Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “longitudinal phase space”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

High-power diode lasers for optical communications applications

High-power, single-mode, double-heterojunction AlGaAs diode lasers are being developed to meet source requirements for both fiber optic local area network and free space communications systems. An individual device, based on the channeled-substrate-planar (CSP) structure, has yielded single spatial and longitudinal mode outputs of up to 90 mW CW, and has maintained a single spatial mode to 150 mW CW. Phase-locked arrays of closely spaced index-guided lasers have been designed and fabricated with the aim of multiplying the outputs of the individual devices to even higher power levels in a stable, single-lobe, anastigmatic beam. The optical modes of the lasers in such arrays can couple together in such a way that they appear to be emanating from a single source, and can therefore be efficiently coupled into optical communications systems. This paper will review the state of high-power laser technology and discuss the communication system implications of these devices.

Carlin, D. B.↗
DOE OSTI2024

The optimal use of segmentation for sampling calorimeters

One of the key design choices of any sampling calorimeter is how fine to make the longitudinal and transverse segmentation. Here, to inform this choice, we study the impact of calorimeter segmentation on energy reconstruction. To ensure that the trends are due entirely to hardware and not to a sub-optimal use of segmentation, we deploy deep neural networks to perform the reconstruction. These networks make use of all available information by representing the calorimeter as a point cloud. To demonstrate our approach, we simulate a detector similar to the forward calorimeter system intended for use in the ePIC detector, which will operate at the upcoming Electron Ion Collider. We find that for the energy estimation of isolated charged pion showers, relatively fine longitudinal segmentation is key to achieving an energy resolution that is better than 10% across the full phase space. These results provide a valuable benchmark for ongoing EIC detector optimizations and may also inform future studies involving high-granularity calorimeters in other experiments at various facilities.

47 OTHER INSTRUMENTATION↗
NASA NTRS1981

Spatial and temporal variations of monthly mean total columnar ozone derived from 7 years of BUV data

Ninth-degree spherical harmonic models are used to represent monthly mean total columnar ozone fields, with spatial spectra defined in terms of simple analytic expressions representing the rms value of each spherical harmonic coefficient. The spectra are combined with estimation theory techniques to develop a realistic error analysis accounting for errors due to nonglobal coverage. Amplitude and phase variations for longitudinal waves one, two and three are presented, and it is shown that these waves reinforce in space and time in the period of high poleward ozone transport in the northern hemisphere. In the southern hemisphere, the wave two and three components are much smaller, with wave one maximum amplitude occurring in September and October.

Tolson, R. H.↗
DOE OSTI2024

OPTIMIZATION OF COOLING DISTRIBUTION OF THE EIC SHC COOLER ERL

The Electron-Ion Collider (EIC) Hadron Storage Ring (HSR) will use strong hadron cooling to maintain the beam brightness and high luminosity during long collision ex?periments. An Energy Recovery Linac is used to deliver the high-current high-brightness electron beam for cooling. For the best cooling effect, the electron beam requires low emittance, small energy spread, and uniform longitudinal distribution. In this work, we simulate and optimize the longitudinal laser-beam distribution shaping at the photo?cathode, modeling space charge forces accurately. Machine parameters such as RF cavity phases are optimized in con?junction with the beam distribution using a genetic optimizer. We demonstrate improvement of the cooling distribution in key parameters.

Wang, N.↗
DOE OSTI2025

Sensitivity to longitudinal vector boson scattering and doubly charged Higgs boson production in $W^± W^± jj$ at future hadron colliders

We study the sensitivity to longitudinal vector boson scattering at a 27-, 50-, and 100-TeV pp collider using events containing two leptonically decaying same-electric-charge 𝑊 bosons produced in association with two jets. The baseline FCC-hh detector parametrization within the D ELPHES framework is used under the assumption of fully efficient pileup mitigation. A tightly constrained phase space with a dijet mass greater than 2 TeV is considered in order to suppress the impact of potential instrumental backgrounds. Based on this setup, the expected sensitivity to the production of longitudinally polarized same-sign 𝑊 boson pairs is evaluated. Additionally, expected limits are set on doubly charged Higgs bosons produced via vector boson fusion processes and decaying to same-sign 𝑊 boson pairs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1982

Space Shuttle flying qualities and flight control system assessment study

The suitability of existing and proposed flying quality and flight control system criteria for application to the space shuttle orbiter during atmospheric flight phases was assessed. An orbiter experiment for flying qualities and flight control system design criteria is discussed. Orbiter longitudinal and lateral-directional flying characteristics, flight control system lag and time delay considerations, and flight control manipulator characteristics are included. Data obtained from conventional aircraft may be inappropriate for application to the shuttle orbiter.

