Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “jet”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2009

Blowout Jets: Evidence from Hinode/XRT for X-Ray Jets Made by Blowout Eruption of the Emerging Bipole

Yamauchi et al (2004, ApJ, 605, 511) found that there are two structurally and dynamically distinct types of H macrospicules in polar coronal holes: single-column jet macrospicules and erupting-loop macrospicules. The structure and motion of the single-column jet macrospicules fit the standard Shibata reconnection picture for solar X-ray jets (Shibata et al 1992, PASJ, 44, L173). The form and motion of the erupting-loop macrospicules is reminiscent of the ejective eruption of the sheared-core-field flux rope in the filament-eruption birth of a bubble-type coronal mass ejection (CME). That roughly half of all polar H macrospicules were observed to be erupting-loop macrospicules suggests that there should be a corresponding large class of X-ray jets in which the emerging bipole at the base of the jet undergoes a blowout eruption as in a bubble-type CME, instead of staying closed as in the standard picture for X-ray jets. Along with a cartoon of the standard picture, we present a cartoon depicting the signatures to be expected of a blowout jet in high-resolution coronal X-ray movies such as from Hinode/XRT. From Hinode/XRT movies in polar coronal holes, we show: (1) examples of X-ray jets that fit the standard picture very well, and (2) other examples that do not fit the standard picture but do show signatures appropriate for blowout jets. These signatures are (1) a flare arcade inside the emerging bipole in addition to the flare arcade produced between the emerging bipole and the ambient high-reaching unipolar field by reconnection of these two fields as in the standard picture, and (2) in addition to the jet prong expected from the standard reconnection, a second jet prong or strand, one that could not be produced by the standard reconnection but could be produced by reconnection between the ambient unipolar field and one leg of an erupting core-field flux rope that has blown out the emerging bipole. We therefore infer that these "two pronged" jets are made by miniature versions of the sheared-core-bipole explosions that produce bubble-type CMEs. This work was funded by NASA s Science Mission Directorate through the Heliophysics Guest Investigators Program, the Hinode Project, and the Living With a Star Targeted Research and Technology Program.

Moore, Ronald L.↗
NASA NTRSDate not supplied

Design and Analysis of A Jet Stretcher for High-Altitude Supersonic Free Jet Testing

A jet stretcher can be used to extend the region of clean flow for a test article in a supersonic free jet. The device acts to shield the article from shock waves reflected from the free jet shear layer. It can also allow for overexpanded nozzle operation through blocking shocks emanating from the nozzle lip, enlarging the potential test envelope. The FUN3D computational fluid dynamics solver was used to test a design process for developing jet stretchers. The inner surface of the axisymmetric jet stretcher was obtained from a streamline extracted from a free flight simulation around a notional test article at the intended test condition of Mach 3.2, 53,000 ft. The test article and jet stretcher were then simulated in a free jet nozzle exhaust, and the flowfield within a notional inlet aperture was compared between the installed and free flight calculations. Ambient pressure was increased until separation within the free jet nozzle finally induced disturbances at the inlet. The jet stretcher was shown to provide clean flow to the inlet at cell pressure ratios up to 2.8. A process for trimming the axisymmetric jet stretcher was also tested. This was intended to provide blockage relief for complex test articles, aiding with starting, as well as reducing weight and fabrication cost. The trimmed jet stretcher performed identically to the axisymmetric model at slightly-overexpanded conditions, but at cell pressure ratios above 1.3 allowed disturbances from the trailing edge to reach the inlet.

free jet↗
NASA NTRSDate not supplied

Design and Analysis of A Jet Stretcher for High-Altitude Supersonic Free Jet Testing

A jet stretcher can be used to extend the region of clean flow for a test article in a supersonic free jet. The device acts to shield the article from shock waves reflected from the free jet shear layer. It can also allow for overexpanded nozzle operation through blocking shocks emanating from the nozzle lip, enlarging the potential test envelope. The FUN3D computational fluid dynamics solver was used to test a design process for developing jet stretchers. The inner surface of the axisymmetric jet stretcher was obtained from a streamline extracted from a free flight simulation around a notional test article at the intended test condition of Mach 3.2, 53,000 ft. The test article and jet stretcher were then simulated in a free jet nozzle exhaust, and the flowfield within a notional inlet aperture was compared between the installed and free flight calculations. Ambient pressure was increased until separation within the free jet nozzle finally induced disturbances at the inlet. The jet stretcher was shown to provide clean flow to the inlet at cell pressure ratios up to 2.8. A process for trimming the axisymmetric jet stretcher was also tested. This was intended to provide blockage relief for complex test articles, aiding with starting, as well as reducing weight and fabrication cost. The trimmed jet stretcher performed identically to the axisymmetric model at slightly overexpanded conditions, but at cell pressure ratios above 1.3 allowed disturbances from the trailing edge to reach the inlet.

