SEARCH · Engineering Papers

Results for “legged locomotion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS1998

Running in the real world: adjusting leg stiffness for different surfaces

A running animal coordinates the actions of many muscles, tendons, and ligaments in its leg so that the overall leg behaves like a single mechanical spring during ground contact. Experimental observations have revealed that an animal's leg stiffness is independent of both speed and gravity level, suggesting that it is dictated by inherent musculoskeletal properties. However, if leg stiffness was invariant, the biomechanics of running (e.g. peak ground reaction force and ground contact time) would change when an animal encountered different surfaces in the natural world. We found that human runners adjust their leg stiffness to accommodate changes in surface stiffness, allowing them to maintain similar running mechanics on different surfaces. These results provide important insight into mechanics and control of animal locomotion and suggest that incorporating an adjustable leg stiffness in the design of hopping and running robots is important if they are to match the agility and speed of animals on varied terrain.

NASA Discipline Musculoskeletal↗

NASA NTRS1964

Vehicle Walks on Varied Terrain, Can Assist Handicapped Persons

The problem: Designing a vehicle capable of traversing varied terrain at moderate speeds (up to 4 miles per hour). Development of such a vehicle was originally undertaken to meet NASA requirements for a remotely controlled instrument carrier to be used for unmanned exploration of lunar and planetary surfaces. The solution: A battery-powered motorized vehicle with three pairs of legs that are connected to push rods and a series of linkages. How it's done: Locomotion of the basic vehicle is accomplished by three pairs of legs, one pair in the front and two pairs in the rear. Each leg consists of an upper horizontal portion, a middle vertical portion, and a foot. Two cams connected to the drive mechanism (a small motor, gearbox, and push rods) control the motion of the legs. The two outer rear legs move in unison with the right front leg, and the two inner rear legs move in unison with the left front leg. Each set of three legs is lifted to clear or rest on any expected obstacle on the terrain to be traversed by the vehicle and advanced a fixed distance for the succeeding step. A system of spring-loaded vertical-motion linkages permits obstacles (within design limitations) to be traversed with a minimum disturbance of the vehicle's axes. The linkages are arranged to permit the legs to be folded when the vehicle is stored. Steering is accomplished by a small motor, which swings the front pair of legs to the desired angle. The rear legs are connected by a differential linkage to compensate for the required variation in step length or speed between the right and left pairs of rear legs when turns are made.

Source record↗

NASA NTRS1993

Evolving directions in NASA's planetary rover requirements and technology

This paper reviews the evolution of NASA's planning for planetary rovers (i.e. robotic vehicles which may be deployed on planetary bodies for exploration, science analysis, and construction) and some of the technology that has been developed to achieve the desired capabilities. The program is comprised of a variety of vehicle sizes and types in order to accommodate a range of potential user needs. This includes vehicles whose weight spans a few kilograms to several thousand kilograms; whose locomotion is implemented using wheels, tracks, and legs; and whose payloads vary from microinstruments to large scale assemblies for construction. We first describe robotic vehicles, and their associated control systems, developed by NASA in the late 1980's as part of a proposed Mars Rover Sample Return (MRSR) mission. Suggested goals at that time for such an MRSR mission included navigating for one to two years across hundreds of kilometers of Martian surface; traversing a diversity of rugged, unknown terrain; collecting and analyzing a variety of samples; and bringing back selected samples to the lander for return to Earth. Subsequently, we present the current plans (considerably more modest) which have evolved both from technological 'lessons learned' in the previous period, and modified aspirations of NASA missions. This paper describes some of the demonstrated capabilities of the developed machines and the technologies which made these capabilities possible.

