Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “local atomic vibrations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Atomistic nature of amorphous graphite

This paper focuses on the structural, electronic, and vibrational features of amorphous graphite [R. Thapa et al, Phys. Rev. Lett., 2022, 128, 236402]. The structural order in amorphous graphite is discussed and compared with graphite and amorphous carbon. The electronic density of states and localization in these phases were analyzed. Spatial projection of charge densities in the π bands showed a high charge concentration on participating atoms in connecting hexagons. A vibrational density of states was computed and is potentially an experimentally testable fingerprint of the material. An analysis of the vibrational modes was carried out using the phase quotient, and the mode stretching character. The average thermal conductivity calculated for aG was 0·85 and 0·96 W/cmK at room temperature and 1000 K, respectively.

Chemistry↗
DOE OSTI2021

Spin-dependent vibronic response of a carbon radical ion in two-dimensional WS 2

Atomic spin centers in 2D materials are a highly anticipated building block for quantum technologies. Here, we demonstrate the creation of an effective spin-1/2 system via the atomically controlled generation of magnetic carbon radical ions (CRIs) in synthetic two-dimensional transition metal dichalcogenides. Hydrogenated carbon impurities located at chalcogen sites introduced by chemical doping are activated with atomic precision by hydrogen depassivation using a scanning probe tip. In its anionic state, the carbon impurity is computed to have a magnetic moment of 1 μ B resulting from an unpaired electron populating a spin-polarized in-gap orbital. We show that the CRI defect states couple to a small number of local vibrational modes. The vibronic coupling strength critically depends on the spin state and differs for monolayer and bilayer WS 2 . The carbon radical ion is a surface-bound atomic defect that can be selectively introduced, features a well-understood vibronic spectrum, and is charge state controlled.

36 MATERIALS SCIENCE↗
DOE OSTI2021

AFM-IR and s-SNOM-IR measurements of chemically addressable monolayers on Au nanoparticles

The performance of catalysts depends on their nanoscale properties, and local variations in structure and composition can have a dramatic impact on the catalytic reactivity. Therefore, probing the localized reactivity of catalytic surfaces using high spatial resolution vibrational spectroscopy, such as infrared (IR) nanospectroscopy and tip-enhanced Raman spectroscopy, is essential for mapping their reactivity pattern. Two fundamentally different scanning probe IR nanospectroscopy techniques, namely, scattering-type scanning near-field optical microscopy (sSNOM) and atomic force microscopy-infrared spectroscopy (AFM-IR), provide the capabilities for mapping the reactivity pattern of catalytic surfaces with a spatial resolution of ~20 nm. Herein, we compare these two techniques with regard to their applicability for probing the vibrational signature of reactive molecules on catalytic nanoparticles. For this purpose, we use chemically addressable self-assembled molecules on Au nanoparticles as model systems. We identified significant spectral differences depending on the measurement technique, which originate from the fundamentally different working principles of the applied methods. While AFM-IR spectra provided information from all the molecules that were positioned underneath the tip, the s-SNOM spectra were more orientation-sensitive. Due to its field-enhancement factor, the s-SNOM spectra showed higher vibrational signals for dipoles that were perpendicularly oriented to the surface. The s-SNOM sensitivity to the molecular orientation influenced the amplitude, position, and signal-to-noise ratio of the collected spectra. Ensemble-based IR measurements verified that differences in the localized IR spectra stem from the enhanced sensitivity of s-SNOM measurements to the adsorption geometry of the probed molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Uncovering fast solid-acid proton conductors based on dynamics of polyanion groups and proton bonding strength