free jet↗
DOE OSTI2025

Constraining color-charge effects of partonic energy loss with jet-axis-based inclusive jet substructure measurement

This study investigates the color-charge dependence of parton energy loss in the quark-gluon plasma (QGP) medium and the associated relative modifications of quark and gluon jet fractions compared to vacuum, using jet axis decorrelation observables. Recent CMS jet axis decorrelation measurements in PbPb collisions at 5.02 TeV are interpreted using Pythia simulations with varied quark/gluon jet compositions and emulated color-charge dependent energy loss. A template-fit procedure is employed to estimate the limits on gluon jet fractions in the published CMS data and average shift in jet momentum due to quenching for quark- and gluon-initiated jets traversing the QGP. The extracted gluon jet fractions and the estimated quark and gluon energy losses based on this study of jet axis decorrelations are found to be consistent with other model calculations based on inclusive observables. This work illustrates the use of jet substructure measurements for providing constraints on the color-charge dependence of parton energy loss and offers valuable insights for jet quenching models.

jet quenching↗
NASA NTRS1960

Spatial Characteristics of Water Spray Formed by Two Impinging Jets at Several Jet Velocities in Quiescent Air

The spatial characteristics of a spray formed by two impinging water jets in quiescent air were studied over a range of nominal jet velocities of 30 to 74 feet per second. The total included angle between the 0.089-inch jets was 90 deg. The jet velocity, spray velocity, disappearance of the ligaments just before drop formation, mass distribution, and size and position of the largest drops were measured in a circumferential survey around the point of jet impingement. Photographic techniques were used in the evaluations. The distance from the point of jet impingement to ligament breakup into drops was about 4 inches on the spray axis and about 1.3 inches in the radial position +/-90 deg from the axis. The distance tended to increase slightly with increase in jet velocity. The spray velocity varied from about 99 to about 72 percent of the jet velocity for a change in circumferential position from the spray axis to the +/-80 deg positions. The percentages tended to increase slightly with an increase in jet velocity. Fifty percent of the mass was distributed about the spray axis in an included angle of slightly less than 40 deg. The effect of jet velocity was small. The largest observed drops (2260-micron or 0.090-in. diam.) were found on and about the spray axis. The size of the largest drops decreased for an increase in radial angular position, being about 1860 microns (0.074 in.) at the +/-90 deg positions. The largest drop sizes tended to decrease for an increase in jet velocity, although the velocity effect was small. A drop-size distribution analysis indicated a mass mean drop size equal to 54 percent of an extrapolated maximum drop size.

Foster, Hampton H.↗
DOE OSTI2025

Search for medium effects using jet axis decorrelation in inclusive jets from PbPb collisions at $\sqrt{{s}_{\text{NN}}}$ = 5.02 TeV

The jet axis decorrelation in inclusive jets is studied using lead-lead (PbPb) collisions at a center-of-mass energy per nucleon pair of 5.02 TeV. The jet axis decorrelation is defined as the angular difference between two definitions of the jet axis. It is obtained by applying two recombination schemes on all the constituents of a given jet reconstructed by the anti-kT sequential algorithm with a distance parameter of R = 0.4. The data set, corresponding to an integrated luminosity of 0.66 nb −1 , was collected in 2018 with the CMS detector at the CERN LHC. The jet axis decorrelations are examined across collision centrality selections and intervals of jet transverse momentum. A centrality dependent evolution of the measured distributions is observed, with a progressive narrowing seen in more central events. This narrowing could result from medium-induced modification of the internal jet structure or reflect color charge effects in energy loss. This new measurement probes jet substructure in previously unexplored kinematic domains and show great promise for providing new insights on the color charge dependence of energy loss to jet-quenching models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS2014

Twin Jet Effects on Noise of Round and Rectangular Jets: Experiment and Model

Many subsonic and supersonic aircraft concepts proposed by NASA's Fundamental Aeronautics Program have asymmetric, integrated propulsion systems. The asymmetries in the exhaust of these propulsion systems create an asymmetric acoustic field. The asymmetries investigated in the current study are from twin jets and rectangular nozzles. Each effect produces its own variation of the acoustic field. An empirical model was developed to predict the acoustic field variation from round twin jets with twin jet spacing from 2.6 to 5.6, where s is the center-to-center spacing over the jet diameter. The model includes parameters to account for the effects of twin jet spacing, jet static temperature ratio, flight Mach number, frequency, and observer angle (both polar and azimuthal angles). The model was then applied to twin 2:1 and 8:1 aspect ratio nozzles to determine the impact of jet aspect ratio. For the round and rectangular jets, the use of the model reduces the average magnitude of the error over all frequencies, observation angles, and jet spacings by approximately 0.5dB when compared against the assumption of adding two jets incoherently.