Weisbin, C. R.↗

NASA NTRS1993

Evolving directions in NASA's planetary rover requirements and technology

The evolution of NASA's planning for planetary rovers (that is robotic vehicles which may be deployed on planetary bodies for exploration, science analysis, and construction) and some of the technology that was developed to achieve the desired capabilities is reviewed. The program is comprised of a variety of vehicle sizes and types in order to accommodate a range of potential user needs. This includes vehicles whose weight spans a few kilograms to several thousand kilograms; whose locomotion is implemented using wheels, tracks, and legs; and whose payloads vary from microinstruments to large scale assemblies for construction. Robotic vehicles and their associated control systems, developed in the late 1980's as part of a proposed Mars Rover Sample Return (MRSR) mission, are described. Goals suggested at the time for such a MRSR mission included navigating for one to two years across hundreds of kilometers of Martian surface; traversing a diversity of rugged, unknown terrain; collecting and analyzing a variety of samples; and bringing back selected samples to the lander for return to Earth. Current plans (considerably more modest) which have evolved both from technological 'lessons learned' in the previous period, and modified aspirations of NASA missions are presented. Some of the demonstrated capabilities of the developed machines and the technologies which made these capabilities possible are described.

Weisbin, C. R.↗

NASA NTRS2004

Bone Research and Animal Support of Human Space Exploration: Where do we go from here?

NASA exploration goals include returning humans to the moon by 20 15-2020 as a prelude for human exploration of Mars and beyond. The number of human flight subjects available during this very short time period is insufficient to solve high-risk problems without data from animals. This presentation will focus on three questions: What do we know? What do we need to know? Where do we go from here?: roles for animals in the exploration era. Answers to these questions are based on flight and ground-based models using humans and animals. First, what do we know? Adult humans have spent less than 1% of their lifespan in space while juvenile rats have spent almost 2%. This information suggests that our data are rather meager for projecting to a 30-month mission to Mars. The space platforms for humans have included Skylab, STS/MIR, and STS/ISS and for animals have included the unmanned Bion series and shuttle. The ground-based models include head-down bedrest in humans (BR) and hindlimb unloading in rodents (HU). We know that as gravity decreases, the impact forces generated by the body during locomotion decrease. For example, on Earth, your legs supports approximately 1 body weight (BW) when standing, 1.33BW when walking, and 3BW when jogging. On Mars, the same activity would generate 0.38BW standing, 0.5BW walking, and 1BW when jogging. In space, no impact load is generated, as gravity is minimal.

Morey-Holton, Emily R.↗

NASA NTRS2021

ReQuBiS - Reconfigurable Quadrupedal-Bipedal Snake Robots

Self-assembling and self-reconfiguring robots have the ability to adapt to different or varying environments and carry out complex tasks. Robots competent of performing serpentine gaits and transforming into legged systems impart a wide range of locomotion schemes. Most of the reconfigurable robotic solutions consist of a large number of complicated mechanisms to detach and re-attach at different places making the system fragile and increase its size, weight and power (SWaP). We propose Reconfigurable Quadrupedal-Bipedal Snake Robots (ReQuBiS) to easily transform into these forms. Experimental results demonstrate the mobility in snake, quadruped and biped modes and transition between them with minimal change in modules.

Chiddarwar, Shital↗

NASA NTRS2005

Small Dog-Like Quadruped Robot Powered With McKibben Air Muscles

Planetary surface robotic exploration is typically done by wheeled robots, which are limited to traveling on relatively flat terrain. The goal of this project was to design a bio-inspired robot to mimic the movements and agility of animals to navigate in various types of natural terrain, such as found on Mars. My objective for the summer was to design and construct a quadruped robot with a locomotion gait similar to a small dog. The design includes four legs and an actuated flexible spine for added mobility and performance; each leg has three joints - hip, knee, and ankle. I created 3D CAD models and machined the pieces for the assemblies of each part. One of the key areas of concern is weight vs. power issues for the driving force of locomotion. To maximize the power-to-weight ratio, I used McKibben air muscles to drive the motion of the quadruped. The prototype went through several iterations to analyze performance, with adjustments made to each assembly. We expect the final working prototype will be capable of standing unassisted and pronking into the air without active control. It will serve as a research platform for future bio-inspired control algorithms.