Achieving high proton conductivity in inorganic solids is key for advancing many electrochemical technologies, including low-energy nano-electronics and energy-efficient fuel cells and electrolyzers. A quantitative understanding of the physical traits of a material that regulate proton diffusion is necessary for accelerating the discovery of fast proton conductors. In this work, we have mapped the structural, chemical and dynamic properties of solid acids to the elementary steps of the Grotthuss mechanism of proton diffusion. Our approach combines ab initio molecular dynamics simulations, analysis of phonon spectra and atomic structure calculations. We have identified the donor–hydrogen bond lengths and the acidity of polyanion groups as key descriptors of local proton transfer and the vibrational frequencies of the cation framework as the key descriptor of lattice flexibility. The latter facilitates rotations of polyanion groups and long-range proton migration in solid acid proton conductors. The calculated lattice flexibility also correlates with the experimentally reported superprotonic transition temperatures. Using these descriptors, we have screened the Materials Project database and identified potential solid acid proton conductors with monovalent, divalent and trivalent cations, including Ag + , Sr 2+ , Ba 2+ and Er 3+ cations, which go beyond the traditionally considered monovalent alkali cations (Cs + , Rb + , K + , and NH 4 + ) in solid acids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Distilling nanoscale heterogeneity of amorphous silicon using tip-enhanced Raman spectroscopy (TERS) via multiresolution manifold learning

Abstract Accurately identifying the local structural heterogeneity of complex, disordered amorphous materials such as amorphous silicon is crucial for accelerating technology development. However, short-range atomic ordering quantification and nanoscale spatial resolution over a large area on a-Si have remained major challenges and practically unexplored. We resolve phonon vibrational modes of a-Si at a lateral resolution of <60 nm by tip-enhanced Raman spectroscopy. To project the high dimensional TERS imaging to a two-dimensional manifold space and categorize amorphous silicon structure, we developed a multiresolution manifold learning algorithm. It allows for quantifying average Si-Si distortion angle and the strain free energy at nanoscale without a human-specified physical threshold. The multiresolution feature of the multiresolution manifold learning allows for distilling local defects of ultra-low abundance (< 0.3%), presenting a new Raman mode at finer resolution grids. This work promises a general paradigm of resolving nanoscale structural heterogeneity and updating domain knowledge for highly disordered materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Hydrogenation of calcite and change in chemical bonding at high pressure: Diamond formation above 100GPa

Synchrotron X-ray diffraction (XRD) and Raman spectroscopy in laser heated diamond anvil cells and first principles molecular dynamics (FPMD) calculations have been used to investigate the reactivity of calcite and molecular hydrogen (H 2 ) at high pressures up to 120 GPa. We find that hydrogen reacts with calcite starting below 0.5 GPa at room temperature forming chemical bonds with carbon and oxygen. This results in the unit cell volume expansion; the hydrogenation level is much higher for powdered samples. Single-crystal XRD measurements at 8–24 GPa reveal the presence of previously reported III, IIIb, and VI calcite phases; some crystallites show up to 4% expansion, which is consistent with the incorporation of ≤ 1 hydrogen atom per formula unit. At 40–102 GPa XRD patterns of hydrogenated calcite demonstrate broadened features consistent with the calcite VI structure with incorporated hydrogen atoms. Above 80 GPa, the C–O stretching mode of calcite splits suggesting a change in the coordination of C–O bonds. Laser heating at 110 GPa results in the formation of C–C bonds manifested in the crystallization of diamond recorded by in situ XRD at 300 K and 110 GPa and by Raman spectroscopy on recovered samples commenced with C 13 calcite. We explored several theoretical models, which show that incorporation of atomic hydrogen results in local distortions of CO 3 groups, formation of corner-shared C–O polyhedra, and chemical bonding of H to C and O, which leads to the lattice expansion and vibrational features consistent with the experiments. In conclusion, the experimental and theoretical results support recent reports on tetrahedral C coordination in high-pressure carbonate glasses and suggest a possible source of the origin of ultradeep diamonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Coexistence of vitreous and crystalline phases of H 2 O at ambient temperature

