Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lifting transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Lift enhancement by an externally trapped vortex

A theoretical study is made of the performance capabilities of a lift concept that utilizes a spanwise vortex over the upper surface of the wing. The vortex is generated by a vertical flap near the leading edge of the wing and maintained by suction through orifices in endplates at the wingtip. The analysis approximates the three-dimensional flow field with a two-dimensional configuration that is mapped by conformal transformation into the flow about a circle. Theoretical solutions for a range of flap and orifice configurations predict that section lift coefficients up to around 10 can be achieved. It is concluded that such a lift concept is applicable to STOL aircraft if the vortex can be adequately stabilized and if the endplate suction can be generated efficiently.

Rossow, V. J.↗

Development and application of a program to calculate transonic flow around an oscillating three-dimensional wing using finite difference procedures

A finite difference method for solving the unsteady transonic flow about harmonically oscillating wings is investigated. The procedure is based on separating the velocity potential into steady and unsteady parts and linearizing the resulting unsteady differential equation for small disturbances. The differential equation for the unsteady potential is linear with spatially varying coefficients and with the time variable eliminated by assuming harmonic motion. Difference equations are derived for harmonic transonic flow to include a coordinate transformation for swept and tapered planforms. A pilot program is developed for three-dimensional planar lifting surface configurations (including thickness) for the CRAY-XMP at Boeing Commercial Airplanes and for the CYBER VPS-32 at the NASA Langley Research Center. An investigation is made of the effect of the location of the outer boundaries on accuracy for very small reduced frequencies. Finally, the pilot program is applied to the flutter analysis of a rectangular wing.

Weatherill, Warren H.↗

On the general theory of thin airfoils for nonuniform motion

General thin-airfoil theory for a compressible fluid is formulated as boundary problem for the velocity potential, without recourse to the theory of vortex motion. On the basis of this formulation the integral equation of lifting-surface theory for an incompressible fluid is derived with the chordwise component of the fluid velocity at the airfoil as the function to be determined. It is shown how by integration by parts this integral equation can be transformed into the Biot-Savart theorem. A clarification is gained regarding the use of principal value definitions for the integral which occur. The integral equation of lifting-surface theory is used a s the starting point for the establishment of a theory for the nonstationary airfoil which is a generalization of lifting-line theory for the stationary airfoil and which might be called "lifting-strip" theory. Explicit expressions are given for section lift and section moment in terms of the circulation function, which for any given wing deflection is to be determined from an integral equation which is of the type of the equation of lifting-line theory. The results obtained are for airfoils of uniform chord. They can be extended to tapered airfoils. One of the main uses of the results should be that they furnish a practical means for the analysis of the aerodynamic span effect in the problem of wing flutter. The range of applicability of "lifting-strip" theory is the same as that of lifting-line theory so that its results may be applied to airfoils with aspect ratios as low as three.

BIBLIOGRAPHY-WINGS↗

Authoring, Analyzing, and Monitoring Requirements for a Lift-Plus-Cruise Aircraft

Requirements specification and analysis is widely applied to ensure the correctness of industrial systems in safety critical domains. Requirements are often initially written in natural language, which is highly ambiguous, and as a second step transformed into a language with rigorous semantics for formal analysis. In this paper, we report on our experience in requirements creation and analysis, as well as run-time monitor generation using the Formal Requirement Elicitation Tool (FRET), on an industrial case study for a Lift-Plus-Cruise concept aircraft. We study the creation of requirements directly in the structured language of FRET without a prior definition of the same requirements in natural language. We focus on requirements describing state machines and discuss the challenges that we faced, in terms of creating requirements and generating monitors. We demonstrate how realizability, i.e., checking whether a requirements specification can be implemented, is crucial for understanding temporal interdependencies among requirements. Our study is the first complete attempt at using FRET to create industrial, realizable requirements and generate run-time monitors. Insight from lessons learned was materialized into new features in the FRET and JKind analysis frameworks.

Requirements engineering↗

Authoring, Analyzing, and Monitoring Requirements for a Lift-Plus-Cruise Aircraft

Requirements specification and analysis is widely applied to ensure the correctness of industrial systems in safety critical domains. Requirements are often initially written in natural language, which is highly ambiguous, and as a second step transformed into a language with rigorous semantics for formal analysis. [Question/problem] In this paper, we report on our experience in requirements creation and analysis, as well as run-time monitor generation using the Formal Requirement Elicitation Tool (FRET), on an industrial case study for a Lift-Plus-Cruise concept aircraft. [Principal ideas/results] We study the creation of requirements directly in the structured language of FRET without a prior definition of the same requirements in natural language. We focus on requirements describing state machines and discuss the challenges that we faced, in terms of creating requirements and generating monitors. We demonstrate how realizability, i.e., checking whether a requirements specification can be implemented, is crucial for understanding temporal interdependencies among requirements. [Contribution] Our study is the first complete attempt at using FRET to create industrial, realizable requirements and generate run-time monitors. Insight from lessons learned was materialized into new features in the FRET and JKind analysis frameworks.

