Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “loop transformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Thermodynamic guiding principles of high-capacity phase transformation materials for splitting H 2 O and CO 2 by thermochemical looping

Here, thermochemical looping splitting of water and carbon dioxide (CO 2 ) with greenhouse-gas-free (GHG-free) energy has the potential to help address the Gt-scale GHG emissions challenge. Reaction thermodynamics largely contributes to the main bottlenecks of cost reduction for thermochemical looping water/CO 2 splitting cycle. Here, we analyze thermodynamic driving forces in such cycles with two-phase ternary ferrites as model systems. We find that cation configurational entropy chiefly determines the change of partial molar entropy with oxygen stoichiometry. In addition, our phase diagram analysis accurately predicts the optimal Fe ratio for maximal water/CO 2 splitting capacity in thermal reduction and in chemical reduction based cycles, underlining the significance of phase boundary positions. With chemical reduction, >10% CO 2 conversion and high oxygen exchange capacity can both be achieved. Furthermore, our reduced Gibbs free energy model illustrates critical thermodynamic factors that influence the water/CO 2 splitting capacity. Our research reveals the thermodynamic driving forces underlying the unconventional high-capacity Fe-poor ferrites, further explained via phase diagrams of Fe–Co–O, Fe–Ni–O and Fe–Mg–O. Future materials improvements can be guided by our reduced Gibbs free energy model.

08 HYDROGEN↗
DOE OSTI2022

Low-Cost Recyclable Oxygen Carrier and Novel Process for Chemical Looping Combustion

The University of North Dakota, through its Institute for Energy Studies and Energy & Environmental Research Center, partnered with Envergex LLC, Barr Engineering and Microbeam Technologies to develop a transformational enabling technology for advancement of Chemical Looping Combustion technology. Industrial support was provided by Carbontec Energy Corporation. The project targeted the two biggest challenges to chemical looping combustion: (1) High costs of oxygen carrier replacement/loss due to expensive manufacturing and high replacement rates from physical attrition and/or decrease in reactivity, and (2) Inherently slow fuel char conversion which represents the rate-limiting step for chemical looping combustion and results in very large equipment sizes, and overall lower carbon dioxide capture efficiency. The project activities were addressed in a series of seven tasks. Task 1 extended throughout the entire project and oversaw project management and execution. Task 2 and 3 focused on development and evaluation of the novel oxygen carrier. Task 4 to 7 focused on design of the novel reactor, testing with the novel oxygen carrier and a techno-economic assessment of the process. The list of tasks are: Task 1 – Project management and planning, Task 2 – Laboratory scale oxygen carrier manufacturing and assessment, Task 3 – Modeling and laboratory-scale evaluation of oxygen carrier performance with coal, Task 4 – 10-kilowatt thermal integrated system installation, Task 5 – Scaled-up oxygen carrier manufacturing, Task 6 – 10-kilowatt testing, and Task 7 – Process design and techno-economic analysis.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2026

ROSE

Developed at Lawrence Livermore National Laboratory (LLNL), ROSE is an open source compiler infrastructure to build source-to-source program transformation and analysis tools for large-scale C (C89 to C23), C++ (C++98 to C++23), UPC, Fortran (Fortran4, 66, 77, 95, 2003), OpenMP, Java, Python, and Binary applications. ROSE users range from experienced compiler researchers to library and tool developers who may have minimal compiler experience. ROSE is particularly well suited for building custom tools for static analysis, program optimization, arbitrary program transformation, domain-specific optimizations, complex loop optimizations, performance analysis, and cyber-security. ROSE is: A library (and set of associated tools) to quickly and easily apply compiler techniques to one's code in order to improve application performance and developer productivity. A research and development compiler infrastructure for for writing custom source-to-source translators to perform source code transformations, analysis, and optimizations. Is

Pinnow, NathanT [Lawrence Livermore National Labor↗
DOE OSTI2022

One-Loop effective action approach to quantum MHV theory

It is well known that the MHV action, i.e. the action containing all the maximally helicity violating vertices, is alone not sufficient for loop computations. In order to develop loop contributions systematically and to ensure that there are no missing terms, we propose to formulate the quantum MHV action via one-loop effective action approach. The quadratic field fluctuations in the light cone Yang-Mills theory are explicitly integrated, followed by the classical canonical field transformation. We test the approach by calculating one loop (++++) and (+++) amplitudes, i.e. amplitudes that cannot be calculated from ordinary MHV action. Such an approach can be further used to unambiguously define loop corrections in other theories related to Yang-Mills theory by field transformations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Differentiable Quantum Programming with Unbounded Loops

The emergence of variational quantum applications has led to the development of automatic differentiation techniques in quantum computing. Existing work has formulated differentiable quantum programming with bounded loops, providing a framework for scalable gradient calculation by quantum means for training quantum variational applications. However, promising parameterized quantum applications, e.g., quantum walk and unitary implementation, cannot be trained in the existing framework due to the natural involvement of unbounded loops. To fill in the gap, we provide the first differentiable quantum programming framework with unbounded loops, including a newly designed differentiation rule, code transformation, and their correctness proof. Technically, we introduce a randomized estimator for derivatives to deal with the infinite sum in the differentiation of unbounded loops, whose applicability in classical and probabilistic programming is also discussed. We implement our framework with Python and Q# and demonstrate a reasonable sample efficiency. Through extensive case studies, we showcase an exciting application of our framework in automatically identifying close-to-optimal parameters for several parameterized quantum applications.