Myers, T. T.↗
NASA NTRS1972

Space shuttle: A comparison of wind tunnel facility data on the Grumman H-33 delta winged orbiter

A comparison of longitudinal and lateral directional stability and control characteristics of the Phase B Grumman H-33 orbiter configuration obtained from 6 tests conducted in 4 different facilities is presented. The H-33 orbiter configuration does not include drop tanks. Slope data are used as the medium for comparison. The slope data were computed using the SADSAC system and have been reduced to a common reference system. Data used for comparison were selected based on common configurations wherever possible. Where direct configuration comparisons were not possible, the parameters selected for comparison are regarded as insensitive to the noted differences. Factors considered in comparing the various data were scaling effects, balance operating ranges, balance sensitivities and control deflection accuracies. All factors considered, the comparison among data obtained from the various facilities is excellent. The minor differences in stability and control characteristics are well within the accuracy band of preliminary design model construction specifications.

Gyorfi, R. A.↗
NASA NTRS2013

Simplified Aircraft-Based Paired Approach: Concept Definition and Initial Analysis

Simplified Aircraft-based Parallel Approach (SAPA) is an advanced concept proposed by the Federal Aviation Administration (FAA) to support dependent parallel approach operations to runways with lateral spacing closer than 2500 ft. At the request of the FAA, NASA performed an initial assessment of the potential performance and feasibility of the SAPA concept, including developing and assessing an operational implementation of the concept and conducting a Monte Carlo wake simulation study to examine the longitudinal spacing requirements. The SAPA concept was shown to have significant operational advantages in supporting the pairing of aircraft with dissimilar final approach speeds. The wake simulation study showed that support for dissimilar final approach speeds could be significantly enhanced through the use of a two-phased altitudebased longitudinal positioning requirement, with larger longitudinal positioning allowed for higher altitudes out of ground effect and tighter longitudinal positioning defined for altitudes near and in ground effect. While this assessment is preliminary and there are a number of operational issues still to be examined, it has shown the basic SAPA concept to be technically and operationally feasible.

Johnson, Sally C.↗
NASA NTRS2013

Electro-Optic Time-to-Space Converter for Optical Detector Jitter Mitigation

A common problem in optical detection is determining the arrival time of a weak optical pulse that may comprise only one to a few photons. Currently, this problem is solved by using a photodetector to convert the optical signal to an electronic signal. The timing of the electrical signal is used to infer the timing of the optical pulse, but error is introduced by random delay between the absorption of the optical pulse and the creation of the electrical one. To eliminate this error, a time-to-space converter separates a sequence of optical pulses and sends them to different photodetectors, depending on their arrival time. The random delay, called jitter, is at least 20 picoseconds for the best detectors capable of detecting the weakest optical pulses, a single photon, and can be as great as 500 picoseconds. This limits the resolution with which the timing of the optical pulse can be measured. The time-to-space converter overcomes this limitation. Generally, the time-to-space converter imparts a time-dependent momentum shift to the incoming optical pulses, followed by an optical system that separates photons of different momenta. As an example, an electro-optic phase modulator can be used to apply longitudinal momentum changes (frequency changes) that vary in time, followed by an optical spectrometer (such as a diffraction grating), which separates photons with different momenta into different paths and directs them to impinge upon an array of photodetectors. The pulse arrival time is then inferred by measuring which photodetector receives the pulse. The use of a time-to-space converter mitigates detector jitter and improves the resolution with which the timing of an optical pulse is determined. Also, the application of the converter enables the demodulation of a pulse position modulated signal (PPM) at higher bandwidths than using previous photodetector technology. This allows the creation of a receiver for a communication system with high bandwidth and high bits/photon efficiency.