Lacy, John M.↗

NASA NTRS2007

Zero-Gravity Locomotion Simulators: New Ground-Based Analogs for Microgravity Exercise Simulation

Maintaining health and fitness in crewmembers during space missions is essential for preserving performance for mission-critical tasks. NASA's Exercise Countermeasures Project (ECP) provides space exploration exercise hardware and monitoring requirements that lead to devices that are reliable, meet medical, vehicle, and habitat constraints, and use minimal vehicle and crew resources. ECP will also develop and validate efficient exercise prescriptions that minimize daily time needed for completion of exercise yet maximize performance for mission activities. In meeting these mission goals, NASA Glenn Research Center (Cleveland, OH, USA), in collaboration with the Cleveland Clinic (Cleveland, Ohio, USA), has developed a suite of zero-gravity locomotion simulators and associated technologies to address the need for ground-based test analog capability for simulating in-flight (microgravity) and surface (partial-gravity) exercise to advance the health and safety of astronaut crews and the next generation of space explorers. Various research areas can be explored. These include improving crew comfort during exercise, and understanding joint kinematics and muscle activation pattern differences relative to external loading mechanisms. In addition, exercise protocol and hardware optimization can be investigated, along with characterizing system dynamic response and the physiological demand associated with advanced exercise device concepts and performance of critical mission tasks for Exploration class missions. Three zero-gravity locomotion simulators are currently in use and the research focus for each will be presented. All of the devices are based on a supine subject suspension system, which simulates a reduced gravity environment by completely or partially offloading the weight of the exercising test subject s body. A platform for mounting treadmill is positioned perpendicularly to the test subject. The Cleveland Clinic Zero-g Locomotion Simulator (ZLS) utilizes a pneumatic subject load device to apply a near constant gravity-replacement load to the test subject during exercise, and is currently used in conjunction with the General Clinical Research Center for evaluating exercise protocols using a bedrest analog. The enhanced ZLS (eZLS) at NASA Glenn Research Center features an offloaded treadmill that floats on a thin film of air and interfaces to a force reaction frame via variably-compliant isolators, or vibration isolation system. The isolators can be configured to simulate compliant interfaces to the vehicle, which affects mechanical loading to crewmembers during exercise, and has been used to validate system dynamic models for new countermeasures equipment designs, such as the second International Space Station treadmill slated for use in 2010. In the eZLS, the test subject and exercise device can be pitched at the appropriate angle for partial gravity simulations, such as lunar gravity (1/6th earth gravity). On both the eZLS and the NASA-Johnson Space Center standalone ZLS installed at the University of Texas Medical Branch in Galveston, Texas, USA, the subject's body weight relative to the treadmill is controlled via a linear motor subject load device (LM-SLD). The LM-SLD employs a force-feedback closed-loop control system to provide a relatively constant force to the test subject during locomotion, and is set and verified for subject safety prior to each session. Locomotion data were collected during parabolic flight and on the eZLS. The purpose was to determine the similarities and differences between locomotion in actual and simulated microgravity. Subjects attained greater amounts of hip flexion during walking and running during parabolic flight. During running, subjects had greater hip range of motion. Trunk motion was significantly less on the eZLS than during parabolic flight. Peak impact forces, loading rate, and impulse were greater on the eZLS than during parabolic while walking with a low external load (EL) and rning with a high EL. Activation timing differences existed between locations in all muscles except for the rectus femoris. The tibialis anterior and gluteus maximus were active for longer durations on the eZLS than in parabolic flight during walking. Ground reaction forces were greater with the LM-SLD than with bungees during eZLS locomotion. While the eZLS serves as a ground-based analog, researchers should be aware that subtle, but measurable, differences in kinematics and leg musculature activities exist between the environments. Aside from space applications, zero-gravity locomotion simulators may help medical researchers in the future with development of rehabilitative or therapeutic protocols for injured or ill patients. Zero-gravity locomotion simulators may be used as a ground-based test bed to support future missions for space exploration, and eventually may be used to simulate planetary locomotion in partial gravity environments, including the Moon and Mars. Figure: Zero-gravity Locomotion Simulator at the Cleveland Clinic, Cleveland, Ohio, USA

Perusek, Gail P.↗

NASA NTRS2020

Material Remodelling and Unconventional Gaits Facilitate Locomotion of a Robophysical Rover Over Granular Terrain