Requirements engineering↗

Backward boundary layers in downward flame spread

The gas-phase combustion of a vertical fuel slab pyrolyzing at a finite rate under downward flame spread conditions is investigated theoretically. The backward boundary layer character of the flow is exploited, and a transformation that shifts the singularity associated with boundary-layer equations to a location, upstream of flame lift-off, where the surface temperature is nearly ambient, is employed. The boundary-layer flow is matched asymptotically for large Grashof number to a potential flow that allows the flow induced by the flame and along the upstream surface of the fuel bed to be calculated. Gas-phase temperature and velocity predictions are compared to experiment, and although analysis of the gas phase is emphasized, an approximate spread rate, based on a solid-phase energy balance, is calculated.

Vedha-Nayagam, M.↗

Description of Panel Method Code ANTARES

Panel method code ANTARES was developed to compute wall interference corrections in a rectangular wind tunnel. The code uses point doublets to represent blockage effects and line doublets to represent lifting effects of a wind tunnel model. Subsonic compressibility effects are modeled by applying the Prandtl-Glauert transformation. The closed wall, open jet, or perforated wall boundary condition may be assigned to a wall panel centroid. The tunnel walls can be represented by using up to 8000 panels. The accuracy of panel method code ANTARES was successfully investigated by comparing solutions for the closed wall and open jet boundary condition with corresponding Method of Images solutions. Fourier transform solutions of a two-dimensional wind tunnel flow field were used to check the application of the perforated wall boundary condition. Studies showed that the accuracy of panel method code ANTARES can be improved by increasing the total number of wall panels in the circumferential direction. It was also shown that the accuracy decreases with increasing free-stream Mach number of the wind tunnel flow field.

Ulbrich, Norbert↗

Planetary engineering

Assuming commercial fusion power, heavy lift vehicles and major advances in genetic engineering, the authors survey possible late-21st century methods of working major transformations in planetary environments. Much more Earthlike climates may be produced on Mars by generating low freezing point greenhouse gases from indigenous materials; on Venus by biological conversion of CO2 to graphite, by canceling the greenhouse effect with high-altitude absorbing fine particles, or by a sunshield at the first Lagrangian point; and on Titan by greenhouses and/or fusion warming. However, in our present state of ignorance we cannot guarantee a stable endstate or exclude unanticipated climatic feedbacks or other unintended consequences. Moreover, as the authors illustrate by several examples, many conceivable modes of planetary engineering are so wasteful of scarce solar system resources and so destructive of important scientific information as to raise profound ethical issues, even if they were economically feasible, which they are not. Global warming on Earth may lead to calls for mitigation by planetary engineering, e.g., emplacement and replenishment of anti-greenhouse layers at high altitudes, or sunshields in space. But here especially we must be concerned about precision, stability, and inadvertent side-effects. The safest and most cost-effective means of countering global warming - beyond, e.g., improved energy efficiency, CFC bans and alternative energy sources - is the continuing reforestation of approximately 2 times 107 sq km of the Earth's surface. This can be accomplished with present technology and probably at the least cost.

Pollack, James B.↗

Technology Assessment for Large Vertical-Lift Transport Tiltrotors

The technical community has identified rotor efficiency as a critical enabling technology for large vertical-lift transport (LVLT) rotorcraft. The size and performance of LVLT aircraft will be far beyond current aircraft capabilities, enabling a transformational change in cargo transport effectiveness. Two candidate approaches for achieving high efficiency were considered for LVLT applications: a variable-diameter tiltrotor (VDTR) and a variable-speed tiltrotor (VSTR); the former utilizes variable-rotor geometry and the latter utilizes variable-rotor speed. Conceptual aircraft designs were synthesized for the VDTR and VSTR and compared to a conventional tiltrotor (CTR). The aircraft were optimized to a common objective function and bounded by a set of physical- and requirements-driven constraints. The resulting aircraft were compared for weight, size, performance, handling qualities, and other attributes. These comparisons established a measure of the relative merits of the variable-diameter and -speed rotor systems as enabling technologies for LVLT capability.

Germanowski, Peter J.↗

Control optimization of a lifting body entry problem by an improved and a modified method of perturbation function

A study of the solution problem of a complex entry optimization was studied. The problem was transformed into a two-point boundary value problem by using classical calculus of variation methods. Two perturbation methods were devised. These methods attempted to desensitize the contingency of the solution of this type of problem on the required initial co-state estimates. Also numerical results are presented for the optimal solution resulting from a number of different initial co-states estimates. The perturbation methods were compared. It is found that they are an improvement over existing methods.

Garcia, F., Jr.↗

On some reciprocal relations in the theory of nonstationary flows

In the theory of nonstationary flows about airfoils, the "indicial lift" function ksub1(s) of Wagner and the "alternating lift" function c(k) of Theodorsen have fundamental significance. This paper reports on some interesting relations of the nature of Fourier transforms that exist between these functions. General problems in transient flows about airfoils may be given a unified broad treatment when these functions are employed. Certain approximate results also are reported which are of notable simplicity, and an analogy with transient electrical flows is drawn.