Noise↗
NASA NTRS1977

Effects of jet decay rate on jet induced loads on a flat plate

Experimental modelling of the interaction between a jet and an aircraft wing or fuselage in VTOL aircraft was undertaken using a cold jet exiting perpendicular to a flat plate in a uniform cross-flow. Effects of jet decay rate and jet-to-cross-flow velocity ratio, R, on the induced load distribution were investigated. Jet decay rate was increased by using cylindrical centerbodies submerged in the jet nozzle, which caused nonuniform initial jet velocity profiles. Quicker jet decay rate, corresponding to the presence of a centerbody, resulted in as much as 50% reduction in the induced pressure loads on the plate. This has implications in interpretation of results from earlier VTOL model studies of jet induced loads, where the jets have often had relatively slow decay rates due to uniform initial velocity profiles

Kuhlman, J. M.↗
NASA NTRS1978

The free jet as a simulator of forward velocity effects on jet noise

A thorough theoretical and experimental study of the effects of the free-jet shear layer on the transmission of sound from a model jet placed within the free jet to the far-field receiver located outside the free-jet flow was conducted. The validity and accuracy of the free-jet flight simulation technique for forward velocity effects on jet noise was evaluated. Transformation charts and a systematic computational procedure for converting measurements from a free-jet simulation to the corresponding results from a wind-tunnel simulation, and, finally, to the flight case were provided. The effects of simulated forward flight on jet mixing noise, internal noise and shock-associated noise from model-scale unheated and heated jets were established experimentally in a free-jet facility. It was illustrated that the existing anomalies between full-scale flight data and model-scale flight simulation data projected to the flight case, could well be due to the contamination of flight data by engine internal noise.

Ahuja, K. K.↗
NASA NTRS1959

Jet Effects on the Base Pressure of a Cylindrical Afterbody with Multiple-Jet Exits

A wind-tunnel investigation to determine the effects of multiple-jet exits on the base pressure of a cylindrical afterbody has been conducted at Mach numbers from 0.6 to 1.4. The number of jets has been varied from one to six; the diameter of the convergent nozzles has also been varied. Jet total-pressure ratio ranged up to approximately 10. The results show that the jet total-pressure ratio at which peak negative pressures occur on the base decreased as the ratio of jet diameter to base diameter was increased; increasing jet area by increasing the number of jets at constant diameter also resulted in a shift of the peak negative pressure toward lower jet total-pressure ratios. With three or more jets symmetrically arranged on the base, a region of super-ambient pressure was found near the center of the base region at high jet total-pressure ratios.

Scott, William R.↗
NASA NTRS1946

Characteristics of a Hot Jet Discharged from a Jet-Propulsion Engine

An investigation of a heated jet was conducted in conjunction with tests of an axial-flow jet-propulsion engine in the Cleveland altitude wind tunnel. Pressure and temperature surveys were made across the jet 10 and 15 feet behind the jet-nozzle outlet of the engine. Surveys were obtained at pressure altitudes of 10,000, 20,000, 30,000, and 40,000 feet with test-section velocities from 30 to 110 feet per second and test-section temperatures from 60 F to -50 F. From measurements taken throughout the operable range of engine speeds, tail-pipe outlet temperatures from 500 F to 1250 F and jet velocities from 400 to 2200 feet per second were obtained. The jet-survey data presented extend the work previously done with low-velocity and low-temperature jets to the region of high velocities and high temperatures. The results obtained agree with previously determined experimental data and with predicted theoretical expressions for the dimensionless transverse velocity and temperature profiles across a jet. The spread of both the temperature and the velocity profiles was very nearly linear. Dimensionless plots of temperature and velocity along the axis of a heated jet agree with experimental results of tests with a cold jet.