Autonomous robots and vehicles must occasionally recover from locomotion failure in loosely consolidated granular terrain. Recent mobility challenges led NASA Johnson Space Center to develop a prototype robotic lunar rover Resource Prospector 15 (RP15) capable of wheeled, legged, and crawling behavior. To systematically understand performance of such a device, we developed a scaled-down rover robot and studied its locomotion on slopes of dry and wet granular media. Addition of a cyclic legged gait to the robot’s wheel spinning action changes the robot dynamics from that of a wheeled vehicle to a locomotor paddling through frictional fluid. Granular drag force measurements and modified Resistive Force Theory facilitate modeling of such dynamics. A peculiar gait strategy that agitates and cyclically reflows grains under the robot allows it to ‘swim’ up loosely consolidated hills. Whereas substrate disturbance typically hinders locomotion in granular media, the multi-mode design of RP15 and a diversity of possible gaits facilitate formation of self-organized localized frictional fluids that enable effective robust transport.

Siddharth Shrivastava↗

NASA NTRS1997

The Kinematics of Treadmill Locomotion in Space

Locomotion on a treadmill in 0 G will probably remain a centerpiece of NASA's exercise countermeasures programme. This form of physical activity has the potential to cause large bone and muscle forces as well as loading during a period of continuous treadmill exercise. A critical concern is the provision of a treadmill which can approximate 1 G performance in space. At this point, no adequate objective measurements of in-flight treadmill kinetics or of the human response to this activity have been made. Interpretation of the results obtained in the present study is limited by the following: (1) bungee tensions were not measured; (2) ground reaction forces were not measured in parallel with the kinematic measurements; and (3) the instrumentation used to film the astronauts could itself have been affected by microgravity. Despite these shortcomings, what is apparent is that exercise during NASA missions STS 7 and STS 8 resulted in leg motions that were similar to those found during 1 G locomotion on an inclined passive treadmill and on an active treadmill at an even steeper grade. In addition, it was apparent that the majority of the loads were transmitted through the forefoot, and one can surmise that this style of running would result in physiologically significant tensions in the calf musculature and resultant ankle compressive loading. Further speculation regarding limb loading is complicated by the fact that varying amounts of force are transmitted through (1) the treadmill handle and (2) bungee cords that act as a tether. New generations of treadmills are being manufactured that could provide I important information for planners of long-duration space missions. If these types of treadmill are flown on future missions, it will be possible to control bungee tensions more precisely, control for grade and speed, and, most importantly, provide data on the rates and magnitudes of limb loading. These data could then be incorporated into biomechanical models of the lower limb to more fully understand mechanisms of load transmission from distal to proximal structures and to optimize in-flight exercise protocols in such a way that muscle and bone loss could be reduced.

Thornton, W. E.↗

NASA NTRS1989

Distributed neural control of a hexapod walking vehicle

There has been a long standing interest in the design of controllers for multilegged vehicles. The approach is to apply distributed control to this problem, rather than using parallel computing of a centralized algorithm. Researchers describe a distributed neural network controller for hexapod locomotion which is based on the neural control of locomotion in insects. The model considers the simplified kinematics with two degrees of freedom per leg, but the model includes the static stability constraint. Through simulation, it is demonstrated that this controller can generate a continuous range of statically stable gaits at different speeds by varying a single control parameter. In addition, the controller is extremely robust, and can continue the function even after several of its elements have been disabled. Researchers are building a small hexapod robot whose locomotion will be controlled by this network. Researchers intend to extend their model to the dynamic control of legs with more than two degrees of freedom by using data on the control of multisegmented insect legs. Another immediate application of this neural control approach is also exhibited in biology: the escape reflex. Advanced robots are being equipped with tactile sensing and machine vision so that the sensory inputs to the robot controller are vast and complex. Neural networks are ideal for a lower level safety reflex controller because of their extremely fast response time. The combination of robotics, computer modeling, and neurobiology has been remarkably fruitful, and is likely to lead to deeper insights into the problems of real time sensorimotor control.