Birnbaum, Kevin↗
NASA NTRS1986

Preliminary results toward injection locking of an incoherent laser array

The preliminary results of phase locking an incoherent laser array to a master source in an attempt to achieve coherent operation are presented. The techniques necessary to demonstrate phase locking are described along with some topics for future consideration. As expected, the results obtained suggest that injection locking of an array, where the spacing between adjacent longitudinal modes of its elements is significantly larger than the locking bandwidth, may not be feasible.

Daher, J.↗
NASA NTRS1973

Low-subsonic aerodynamic characteristics of a 60 deg swept delta wing space shuttle orbiter

An investigation was conducted in the Langley low-turbulence pressure tunnel to determine Reynolds number effects on the low-subsonic areodynamic characteristics and longitudinal control effectiveness of a North American Rockwell phase B delta-wing orbiter concept designated 134D. The model was tested over a range of Reynolds numbers, based on body length, from 5.25 million to 29.4 million, at Mach numbers less than 0.35, at angles of attack from approximately -2 to 28, and at angles of sideslip of 0 and -6.

Freeman, D. C., Jr.↗
NASA NTRS1977

A technique for simulating turbulence for aerospace vehicle flight simulation studies

An atmospheric turbulence model which accommodates variability of turbulence properties along an aerospace vehicle trajectory was developed. The technique involves the use of Dryden spectral forms in which the defining parameters are the standard deviations (sigma) and integral scales (L) of turbulence. These spectra are expressed as nondimensional functions of the nondimensional frequency Omega = omega L/V where omega is dimensional radian frequency and V is the true air speed of the aerospace vehicle. The nondimensional spectra are factored by standard techniques to obtain nondimensional linear recursive filters in the time domain whereby band-limited white-like noise can be operated upon to obtain nondimensional longitudinal, lateral, and vertical turbulence velocities, as functions of nondimensional time, tV/L, where t is time. Application of the technique to the simulation of the space shuttle orbiter entry flight phase is discussed.

Fichtl, G. H.↗
NASA NTRS2012

Theory of a Traveling Wave Feed for a Planar Slot Array Antenna

Planar arrays of waveguide-fed slots have been employed in many radar and remote sensing applications. Such arrays are designed in the standing wave configuration because of high efficiency. Traveling wave arrays can produce greater bandwidth at the expense of efficiency due to power loss in the load or loads. Traveling wave planar slot arrays may be designed with a long feed waveguide consisting of centered-inclined coupling slots. The feed waveguide is terminated in a matched load, and the element spacing in the feed waveguide is chosen to produce a beam squinted from the broadside. The traveling wave planar slot array consists of a long feed waveguide containing resonant-centered inclined coupling slots in the broad wall, coupling power into an array of stacked radiating waveguides orthogonal to it. The radiating waveguides consist of longitudinal offset radiating slots in a standing wave configuration. For the traveling wave feed of a planar slot array, one has to design the tilt angle and length of each coupling slot such that the amplitude and phase of excitation of each radiating waveguide are close to the desired values. The coupling slot spacing is chosen for an appropriate beam squint. Scattering matrix parameters of resonant coupling slots are used in the design process to produce appropriate excitations of radiating waveguides with constraints placed only on amplitudes. Since the radiating slots in each radiating waveguide are designed to produce a certain total admittance, the scattering (S) matrix of each coupling slot is reduced to a 2x2 matrix. Elements of each 2x2 S-matrix and the amount of coupling into the corresponding radiating waveguide are expressed in terms of the element S11. S matrices are converted into transmission (T) matrices, and the T matrices are multiplied to cascade the coupling slots and waveguide sections, starting from the load end and proceeding towards the source. While the use of non-resonant coupling slots may provide an additional degree of freedom in the design, resonant coupling slots simplify the design process. The amplitude of the wave going to the load is set at unity. The S11 parameter, r of the coupling slot closest to the load, is assigned an arbitrary value. A larger value of r will reduce the power dissipated in the load while increasing the reflection coefficient at the input port. It is now possible to obtain the excitation of the radiating waveguide closest to the load and the coefficients of the wave incident and reflected at the input port of this coupling slot. The next coupling slot parameter, r , is chosen to realize the excitation of that radiating waveguide. One continues this process moving towards the source, until all the coupling slot parameters r and hence the S11 parameter of the 4-port coupler, r, are known for each coupling slot. The goal is to produce the desired array aperture distribution in the feed direction. From an interpolation of the computed moment method data for the slot parameters, all the coupling slot tilt angles and lengths are obtained. From the excitations of the radiating waveguides computed from the coupling values, radiating slot parameters may be obtained so as to attain the desired total normalized slot admittances. This process yields the radiating slot parameters, offsets, and lengths. The design is repeated by choosing different values of r for the last coupling slot until the percentage of power dissipated in the load and the input reflection coefficient values are satisfactory. Numerical results computed for the radiation pattern, the tilt angles and lengths of coupling slots, and excitation phases of the radiating waveguides, are presented for an array with uniform amplitude excitation. The design process has been validated using computer simulations. This design procedure is valid for non-uniform amplitude excitations as well.