Fleming, William A.↗
NASA NTRS2007

Hydrodynamical Simulations of the Jet in the Symbiotic Star MWC 560: Application to X-ray Jets in Symbiotic Stars - 3

In Papers I and II in this series, we presented hydrodynamical simulations of jet models with parameters representative of the symbiotic system MWC 560. These were simulations of a pulsed, initially underdense jet in a high-density ambient medium. Since the pulsed emission of the jet creates internal shocks and since the jet velocity is very high, the jet bow shock and the internal shocks are heated to high temperatures and should therefore emit X-ray radiation. In this paper, we investigate in detail the X-ray properties of the jets in our models. We have focused our study on the total X-ray luminosity and its temporal variability, the resulting spectra, and the spatial distribution of the emission. Temperature and density maps from our hydrodynamical simulations with radiative cooling presented in the second paper are used, together with emissivities calculated with the atomic database ATOMDB. The jets in our models show extended and variable X-ray emission, which can be characterized as a sum of hot and warm components with temperatures that are consistent with observations of CH Cyg and R Aqr. The X-ray spectra of our model jets show emission-line features that correspond to observed features in the spectra of CH Cyg. The innermost parts of our pulsed jets show iron line emission in the 6.4-6.7 keV range, which may explain such emission from the central source in R Aqr. We conclude that MWC 560 should be detectable with Chandra or XMM-Newton, and such X-ray observations will prove crucial for understanding jets in symbiotic stars.

hydrodynamics↗
NASA NTRS2008

Jet-Front Speed and the Origin of Jets in Polar Coronal Holes

The area-average strength of the open magnetic field in the polar coronal holes can be estimated from the radial component of the magnetic field measured by Ulysses in the solar wind, the fraction of the solar sphere covered by the polar coronal holes, and the fraction of the heliosphere filled by the fast solar wind from the polar coronal holes. For the present minimum phase of the solar cycle, the estimated strength is approximately 10 G. Using this strength for the ambient open field in the standard reconnection model for jets in coronal holes, we obtain for any given jet-front speed a lower bound on the initial temperature of the expanding jet-front plasma, and an upper bound on the ambient plasma density at the reconnection site. These two bounds indicate the following. For jet-front speeds of approximately 1000 km/s, (1) the reconnection site has to be in the low corona or upper transition region (n(e) is less than 10(exp 9) cm(exp -3)), not in the lower transition region or chromosphere, (2) the jet-front plasma is initially heated to T greater than approximately 10(exp 7) K, and (3) hence a compact X-ray flare is produced at the base of the jet. For jet-front speeds less than approximately 100 km/s, (1) the jet can be produced by reconnection in the lower transition region (approximately 10(exp 9) less than n(e) less than approximately 10(exp 10) cm(exp-3)) or upper chromosphere (approximately 10(exp 10) less than n(e) less than approximately 10(exp 12) cm-3), (2) the initial temperature of the jet-front plasma can be less than 10(exp 6) K, and (3) hence some EUV and H(alpha) jet-type macrospicules may be produced with no detectable X-ray emission.

Moore, Ron↗
NASA NTRS1982

Into Mesh Lubrication of Spur Gears with Arbitrary Offset Oil Jet. 2: for Jet Velocities Equal to or Greater than Great Velocity

An analysis was conducted for into mesh oil jet lubrication with an arbitrary offset and inclination angle from the pitch point for the case where the oil jet velocity is equal to or greater than gear pitch line velocity. Equations were developed for minimum and maximum oil jet impingement depth. The analysis also included the minimum oil jet velocity required to impinge on the gear or pinion and the optimum oil jet velocity required to obtain the best lubrication condition of maximum impingement depth and gear cooling. It was shown that the optimum oil jet velocity for best lubrication and cooling is when the oil jet velocity equals the gear pitch line velocity. When the oil jet velocity is slightly greater than the pitch line velocity the loaded side of the driven gear and the unloaded side of the pinion receive the best lubrication and cooling with slightly less impingement depth. As the jet velocity becomes much greater than the pitch line velocity the impingement depth is considerably reduced and may completely miss the pinion.

Akin, L. S.↗
NASA NTRS1999

Development of an Empirical Methods for Predicting Jet Mixing Noise of Cold Flow Rectangular Jets

This report presents an empirical method for predicting the jet mixing noise levels of cold flow rectangular jets. The report presents a detailed analysis of the methodology used in development of the prediction method. The empirical correlations used are based on narrow band acoustic data for cold flow rectangular model nozzle tests conducted in the NASA Langley Jet Noise Laboratory. There were 20 separate nozzle test operating conditions. For each operating condition 60 Hz bandwidth microphone measurements were made over a frequency range from 0 to 60,000 Hz. Measurements were performed at 16 polar directivity angles ranging from 45 degrees to 157.5 degrees. At each polar directivity angle, measurements were made at 9 azimuth directivity angles. The report shows the methods employed to remove screech tones and shock noise from the data in order to obtain the jet mixing noise component. The jet mixing noise was defined in terms of one third octave band spectral content, polar and azimuth directivity, and overall power level. Empirical correlations were performed over the range of test conditions to define each of these jet mixing noise parameters as a function of aspect ratio, jet velocity, and polar and azimuth directivity angles. The report presents the method for predicting the overall power level, the average polar directivity, the azimuth directivity and the location and shape of the spectra for jet mixing noise of cold flow rectangular jets.