Formation of vitreous ice during rapid compression of water at room temperature is important for biology and the study of biological systems. Here, we show that Raman spectra of rapidly compressed water at greater than 1 GPa at room temperature exhibits the signature of high-density amorphous ice, whereas the X-ray diffraction (XRD) pattern is dominated by crystalline ice VI. To resolve this apparent contradiction, we used molecular dynamics simulations to calculate full vibrational spectra and diffraction patterns of mixtures of vitreous ice and ice VI, including embedded interfaces between the two phases. We show quantitatively that Raman spectra, which probe the local polarizability with respect to atomic displacements, are dominated by the vitreous phase, whereas a small amount of the crystalline component is readily apparent by XRD. The results of our combined experimental and theoretical studies have implications for detecting vitreous phases of water, survival of biological systems under extreme conditions, and biological imaging. The results provide additional insight into the stable and metastable phases of H 2 O as a function of pressure and temperature, as well as of other materials undergoing pressure-induced amorphization and other metastable transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Discovery of Dielectric Response and Forces in Sub-Nanoscale Objects (Final Technical Report)

This is the final technical report for DOE Award DE-SC0005132 entitled “Discovery of Dielectric Response and Forces in Sub-Nanoscale Objects.” This award originated on August 15, 2010 with Principle Investigator Prof. Phil Batson of Rutgers, The State University of New Jersey. Prof. Batson transitioned to Professor Emeritus status on January 31, 2023. At that time PI status was transferred to Prof. Robert Bartynski of the Department of Physics and Astronomy at Rutgers, The State University of New Jersey, and Director of the Rutgers Laboratory for Surface Modification. The central theme of the research performed under this award is develop and refine a NION aberration-corrected Scanning Transmission Electron Microscope to attain atomic spatial resolution and sub 10meV energy resolution in electron energy loss spectroscopy (EELS) performed on the transmitted electron beam. These capabilities allow examination of the excitation properties (primarily plasmonic and vibrational [ie., phonons] of nanoscale objects when excited with a highly-localized (~ Angstrom-scale) high energy (~ 60 keV) electron beam. Direct excitations (i.e., the response to electrons impinging directly on the sample) as well as excitations in response to the dynamic electric (and magnetic!) fields of an aloof electron beam (i.e., a beam that is close to but displaced from the target) have been studied. Our experimental work has benefited greatly from close collaborations with theoretical colleagues, but at Rutgers and from around the world, providing a much more complete understanding of the observed phenomena and suggesting avenues for further study and practical applications. This report summarizes the technical and scientific achievements accomplished during the entire award period. More extensive details are available in the Progress Reports that have already been filed with the Department of Energy. The report is divided into six sections. The first four sections focus on exploring, developing and understanding several unique capabilities and phenomena discovered and accessible owing to the high spatial- and energy-resolution we have been able to achieve. The latter two sections focus on applications of the STEM’s novel capabilities to study atomic- and nanometer-scale properties of solids, as well as broader applications to advanced and bio-materials.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Linear versus Bent Uranium(II) Metallocenes—A Local Vibrational Mode Study

Uranium metallocenes have recently attracted attention driven by their use as catalysts in organometallic synthesis. In addition to bent U(IV) and U(III), an U(II) metallocene [(η 5 -C 5 i Pr 5 ) 2 U] was synthesized with an unusual linear Cp–U–Cp angle. Here, in this work, we investigated 22 U(II) metallocenes, (i) assessing the intrinsic strength of the U-ring interactions in these complexes with a novel bond strength measure based on our local vibrational mode analysis and (ii) systematically exploring what makes these U(II) metallocenes bent. We included relativistic effects through the NESCau Hamiltonian and complemented the local mode analysis with natural bonding orbital (NBO) and quantum theory of atoms in molecules (QTAIM) data. Our study led to the following results: (i) reduction of bulky U-ring ligand substituents does not lead to bent complexes for alkyl substituents ( i Pr and i Bu) in contrast to SiMe 3 ring substituents, which are all bent. (ii) The most bent complexes are [(η 5 -C 5 H 4 SiMe 3 ) 2 U] (130°) and [η 5 -P 5 H 5 ) 2 U] (143°). (iii) Linear complexes showed one hybridized NBO with s/d character, while bent structures were characterized by s/d/f mixing. (iv) We did not observe a correlation between the strength of the U-ring interaction and the amount of the ring-U-ring bend; the strongest interaction was found for [η 5 -Cp) 2 U] and the weakest for [η 5 -P 5 H 5 ) 2 U]. In conclusion, our results provide a foundation for the design of U(II) metallocenes with specific physicochemical properties and increased reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Crystalline Order Yet Glass-Like Heat Transport Driven by Hidden Local Distortions as the Structural Origin of Ultralow Thermal Conductivity in AgErTe 2

