for the assigned model parameters and performance loss factors. Each model parameter and loss factor is assessed based upon program requirements, component analysis, and test data to date. A description of the LMSC performance model, future test plans, and predicted performance ranges are also given.

Smith, Bryan K.↗
NASA NTRS1993

Solar array electrical performance assessment for Space Station Freedom

Electrical power for Space Station Freedom will be generated by large photovoltaic arrays with a beginning of life power requirement of 30.8 kW per array. The solar arrays will operate in a Low Earth Orbit (LEO) over a design life of fifteen years. This paper provides an analysis of the predicted solar array electrical performance over the design life and presents a summary of supporting analysis and test data for the assigned model parameters and performance loss factors. Each model parameter and loss factor is assessed based upon program requirements, component analysis and test data to date. A description of the LMSC performance model future test plans and predicted performance ranges are also given.

Smith, Bryan K.↗
NASA NTRS2015

Magnetostrictive Vibration Damper and Energy Harvester for Rotating Machinery

Vibrations generated by machine driveline components can cause excessive noise and structural damage. Magnetostrictive materials, including Galfenol (iron-gallium alloys) and Terfenol-D (terbium-iron-dysprosium alloys), are able to convert mechanical energy to magnetic energy. A magnetostrictive vibration ring is proposed, which generates electrical energy and dampens vibration, when installed in a machine driveline. A 2D axisymmetric finite element (FE) model incorporating magnetic, mechanical, and electrical dynamics is constructed in COMSOL Multiphysics. Based on the model, a parametric study considering magnetostrictive material geometry, pickup coil size, bias magnet strength, flux path design, and electrical load is conducted to maximize loss factor and average electrical output power. By connecting various resistive loads to the pickup coil, the maximum loss factors for Galfenol and Terfenol-D due to electrical energy loss are identified as 0.14 and 0.34, respectively. The maximum average electrical output power for Galfenol and Terfenol-D is 0.21 W and 0.58 W, respectively. The loss factors for Galfenol and Terfenol-D are increased to 0.59 and 1.83, respectively, by using an L-C resonant circuit.

Magnetostrictive↗
NASA NTRS2008

Damping of High-temperature Shape Memory Alloys

Researchers at NASA Glenn Research Center have been investigating high temperature shape memory alloys as potential damping materials for turbomachinery rotor blades. Analysis shows that a thin layer of SMA with a loss factor of 0.04 or more would be effective at reducing the resonant response of a titanium alloy beam. Two NiTiHf shape memory alloy compositions were tested to determine their loss factors at frequencies from 0.1 to 100 Hz, at temperatures from room temperature to 300 C, and at alternating strain levels of 34-35x10(exp -6). Elevated damping was demonstrated between the M(sub s) and M(sub f) phase transformation temperatures and between the A(sub s) and A(sub f) temperatures. The highest damping occurred at the lowest frequencies, with a loss factor of 0.2-0.26 at 0.1 Hz. However, the peak damping decreased with increasing frequency, and showed significant temperature hysteresis in heating and cooling. Keywords: High-temperature, shape memory alloy, damping, aircraft engine blades, NiTiHf

Duffy, Kirsten P.↗
NASA NTRS1978

On sound transmission into a heavily-damped cylinder

A mathematical model for the transmission of sound into a thin monocoque cylindrical shell is discussed. The model is used to evaluate an oblique plane wave incident upon a flexible thin cylindrical shell. The solution is applicable to the transmission of sound under actual flight conditions. The model is then used to determine curves of cylinder-transmission loss for heavily damped cylinders. Numerical results are found for several plane-wave incidence angles for a narrow-bodied jet fuselage made of aluminum. It is noted that damping (i.e., the loss factor) increases, dips because of reduced cylinder resonances, and eventually disappears when the loss factor of the shell is large enough.