Garrick, I E↗

Effect of compressibility on the nonlinear prediction of the aerodynamic loads on lifting surfaces

The vortex-lattice technique for incompressible flow which accounts for separation at sharp edges is modified to account for compressibility. This is accomplished by extending the Prandtl-Glauert transformation to moderate angles of attack. Thus, the aerodynamic characteristics for the compressible case are obtained from the solution of an equivalent incompressible problem. Numerical results are presented for parallelogram and delta wings to assess the effects of compressibility. The results are in good agreement with available experimental data.

Kandil, O. A.↗

Applications of Laplace transform methods to airfoil motion and stability calculations

This paper reviews the development of generalized unsteady aerodynamic theory and presents a derivation of the generalized Possio integral equation. Numerical calculations resolve questions concerning subsonic indicial lift functions and demonstrate the generation of Kutta waves at high values of reduced frequency, subsonic Mach number, or both. The use of rational function approximations of unsteady aerodynamic loads in aeroelastic stability calculations is reviewed, and a reformulation of the matrix Pade approximation technique is given. Numerical examples of flutter boundary calculations for a wing which is to be flight tested are given. Finally, a simplified aerodynamic model of transonic flow is used to study the stability of an airfoil exposed to supersonic and subsonic flow regions.

Edwards, J. W.↗

A direct application of the non-linear inverse transformation flight control system design on a STOVL aircraft

The nonlinear inverse transformation flight control system design method is applied to the Lockheed Ft. Worth Company's E-7D short takeoff and vertical land (STOVL) supersonic fighter/attack aircraft design with a modified General Electric F110 engine which has augmented propulsive lift capability. The system is fully augmented to provide flight path control and velocity control, and rate command attitude hold for angular axes during the transition and hover operations. In cruise mode, the flight control system is configured to provide direct thrust command, rate command attitude hold for pitch and roll axes, and sideslip command with turn coordination. A control selector based on the nonlinear inverse transformation method is designed specifically to be compatible with the propulsion system's physical configuration which has a two dimensional convergent-divergent aft nozzle, a vectorable ventral nozzle, and a thrust augmented ejector. The nonlinear inverse transformation is used to determine the propulsive forces and nozzle deflections, which in combination with the aerodynamic forces and moments (including propulsive induced contributions), and gravitational force, are required to achieve the longitudinal and vertical acceleration commands. The longitudinal control axes are fully decoupled within the propulsion system's performance envelope. A piloted motion-base flight simulation was conducted on the Vertical Motion Simulator (VMS) at NASA Ames Research Center to examine the handling qualities of this design. Based on results of the simulation, refinements to the control system have been made and will also be covered in the report.

Chung, W. W.↗

Longitudinal dynamic stability of a shuttle vehicle.

Analytical study of the longitudinal dynamic stability of a nonrolling, lifting vehicle gliding at hypersonic speeds. The analysis applies to shuttle vehicles designed for operating up to the rim of a planetary atmosphere. A general nondimensional time transformation is introduced to derive a unified second-order linear differential equation for the angle of attack, valid for all types of reentry of a general type of vehicle. The stability of motion is discussed for two fundamental regimes of flight that are based on widely different assumptions. For near ballistic entry along a straight line trajectory, the equation reduces to a confluent hypergeometric equation, the solution of which can be expressed in terms of Whittaker's function. Using a theorem in the theory of stability of differential equations, criteria for damped oscillations are derived. It is shown that the aerodynamic criteria for stability are the same as for the case of ballistic entry. In addition, for each vehicle configuration, and specified planetary atmosphere, there exists an altitude range where the angle of attack frequency is nearly equal to the orbital frequency causing instability in pitch. This resonance instability is due to the ellipticity of the orbit. Criteria for eccentricity instability are derived.

Vinh, N. X.↗

Transonic potential flow and coordinate generation for bodies in a wind tunnel

An accurate method has been developed for computation of transonic potential flow about a 2-D lifting airfoil or an axisymmetric body in a wind tunnel. The computational mesh is nearly orthogonal everywhere and is generated by a sequence of Schwarz-Christoffel transformations and shearings to obtain an '0' grid near the body. A conservative finite-volume scheme for the full-potential equation and exact boundary conditions is used together with 'retarded' density to solve efficiently transonic flow with embedded shocks and large regions of supersonic flow. Supersonic free-stream flows are also solved with captured bow shocks and embedded subsonic regions.

Doria, M. L.↗

Unsteady lift forces on highly cambered airfoils moving through a gust

An unsteady airfoil theory in which the flow is linearized about the steady potential flow of the airfoil is presented. The theory is applied to an airfoil entering a gust. After transformation to the W-plane, the problem is formulated in terms of a Poisson's equation. The solutions are expanded in a Fourier-Bessel series. The theory is applied to a circular arc with arbitrary camber. Closed form expressions for the velocity and pressure on the surface of the airfoil are obtained. The unsteady aerodynamic forces are then calculated and shown to contain two terms. One in an explicit closed analytical form represents the contribution of the oncoming vortical disturbance, the other depends on a single quadrature and accounts for the effect of the wake.

Atassi, H.↗