Given their rich chemical diversity and the interplay among the p-, d-, and f-orbitals of chalcogens, transition metals, and lanthanides, respectively, rare-earth transition-metal chalcogenides exhibit a wide variety of structural, magnetic, and transport phenomena. As a result, they form a particularly appealing platform for investigating structure–property relationships, emergent electronic and magnetic behaviors, and thermal transport. Here we investigate AgErTe 2 as a model system to understand phonon-glass behavior in ordered crystalline solids, which establishes the design principles for thermal barrier coatings and next-generation thermoelectrics. The local bonding asymmetry and lattice softness suppress the inherently low lattice thermal conductivity, resembling the characteristics of amorphous materials. This suppression is significantly influenced by local off-centering of Ag atoms, which breaks lattice periodicity while maintaining global crystallinity. The presence of antibonding states just below the Fermi level, arising from Ag 4d and Te 5p orbital interactions, leads to lattice softening and destabilizes ideal tetrahedral coordination, resulting in a pseudo Jahn–Teller distortion. Furthermore, the coexistence of weaker, more polarizable Ag–Te bonds and stronger Er–Te bonds creates a complex vibrational landscape enriched with low-frequency modes and enhanced phonon scattering. A pronounced disparity in interatomic force constants gives rise to highly localized, low-energy optical phonons linked to Ag rattling. These flat vibrational modes exhibit strong coupling with transverse acoustic phonons, resulting in ultrashort phonon lifetimes and mean free paths approaching interatomic distances. These features collectively enhance phonon scattering across a broad range of length and energy scales. This work offers a framework for engineering suppressed thermal conductivity in crystalline systems without the introduction of alloying elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Microscopic origin of reflection-asymmetric nuclear shapes

The presence of nuclear ground states with stable reflection-asymmetric shapes is supported by rich experimental evidence. Theoretical surveys of odd-multipolarity deformations predict the existence of pear-shaped isotopes in several fairly localized regions of the nuclear landscape in the vicinity of near-lying single-particle shells with Δℓ = Δj = 3. We analyze the role of isoscalar, isovector, neutron-proton, neutron-neutron, and proton-proton multipole interaction energies in inducing the onset of reflection-asymmetric ground-state deformations. The calculations are performed in the framework of axial reflection-asymmetric Hartree-Fock-Bogoliubov theory using two Skyrme energy-density functionals and density-dependent pairing force. We show that reflection-asymmetric ground-state shapes of atomic nuclei are driven by the odd-multipolarity neutron-proton (or isoscalar) part of the nuclear interaction energy. This result is consistent with the particle-vibration picture, in which the main driver of octupole instability is the isoscalar octupole-octupole interaction giving rise to large E3 polarizability. The necessary condition for the appearance of localized regions of pear-shaped nuclei in the nuclear landscape is the presence of parity doublets involving Δℓ = Δj = 3 proton or neutron single-particle shells. This condition alone is, however, not sufficient to determine whether pear shapes actually appear, and, if so, what the corresponding reflection-asymmetric deformation energies are. The predicted small reflection-asymmetric deformation energies result from dramatic cancellations between even- and odd-multipolarity components of the nuclear binding energy.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