Koval, L. R.↗
NASA NTRS1981

Optimization and performance calculation of dual-rotation propellers

An analysis is given which enables the design of dual-rotation propellers. It relies on the use of a new tip loss factor deduced from T. Theodorsen's measurements coupled with the general methodology of C. N. H. Lock. In addition, it includes the effect of drag in optimizing. Some values for the tip loss factor are calculated for one advance ratio.

Davidson, R. E.↗
NASA NTRS1999

Vibration Analysis and Control of Flexible Beam by Using Smart Damping Structures

The temperature effects on frequency, loss factor and control of a flexible beam with a constrained viscoelastic layer and shape memory alloy layer (SMA) are discussed. It is shown that the temperature in the SMA (actuation) layer is very important in the determination of frequency and loss factor of such a structure. The effects of damping layer shear modulus and damping layer height as affected by the temperature are also discussed. As temperature plays such an important role, it is, therefore, imperative to evaluate temperature effects on the control of the system as well. Results with and without active control are discussed.

Chen, Q.↗
NASA NTRS2010

Impact of Damping Uncertainty on SEA Model Response Variance

Statistical Energy Analysis (SEA) is commonly used to predict high-frequency vibroacoustic levels. This statistical approach provides the mean response over an ensemble of random subsystems that share the same gross system properties such as density, size, and damping. Recently, techniques have been developed to predict the ensemble variance as well as the mean response. However these techniques do not account for uncertainties in the system properties. In the present paper uncertainty in the damping loss factor is propagated through SEA to obtain more realistic prediction bounds that account for both ensemble and damping variance. The analysis is performed on a floor-equipped cylindrical test article that resembles an aircraft fuselage. Realistic bounds on the damping loss factor are determined from measurements acquired on the sidewall of the test article. The analysis demonstrates that uncertainties in damping have the potential to significantly impact the mean and variance of the predicted response.

Schiller, Noah↗
NASA NTRS1984

The effects of the space environment on damping materials and damping designs on flexible structures

The effects of space environments on damping materials and damping designs on flexible structures were investigated. The following items were examined: damping of flexible spacecraft appendages; composite loss factor (n sub s) vs. time in high vacuum for damped test beams and damping of flexible structures. The STEP experiments show inherent damping of flexible structures in space effective possible damping design configurations for space structures, effects of passively damped components on the system loss factor of flexible structures and the effect of space environment on properties of damping materials.

Kluesener, M. F.↗
NASA NTRS1990

Statistical energy analysis of a geared rotor system

The vibroacoustic response of a generic geared rotor system is analyzed on an order of magnitude basis utilizing an approximate statistical energy analysis method. This model includes a theoretical coupling loss factor for a generic bearing component, which properly accounts for the vibration transmission through rolling element bearing. A simplified model of a NASA test stand that assumes vibratory energy flow from the gear mesh source to the casing through shafts and bearings is given as an example. Effects of dissipation loss factor and gearbox radiation efficiency models are studied by comparing predictions with NASA test results.

Lim, Teik C.↗
NASA NTRS1986

Modal characteristics of a stiffened composite cylinder with open and closed end conditions

The structural and acoustic modal frequencies and the loss factors of a composite fuselage model under free-free end and support-end conditions are evaluated. The fuselage model is a composite filament wound, cylindrical structure composed of carbon fibers embedded in an epoxy resin and has a ply orientation of +,-45, +,-32, 0, -,+32, and -,+45. A computer aided test system was utilized to obtain resonance frequencies, modal damping, and mode shape coefficients. Sound pressure and phase survey data are utilized to estimate acoustic modal freuencies and reverberation time was measured to calculate the acoustic loss factors. The derived structural and acoustic modal parameters are compared to analytical data from a computer prediction model. The data reveal that the acoustic modal frequencies and mode shape correlate well with predicted data, and there is fair agreement between structural modal frequencies and mode shape for the two data sets.