Computer Science↗
DOE OSTI2023

MLIR loop optimizations for High-Level Synthesis: a case study

High-Level Synthesis (HLS) tools simplify the design of hardware accelerators by automatically generating Verilog/VHDL code starting from a general purpose software programming language. They include a wide range of optimization techniques in the process, most of them performed on a low-level intermediate representation (IR) of the code. Introducing optimizations on a higher level of abstraction could significantly contribute to the automated design process results; for example, polyhedral techniques for the manipulation of loops could have a significant impact on the generated accelerators when applied on a specialized IR. We use loop pipelining as a case study to explore the introduction of compiler-based transformations on top of an existing HLS process. We leverage the Multi-Level Intermediate Representation (MLIR) framework and an external scheduler to implement the required transformations, and couple them with existing HLS tools to evaluate the improvements that loop pipelining brings to the performance of generated accelerators. The proposed approach can be integrated with other high-level transformations on the MLIR representation, combining different techniques to obtain pre-optimized inputs for HLS that do not have to rely on a specific backend tool.

Curzel, Serena↗
DOE OSTI2021

Toward polymer upcycling—adding value and tackling circularity

Plastics have revolutionized modern life, but have created a global waste crisis driven by our reliance and demand for low-cost, disposable materials. New approaches are vital to address challenges related to plastics waste heterogeneity, along with the property reductions induced by mechanical recycling. Chemical recycling and upcycling of polymers may enable circularity through separation strategies, chemistries that promote closed-loop recycling inherent to macromolecular design, and transformative processes that shift the life-cycle landscape. Polymer upcycling schemes may enable lower-energy pathways and minimal environmental impacts compared with traditional mechanical and chemical recycling. The emergence of industrial adoption of recycling and upcycling approaches is encouraging, solidifying the critical role for these strategies in addressing the fate of plastics and driving advances in next-generation materials design.

Korley, LaShanda T. J.↗
DOE OSTI2025

Quantum Aspects of Natural Top Quark Condensation

In top quark condensation the Brout-Englert-Higgs (BEH) boson is a $\bar{t}t$ bound state. With a UV completion of a single coloron exchange interaction, a recent semiclassical treatment gave a novel theory of the BEH boson as an extended object with composite scale $M_0\sim 6$ TeV. Presently we obtain the semiclassical theory as an effective action, using the source/Legendre transformation techniques of Jackiw, \etal, and fermion loop effects in the large-$N_c$ limit by deploying an auxiliary field to implement the sum of leading fermion loop diagrams. The theory remains natural at the loop level, with fine tuning at the level of a few %, and the effective coupling of the 4-fermion interaction, $\bar{g}_0^2$, is significantly enhanced by quantum loops over the fundamental coloron coupling, $g_0^2$. Hence a relatively weaker ``topcolor'' theory can produce critical coupling in the effective BEH bound state theory.

Hill, Christopher T. [Fermilab; Wisconsin U., Madi↗
DOE OSTI2023

Deployment of Dynamic Neural Network Optimization to Minimize Heat Rate During Ramping for Coal Power Plants (Final Technical Report)

Much success was achieved throughout the course of this project. A successful implementation of Dynamic Neural Network Optimization (D-NNO) was coupled with Adaptive Predictive Controls (APC) and a novel hardware installation comprised of an advanced sensor network (ASN) measuring mass-weighted averages of flue gas constituents above the horizontal superheater of a coal-fired utility boiler. From 2019 through 2023 (including an extension due to COVID delays), the team was able to prototype, evaluate, deploy, iterate, and ultimately finalize an advanced closed-loop control D-NNO system which demonstrated the ability to: •improve unit efficiency ~2.0% relative to unoptimized operation (represented as total fuel fired per MWh generated) •improve unit NOx emission rates 10%+ beyond static optimization baselines •improve unit temperature stability as much as 58% and on average 12% •improve operating load stability as much as 35% The culmination of this project has generated an advanced methodology of deploying specially designed recurrent neural networks (long short-term memory, gated recurrent unit, encoder-decoder networks, transformers, etc.), customized trajectory planning and closed-loop optimization modules capable of adapting to live electric grid responses and demands, self-tuning and adaptive expert controls constantly adjusting prediction parameters to real-time unit behavior, and a hardware/software package able to reliably calculate net unit heat rate (NUHR) in real-time using flue gas constituents, machine learning, and known combustion relationships. Through this real-time NUHR value, immediate feedback on system adjustments relative to operating efficiency was available, allowing for rapid improvements to system performance. In addition to development and deployment of the advanced D-NNO system, the approach methodology has been readily commercialized through the project platform Griffin Open Systems, LLC, the D-NNO software platform host. Similar methodologies to those developed by this project have already been deployed at 5 other units across the United States, with another 6 implementations scheduled, and more expected. Over the course of the project, multiple academic papers were submitted and accepted for publication within esteemed academic journals, and PhD students were trained and graduated, as well as undergraduate students becoming involved and participating to project objectives.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2023