Rengarajan, Sembiam↗
NASA NTRS2009

Fiber Laser Development for LISA

We have developed a linearly-polarized Ytterbium-doped fiber ring laser with single longitudinal-mode output at 1064nm for LISA and other space applications. Single longitudinal-mode selection was achieved by using a fiber Bragg grating (FBG) and a fiber Fabry-Perot (FFP). The FFP also serves as a frequency-reference within our ring laser. Our laser exhibits comparable low frequency and intensity noise to Non-Planar Ring Oscillator (NPRO). By using a fiber-coupled phase modulator as a frequency actuator, the laser frequency can be electro-optically tuned at a rate of 100kHz. It appears that our fiber ring laser is promising for space applications where robustness of fiber optics is desirable.

Numata, Kenji↗
DOE OSTI2025

Giant quantum oscillations in thermal transport in low-density metals via electron absorption of phonons

Oscillations of conductance observed in strong magnetic fields are a striking manifestation of the quantum dynamics of charge carriers in solids. The large charge carrier density in typical metals sets the scale of oscillations in both electrical and thermal conductivity, which characterize the Fermi surface. In semimetals, thermal transport at low-charge carrier density is expected to be phonon dominated, yet several experiments observe giant quantum oscillations in thermal transport. This raises the question of whether there is an overarching mechanism leading to sizable oscillations that survives in phonon-dominated semimetals. In this work, we show that such a mechanism exists. It relies on the peculiar phase-space allowed for phonon scattering by electrons when only a few Landau levels are filled. Our measurements on the Dirac semimetal ZrTe 5 support this counterintuitive mechanism through observation of pronounced thermal quantum oscillations, since they occur in similar magnitude and phase in directions parallel and transverse to the magnetic field. Our phase-space argument applies to all low-density semimetals, topological or not, including graphene and bismuth. Our work illustrates that phonon absorption can be leveraged to reveal degrees of freedom through their imprint on longitudinal thermal transport.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Signatures of QCD conductivities in heavy-ion collisions

Dissipative processes are pivotal for understanding the hydrodynamic evolution of hot and dense quantum chromodynamics (QCD) matter created in relativistic nuclear collisions. The interplay of multiple conserved charges—net baryon, strangeness, and electric charge—is of particular interest. Here, we simulate the longitudinal hydrodynamic evolution with the three diffusion currents in a hydrodynamic model with a lattice-QCD-based equation of state, NEOS -4 D , and estimate rapidity distributions including diffusive corrections to the phase-space distribution in the presence of multiple charges, which ensure charge conservation at particlization. We determine the response of particle yields at midrapidity to changes in the diagonal and off-diagonal conductivities. Inversely, we find that most components of the conductivity matrix can be constrained experimentally using identified particle multiplicities at different collision energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Coordinate versus momentum cuts and effects of collective flow on critical fluctuations

We analyze particle number fluctuations in the crossover region near the critical endpoint of a first-order phase transition by utilizing molecular dynamics simulations of the classical Lennard-Jones fluid. We extend our previous study [V. A. Kuznietsov , ] by incorporating longitudinal collective flow. The scaled variance of particle number distribution inside different coordinate and momentum space acceptances is computed through ensemble averaging and found to agree with earlier results obtained using time averaging, validating the ergodic hypothesis for fluctuation observables. Presence of a sizable collective flow is found to be essential for observing large fluctuations from the critical point in momentum space acceptances. We discuss our findings in the context of heavy-ion collisions. Published by the American Physical Society 2024

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