Grosveld, F. W.↗
NASA NTRS2007

Computing a Stability Spectrum by Use of the HHT

The Hilbert-Huang transform (HHT) is part of the mathematical basis of a method of calculating a stability spectrum. This method can be regarded as an extended and improved version of a prior HHT-based method of calculating a damping spectrum. In the prior method, information on positive damping (which leads to stability) and negative damping (which leads to instability) becomes mixed into a single squared damping loss factor. Hence, there is no way to distinguish between stability and instability by examining a damping spectrum. In contrast, in the present stabilityspectrum method, information on the mathematical sign of the damping is retained, making it possible to identify reThe Hilbert-Huang transform (HHT) is part of the mathematical basis of a method of calculating a stability spectrum. This method can be regarded as an extended and improved version of a prior HHT-based method of calculating a damping spectrum. In the prior method, information on positive damping (which leads to stability) and negative damping (which leads to instability) becomes mixed into a single squared damping loss factor. Hence, there is no way to distinguish between stability and instability by examining a damping spectrum. In contrast, in the present stabilityspectrum method, information on the mathematical sign of the damping is retained, making it possible to identify regions of instability in a spectrum. This method is expected to be especially useful for analyzing vibration-test data for the purpose of predicting vibrational instabilities in structures (e.g., flutter in airplane wings).

Huang, Norden E.↗
NASA NTRS1996

Sound Transmission through a Cylindrical Sandwich Shell with Honeycomb Core

Sound transmission through an infinite cylindrical sandwich shell is studied in the context of the transmission of airborne sound into aircraft interiors. The cylindrical shell is immersed in fluid media and excited by an oblique incident plane sound wave. The internal and external fluids are different and there is uniform airflow in the external fluid medium. An explicit expression of transmission loss is derived in terms of modal impedance of the fluids and the shell. The results show the effects of (a) the incident angles of the plane wave; (b) the flight conditions of Mach number and altitude of the aircraft; (c) the ratios between the core thickness and the total thickness of the shell; and (d) the structural loss factors on the transmission loss. Comparisons of the transmission loss are made among different shell constructions and different shell theories.

Tang, Yvette Y.↗
NASA NTRS2024

A Perspective on Multi-Source Energy Harvesting Technology Using Piezoelectric and Thermoelectric Materials

Energy harvesting using various locally available energy sources such as vibration energy, heat, sound, or magnetic field have become attractive topics for supplying power to modular electronic devices making them run independently in extreme environments. In this paper, we will be discussing the perspectives on thermoelectric (TE) and piezoelectric materials and devices, and then the concept of multi-source energy harvester using piezoelectric and thermoelectric devices and integration of them into a reliable and independent power source. TE materials having low thermal conductivity and high figure-of-merit ( zT ) are developed to convert even a small temperature gradient efficiently into electrical energy with the state-of-the-art conversion efficiency of ~15% and output power of ~56 W from single device. The piezoelectric device architecture is configured using high performance piezoelectric ceramics (Cu-Mn-PIN-PMN-PT). These ceramics exhibit high piezoelectric coefficient with high mechanical quality factor and low dielectric loss factor. Using these piezoelectric materials, power density as high a 2 mW/cm 2 is demonstrated in 1-1.5 g vibration environments. The piezoelectric device is attached on the surface of TE module to capture both the vibration and thermal energy sources to realize dual mode energy harvester. The multi-energy transfer strategy opens opportunities for a future generation of wireless and modular electronic devices. These devices would be useful in powering wearable electronic devices, micro sensor chargers, etc. in extreme environmental conditions using body heat/thermal sources and induced motion/vibrations.

Piezoelectric↗
NASA NTRS1944

The theory of propellers IV : thrust, energy, and efficiency formulas for single and dual rotating propellers with ideal circulation distribution

Simple and exact expressions are given for the efficiency of single and dual rotating propellers with ideal circulation distribution as given by the Goldstein functions for single-rotating propellers and by the new functions for dual-rotating propellers from part I of the present series. The efficiency is shown to depend primarily on a defined load factor and, to a very small extent, on an axial loss factor. Tables and charts are included for practical use of the results.

Theodorsen, Theodore↗