Beer, R. D.↗

NASA NTRS1997

A Biomechanical Comparison of 1-G and Fully-Loaded Simulated Zero-Gravity Locomotion

Exercise will almost certainly play an integral part in minimizing the bone mineral loss and muscular atrophy that occur during spaceflight. It has been hypothesized that an effective exercise regimen can be developed to elicit loads on the lower extremities and require muscle actions which resemble those encountered on Earth. The Penn State Zero-Gravity Simulator (PSZS) is a device which suspends subjects horizontally from multiple latex cords, with each cord negating the weight of a limb segment. A treadmill mounted on the wall under the PSZS enables subjects to run in simulated 0G. Subjects wear a harness to which a number of springs, which provide a gravity replacement load, are connected. The opposite end of each spring is connected to the side of the treadmill. During exercise, astronauts currently wear a similar harness in which the spring tethering load pulls at both the waist and shoulders. Ground reaction forces, muscular activations, and joint angles of the left leg during overground, treadmill, and fully-loaded zero-gravity simulated (ZLS) locomotion were assessed in order to gain insight into the effectiveness of the exercise regimen used by NASA to prevent the muscular atrophy and bone demineralization which occur in weightlessness. There were three hypotheses to this research. It was hypothesized that there will be no differences in peak ground reaction forces and peak loading rates between overground gait and gait in the full body weight loaded conditions in the ZLS. A second hypothesis was that that there will be no differences in hip, knee, and ankle joint positions between walking or running overground, on a standard treadmill, and in full bodyweight loaded conditions in the ZLS. The third hypothesis was that the muscular activations, as a percentage of maximal voluntary contraction, will be similar between walking or running overground, on a standard treadmill, and in full body-weight loaded conditions in the ZLS.

McCrory, Jean L.↗

NASA NTRS2003

Using Tri-Axial Accelerometers to Assess the Dynamic Control of Head Posture During Gait

Long duration spaceflight is known to cause a variety of biomedical stressors to the astronaut. One of the more functionally destabilizing effects of spaceflight involves microgravity-induced changes in vestibular or balance control. Balance control requires the integration of the vestibular, visual, and proprioceptive systems. In the microgravity environment, the normal gravity vector present on Earth no longer serves as a reference for the balance control system. Therefore, adaptive changes occur to the vestibular system to affect control of body orientation with altered, or non-present, gravity and/or proprioceptive inputs. Upon return to a gravity environment, the vestibular system must re-incorporate the gravity vector and gravity-induced proprioceptive inputs into the balance control regime. The result is often a period of postural instability, which may also be associated with space motion sickness (oscillopsia, nausea, and vertigo). Previous studies by the JSC Neuroscience group have found that returning astronauts often employ alterations in gait mechanics to maintain postural control during gait. It is believed that these gait alterations are meant to decrease the transfer of heel strike shock energy to the head, thus limiting the contradictory head and eye movements that lead to gait instability and motion sickness symptoms. We analyzed pre- and post-spaceflight tri-axial accelerometer data from the NASA/MIR long duration spaceflight missions to assess the heel to head transfer of heel strike shock energy during locomotion. Up to seven gait sessions (three preflight, four postflight) of head and shank (lower leg) accelerometer data was previously collected from six astronauts who engaged in space flights of four to six months duration. In our analysis, the heel to head transmission of shock energy was compared using peak vertical acceleration (a), peak jerk (j) ratio, and relative kinetic energy (a). A host of generalized movement variables was produced in an effort to isolate those that best highlighted vestibular adaptation due to spaceflight. Data suggest that astronauts used either head or body centered control to reduce the effects of heel strike shock on head position during normal walking at self-selected speeds. Moreover, the form of that control appears to fall under one of two categories: homeostatic or adaptive. Homeostatic control refers to tight constraint (small error) over the value of a given variable before and after spaceflight with little or no adaptive changes. Adaptive control refers to lesser constraint over a given movement variable with clear adaptation to earth gravity upon return from spaceflight. Heel strike shock absorption (ratio of heel to head peak acceleration) best-discriminated head and body centered control strategies. Further, peak jerk data was useful for illustrating pre- and postflight differences in segmental (shank versus head) movement energy. Results from kinetic energy analysis show high consistency between subjects and across test dates. Whether this result highlights a control strategy or is an artifact of approximating body segments using anthropometric tables is, at this point, unclear.