Russell, James W.↗
NASA NTRS1999

Effects of Jet Swirl on Mixing of a Light Gas Jet in a Supersonic Airstream

A non reacting experiment was performed to investigate the effects of jet swirl on mixing of a light gas jet in a supersonic airstream. The experiment consisted of two parts. The first part was an investigation of the effects of jet swirl and skew on the mixing and penetration of a 25 deg. supersonic jet injected from a flat surface (flush wall injection) into a supersonic ducted airflow. Specifically, the objective was to determine whether the jet would mix more rapidly if the jet were swirling, and whether swirl, with and without skew, causes the injectant-air plume to have a net circulation (i.e., a single or dominant vortex). The second part was a preliminary study of the mixing of swirling jets injected from the base of a skewed ramp. The hypothesis was that favorable interactions between vorticity generated by the swirling jet and vortices generated by the ramp could produce mixing enhancements. Both parts of the experiment were conducted at equal injectant mass flow rate and total pressure. The results for the flush wall injection cases indicate that, except relatively close to the injection point, swirl, with or without skew, does not enhance the mixing of the jet, and can in fact reduce penetration. In addition, a plume with significant net circulation is not generated, as had previously been believed. The results for the ramp cases indicated no improvements in mixing in comparison with the baseline (swept ramp injector) case. However, it was not possible to determine the vorticity mechanisms underlying the poor performance, since no measurements of vorticity were made. Thus, since many geometric parameters were chosen arbitrarily, the results are inconclusive for this class of injector.

Doerner, Steven E.↗
NASA NTRS2003

Synthetic Jets in Cross-flow: Round Jet - Part 1

Results of an experimental investigation on synthetic jets from round orifices with and without cross-flow are presented. Jet Reynolds number up to 46,000 with a fully turbulent approach boundary layer, and Stokes number up to 400. are covered. The threshold of stroke length for synthetic jet formation. in the absence of the cross-flow, is found to be Lo /D approximately 0.5. Above Lo /D is approximately 10, the profiles of normalized centerline mean velocity appear to become invariant. It is reasoned that the latter threshold may be related to the phenomenon of saturation of impulsively generated vortices. In the presence of the cross-flow, the penetration height of a synthetic jet is found to depend on the momentum- flux ratio . When this ratio is defined in terms of the maximum jet velocity and the cross-flow velocity. not only all data collapse but also the jet trajectory is predicted well by correlation equation available for steady jets-in-cross-flow. Distributions of mean velocity, streamwise vorticity as well as turbulence intensity for a synthetic jet in cross-flow are found to be similar to those of a steady jet-in-cross-flow. A pair of counter-rotating streamwise vortices, corresponding to the bound vortex pair of the steady case, is clearly observed. Mean velocity distribution exhibits a dome of low momentum fluid pulled up from the boundary layer, and the entire domain is characterized by high turbulence.

Zaman, K. B. M. Q.↗
NASA NTRS2016

Simulation of Sweep-Jet Flow Control, Single Jet and Full Vertical Tail

This work is a simulation technology demonstrator, of sweep jet flow control used to suppress boundary layer separation and increase the maximum achievable load coefficients. A sweep jet is a discrete Coanda jet that oscillates in the plane parallel to an aerodynamic surface. It injects mass and momentum in the approximate streamwise direction. It also generates turbulent eddies at the oscillation frequency, which are typically large relative to the scales of boundary layer turbulence, and which augment mixing across the boundary layer to attack flow separation. Simulations of a fluidic oscillator, the sweep jet emerging from a nozzle downstream of the oscillator, and an array of sweep jets which suppresses boundary layer separation are performed. Simulation results are compared to data from a dedicated validation experiment of a single oscillator and its sweep jet, and from a wind tunnel test of a full-scale Boeing 757 vertical tail augmented with an array of sweep jets. A critical step in the work is the development of realistic time-dependent sweep jet inflow boundary conditions, derived from the results of the single-oscillator simulations, which create the sweep jets in the full-tail simulations. Simulations were performed using the computational fluid dynamics (CFD) solver Overow, with high-order spatial discretization and a range of turbulence modeling. Good results were obtained for all flows simulated, when suitable turbulence modeling was used.

flow control↗