Anomalous polarization reversal in strained thin films of CuIn⁢P 2 ⁢S 6

Strain-induced transitions of polarization reversal in thin films of a ferrielectric CuIn⁢P 2 ⁢S 6 (CIPS) with ideally conductive electrodes are explored using the Landau-Ginzburg-Devonshire approach with an eighth-order free energy expansion in polarization powers. Due to multiple potential wells, the height and position of which are temperature and strain dependent, the energy profiles of CIPS can flatten in the vicinity of the nonzero polarization states. Thereby, we reveal an unusually strong effect of a mismatch strain on the out-of-plane polarization reversal, hysteresis loop shape, dielectric susceptibility, and piezoelectric response of CIPS films. By varying the sign of the mismatch strain and its magnitude in a fairly narrow range, quasistatic hysteresisless paraelectric curves can transform into double, triple, and other types of pinched and single hysteresis loops. The strain effect on the polarization reversal is opposite, i.e., anomalous, in comparison with many other ferroelectric films, for which the out-of-plane remanent polarization and coercive field increase strongly for tensile strains and decrease or vanish for compressive strains. For definite values of temperature and mismatch strain, the low-frequency hysteresis loops of polarization may exhibit negative slope in a relatively narrow range of external field amplitude and frequency. The low-frequency susceptibility hysteresis loops, which correspond to the negative slope of polarization loops, contain only positive values, which can be giant in the entire range of field changes. In conclusion, the corresponding piezoresponse also reaches giant values, being maximal near coercive fields.

Dielectric properties↗
DOE OSTI2023

Effective Landau-type model of a Hf x Zr 1 - x O 2 -graphene nanostructure

Here, to describe the charge-polarization coupling in the nanostructure formed by a thin Hf x Zr 1-x O 2 film with a single-layer graphene as a top electrode, we develop the “effective” Landau-Ginzburg-Devonshire model. This approach is based on the parametrization of the Landau expansion coefficients for the polar (FE) and antipolar (AFE) orderings in thin Hf 1-x Zr x O 2 films from a limited number of polarization-field curves and hysteresis loops. The Landau expansion coefficients are nonlinearly dependent on the film thickness h and Zr/[Hf+Zr] ratio x, in contrast to h-independent and linearly x-dependent expansion coefficients of a classical Landau energy. We explain the dependence of the Landau expansion coefficients by the strong nonmonotonic dependence of the Hf 1-x Zr x O 2 film polar properties on the film thickness, grain size and surface energy. The proposed Landau free energy with five “effective” expansion coefficients, which are interpolation functions of x and h, describes the continuous transformation of polarization dependences on applied electric field and hysteresis loop shapes induced by the changes of x and h in the range 0 < x < 1 and 5 nm < h < 35 nm. Using the effective free energy, we demonstrated that the polarization of Hf 1-x Zr x O 2 film influences strongly on the graphene conductivity, and the full correlation between the distribution of polarization and charge carriers in graphene is revealed. In accordance with our modeling, the polarization of the (5 – 25) nm thick Hf 1-x Zr x O 2 films, which are in the ferroelectric-like or antiferroelectric-like states for the chemical compositions 0.35 ≤ x ≤ 0.95, determine the concentration of carriers in graphene and can control its field dependence. The result can be promising for creation of next generation Si-compatible nonvolatile memories and graphene-ferroelectric FETs, because the working voltages applied to the Hf 1-x Zr x O 2 film (which acts as a gate) can be relatively low (less than 2 V). These low voltages are sufficient to induce the pronounced hysteresis of ferroelectric polarization in the Hf 1-x Zr x O 2 gate, which, due to the strong electric coupling, induces the hysteresis of the graphene charge.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Upgrades to the ion cyclotron emission diagnostic on the DIII-D tokamak