High-pressure CO 2 dissociation with nanosecond pulsed discharges

Herein we investigate the conversion of CO 2 into CO and O 2 with nanosecond repetitively pulsed (NRP) discharges in a high-pressure batch reactor. Stable discharges are obtained at up to 12 bar. By-products are measured with gas chromatography. The energy efficiency is determined for a range of processing times, pulse energy, and fill pressures. It is only weakly sensitive to the plasma operating parameters, i.e the extent of CO 2 conversion is almost linearly-dependent on the specific energy invested. A conversion rate as high as 14% is achieved with an energy efficiency of 23%. For long processing times, saturation in the yield and a drop in efficiency are observed, due to the increasing role of three-body recombination reactions, as described by zero-dimensional detailed kinetic modeling. The modeling reveals the presence of three-stage kinetics between NRP pulses, controlled by electron-impact CO 2 dissociation, vibrational relaxation, and neutral elementary kinetics. Transport effects are shown to be important for CO 2 conversion at high pressures. For fill pressures beyond 10 bar, CO 2 may locally transit into supercritical states. The supercritical plasma kinetics may bypass atomic oxygen pathways and directly convert CO 2 into O 2 . This work provides a detailed analysis of plasma-based high-pressure CO 2 conversion, which is of great relevance to future large-scale sustainable carbon capture, utilization, and storage.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Assessment of thermally driven local structural phase changes in 1⁢𝑇′−MoTe 2

The role of layer disorder is important in establishing the topological phases of MoTe 2 . A rich tapestry of atomic ordering influences the structural phase transitions (SPTs), but there is little understanding of the mechanistic details of the phase transition. An atomistic level study was conducted to investigate the local structure of the 1⁢𝑇′ and 𝑇 𝑑 phases of MoTe 2 by using the pair distribution function (PDF) technique. While the average structure exhibits an SPT and coexistence of phases as a function of temperature, the local structure showed the suppression of SPT. The sample retained its monoclinic structure at all temperatures in short-range order. A sharp PDF peak observed at short distances indicated a strong atom-atom correlation between the Mo and Te atoms within the Mo octahedra. In addition, a large-box modeling of the PDF data indicated a preferential motion of Te atoms towards 𝑐 axis at all temperatures. Structural defects, such as stacking faults, likely result in the coexistence of phases in the average structure and suppress the local SPT of MoTe 2 . These results are stepping stones to understand the long-debated origins of structural, vibrational, and electronic properties of MoTe 2 and similar transition metal dichalcogenides.

2-dimensional systems↗
DOE OSTI2026

Bond Dissociation Energies of the Actinide Halides AnX, An = Ac–Lr and X = F–I, Utilizing Relativistic Composite Coupled Cluster Approaches

Bond dissociation energies (BDEs) have been calculated for the set of actinide halides AnX with An=Ac, Pa, and Np-Lr and X=F-I. Two composite thermochemistry methods based on the Feller-Peterson-Dixon (FPD) approach have been utilized, one involving spinor-based relativistic CCSD(T) calculations where spin-orbit (SO) was included at the orbital level and another using scalar relativistic CCSD(T) with a posteriori SO contributions based on 2-component multireference configuration interaction calculations. The method that was chosen for a given actinide halide was based on which representation yielded the best single determinant reference determinant for the coupled cluster calculation. The spinor-based method was chosen for all cases except for AmX, CmX, and BkX. Both composite approaches included contributions accounting for basis set truncation, outer-core correlation, the Gaunt interaction, and QED. The scalar FPD results, as well as the spinor-based calculations for AcF, also included higher order electron correlation up through CCSDT(Q). In addition to BDEs, CCSD(T) equilibrium bond lengths, harmonic frequencies, and vibrational anharmonicity constants are reported for all species. Last, the FPD BDEs for the fluorides were used to confirm the trend across the actinide series previously predicted by Gibson using bonding models based atomic promotion energies that provide a single 6d electron for bonding. In particular the local minimum in the BDEs at AmF is confirmed in the present calculations. Furthermore, the BDEs for LrX are predicted to be slightly larger than those of AcX, making them the largest in the actinide halide series.