Lawrence, John H., III↗

NASA NTRS1994

Biologically-inspired hexapod robot design and simulation

The design and construction of a biologically-inspired hexapod robot is presented. A previously developed simulation is modified to include models of the DC drive motors, the motor driver circuits and their transmissions. The application of this simulation to the design and development of the robot is discussed. The mechanisms thought to be responsible for the leg coordination of the walking stick insect were previously applied to control the straight-line locomotion of a robot. We generalized these rules for a robot walking on a plane. This biologically-inspired control strategy is used to control the robot in simulation. Numerical results show that the general body motion and performance of the simulated robot is similar to that of the robot based on our preliminary experimental results.

Espenschied, Kenneth S.↗

NASA NTRSDate not supplied

LASSIE: Legged Autonomous Surface Science In Analogue Environments

Roving planetary surface exploration missions operate using a pre-programmed plan that can limit the capability to effectively detect unexpected changes in terrain properties, adjust locomotion or sampling strategies, and autonomously identify scientifically valuable observations and adjust exploration strategies. In particular, the inability to measure and react to unexpected changes in regolith properties can negatively impact mission operations. The Mars Exploration Rover Spirit and InSight lander both experienced challenges related to understanding the geotechnical properties of regolith. The advancements in legged robotic platforms hold potential to address these challenges through greater sensitivity to changing surface properties. The Legged Autonomous Surface Science In Analogue Environments (LASSIE) project explores how legged roving platforms can use the leg motors to measure geotechnical properties of crusted and icy surface regolith and utilize those measurements to autonomously update the science operations plans. These tests will be performed in martian and lunar analog environments and also within lab settings.

K. R. Fisher↗

NASA NTRS1989

Semi-autonomous design concepts for a Mars rover

Studies of rover mobility and surface rendezvous for a Mars Rover/Sample Return (MRSR) mission have been performed. The objective of these efforts has been to identify and address the most challenging issues and develop the most promising design options for the rover mobility and navigation subsystems. A series of trade studies culminated in three candidate design concepts: a large, but otherwise conventional four-wheel drive vehicle; a sophisticated and agile six-legged walking vehicle; and a greatly simplified legged vehicle. This paper summarizes the key design features for these three concepts. For each design, the approaches to vehicle locomotion, sensing and navigation are discussed first. Timelines are developed for the adopted concepts of operation which constrain the range of the remaining parameters. Estimates of rover mass, volume, and power are provided, and performance is projected for vehicle range, terrain traversibility and navigation accuracy.

Spiessbach, Andrew J.↗

NASA NTRS1982

Effect of simulated weightlessness on energy metabolism in the rat

Results of measurements of food uptake and body weight changes occurring in rats suspended from a harness so that the antigravity muscles were not used for locomotion are presented. The rats were tested in pairs, with both in a harness but only one suspended off its hind legs; this section lasted 7 days. A second phase of the experiment involved feeding the nonsuspended rat the same amount of food the experimental rat had consumed the previous day. All rats experienced decreased in body weight and food intake in the first stage, while in the second stage the suspended rat lost more weight. The total oxygen uptake, CO2 output, and rate of C-14O2 production were depressed in the suspended rats, then returned to normal levels once the rats were back on the ground. It is concluded that the gross metabolic processes are unaffected by simulated weightlessness.

Jordan, J. P.↗

NASA NTRS1999

Anticipatory Postural Activity During Long-Duration Space Flight

Somatosensory input has been used to modify motor output in many contexts. During space flight, the use of the lower limb musculature is much less than during activities in 1g. Consequently the neuromuscular activity of the legs is also reduced during space flight. This decrease in muscle activity contributes to muscle atrophy. Furthermore, adaptations to weightlessness contribute to posture and locomotion problems upon the return to Earth. Providing techniques to counter the negative effects of weightlessness on the neuromuscular system is an important goal, particularly during a long-duration mission. Previous work by our group has shown that lower limb neuromuscular activation that normally precedes arm movements in 1g is absent or greatly reduced during similar movements made while freefloating. However, preliminary evidence indicates that applying pressure to the feet results in enhanced neuromuscular activation during rapid arm movements performed while freefloating. This finding suggests that sensory input can be used to "drive" the motor system to increase neuromuscular functioning throughout a mission. The purpose of this investigation was to quantify the increase in neuromuscular activation resulting from the application of pressure to the feet.

Layne, C. S.↗