The ion cyclotron emission diagnostic on the DIII-D tokamak comprises seven single-turn loops that measure high-frequency (1–100 MHz) magnetic field fluctuations that are often excited by energetic particles in the plasma. The raw voltage signals induced in the loops in response to these fluctuations travel through a series of cables, isolation transformer DC blocks, low-pass filters, and finally a digitizer before being analyzed in frequency space. The diagnostic has been recently upgraded, most notably to include four additional graphite tile loops and a new eight-channel digitizer. The previous three loops are all on the low-field side of the tokamak. The measurement capabilities of the system have been expanded by the addition of a new horizontally oriented loop on the low-field side, an additional toroidal loop on the low-field side, and two toroidal loops on the high-field side. These loops will be used to provide approximate mode polarization, improved toroidal mode number calculations, and information on modes in inward-shifted plasmas, respectively.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Enabling Grid-Forming Control Under Unbalanced Conditions

Standalone microgrids often experience unbalanced loading and faults, which can cause grid-forming control designed for balanced conditions to produce oscillatory responses. To address this issue, a compact time-domain transformation appropriate for inverter control is proposed, allowing the conversion of unbalanced three-phase signals to positive and negative synchronous reference frames. This transformation supports the development of a grid-forming control with fault ride-through, featuring frequency and voltage droop controllers and nested current and voltage control loops that seamlessly integrate an enhanced current limiter. The effectiveness of the proposed control and transformation is demonstrated through analytical results and electromagnetic transient simulation.

24 - POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Integrating the full four-loop negative geometries and all-loop ladder-type negative geometries in ABJM theory

The decomposition of the four-point ABJM amplituhedron into negative geometries produces compact integrands of logarithmic of amplitudes such that the infrared divergence only comes from the last loop integration, from which we can compute the cusp anomalous dimension of the ABJM theory. In this note, we integrate L – 1 loop momenta of the L-loop negative geometries for all four-loop negative geometries and a special class of all-loop ladder-type negative geometries by a method based on Mellin transformation, and from these finite quantities we extract the corresponding contribution to the cusp anomalous dimension. We find that the infrared divergence of a box-type negative geometry at L = 4 is weaker than other negative geometries, then only tree-type negative geometries contribute to the cusp anomalous dimension at L = 4. For the all-loop ladder-type negative geometries, we prove and conjecture some recursive structures as integral equations in Mellin space and find that they cannot contribute zeta values like ζ 3 , ζ 5 to the cusp anomalous dimension.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

On amplitudes and field redefinitions

We derive an off-shell recursion relation for correlators that holds at all loop orders. This allows us to prove how generalized amplitudes transform under generic field redefinitions, starting from an assumed behavior of the one-particle-irreducible effective action. The form of the recursion relation resembles the operation of raising the rank of a tensor by acting with a covariant derivative. This inspires a geometric interpretation, whose features and flaws we investigate.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Seeding the Electrothermal Instability through a Three-Dimensional, Nonlinear Perturbation

Electrothermal instability plays an important role in applications of current-driven metal, creating striations (which seed the magneto–Rayleigh-Taylor instability) and filaments (which provide a more rapid path to plasma formation). However, the initial formation of both structures is not well understood. Here, simulations show for the first time how a commonly occurring isolated defect transforms into the larger striation and filament, through a feedback loop connecting current and electrical conductivity. Simulations have been experimentally validated using defect-driven self-emission patterns.

42 ENGINEERING↗
DOE OSTI2022

Device Voltage Stress from Ground Leakage Current in Medium-Voltage Solid-State Transformer

Grounding related issues are critical for safe and reliable operation of solid-state transformer (SST) in medium-voltage (MV) applications, e.g., solar photovoltaic and energy storage integration, date center, electric vehicle fast charging, etc. This article presents for the first time the issue of additional device voltage stress due to grounding-loop current in current-source SST, using the soft-switching solid-state transformer (S4T) as an example. The S4T features single-stage isolated AC-AC, AC-DC, or DC-DC conversion with full-range ZVS, derived from flyback converter or current-source converter (CSC). However, the flyback operation for CSC-based SST means that magnetizing current flows through the reverse-blocking devices on only one side of the medium-frequency transformer (MFT) at a time. Then, the voltages across the devices, especially those on the other side of the MFT, can be influenced by parasitic current. A parasitic model of a modular S4T (M-S4T) prototype is developed from direct measurements and datasheets. Using the developed parasitic model and equivalent circuits, the causes of the voltage stress are analyzed. A voltage-stress mitigation scheme of connecting additional grounding capacitors is proposed. Damping resistors are also installed to damp out the grounding-loop resonance. A robust parameter design of the proposed scheme is given. The existence of the voltage stress issue and the effectiveness of the proposed scheme are verified experimentally on an MV SiC M-S4T prototype with inherent parameter variations among the five modules in the prototype. Here, both single-module and stacked-module operation are demonstrated during steady state and dynamic conditions up to 4 kV peak.

42 ENGINEERING↗