Actinides↗
DOE OSTI2025

Completely Multipolar Model for Many-Body Water–Ion and Ion–Ion Interactions

This work constructs an advanced force field, the Completely Multipolar Model (CMM), to quantitatively reproduce each term of an energy decomposition analysis (EDA) for aqueous solvated alkali metal cations and halide anions and their ion pairings. We find that all individual EDA terms remain well-approximated in the CMM for ion-water and ion-ion interactions, except for polarization, which shows errors due to the partial covalency of ion interactions near their equilibrium. We quantify the onset of the dative bonding regime by examining the change in molecular polarizability and Mayer bond indices as a function of distance, showing that partial covalency manifests by breaking the symmetry of atomic polarizabilities while strongly damping them at short-range. This motivates an environment-dependent atomic polarizability parameter that depends on the strength of the local electric field experienced by the ions to account for strong damping, with anisotropy introduced by atomic multipoles. The resulting CMM model for ions provides accurate dimer surfaces and three-body polarization and charge transfer compared to EDA, and shows excellent performance on various ion benchmarks including vibrational frequencies and cluster geometries.

Heindel, Joseph P↗
DOE OSTI2021

Attosecond Intramolecular Scattering and Vibronic Delays

We study the temporal and vibrational signature of the universal nuclear recoil associated with the electron emission and intramolecular scattering that accompanies the photoelectric effect. We illustrate these phenomena in the photoionization of the CO molecule from the C-1s orbital using an analytical model that reproduces the entangled character of the nuclear and electronic motion in this process. We show that the photoelectron emission delay can be decomposed into its localization and resonant-confinement components. Photoionization by a broadband x-ray pulse results in a coherent vibrational ionic state delayed compared to the classical sudden-photoemission limit.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Generalized approach for rapid entropy calculation of liquids and solids

We build a comprehensive methodology for the fast computation of entropy across both solid and liquid phases. The proposed method utilizes a single trajectory of molecular dynamics (MD) to facilitate the calculation of entropy, which is composed of three components. The electronic entropy is determined through the temporal average acquired from density functional theory MD simulations. The vibrational entropy, typically the predominant contributor to the total entropy, even within the liquid state, is evaluated by computing the phonon density of states via the velocity autocorrelation function. The most arduous component to quantify, the configurational entropy, is assessed by probability analysis of the local structural arrangement and atomic distribution. We illustrate, through a variety of examples, that this method is both a versatile and valid technique for characterizing the thermodynamic states of both solids and liquids. Furthermore, this method is employed to expedite the calculation of melting temperatures, demonstrating its practical utility in computational thermodynamics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Violation of the T –1 Relationship in the Lattice Thermal Conductivity of Mg 3 Sb 2 with Locally Asymmetric Vibrations

Most crystalline materials follow the guidelines of T –1 temperature-dependent lattice thermal conductivity (κ L ) at elevated temperatures. Here, we observe a weak temperature dependence of κ L in Mg 3 Sb 2 , T –0.48 from theory and T –0.57 from measurements, based on a comprehensive study combining ab initio molecular dynamics calculations and experimental measurements on single crystal Mg 3 Sb 2 . These results can be understood in terms of the so-called “phonon renormalization” effects due to the strong temperature dependence of the interatomic force constants (IFCs). The increasing temperature leads to the frequency upshifting for those low-frequency phonons dominating heat transport, and more importantly, the phonon-phonon interactions are weakened. In-depth analysis reveals that the phenomenon is closely related to the temperature-induced asymmetric movements of Mg atoms within MgSb 4 tetrahedron. With increasing temperature, these Mg atoms tend to locate at the areas with relatively low force in the force profile, leading to reduced effective 3 rd -order IFCs. The locally asymmetrical atomic movements at elevated temperatures can be further treated as an indicator of temperature-induced variations of IFCs and thus relatively strong phonon renormalization. The present work sheds light on the fundamental origins of anomalous temperature dependence of κ L in thermoelectrics.

36 MATERIALS SCIENCE↗